A01-MEC-PendoTech Sensor Data Acquisition System.pdf

PENDOTECH MINIMAL ESSENTIAL CHARACTERITICS

1. PENDOTECH DATA ACQUISITION SYSTEM (PDKT-PCS-DAQ-T)

INPUTS

• 4 pressure measurements with PendoTECH Pressure Sensors which can be re-used extensively or other pressure sensors/transducers optional pH (traditional probe) conductivity electrode

• 2 flowmeters with pulse/freq signal (each with standard calibration entry or manual calibration wizard)

• Air Detector (for air or liquid detection or can be used as an alarm)

• 2 scales (by serial RS232)

• 2 generic analog 4-20mA inputs (configured in software for range, units of measure, and digits of precision)

OTHER FEATURES

• PC software for graphical interface

• Critical alarms on pressures, pH, conductivity, and analog inputs

• Pre-alarm condition notifications with option to send email notifications

• Dry contact relay alarm signal (could be used to shut off a pump)

• Trending up to 8 parameters

• All data logged to a CSV file that is opened with Excel

• Manufactured in stainless steel enclosure

2. PENDOTECH BENCHTOP PHOTOMETER (SPEC-L-1-SU-280)

SPECS

• L = Lab

• 1 = Single wavelength unit

• SU = Optical couplers for use with single use flow cell

• XXX = Wavelength # 1, i.e. 280 nm)

OTHER FEATURES

• Optical Configuration — Absorbance, with LED Light Source and UV Silicone

Photodiode: Internal Source Reference (wavelengths available from 240- 1100) LED Lifetime > 5 years

• Transmitter Box o Optical connectivity via SMA905 o Power by 12 mm plug (bench mount)

• Dimensions (WxDxH) — L Version: 3.25 x 4.51 x 2.69 inch (82.55 x 114.55 x

68.33 mm)

• Power Requirement — 20-30 Volts DC (100-250VAC to 24VDC supply included with bench top unit)

• Output Signal — 4-20mA sourcing with 400ohm maximum at 24VDC via field wireable connectors (bench top)

3. PENDOTECH CABLE FROM CHANNEL 1 OF A SINGLE OR DUAL CHANNEL

PHOTOMETER TO PENDOTECH DAQ CONTROL SYSTEM (PDKT-UV1-PCS)

• Connects the Benchtop photometer to the Data Acquisition system

• mA, 6ft

4. PENDOTECH SINGLE USE UV FLOW CELL

• Several path lengths available for different turbidity ranges from 1/2 inch hosebarb fitting; 1cm path length to 1/8 inch hosebarb fitting; 2mm path length

• Unobstructed flow path & no dead legs

• Qualified for use to 75psi (5bar)

• Compatible with gamma irradiation & autoclavable

• All polymeric materials meet USP Class VI

• Each sensor is 100% tested for quality during manufacturing, including leak test

• Manufactured in a clean room in an FDA registered, ISO 13485 facility

• Caustic and chemical resistant polysulfone

• Lot Certificate of Quality included with each sensor

5. PENDOTECH SINGLE USE TEMPERATURE SENSOR

• Sizes range from 1/8inch hose barb to 3/4inch hose barb

• Compatible with gamma irradiation

• High sensitivity to temperature change

• Better than +/- 0.2°C accuracy (typ. better than 0.1) in the specified range of

0-70°C

• Polycarbonate (luer) or polysulfone (hosebarb sensors) material of construction

• NO calibration required, each is tested during manufacturing to be within specification

• All fluid path materials meet USP Class VI requirements

• Certificate of quality included

• Manufactured in a FDA Registered, ISO 13485 certified facility