A.02.10 Technical Specifications.pdf

TECHNICAL SPECIFICATIONS

LOWER MONUMENTAL LOCK & DAM

OPTO-22 GDACS COMPONENTS

1. INTENT:

The following specifications pertain to the purchase of Opto-22 critical components which will serve as modifications to the existing GDACS system systems at Lower Monumental Lock and Dam.

2. SCOPE:

The equipment requested will be used for replacing End Of Life components at Lower Monumental Dam for the Opto-22 Upgrades project for Walla Walla district. The Brand Name equipment requested will be used as part of the existing control system for the GDACS to provide an Intrusion Detection System (IDS) required by DOD 8500.2. GDACS is the automated power plant monitoring and control system for controlling power generation from Corps Northwestern Division (NWD) hydropower plants and other federal power plants that may be linked to the

NWD.

3. TECHNICAL SPECIFICATIONS:

The supplies listed below are to be implemented into current control systems for the Generic Data Acquisition Control Systems (GDACS). These supplies will meet the Intrusion Detection Systems requirements by DOD 8500.2.

Manufacturer Part Number Description Qty/ea.

Opto-22 SNAP-PAC-RCK-16 16 Rack Backplane 31

Opto-22 SNAP-PAC-EB2 Ethernet Module 31

Opto-22 SNAP-PS5 110VAC to 5V Power Supply

Opto-22 SNAP-AIV-I Input Module 3

Opto-22 SNAP-AIMA-I 0-20 mA Al Module

Opto-22 SNAP-IAC5 90-140 VAC/VDC Input Module

Opto-22 SNAP-AIRTD-10 3 Wire 10 Ohm RTD Analog Temp Input

Opto-22 SNAP-OAC5-I 12-250VAC Digital Output Module

Opto-22 SNAP-ODC5A-I 5-200 VDC Discrete Output Module

Opto-22 SNAP-TEX-CBS6 Straight Through Connector

Opto-22 SNAP-STRAPB Connector 6

Opto-22 SNAP-TEX-CBO6 Jumpered (Neutral) Connector

4. INSTRUCTIONS AND OPERATION MANUALS:

The hardware must come with two operation and maintenance manual hard copies and one electronic copy covering software and hardware setup, configuration, installation, maintenance, and warranty information.

5. WARRANTY:

All equipment in the technical specification above must be covered minimally by a twelve (12) month warranty from defects in material.

6. SHIPMENT AND DELIVERY:

All items shall be delivered FOB to Lower Monumental Project within ten (10) weeks of contract award. The contractor shall be responsible for packing and shipping the components in a manner that will ensure undamaged and complete arrival to Lower Monumental Project. No shipments are allowed other than normal business hours of Monday-Thursday 7:00 a.m. to 4:00 p.m. PST, excluding federal holidays.

All shipments shall be delivered to:

Lower Monumental Lock and Dam ATTN: Contract Performance Specialist 5520 Devils Canyon Road Kahlotus, WA 99335