A-1. MIL-O-82250 WOOL OVERCOAT.pdf

MIL-O-82250D(NU)

30 December 1983

SUPERSEDING

MIL-O-82250C(SA)

28 February 1977

MILITARY SPECIFICATION

ovERcoAT, w’s (OFFICER’S mPE)

This specification is approved for use by Navy Clothing and Textile Research Facility, Department of the ‘avYJ and is available for use by all

Departments and Agencies of the Department of Defense.

1. SCOPE

1.1 Scope. This specification covers the requirements for man’s dark blue wool melton double breasted overcoat.

1.2 Classification. The overcoats shall be of one type only, in the following sizes and lengths (see 6.2):

Sizes - 35, 36, 37, 38, 39, 40, 41, 42, 43, 44, 45, 46, 47, and 48 Lengths - Short, Regular, Long and Extra Long

2. APPLICABLE DOCUMENTS

2,1 Government documents

2.1.1 Specifications, standards, and handbooks Unless otherwise specified, the following specifications, standards and handbooks of the issue listed in that issue of the Department of Defense Index of Specifications and Standards (DoDISS) specified in the solicitation form a part of this specification to the extent specified.

SPECIFICATIONS

FEDERAL

V-B-871 - Button, Sewing Hole, and Button, Staple (plastic) v-T-276 - Thread, Cotton V-T-280 - Thread, Cimp, Cotton, Buttonhole V-T-285 - Thread, Polyester V-T- 295 - Thread, Nylon

V-T-301 - Thread, Silk

Beneficial comments (recommendations, additions> de~etions) and any pertinent data which may be of use in improving this document should be addressed to: Officer in Charge, Navy Clothing and Textile Research

Facility, 21 Strathmore Road, Natick, MA 01760) by using the self-addressed Standardization Document Improvement Proposal (DllForm 1426) appearing at the end of this document or by letter.

FSC 8405

Source: https://assist.dla.mil -- Downloaded: 2024-08-21T19:29Z Check the source to verify that this is the current version before use.

CCC-C-438 -

CCC-C-441 -

DDD-L-20 -

DDD-T-86 -

PPP-B-636 -

PPP-T-45 -

MILITARY

MIL-C-368 -

MIL-B-371 -

MIL-B-3461 -

MIL-P-15064 -

MIL-C-15065 -

MIL-C-16290 -

MIL-B-17757 -

MIL-T-43548 -

MIL-C-43718 -

STANDARDS

FEDERAL

FED-STD-751 -

FED-STD-191 -

MILITARY

MIL-STD-129 -

MIL-STD-1391 -

Cloth, Buckram, Cotton Cloth, Corduroy, Cotton Label; for Clothing, Equipage and Tentage (@neral Use) Tape, Textile; Cotton, General Purpose (Unbleached, Bleached, or Dyed) Boxes, Shipping, Fiberboard

Tape, Gummed, paper, Reinforced and Plain, for

Sealing and Securing

Cloth, Satin, Rayon and Cloth, Twill, Rayon

Braid, Textile, (Wbular) Button, Insignia, Metal, Uniform and Cap Pad, Shoulder and Sleeve-head Coat Fronts .

Cloth, Melton, Wool (Moth Proofed)

Box, Shipping, Fiberboard (Modular Sizes)

Thread, Polyester, Cotton-Covered and Rayon Covered Cloth, Twill, Polyester, Polyester and Cotton, Polyester and ?ayon

Stitches, Seams, and Stitchings Textile Test Methods

Marking for Shipment and Storage Provisions for Evaluating Quality of Overcoats, Yen’ s

(Copies of specifications, standards, drawings, and publications required by contractors in connection with specific procurement functions should be obtained from the procuring activity or as directed by the contracting officer.)

2.1.2 Other Government documents, drawings, and publications The following other Government documents, drawings, and publications form a Part of this specification to the extent specified herein.

RULES AND REGULATIONS

Copies of the Documents, U.S.

U.S. POSTAL SERVICE WTUAL

manual may be obtained from the Superintendant of

Government Printing Office, Washington, ?).C.20402.)

2Source: https://assist.dla.mil -- Downloaded: 2024-08-21T19:29Z

2.2 Other publications. The following documents form a part of this specification to the extent specified herein. The issues of documents which are indicated as DoD adopted shall be the issue listed in the current lloDISS and supplement thereto, if applicable.

NATIONAL MOTOR FREIGHT TRAFFIC ASSOCIATION, INC., AGENT

National Motor Freight Classification

(Application for copies should be addressed to American Trucking Associa-tions, Attn: Traffic Department, 1616 P Street, Nit., Washington, D.C.

20036. )

UNIFORM CLASSIFICATION COMMITTEE, AGENT

Uniform Freight Classification

(Application for copies should be addressed to the Uniform Classification Committee, Room 1106, 222 South Riverside Plaza, Chicago, Illinois 60606~)

3. REQUIREMENTS

3.1 Guide sample. Samples, information to the contractor may appear in the samples, in when furnished, are solely for guidance and (see 6.3). Variation from this specification which case this specification shall govern.

3.2 First article. \fien specified (see 6.2), the contractor shall furnish sample unit(s) for first article inspection and approval (see 4.3)”

3.3 Materials.

3.3.1 Basic material. The basic material for the overcoat shall be

22 ounce wool melton conforming to type 11, class 4 of MIL-C-16290.

3.3.2 Cloth, rayon, lining. The rayon material for lining the overcoat shall conform to class 1 of MIL-C-368 and shall be dyed to match Black 3202.

3.3.3 Collar interlining. The material for the collar interlining shall be cotton, buckram, unbleached or white and shall conform to type I, class 2 of CCC-C-438, except that the test for shrinkage shall be in accordance with method 5580 of FED-STD-191 and the minimum stiffness requirement (inch-pounds) shall be 0.015 in the filling.

3.3.4 Hanger loop. The hanger loop for the overcoat shall be cotton tubular braid conforming to type 111, class 1 of NIL-B-371. The braid shall be dyed black and show a minimum of good fastness to wet-dry cleaning and a Munsell value for crocking not lower than 8.5 when tested as specified in 4.4.1.

M1-O-82250D(NU)

3.3.5 Front pockets. The material for the front pockets shall be cotton corduroy, conforming to type I, class 1 of CCC-C-441.

3.3.5.1 As an alternate, the material for the front pockets shall be a soft filled cotton flannel, having a smooth suede finish on one side. The color shall be natural or gray. The finished material shall conform to the following minimum requirements:

Weight (oz/sq yd) 6.0 Yarns per inch:

Warp 44

Filling 40 Breaking strength (pounds):

Warp 60 Filling 35

The use of sulfur dyes and dyes containing elementary sulfur or sulfur compounds capable of oxidation to sulfuric acid is prohibited. The dyed material shall show a minimum of good fastness to wet-dry cleaning and a Munsell Value for crocking not lower than 8.5 when tested as specified in 4.4.1.

*3.3.6 Inside pocket and reinforcement pieces. The material for the left inside breast pocket, buttonhole reinforcement on the right vent and pocket stays shall be twill cloth conforming to class 1 of ?fIL-C-43718, The shade Shall be natural or black, When a black shade i.s used, the requirements for perspiration and crocking shall not apply.

3.3.7 to type black.

3.3.8 type I, 3.3.9

3.3.9.

Coat front interlinings. The coat front interlinings sha].1conform u

XIV of MIL-C-15065. The basic interlining material shall be dyed

Shoulder and sleeve pads. The shoulder pads shall conform to class 1 and the sleeve pads shall conform to type IV of MIL-P-15064.

1 Woven tape. The tape for staying the overcoat shall be cloth, cotton, preshrunk, conforming to type I, class 1 or 2 of DTJD-T-86. Required widths shall be as follows:

1/2 inch for staying edges of lapels, fronts and bottom of facings 3/4 inch for staying bridle at breakline of lapel 1/4 inch for staying armholes, front neck gorge and pocket welts

*3.3.9.2 Cross-cut tape. The tape for staying the front shoulder, front armhole and neckline of back shall be dyed or undyed. The material for the tape shall conform to class 1 of MIL-C-43718. The tape shall be cut across the width of the cloth in strips 1/2 (f 1/16) inch wide. The raw edges of the tape shall be treated with a synthetic resin to prevent ravening and shall be tested in accordance with 4.4.1.

3.3.10 Thread.

*3,3.1O.1 Cotton thread. The cotton thread for seaming and stitching the overcoat shall be dyed shade Black AA, Cable No. 66043, and shall conform to type I of V-T-276 in the following types and sizes:

Use Type Ticket No. Ply

Seaming and stitching IC2 o 3

Tacking armholes and attaching sleeve head pads IA1 or IA2 30 3

Button sewing:

Hand IA3 or IB3 12, 16 4

Machine IA3 or 1133 20 4

Buttonholes and bartacks IC2 A, B 3

%3.3.10.2 polYe5ter-covered thread The following polyester-covered threads may be utilized as alternates to the above specified cotton threads and, when used, shall conform to MIL-T-43548:

Use Ply Ticket No, Seaming and stitching 2or3 40 or 50

Tacking 2or3 40 Button sewing:

Hand 2or3 16 Machine 2or3 24

Barracking and buttonholes 2or3 30

3.3.10.3 Basting thread. The thread for basting and tacking shall be a good commercial grade cotton, bleached or unbleached. A monofilament synthetic thread may be used for only those basting operations where the thread is required to be removed provided the garment is subsequently given a treatment, by a cleaning agent in which the synthetic thread is soluble. When this thread is used, any residue remaining on the garment after the drycleaning process shall be brushed off or removed.

3.3.10.4 Silk thread. The silk thread shall be dyed 31ack AA, Cable

No. 66043, conforming to V-T-301 in the following types and sizes:

Use Type Class Size designation Ply

Machine stitching and felling I- 0 3

Hand felling 111 3 A, C 2

3.3.10.4.1 The following threads may be utilized as alternates to the sillcthreads specified above for the operations indicated:

a. For machine felling and blind felling - polyester thread conforming to type I, class 1, size A/3 or .iA/2of V-T-285 or a monofilament nylon thread of comparable type and size.

b. For hand felling - nylon thread conforming to type IV, size A/2 or C12 of V-T-295. .

*C . For padding lapels - nylon thread conforming to type T.II,size 00 of V-T-295.

3.3.10.5 Nylon thread. If an automatic machine which sews shank buttons imitating hand sewing is used, the thread shall be nylon waxed monocord, special No. 4, having a breaking strength of 11 pounds and a minimum length per pound of 3,250 yards and shall be tested for these requirements in accordance with test methods outlined in V-T-295.

3.3.10.6 Colorfastness of threads.

The dyed threads shall show color-fastness to wet-dry cleaning and light equal to or better than the standard sample when tested as specified in V-T-276, V-T-285, V-T-295, ~’-T-3Ol,or MIL-T-43548. When no standard sample is available, the dyed threads shall show good colorfastness to wet-dry cleaning and light when tested as specified in V-T-276, V-T-285, V-T-295, V-T-301, or MIL-T-43548.

3.3.11 Gimp. The gimp for reinforcing the buttonholes shall be thread, cotton gimp, buttonhole conforming to type I or II, size No. 8 of ~7-T-280.

The gimp shall be dyed black.

3.3.11.1 Colorfastness. The dyed gimp shall show fastness to wet-dry cleaning equal to or better than the standard sample when tested as specified in V-T-280. When no standard sample is available, the dyed gimp shall show good fastness to wet-dry cleaning when tested as specified in V-T-280.

3.3.12 Buttons.

3.3.12.1 Metal buttons. The four buttons for the right front shall be regular shank; the four buttons for the left front, two for the lapels, and two for the half belt shall be short shank with depressed backs conforming to type I, style 4, class A, 40-line of MIL-B-3461.

3.3.12.2 Plastic buttons. The buttons shall conform to type II, class D, style 20 and 21, 24-line (back vent, sword slit flap) and 45-line (inside anchor button) of V-B-871. The buttons shall be shade Black BT, Cable No.

62001,

3.3.13 Labels

*3.3,13.1 combination label. Each overcoat shall have a combination iden-tification and instruction label conforming to type VI, class 15 of DDD-L-20. The label shall show colorfastness to dry cleaning and bear the following inscription:

ovERcoAT, MAN’S (OFFICER TyPE) FIBER CONTENT: wool (loo%) CONTIUICT NO: DLA 100-00-0-0000 (Example)

NAME OF CONTIUICTOR:

DRY CLEAN 0NL%

3.3.13.2 Size label Each coat shall have a size label conforming to type VI, class 2 of DDD–L-20. The label shall show colorfastness to dry cleaning and bear the following inscription:

SIZE: 38R (Example) STOCK NO: 8405-00-000-0000 (Example)

The length (short, regular, long, or extra long) may be abbreviated as S, R, L, or XL.

3.4 Design. The overcoat shall be double breasted, full length, fully lined, with a convertible collar and a two piece half belt on back fastened with two 40-line Navy eagle buttons; five 40-line Navy eagle buttons shall be on each front. The overcoat shall have a two piece set in sleeve;

through opening lower welt pockets; inside left breast welt pocket; a sword slit on the left side, and a two piece back with a center vent.

3.4.1 FiEure. Figure 1 is furnished for information purposes only.

When inconsistencies exist between the written specification and the figures, the written specification shall govern.

3.5 Patterns. Standard patterns to be used for cutting the contractor’s working patterns will be furnished by the Government (see 6.3). The working patterns shall be identical to the standard patterns and shall not be altered in any way. Unless otherwise specified in Table I, seam allowances shall be as follows:

Joining center back and side seams - 5/8 inch Joining underarm darts, shoulders, armholes, and sleeves - 3/8 inch Joining facings to fronts - 1/8 to 3/16 inch

Joining facings to lining - 3/8 inch Joining sides of lining - 3/4 inch Joining center back and sleeves of lining - 3/8 inch

3.5.1 Pattern parts. The component parts for the overcoat shall be cut from the materials as specified, and in accordance with the following pattern parts:

Material Nomenclature of pattern parts Cut parts

Cloth, Rayon, Lining

Cloth, Melton, Wool Front Back Front facing Topsleeve

Undersleeve Topcollar Topcollar stand Undercollar, front part Undercollar, back part Belt (back) Welt, pocket Facing, pocket Flap, sword slit Facing, sword slit

Front Back Topsleeve Undersleeve Wide inside breast pocket

(facing and piping) Narrow inside breast pocket

(facing and piping) Flap, sword slit Belt (back)

Cloth, Twill Vent piece (buttonhole) reinforcement Inside breast pocket (piping side) Inside breast pocket

Cloth, Corduroy, Cotton Pocket - Top ply or Cloth, Flannel, Cotton Pocket - Bottom ply

Collar, Interlining Undercollar interlining (front part) Undercollar interlining (back part)

Template Lapel shaper Undercollar shaper Undercollar stand marker Sword slit flap marker

NOTE : Patterns are not furnished for shoulder loops (see operation 7).

M1L-O-82250D(NU)

3.6 Construction.

3.6.1 Stitch, seam, and stitching types. Stitch, seam, and stitching types specified in Table I shall conform to FIID-STD-751. Wherever two or more methods for seam or stitch types are given for the same part of the operation, any one of them may be used. Unless otherwise specified, edgestitching shall be 1/2 inch from the edge.

3.6.2 Thread breaks and ends of seams. Ends of all seams and stitchings when not caught in other seams or stitchings shall be backpacked not less than 3/8 inch, unless otherwise specified. The ends of a contin-uous line of stitching shall be overlapped not less than 1/2 inch. Thread breaks shall be secured by stitching back of the break not less than 1/2 inch. Skipped stitches and thread breaks may be repaired by using

301 stitch type.

3.6.3 Stitches per inch. The minimum and maximum number of stitches per inch shall be as specified in Table 1.

3.7 Manufacturing operations requirements. The overcoats shall be manu-factured in accordance with the operation requirements specified in Table I.

The contractor is not required to follow the exact sequence of operations listed provided that the finished overcoats are identical to that produced by following the sequence of operations as listed in Table 1.

3.7.1 Shade and size markin~. The component parts shall be marked or ticketed to insure a uniform shade and size throughout the overcoat. Any method of shade and size marking may be used except:

1. Corrosive metal fastening devices. NO metal device or sew-on type marking shall be used on the rayon lining.

2. Adhesive type tickets which discolor or adhere to the material upon removal of the tickets.

NOTE : The use of ink pad numbering machine, rubber stamp or pencil is allowed, provided the numbering does not show on the outside of the over-coat and wherever possible, is covered by the seam allowance.

3,7.2 All pressing operations referenced in Table I shall be performed by using a heated pressing iron and steam pressing machine.

ii w c %-l u fflalu

IJ)E

boas (-LIM.c v ti u.

Oc !2.0 c1!

-U3 m m 9-I d*

10Source: https://assist.dla.mil -- Downloaded: 2024-08-21T19:29Z t%cm A< u++

‘-l u u o +- ..

u ‘l-++(U3 ‘(film- w ill d miii m r-l o o t--l m o o u m u u

‘u al Uuc t%E

4J:

Ww aJ l-!

ii

D

1’)

“’G’.

JJ

c u ii

C.-J m m m m t-n c 0 0

J-Jm E

AGO

!lJ@& w

MIL-W32250D(NU)

m f-l r-l m o 0 0 c o m d G m

I I

.2 C) o G

.-2 w m rn u G

W w c s u

.5 . 1+ u m w m l’= d

,1 w 40co m .2 u

Uo alu s Ur+ Oal

CL+

!4;

4Jcl o

“c

.22

‘E Q-lo o& a v: g h+

Ss al Uu. c

32U la3c b oh l-l cl.

u u u+ o ‘al u (d

U-1 u-( o i u c o

U4 z ‘u al 4-J m u

J-l 4-I c M iii 1t.

n -0

AJ

w o

H m m o 0 m m o 0 m r-l n m e-l o c w —

~ 5“ moo ccl 0’+ +Jal n

-00 Ciu l-l mm

.,2.5

Uuw

7C m m m r? m o 0 0 0 0 m m m m m o 0 0 0 0 u l-i

A l-l u A 1+ w al G

JJ

.,-1 C/l o 0.

J-1 c o

-0

‘u

2’ m m .5 cw+ w o u on.

Ufu

RI

L1

4-I w o l-l

4J

U2s v G

(d l-l c ml co m

‘u

AE

0!3 Wal

Em 0“0

MC

Wa al u

UI

a n.

dm l!

E -.

v aJ w n iii m

Go o-mo m m m mo 0 mom

In

L1

G EJ

al G-J lQ

$-i m fn’uu~ Ocluo P4aJo

U(U

H.

.C)mi d ii m m m l-l

0 0 Cu o %4 m r-l m o 0 0 u l-l u i+

L(

A.row;

07Y m M Ualo

5$’C Ma+

AJAJ

c o al a m u

U3

(-’3 u

A (n o u c o d

JJ

c v, -1

JJ

u u+ o u .

u o-l s u c!

v-i m

A o u ml 1+ e-l 1+ o ‘u(u s

.2 u

UY

(IJ

F o cm

T1 u

WC

%+ o

U)LI

Oln u1 al m u

1m4J m al g

WI

1+ r+ d -x

141L-O-82250D(NU)

co

-4

5 u dg

Lln&ir(

\o\o Ouov l-l

E

WI

iu Ml c c

Cu

WI

v+

WI

o

G o

E t!-

20Source: https://assist.dla.mil -- Downloaded: 2024-08-21T19:29Z

MIL-O-82250D(nU) r-l P-1 m m o o o 0 mm mm m cm

00 0 0 e u d d.

I ti .5 rd

J= u w o

!4 u m d d o Li

(n

WI

CL

KJ

u ul

(n

,0 u ml-0 al u m

CL

In aJ;

Ual

CQ?

u u co o u c o u-l o d I-1

CL

o u w o u-l o m s A n u c al

EJ

g w c

T( a &l

M al

.5 w o co

F1

A u cd r+ w O’a m G w-l s o u w-l u w da

JJ

A’ -— . 0

4J mm m 00 0

A-+ UY

al c.+ 5 G L-d

‘u o u-l o u l-u o -0 c o al $4 !-i o u w o

.2 u o u

‘%.+ (U5 Ual t-C!3 Wu

-a m u cd

WI

aJ n.

(u u

‘u c (d al u c!

o l-l v cd w u 4-I m al

5;

t-d

.c o-l

SC

o + Uw w o

W c 0 cl+a) m c:

$4$ am

$4 al J-i Is a)

C--J

1+ u-l o

.!s u Y=+

‘u c co a Co aJ

?0.

M m iii o m o

I d:

.I-l a

Rizcii !-l+oal

UE E

tin” d ala.%

DZ4J

XG4J’

P-l@Jfuo

9.s 3 L1l.d al d

1+ al C&

:.4J5 Columo Evm14J d“

23Source: https://assist.dla.mil -- Downloaded: 2024-08-21T19:29Z m m o 0 m m c o

1+ !-i o G m c-

(x c

-1+ t+ ‘u r-l .5 no .2

. Wc u 00

5LY%’

> M3b

Mu a.

U4JOD

C(UC

.+,-c%+

4J.C m o u al

Utdl c-o ~a

Ual Wc aJc

4+ w o rdou >Ulv-1 c cd >:

1!

E-. h

.oW

-xiii

MIL-O-82250D(NIJ)

El ii m c m m c-l cc 0

(-1 mm m

0 00 0

.+ 4 u u

W-III l-l

‘uU LuaJ bw . C’&.Jkwa.l

.Alm M o c UC

MIL-o-82250J)(NU) m m m 1--1

0 0 o c m m C-1 m o 0 0 c

G w

+J$ Ov c

OD

c h-l E M r-l 1+ cc a)” v i+ u O-E Q(U

$.4 P. u m cm c +da us 4J.U d &c o c 0;

,2$ c u u o D.

o mu u-l o 00 .:

CU

.+ a

CCL

aJo Q* o a“ aon 2B0 tdc M + w o

Lo ‘u c aJ al !2

!2

TJ

co ‘5&2 u (U

U+

JJWI

c c al c.

o

.2

“u v &aJ

: s

CLR

w o u

UJ

c 8W d w+w u

. v-l aJR ..2

MIL-O-82250D(N7J)

‘i?

m o m m o 0 m m c c u i+ ml e-l L-4

!3 da

MIL-O-822501)(NU)

c

E o u u o

Q

“u 0.

OJ-IW

EC(!O

WI-!

U-lffl ‘u c-d:

(6CC

~cok

(UC:

da

G l-l m

UI

c a

Y al

5;0 u u (u o u L1 al

+J s u u a c w+ v m w u+ o aJ m m al u al:

aou-1 m a)w o rn

C-4 r-l v c (a

% tQ s m w o

E o u

!j -c

-oU c mo w v G m

O-J bo

.5

Lo> (n

In o u m i u d*

29Source: https://assist.dla.mil -- Downloaded: 2024-08-21T19:29Z e

L) w o

WI

c l-l

E o u-l i+ M!. .

c a

VO

-JC

=.3V

Iwo

C.JS44

v t’ a dU3 u-l o u c oN v al

,cm

*AJ

‘-u G K1 o w u

!-l

‘u 1+ o w u-i o

E u

!2c o

4J

VI .

km

.n -0 ii

P!IL-O-82250D(NU)

r-l o m o g-g aJcQ u ffls s w o c m o m o r-) c m o m o l-l o m o m mu+ -r’iTJo PI-I u s u n+

LJ

aJcn m c a!

s v

.5 v

&o aJ us Cu a!$ u u

!-l

Mu KlaJ I+U Ad Oa vu r- N m N ii

?7 m m o 0 mm cc m m o c

+’ u !-+ d d o m

> fll

E (n

!J 4-J c al u

a) !-l al .lJ G al u

;m G (u c u ;!

x o L4

L)+ l-l Ld 2’:

on.Li (a o u f+ o o al u

J=

JJ

4J d o u

CL

o u

-cd Ual

Li La 44 ai o

-c “Lo i% o uu-l ow o w o‘a al

E i2 u cd e

$4

U) n F4 m N

(T ii n n

A

4 + 1+ -d + .!+ U3 m 0 u w u m u o 0 c

I!

d l-l w

-c u-l o u+ o al

U-J da E 8-

.’2 aJzl (uO iii

34Source: https://assist.dla.mil -- Downloaded: 2024-08-21T19:29Z

MIL-O-822500(NU)

m mm c Oc

L4al M

OG

o a 0.

4JaJ‘%Cl)al em”:

-c(dal+

1+ u+ o m r-) o

CO(--)F7

coo u i?

!-laJ Oc w-i

V+ u

CU

u-l

+J (do al hi w Id al E z u

.5 1+ al Q 1-d n m

1+ o uw u?

w o

1+ w l-l

0 d 1+ in

‘cl al G u ‘m f+ OJ .-i

A

‘Q tlc c .ri o w

4J u u-( o u u Id aJ g l-i

.X:

UC

(u a-l

%’ cd c

C-J \s du

J-1 (u

JJ

u l-i al o d !-l aJ u c v+

‘-d

.2’ m u u “u m i ai

U4 C@“i-l

36Source: https://assist.dla.mil -- Downloaded: 2024-08-21T19:29Z i m m m

0 0 u l-+ d l-l

IQ

WI

w.

a co

M u Lo Q

(u u

N m m m s

37Source: https://assist.dla.mil -- Downloaded: 2024-08-21T19:29Z ii m o m m o 0 m o q d l% (l m m Cn m t+ k

CA

C/7

W4 o a.”

CJ

cd w o

JJ

(n.

u m c u

. . (J + M4J4J l=(w-lul Zcnm

O:w

.n.aJo -031+U v a o r-l o c-l o m o

UJ

alI

.+ 1+

M@J lufl ml c as

M u-l

-0 G t-d

TJ

m n d.

Orn .5 m

4-!

d al

01” cm

h) J_l fiz * Oobo

(n u c rdl ,,7,-- .,+ al In cd c m u al al

!-l m s u a u

CUM

al m r-l c% mmE \\ E Oco mmu

JJ

cd a.”0 u ~ .c u m w u

m) c

Y-+ ‘u ‘a d m l-i

‘d w m m o a ‘g d .

wE’11+

(UO

al 4J>d

GJaJEC oaJuJluaJ Uduws

LO%+ (JJ>

l-l cd d w

!2

Y-I -c -u cc 3‘4

CQ

E!

tJ a

/. n o

Q

1# u cd u4$$

4-I (u c ?440 al aJoJJ > al rlue ~ CnA(d

&al (e co u (d 42

CJ

d

1. J-Jw u+ o u-l o

?5

Ig J-J

A

. B m -1

Ca aii

41Source: https://assist.dla.mil -- Downloaded: 2024-08-21T19:29Z

0 0 0 c d 4 -f 1+ d

CA CA N a! a)

I w o w o m m o v

IQ

w c (u

!3

42Source: https://assist.dla.mil -- Downloaded: 2024-08-21T19:29Z

#4 m-

N:N.

Nurlx 1$410

$-l fcio(d CN.ol-lu o .Q u g u c:9

.F1 l-l a

WY

al

.c m m r= n:

!+s -v al .2 c Ocot

\,4 I U-4 nt-1 w \aJ

AS

+I” -w o m \ll I+&o l-u PJa.1

.2 u u -.4J

---- M;.

-D cc \4-1 I-io(d+ w

J-1 w al

(duo a.c m m% i

44Source: https://assist.dla.mil -- Downloaded: 2024-08-21T19:29Z t

M1L-O-82250D(NU)

cc m

.iJFlu 3.2.5 i-( al d u

4J a) d (0 w G o ml

$-l m

GO

t-d-

J-id ad Q(U u ii iii

(n w caJ c

4J L(

(n u G o u r-l d

.i2 (n aJ u ‘3 o aJ.

cm 2:

CM

Oal

:0 l-i M l-trd u!+ o fiu Lr aw

46Source: https://assist.dla.mil -- Downloaded: 2024-08-21T19:29Z a)2 Fl?.cu

AK

c2 .$I ‘E3

LO(UJJ

I-lalal

CI)U)4

Lo

2’ u

L1 o aJ al

“w v-( $

&i-G (u c o U-J n ‘u-d Uml

1!

LILU

G o C-i n

,50 U4J am

u. M c

Lo c o u u w!+ (d 2

4J

E o L4 w u&

CO;

!.4U)o

-U C9cw -00

L n a3 t-l ii

MIL-O-82250J)(NU)

n w al c o

(n c o

.3

N u

Wl$-+’u

WC

I

.+JE

u W(J3 G a)al o elk 5 c:

‘u c (d w c

MIL-O-82250D(WJ)

J

I i

“1

I t al u c!

d

M1L-O-82250D(NU)

NOTE : Refer to Figure 1 for A, B, C, and D measurements.

(A) Chest - Twice the measurement taken across width of the overcoat at the base of armhole with overcoat fully buttoned, laid flat, and smoothed .-

Out.

(B) Center Back Length - Measurement shall be taken from undercollar seam at center back to bottom edge of overcoat.

(C) Sleeve Inseam Length - Measurement shall be taken from the base of arm-hole along inseam to bottom folded edge of sleeve.

(D) Sweep - Measurement shall be taken at the bottom of the overcoat in a straight line from front edge to front edge with the vent fully closed,

3.9 Workmanship. The finished overcoats shall conform to the quality established by this specification. As a final step in the contractor’s pro-duction control plan, before formation of a lot, each overcoat shall be buttoned on a model form and examined for selected defects. An overcoat containing a selected defect shall not be included in the end item lot.

Selected defects are those defects listed in Table III of MIL-STD-1391. The occurrence of defects shall not exceed the applicable point value or selected defect limit.

4. QUALITY ASSURANCE PROVISIONS

4.1 Responsibility for inspection. Unless otherwise specified in the contract, the contractor is responsible for the performance of all inspection requirements as specified herein, Except as otherwise specified in the -contract, the contractor may use his own or any other facilities suitable for the performance of the inspection requirements specified herein, unless disapproved by the Government. The Government reserves the right to perform any of the inspections set forth in the specification where such inspections are deemed necessary to assure supplies and services conform to the prescrib-ed requirements.

4.1.1 Certificate of compliance. Where certificates of compliance are submitted, the Government reserves the right to check test such items to determine the validity of the certification.

4.2 Classification of inspections. The inspection requirements specified herein are classified as follows:

1, First article inspection (see 4,3).

2. Quality conformance inspection (see 4.4).

4.3 First article inspection. The first article submitted in accordance with 3.2, shall be inspected as specified for compliance with design, con-struction, workmanship and dimensional requirements.

4.4 Quality conformance inspection. Inspection shall be performed in accordance with MIL-STD-1391.

4.4.1 Component and material inspection. In accordance with 4.1 above, components and materials shall be inspected and tested in accordance with the requirements of referenced specifications, drawings, and standards unless otherwise excluded, amended, modified or qualified in this speci-fication or applicable purchase document. In addition, a certificate of compliance shall be furnished for the colorfastness requirements of 3.3.4, the cotton flannel requirements of 3.3.S.1, when applicable, and the resin treatment requirements of 3.3.9.2.

4.4.2 End item examination. Sampling and examination of the end item shall be performed in accordance with the provisions of MIL-STD-1391.

4.4.3 Packaging examination The examination for compliance with packaging requirements shall be as specified in MIL-STD-1391.

5. PACKAGING

5,1 Preservation - Packaging. Packaging shall be level A or C as specified

(see 6.2).

5.1.1 Level A. Each overcoat shall be laid flat back down and folded as follows: 1. Fold in thirds lengthwise by bringing the left front over the right front, with the edge of the left front near the right side seam.

2. Fold the sleeves one on top of the other across the chest. 3. Fold the top of garment down approximately 1/3 the length of the overcoat. 4. Bring bottom of garment up approximately 1/3 the length of the overcoat so that the folded garment measures approximately 14-1/2 inches by 23 inches. Each overcoat shall be packaged in a fiberboard box con-forming to style OPF or RSC, type CF variety SW, class domestic, grade 125 of P?P-B-636. The outside dimensions of each fiberboard box shall be 23-1/4 inches in length, 14-3/4 inches in width, and 3-11/16 inches in depth. The box shall be secured by taping all seams with a minimum 3 inch wide gummed paper tape conforming to type 111, grade R of PPP-T-45.

5.1.2 Level C. Overcoats shall be packaged to afford adequate protection against physical damage during shipment from the supply source to the first receiving activity. The package and the quantity per package shall be the same as that normally used by the contractor for retail distribution.

5.2 Packing. Packing shall be level A, B, or C as specified (see 6.2).

5.2.1 Level A. Four overcoats of one size and length only, packaged as specified in 5.1.1, shall be packed in a fiberboard shipping container assembled, closed and reinforced conforming to type CF, class weather-resistant, variety DW, grade V15C, size 3 of MIL-B-17757. Level A packages shall be packed flat, four in depth within the shipping container. Toward the end of the contract, or when there are less than the required amount per container of the same size, mixed sizes may be packed within the same shipping container.

MIL-O-82250D(NJ)

5.2.2 Level B, Four overcoats of one size and length only, packaged as specifed in 5.1,1, shall be paclced in a fiberboard shipping container assembled and closed conforming to type CF, class domestic, variety IN, grade 275, size 3 of MIL-B-17757. Level A packages shall be packed flat four in -depth within the shipping container. Toward the end of the contract or order, or when there are less than the required amount per container of the same size, mixed sizes may be packed within the same shipping container.

5.2.3. Level C, Overcoats, packaged as specified in 5.1, shall be packed in a manner to insure carrier acceptance and safe delivery at destination at the lowest transportation rate for such supplies. The quantity per shipping container shall be the same as that normally used by the contractor for retail distribution. Containers shall comply with the U.S. Postal Service Manual, Uniform Freight Classification Rules or National Motor Freight Classification Rules, as applicable.

5.3 Marking. In addition to any special marking required by the contract or order, interior packages and shipping containers shall be marked in accordance with MIL-STD-129.

5.3.1 Labels, mixed sizes. Each shipping container packed with mixed sizes shall have securely attached to the end and side, directly under the printing or stenciling, a white paper label 5 by 4 inches with the words “MIXED SIZES” plainly printed or stamped thereon and under these words shall be legibly printed or stamped the correct quantity and sizes contained herein.

6. NOTES

6.1 Intended use. The overcoats are intended to be worn by authorized male Navy personnel.

6.2 Ordering data. Procurement documents shall specify the following:

a. Title, number and date of this specification.

b. Sizes and lengths required (see 1.2).

*d, When a first article inspection is required, the item will be tested

6.3 Samples and patterns. For access to samples and patterns, address the procuring activity issuing the invitation for bids.

*6,4 changes from previous issue The margins of this specification are marked with an asterisk to indicate where changes (additions, modifications, corrections, deletions) from the previous issue were made. This was done as a convenience only and the Government assumes no liaiblity whatsoever for any inaccuracies in these notations. Bidders and contractors are cautioned to evaluate the requirements of this document based on the entire content ir-respective of the marginal notations and relationship to the last previous issue.

Custodian: Preparing activity:

Navy - NU Navy - NU

Review Activity: Project No. 8405-N902

DLA - CT

*u.5.GOVERNMENTPRINTING OFFICE: 1984-705-0401A0826

I

MIL-O-82250n(N1J) o

LL-----.

I

FOLD

OFFICIAL BUSINESS

PENALTY FOR PRIVATE USE $300

POSTAGE AND FEES PAID

o

DEPARTMENT OF THE NAVY

DoD-316

US.MAIL

Officer in Charge Navy Clothing and Textile Research Facility 21 Strathmore Road Natick, MA 01760

STANDARDIZATION DOCUMENT IMPROVEMENT PROPOSAL I ~llL.o_82250~

INSTRUCTIONS: Thisformk provided to solicit beneficial comments which may improve this document and enhance its use. DoD contractors, government activities, manufacture, vendors, or other prospective users of the document are invited to submit comments to the government. Foldon lines on reverse side, staple in corner, and send to preparing activity. Attach any pertinent data which may be of use in improving this document. If thereare additional papers, attach to form and place both in an envelope addressed to preparing activity. A response will be provided to the submitter, when name and address is provided, within 30 days indicating that the 1426 was received and when any appropriate action on it will be completed.

NOTE: Thisformshall not be used to submit requesb for waivers, deviations or clarification of specification requirements on current contrack Comments submitted on this form do not constitute or imply authorization to waive any portion of the referenced document(s) or to amend contractual requirements.

IOCUMENT IDENTIFIER (Number) AND TITLE

41L-O-82250D Overcoat, Man’ s (Officer’s Type)

IAME OF ORGANIZATION AND ADDRESS OF SUBMITTER

3 VENDOR ❑ USEFI ❑ MANUFACTURER

❑ HAS ANY PART OF THE DOCUMENT CREATED PROBLEMS OR REQUIRED INTERPRETATION IN PROCUREMENT

‘SE? ❑ IS ANY PART OF IT TOO RIGID, RESTRICTIVE, LOOSE OR AMBIGUOUS7 PLEASE EXPLAIN BELOW.

A, GIVE PARAGRAPH NUMSER AND WORDING

B. RECOMMEND ED WORDING CHANGE

C. REASON FOR RECOMMEND) ED CHANGE(S)

JBMI TTED BY (Printed or typedname and address — Optional) TELEPHONE NO.

DATE

DD FORM

1OCT 76

1426 Reptsces edition of I Jan ’72 which may be tried. S/N O1O2-LF-OO1-426O v