A.02_Product Description_7N21Q0035.pdf

USACE Portland District – FY2021 Channels and Harbors

Plant Maintenance-Yard Shop

Product Description - Large Forklift Procurement

01. General

Procure a forklift with a minimum 30,000 lbs Capacity at 36.00” Load Center

02. References

Technical Standards: Forklift truck must conform to ANSI B56.1 standard, UL Classified Type D and LP

03. Submittals

Contractor shall submit quantity one (1) paper copy and quantity one (1) digital copy of technical manual and certifications

04. Specifications

Procure a forklift with a minimum 30,000 lbs at 36.00” Load Center. Forklift shall meet minimum requirements listed below.

a. Engine shall be Tier 4 compliant and diesel fuel only

b. Must have hard pneumatic tires and be able to transverse tough terrain

c. Must have Steering wheel spinner knob

d. Must have Full suspension safety seat

e. Minimum 8 feet long pallet forks

f. Must have Low fuel warning light

g. 121.5” mast (max fork height)

h. Minimum 96” long x 7.1” wide x 3.6” thick fork

i. Individual Side-shift and fork positioner

j. Carriage side shift capability, lift up and down capability, tilt forward and back capability

k. Must have Fully-featured, enclosed, heated and air conditioned operator cab.

l. Must have fully integrated lights for forward and reverse

m. When there is a load on the fork s at 4 feet in height the mast height must not exceed 13 feet and 9 inches.

05. Inspection

Technical representative(s) shall inspect forklift at delivery prior to acceptance.

06. Testing

Technical representative(s) shall test forklift at factory prior to acceptance.