A02 PSB OIL specifictions.xlsx
XLSX spreadsheet 13 KB Posted
- Attached to
- IDIQ Contract for Oil and Lubrication Products
- Solicitation number
- W912ES23Q0070
View the file
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Lubricants Specifications
| Lubricants Specifications | |||||||
| Conditions: We do not want to mix different lubricants as it may lead to a degradation of the lubricants performance and ultimately causing premature failure and/or damage to our equipment. Therefore, we will only accept the entire lubricant purchase from one manufacture to eliminate the potential of mixed oils within our equipment. | |||||||
| Lubricants Specification / Type / Application | Estimated | Minimum | Maximum | Maximum | |||
| Type | Application | Specifications, Properties, Manufacture Requirements & Service Ratings | Container sizes | Annual quantity | Order/Annual | Order | Annual |
| 75w90 Synthetic Gear Oil | Cutter Head & Carriage Drive Planetary Gears | Synthetic extreme pressure gear lubricant. Viscosity @ 40 degrees C per ASTM D-445 shall not be less than 103 Centistokes. The viscosity index per ASTM D-2270 shall not be less than 152. Full synthetic PAO lubricant | 16 Gallon kegs | 4 Kegs | 1 Keg | 5 Kegs | 10 Kegs |
| ISO 100 Machine Lube | Pump Radial / Thrust Bearing | 100% pure paraffin base mineral oil extreme pressure lubricant with soluble moly. The Viscosity @ 40 degrees C per ASTM D-445 shall not be less than 90 centistokes. The viscosity index per ASTM D-2270 shall not be less than 95. It shall meet and/or exceed Timken E.P test ASTM D-2782 "OK" load value of 65 lbs. Falex Continues Load Failure (ASTM D 3233) Lbs. 2500> | 5 Gallon Pails/55 Gallon drums | 10 Pails/3 Drums | 5 pails/1 Drum | 25 Pails/4 Drums | 30 Pails/6 Drums |
| ISO 220 Gear Lube | Pump Reduction Gears W/Filter | PAO Synthetic/mineral oil Blend extreme pressure lubricant with soluble moly. It must not contain any tacifiers as the oil must pass through a filtration system. The Viscosity @ 40 degrees C per ASTM D-445 shall not be less than 198 centistokes. The viscosity index per ASTM D-2270 shall not be less than 95. Falex Continues Load Failure (ASTM D 3233) Lbs. 2500>. - It shall meet and/or exceed Timken E.P test ASTM D-2782 "OK" load value of 70 lbs. | 5 Gallon Pails/55 Gallon drums | 33 Pails/4 Drums | 10 Pails/1 Drum | 40 Pails/4 Drums | 50 Pails/6 Drums |
| ISO 220 Gear Lube | Ladder & Spud Winches | Mineral oil extreme pressure gear lubricant with soluble moly with the addition of tacifiers as an additive package. The Viscosity @ 40 degrees C per ASTM D-445 shall not be less than 198 centistokes. The viscosity index per ASTM D-2270 shall not be less than 95. Falex Continues Load Failure (ASTM D 3233) Lbs. 2500> It shall meet and/or exceed Timken E.P test ASTM D-2782 "OK" load value of 65 lbs. | 5 Gallon Pails/55 Gallon drums | 33 Pails/4 Drums | 10 Pails/1 Drum | 40 Pails/4 Drums | 40 Pails/5 Drums |
| ISO 320 Gear Lube | Swing Winches | Mineral oil extreme pressure gear lubricant with soluble moly with the addition of tacifiers as an additive package. The Viscosity @ 40 degrees C per ASTM D-445 shall not be less than 288 centistokes. The viscosity index per ASTM D-2270 shall not be less than 95. Falex Continues Load Failure (ASTM D 3233) Lbs. 2500> It shall meet and/or exceed Timken E.P test ASTM D-2782 "OK" load value of 70 lbs. | 5 Gallon Pails/55 Gallon drums | 33 Pails/3 Drums | 10 Pails/1 Drum | 40 Pails/4 Drums | 40 Pails/ 6 Drums |
| 50 Wt. | General Warren 2083 Falk Hydraulic Clutch Marine Gears | PAO Synthetic/mineral oil Blend extreme pressure lubricant with soluble moly. The Viscosity @ 40 degrees C per ASTM D-445 shall not be less than 199 centistokes. The viscosity index per ASTM D-2270 shall not be less than 103. Timken EP Test (ASTM D-4172) must have a minimum "OK" Load of, 60bs. | |||||
| 5 Gallon Pails/55 Gallon drums | 25 Pails/6 Drums | 10 Pails/1 Drum | 40 Pails/10 Drums | 50 Pails/6 Drums | |||
| 15w-40 Synthetic / Blend | Caterpillar 3516 Diesel Engines | The PAO Synthetic / mineral oil Blend SAE 15W-40 engine oil must have soluble moly as a friction modifiers as an additive package. The Viscosity @ 40 degrees C per ASTM D-445 shall not be less than 111 Centistokes. The viscosity index per ASTM D-2270 shall not be less than 147. Evaporation loss per ASTM-5800 shall not exceed 10%. The total base number (TBN) per ASTM D-2896 shall not be less than 10. | 5 gallon Pails/55 Gallon drums | 25 Pails/20 Drums | 10 Pails/1 Drum | 40 Pails/40 Drums | 60 Pails/50 Drums |
| 10 Wt. Hydraulic Oil | Equipment Hydraulics Excavator - Bulldozers & Vessel Steering | PAO Synthetic/mineral oil Blend extreme pressure lubricant with soluble moly. The Viscosity @ 40 degrees C per ASTM D-445 shall not be less than 34 centistokes. The viscosity index per ASTM D-2270 shall not be less than 105. Timken EP Test (ASTM D-4172) must have a minimum "OK" Load of, 60bs. | 5 Gallon Pails/55 Gallon drums | 33 Pails/3 Drums | 6 Pails/1Drum | 44 Pails/8 Drums | 44 Pails/8 Drums |
| 30 Wt. TDTO | Transmissions (Caterpillar - ZF - Twin Disc) | PAO Synthetic/mineral oil Blend extreme pressure lubricant with soluble moly. The Viscosity @ 40 degrees C per ASTM D-445 shall not be less than 82 centistokes. The viscosity index per ASTM D-2270 shall not be less than 105. Timken EP Test (ASTM D-4172) must have a minimum "OK" Load of, 60bs. | 5 Gallon Pails/55 Gallon drums | 25 Pails/6 Drums | 10 Pails/1 Drum | 50 Pails/7 Drums | 50 Pails/8 Drums |
| Fuel Treatment | Fuel Barge Bunkers | Must be usable in treating ultra low sulfur diesel fuel. It must be registered and meets US EPA requirements for blending into low sulfur diesel fuels. The fuel additive must comply with federal low sulfur content requirements for use in diesel non-road engines. | 5 Gallon Pails | 40 Pails | 6 Pails | 60 Pails | 80 Pails |
File details come from the government source that posted it. Updated .