9281170.pdf

C

A

D

D

C

B

A

CONTRACT NUMBER

DAISIZE

SCALE UNIT WT.

DESIGN ACTIVITY

CONTRACTOR

DRAWN BY DATE(YEAR-MO-DA)

CHECKER ENGINEER

ENGINEER QUALITY ENGINEER

DRAWING APPROVAL

DESIGN APPROVAL

B

MODELED BYMATL ENGR

SHEET

TOLERANCE ON ANGLES �#� �$�

2 PLACE DECIMALS �#�

3 PLACE DECIMALS �#�

FORMAT: C_TACOM_ENG_1_0

DRAWING SIZE C

DWG NO.

1 OF 10.0001.000

928117019203C

PACKING AND MARKING

FOR CHARGE, DEMOLITION:

SHAPED, 15LB, M2A4

U.S. ARMY MUNITIONS COMMAND

PICATINNY ARSENAL, DOVER, NEW JERSEY 07801

2024-08-26S. PATEL

2024-08-26O. FERMIN

O. FERMINJ. GRANUZZO

1973-07-13T. TRAN

T. TRAN

THIRD ANGLE PROJECTION

UNLESS OTHERWISE SPECIFIED

DIMENSIONS ARE IN INCHES

DO NOT SCALE DRAWING

APPLICATION

USED ONNEXT ASSY

M2A413025692

PMIC

MECHANICAL

PROPERTIES

YP

TS

EL2

RA

BH

RH

REVISIONS

APPROVEDDATE(YEAR-MO-DA)DESCRIPTIONDRAW REV

BAC2000-06-27NOR R0B2013 / 2000-05-10C

FET2006-10-04NOR R06B2001 / 2006-08-07D

GJC2009-04-21NOR R09B2001 / 2009-03-30E

GJC2012-01-06NOR R11B2008 / 2011-12-21F

RLV2024-10-09

REDRAWN WITH CHANGES

NOR R24B2007 / 2024-08-26

G

PART NO. 9281170

THIS DRAWING WAS GENERATED FROM A SOLID MODEL

AND IS CAD MAINTAINED. CHANGES SHALL BE

INCORPORATED BY THE DESIGN ACTIVITY.

NSN

CURRENT DESIGN ACTIVITY CAGE CODE 19200

US ARMY

COMBAT CAPABILITIES DEVELOPMENT COMMAND ARMAMENTS CENTER

PICATINNY ARSENAL, NEW JERSEY 07806-5000

MARKING INSTRUCTIONS, BOX, WOOD

M1 - THE BOX SHALL BE MARKED IN ACCORDANCE WITH DWG 8796522.

M2 - THE PROPER SHIPPING NAME AND IDENTIFICATION NUMBER

SHALL BE CHARGES, DEMOLITION UN 0048

M3 - THE DESCRIPTIVE NOMENCLATURE SHALL BE; CHARGE,

DEMOLITION: SHAPED, 15LB. M2A4.

M4 - THE NSN AND DODIC SHALL BE: 1375-01-023-7994-M420.

M5 - THE UN POP MARKING (SEE NOTE 5) SHALL BE:

THE LETTERS "u" AND "n" SHALL BE IN LOWER CASE AND ENCLOSED IN

A CIRCLE. PRIOR TO SHIPMENT, THE MANUFACTURER SHALL MAKE SURE

THE CONTAINER HAS BEEN TESTED BY A GOVERNMENT APPROVED POP

TEST LABORATORY FOR COMPLIANCE WITH TITLE 49 CODE OF THE

FEDERAL REGULATIONS. AT * ENTER THE LAST TWO DIGITS OF THE

YEAR PACKED. THE POP TESTED BOX WEIGHT MUST BE GREATER THAN OR

EQUAL TO THE WEIGHT OF THE PACKED OUT BOXES IAW 49 CFR.

NOTES:

2 - MATERIAL: FILLER, SHEET FORM MIL-PRF-50449.

3 - QUANTITY: AS REQUIRED.

4 - MATERIAL: TAPE, GUMMED, PAPER, TYPE II, GRADE B,

ASTM D5749.

5 - MATERIAL: INK, STENCIL, BLACK 37038, TYPE II, III,

OR IV, SPEC A-A-208.

6 - FOR REQUIRED MARKING SEE APPLICABLE PART DRAWING.

7 - MATERIAL: BAG, RE-SEALABLE, POLYETHYLENE, CLEAR,

2 MIL MIN THICK, PRESS SEAL CLOSURE, COMMERCIAL.

PACKING INSTRUCTION

P1 - ALL MATERIAL SHALL BE DRY AT THE TIME

OF PACKING. PAPER PRODUCT SHOULD NOT

HAVE MORE THAN 9% MOISTURE CONTENT.

P2 - SECURE BOTTOM FLAPS OF FIBERBOARD BOX

WITH TAPE, APPLIED OVER FULL LENGTH OF

CENTER AND END SEAMS WITH MINIMUM 2 INCH

EXTENSION ON TO END PANELS AND AROUND

CORNERS OF THE BOX.

P3 - INSERT BASE RING SUPPORT - 9281171-3 (REF) ON THE BOTTOM

OF THE CHARGE. INSERT THE CHARGE INTO THE FIBERBOARD BOX.

P4 - PLACE A STAND SEPARATOR 9281171-2 (REF) OVER THE NOSE OF THE CHARGE.

P5 - INSERT THE CHARGE STAND OVER THE CHARGE AND SEPARATOR.

P6 - PLACE A TOP RING SUPPORT 9281171-1 (REF) ON TOP OF THE CHARGE WITH THE

NOSE OF THE CHARGE SECURELY INSERTED INTO THE CENTER CAVITY OF THE SUPPORT.

P7 - PACK 2 ADAPTER, PRIMING M1A5 13021902 INTO RE-SEALABLE BAG, REMOVE

EXCESS AIR, AND PRESS SEAL. PLACE BAGGED ADAPTERS IN HOLE CUT THRU TOP FILLER.

P8 - CLOSE THE FIBERBOARD BOX FLAPS AND SECURE THE FLAPS AS INSTRUCTED IN P2.

FORCE MAY NEED TO BE APPLIED TO COMPRESS POLYETHYLENE COMPONENTS TO

ENSURE PROPER CLOSING.

P9 - BLUNT ALL CORNERS OF THE BOX AND INSERT THE BOX INTO A BARRIER BAG.

P10 - EXHAUST ALL EXCESS AIR FROM THE BARRIER BAG AND CLOSE THE BAG OPENING BY MEANS

OF HEAT SEALING. SEAL SHALL MEET HEAT SEAL TEST OF MIL-STD-2073.

P11 - PACK FOUR (4) CHARGES PACKAGED AS DESCRIBED (P1 THROUGH P10) INTO A WOODEN BOX.

P12 - ADD FILLER AT SIDES, ENDS AND ON TOP OF THE BOX CONTENT. ADD ADDITIONAL

FILLERS AS REQUIRED FOR A TIGHT PACK.

P13 - CLOSE THE BOX AND APPLY STRAPPING AND METALLIC SEAL AS SPECIFIED IN THE

INSTRUCTIONS CONTAINED IN THE APPENDIX OF THE BOX SPECIFICATION.

BAG, BARRIER - 9281173

NOTE 6

BOX, FIBERBOARD - 9281172

NOTE 6

BOX, WOOD - 9281174

COMPONENTS, POLYETHYLENE - 9281171

FILLER, END - 9281170-2

18. X 13.

NOTES 2, 3

FILLER, SIDE - 9281170-1

18. X 13.

NOTES 2, 3

4C1/Y*/S/**

USA/DOD/AYD

FILLER, TOP - 9281170-3

18. X 18.

NOTES 2, 3

MARKING - 8796522

NOTE 6

TAPE - 9281170-4

2 INCH WIDTH

NOTE 4

BAG, RE-SEALABLE -9281170-5

3 (OPEN FACE) MIN X 4 MIN

NOTE 7

REFERENCE DATA:

COAI DWG: 13025692

FIBERBOARD BOX PACK INCLUDES:

1 - CHARGE, DEMOLITION: SHAPED, 15LB. M2A4: 8861565-1

1 - SLEEVE, STAND OFF: 8861567-1

2 - ADAPTER, PRIMING M1A5: 13021902

DISTRIBUTION STATEMENT A

APPROVED FOR PUBLIC RELEASE;

DISTRIBUTION IS UNLIMITED.

u n

Sheet 1