GWCC_Childcare_Replace_Sinks_and_Cabinetry_SOW.pics.docx

DOCX document 2 MB Posted

Attached to
GWCC Childcare Replace Sinks and Cabinetry
Solicitation number
893117
Issued by

About this file

Statement of Work along with pictures of the George Washington Carver Center childcare sinks and cabinetry

View the file

On GovTribe

Work with this file

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file

Text version

Project: GWCC Childcare Center Statement of Work

The contractor shall provide all personnel, equipment, tools, materials, and supervision necessary to repair/replace/service cabinets. Remove all the existing FRP wall panels throughout the Childcare Center. The base cabinets, overhead cabinets and countertops are to be removed and replaced with new. Sinks in the cabinets are to be removed and replaced with new. Prep, patch and paint the Childcare Center to match what is existing. Clean area upon completion of work.

· Remove and replace base cabinet s, countertops and wall cabinets with new.

· Remove and replace existing sinks with new.

· Provide new piping and fittings associated with reconnecting the sinks.

· Remove all existing g FRP wall panels from the walls.

· Prep, patch and paint walls to match existing.

· Put system back in service and test for proper operation.

· All work shall be conducted during weekend hours.

· The contract will be a firm fixed price.

· Materials should be ordered 60 days after award and delivered to site.

· Kick off meetings will be held 10 days after award.

· After 10 days of project award the description of milestones, schedules, names of project team, subcontractor s, etc. should be submitted along with the project plan.

· Weekly reports summarizing the progress of obstacles should be submitted 15 days after award, every seven (7) days afterward.

· System Commissioning will be performed at each and will have a full sign-off 45 days after award.

· Invoice procedures -vendor must submit all their invoices through IPP - and courtesy copy {via email) to COR. “The "Submit Invoice-to" address for USDA orders is the Department of Treasury's Invoice Processing Platform (IPP). The contractor must follow the instructions on how to register and submit invoices via IPP as prescribed in the previous communications from USDA and Treasury. All invoices are to be submit ted via the electronic c Invoice Processing Platform. This is a mandatory y requirement initiated by the U.S. Department of Treasury and you can find more information at this website http s:/ / www.ipp.gov/index.htm. Please make sure that your company has registered at https://www.ipp.gov/vendors/enrollment-vendors.htm to establish your account.

· The contractor shall repair or replace any damage to the existing conditions caused by his actions. Repair and replacement of damaged conditions shall match the integrity of the adjacent area.

· Contractor shall ensure final project meets current Guidelines, FAR regulations and current appropriate codes, standards, and regulations relative the United States Department of Agriculture. Contractor shall immediately notify USDA safety personnel of all accidents/incidents involving employee use of and/ or damage/injury to facilities, equipment, or personnel.

· Contractor shall adhere to all OSHA standards.

· Contractor shall comply with all federal, state, and local environmental laws, and USDA policies and regulations to include but not limited to Resource Conservation and Recovery Act (RCRA), Safe Water Drinking Act (SWDA), the Clean Air Act (CAA), and Federal Facilities Compliance Act (FFCA).

· The use, handling, storage, and disposal of all toxic, hazardous, special or radiological wastes/materials shall be IAW all local, state, federal, and USDA environmental regulations and procedures.

Childcare Center

Shelf image1.jpeg image2.jpeg image3.jpeg image4.jpeg image5.jpeg image6.jpeg image7.jpeg image8.jpeg

File details come from the government source that posted it.