A 02 - SOW - TSU Road Grader Tires Final Version.docx

STATEMENT OF WORK

FOR

(TSU Road Grader)

1. Vendor shall provide a complete set of road grader tires as well at the parts, labor, and disposal involved in dismounting the old tires from each rim and mounting the new ones on each rim. A ‘complete set’ is to include six (6) wheels rolling and the seventh (7th) would be a spare along with any required miscellaneous parts for the proper utilization and care of each tire.

2. Tires shall meet the following requirements:

1) Quantity: 7

2) Size: 1400R24

3) “Snow Plus” designation

4) Known Manufacturers to have met this requirement in the past: Michelin or similar

5) Tires as well as any parts, tools, or equipment needed to install the tires will be procured by the vendor.

3. Vendor Service Center:

1) Must be located within 45-mile (driving) radius of Camp Ripley, Little Falls MN 56345

2) Must be certified to install the quoted road grader tires.

3) Must be complete with installation of all tires within xx days from when Government personnel drop off the Road Grader tires.

4. Delivery:

1) Government Personnel will dismount current tires from the Road Grader located at Camp Ripley, Little Falls MN 56345. Once dismounted, Government Personnel will deliver dismounted tires to the vendors service center within XX days of contract award.

2) Once Mounting of new tires onto rims is complete, Government personnel will pick up completed assemblies and transport them back to Camp Ripley for reassembly by Government Personnel.

Informational Exhibit Number 1:

1. Current Road Grader Tire Size: 14.00

2. Rim Size: 24in