98369c.pdf
PDF 330 KB Posted
- Attached to
- Filter First Upgrade
- Solicitation number
- RFP ADR 260000001756 2
- Issued by
- Kent County, Michigan
About this file
This is a technical installation manual for the MLP100 Mounting Plate System designed by Elkay and Halsey Taylor for use with multiple water cooler models (EMA, EZ, HAC, HTVZ, HVR, and VRC). The document provides detailed instructions for proper installation and compliance with plumbing, electrical, and applicable building codes. The mounting plate system consists of nine component parts, including upper and lower mounting plates, support column assembly, U-bolts, threaded rods, hex nuts, and flat washers in specified quantities. The manual includes precise dimensional specifications for installation behind finished walls, with mounting hole locations and height requirements for both standard and ADA-compliant children's cooler installations. Installation heights are standardized at 44 1/8 inches from the finished floor, with provisions to reduce height by 3 inches for ADA children's coolers. The document emphasizes that all service work must be performed by authorized service personnel and recommends contacting Elkay's technical service at 1.800.476.4106 for assistance.
The manual notes that mounting plates are installed behind finished walls and that hanger brackets are furnished separately with the cooler units. Specific installation diagrams are provided for different cooler models (EMA, HAC, VRC, HVR versus EZ and HTVZ models), with detailed callouts indicating electrical, waste, and water supply locations referenced in unit-specific installation manuals. The document advises that U-bolts and threaded rods may require trimming after installation. No pricing, funding, or contractual terms are included in this technical specification document.
View the file
Other files
Show all 16
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
PAGE 1 98369C (Rev. B - 08/16)
MLP100
Elkay - www.elkay.com Halsey Taylor - www.halseytaylor.com
Mounting Plate Instructions Model MLP100
To assure you install this model easily and correctly, PLEASE READ THESE
SIMPLE INSTRUCTIONS BEFORE STARTING THE INSTALLATION. CHECK
YOUR INSTALLATION FOR COMPLIANCE WITH PLUMBING, ELECTRICAL
AND OTHER APPLICABLE CODES. After installation, keep these instructions for future reference.
IMPORTANT
ALL SERVICE TO BE PERFORMED BY AN AUTHORIZED SERVICE PERSON
Installer
PAGE 298369C (Rev. B - 08/16)
Elkay - www.elkay.com Halsey Taylor - www.halseytaylor.com
2, 6, 9
This Mounting Plate System is designed for use with the following models:
EMA, EZ, HAC, HTVZ, HVR, and VRC.
Parts List Refer to the illustration to make sure you receive the required mounting plate parts. If any parts are miss-ing contact your local distributor or call 1.800.476.4106.
PART NO. DESCRIPTION
110041643890 110175443890
28779C 28780C 28781C 75707C 75711C 75544C 75545C
Hex Nut 1/4-20 Hex Nut 3/8-16 Upper Mounting Plate Lower Mounting Plate Support Column Assy.
U-Bolt 3/8-16 UNC 2A Threaded Rod 1/4-20 x 6 In.
Flat Washer 1/4 In.
Flat Washer 3/8 In.
ITEM NO. QTY.
PAGE 3 98369C (Rev. B - 08/16)
Elkay - www.elkay.com Halsey Taylor - www.halseytaylor.com
HANGER BRACKET
FURNISHED WITH
COOLER. SEE COOLER
ROUGH-IN FOR CORRECT
BRACKET HEIGHT.
MOUNTING PLATES
INSTALLED BEHIND
FINISHED WALL
44 1/8" 1121mm
SEE DETAIL A
FINISHED FLOOR
FINISHED WALL
**4 3/4" MAX.
121mm
27" 686mm*
12 3/8" 314mm
1" 25mm
29" 737mm
5/8" 16mm
2 3/4" 70mm
EMA, HAC,
VRC, HVR
MTG. HOLES
EMA, HAC,
VRC, HVR
MTG. HOLES
18" 457mm
EMA, HAC, HVR, and VRC Models - For electrical, waste, and water supply locations please refer to the Installation/ Owners Manual for the specific unit.
VRC SHOWN
* ADA REQUIREMENT - REDUCE HEIGHT BY 3” FOR INSTALLATION OF CHILDRENS ADA COOLER.
** WITH STANDARD STUD LENGTH OF 6 INCHES.
NOTE - AFTER INSTALLATION, U-BOLTS AND THREADED RODS MAY NEED TO BE TRIMMED.
5/8" 16mm
3 1/4" 83mm
4 1/2" 114mm
1/2" 13mm
2" 51mm
2 1/2" 64mm
.50 x .75 OBROUND (4)
DETAIL A
MTG. HOLES FOR
THREADED RODS
MTG. HOLES FOR
THREADED RODS
PAGE 498369C (Rev. B - 08/16)
Elkay - www.elkay.com Halsey Taylor - www.halseytaylor.com
18" 457mm
4 3/4" MAX.
121mm
FINISHED WALL
FINISHED FLOOR
MOUNTING PLATES
INSTALLED BEHIND
FINISHED WALL
HANGER BRACKET
FURNISHED WITH
COOLER. SEE COOLER
ROUGH-IN FOR CORRECT
BRACKET HEIGHT.
SEE DETAIL A
44 1/8" 1121mm
27" 686mm*
12 15/16" 329mm
1" 25mm
27 13/16" 706mm
5/8" 16mm
2 3/4" 70mm
MTG.
HOLES
MTG.
HOLES
EZ & HTVZ Model - For electrical, waste, and water supply locations please refer to the Installation/Owners Manual for the specific unit.
* ADA REQUIREMENT - REDUCE HEIGHT BY 3” FOR INSTALLATION OF CHILDRENS ADA COOLER.
** WITH STANDARD STUD LENGTH OF 6 INCHES.
NOTE - AFTER INSTALLATION, U-BOLTS AND THREADED RODS MAY NEED TO BE TRIMMED.
DETAIL A
5/8" 16mm
3 1/4" 83mm
4 1/2" 114mm
1/2" 13mm
2" 51mm
2 1/2" 64mm
.50 x .75 OBROUND (4)
MTG. HOLES FOR
THREADED RODS
MTG. HOLES FOR
THREADED RODS
For Technical Service, please contact us at 1.800.476.4106
File details come from the government source that posted it. Updated .