Tech_Data_Leather_Gloves.doc

Gloves, Leather

PGC’s and/or NSNs

PGC03999

Size NSN

X-Small 8415-01-3940208

Small 8415-01-3940209

Medium 8415-01-3940210

Large 8415-01-3940215

X-Large 8415-01-3973937

ITEM DESCRIPTION

GLOVES, HEAVY DUTY LEATHER SHALL BE MADE IN ACCORDANCE WITH SERVICE SPECIFICATION 6170-5D DATED MARCH 27, 2008

Unless otherwise indicated, copies of federal and military specifications and standards are available online at http://assist.daps.dla.mil/quicksearch/ or in hard copy from the Standardization Documents Order Desk, Bldg. 4D, 700 Robbins Ave., Philadelphia, PA 19111-5094.

NSN 8415-01-394-0208

NFES 1293

GLOVES, HEAVY DUTY LEATHER, X-SMALL: Shall be extra small, heavy-duty leather gloves in accordance with Forest Service Specification 6170-5D dated March 27, 2008, with the following characteristics:

Size - Extra Small

NSN 8415-01-394-0209

NFES 1294

GLOVES, HEAVY DUTY LEATHER, SMALL: Shall be heavy duty leather gloves in accordance with Forest Service Specification 6170-5D dated March 27, 2008, with the following characteristics:

Size - Small

NSN 8415-01-394-0210

NFES 1295

GLOVES, HEAVY DUTY LEATHER, MEDIUM: Shall be heavy-duty leather gloves in accordance with Forest Service Specification 6170-5D dated March 27, 2008, with the following characteristics:

Size - Medium

NSN 8415-01-394-0215

NFES 1296

GLOVES, HEAVY DUTY LEATHER, LARGE: Shall be in heavy-duty leather gloves accordance with Forest Service Specification 6170-5D dated March 27, 2008, with the following characteristics:

Size - Large

NSN 8415-01-397-3937

NFES 1297

GLOVES, HEAVY DUTY LEATHER, X-LARGE: Shall be extra-large, heavy duty leather gloves in accordance with Forest Service Specification 6170-5D dated March 27, 2008, with the following characteristics:

Size – Extra Large

First article sample(s) are required.

Exception to Forest Service Specification 6170-5D, delete paragraph “3.2.4 Binding. The binding shall be 1-1/4 inch width bias-cut cotton conforming to type I, class 2, of A-A-52067. The color shall be dark brown.” and replace with "3.2.4 Binding. The binding shall be 1-1/4 inch width bias-cut cotton conforming to A-A-52067. The color shall be dark brown."

INFORMATION FOR PROSPECTIVE BIDDERS:

As an exception to specific statements contained within the referenced Forest Service specification, the following items shall be furnished only to successful bidders upon contract award: color shade samples, full-size drawings and full-size patterns. For bidding purposes, 11" X 17" drawings will be furnished upon request. They will contain sufficient information regarding size, shape, and quantity of material for bidding purposes. Note it is the bidder's responsibility to determine yield and waste from the provided 11" X 17" drawings and no further direction or clarification will be provided by the government.

Interim Changes

(T1446)

A-A-52067 BINDING, TEXTILE, COTTON,

. BIAS-CUT, DATED 3/13/90

(T2470)

THREAD, ARAMID, SPUN STAPLE, A-A-55217B, DATED 29 MARCH 2011

ADDITIONAL INFORMATION FOR A-A-55217

STANDARD SAMPLE FOR FOLIAGE GREEN 504 IS MIL-C-44436,

ROLL #3728, (THE FOLIAGE GREEN 502 AREA OF THE PATTERN)

AND REFERENCE FOR SHADE ONLY.

(T6855)

INCLUDE T6855 OBJECT TEXT ID ST

(11392)

ADDITIONAL INFORMATION FOR MIL-L-40051E:

NOTE: THE FOLLOWING REFERS TO MIL-L-40051D. THE

CURRENT VERSION IS MIL-L-40051E, DTD 3/29/91.

IN ACCORDANCE WITH MILITARY SPECIFICATION

MIL-L-40051D, 21 DEC 77, AMEND 1. 30 NOV 83

THE APPROVED WATER RESISTANT COMPOUNDS FOR THE

LEATHER, CATTLEHIDE, FOR GLOVE LEATHER MIL-L-

40051, MAY BE OBTAINED FROM THE 3M CORPORATION

PROTECTIVE DIVISION, ST. PAUL, MN. 55144-1000.

THE APPROVED COMPOUNDS ARE: FC-3564 & FX-3573.

(T0205)

ADDITIONAL INFORMATION FOR FED-STD-123:

NO ADDITIONAL INFORMATION FOLLOWS.

(T0211)

ADDITIONAL INFORMATION FOR FED-STD-311:

INTERIM CHANGES FROM FED-STD-311:

INTERIM CHANGE FROM CH NOT 1, 8/27/71:

SECTION 4, PARA. 4.5.1.2, LINE 8: DELETE THE PERIOD AFTER "BACKBONE" AND ADD "AND TO INDICATE THE ROOT OF THE TAIL".

INTERIM CHANGE FROM TEST METHOD 7011.1:

PARA. 4.1.2: DELETE ENTIRELY AND SUBSTITUTE THE FOLLOWING: "4.1.2 INDICATING DEVICE. THE INDICATING DEVICE SHALL BE EITHER OF THE KINDS LISTED BELOW.

4.1.2.1 THE SHRINKAGE METER DIAL. A DIAL INDICATOR HAVING A FACE DIVIDED INTO 360-380 DEGREES, WITH ONE REVOLUTION OF THE DIAL HAND CORRESPONDING TO 0.5 INCHES (12.7 MM) SPECIMEN MOVEMENT, WITH LEEWAY FOR FOUR REVOLUTIONS.

4.1.2.2 AGD DIAL INDICATOR. A MECHANICAL DEVICE CAPABLE OF REGISTERING ON A SCALE READING OF THE SHRINKAGE OR SWELLING RATIO OF THE SPECIMEN IN A RATIO OF 25 UNITS OF DIAL MOVEMENT TO ONE UNIT OF SPECIMEN MOVEMENT, OR GREATER, AND SHALL ACCURATELY DETECT THE POINT AT WHICH SHRINKAGE BEGINS BY THE MOVEMENT OF THE DIAL NEEDLE. THE INDICATOR SHALL HAVE A SPINDLE CAPABLE OF ATTACHMENT TO THE SPECIMEN AND TO THE ADJUST- ABLE WEIGHT ASSEMBLY (SEE 4.1.11)."

PARA. 4.1.3: DELETE "HEATING COIL" AND INSERT "IMMERSION HEATER".

PARA.7.1: DELETE ENTIRELY AND SUBSTITUTE THE FOLLOWING:

"7.1 THE THERMOMETERS MAY BE PURCHASED FROM THE THOMAS SCIENTIFIC CO. OR FISHER SCIENTIFIC CO., EACH HAVING REGIONAL OFFICES.

7.2 DIAL INDICATORS MAY BE PURCHASED FROM B. C. AMES CO., LEXINGTON STREET, WALTHAM, MA 02254."

(ref. T0211 - 5/23/06)

(T2119)

ADDITIONAL INFORMATION FOR ASTM-D1974:

NO ADDITIONAL INFORMATION FOLLOWS.

(T0356)

ADDITIONAL INFORMATION FOR ASTM D3951-90:

NO ADDITIONAL INFORMATION FOLLOWS.

(Ref. T0356 - 7/12/06)

(T8068)

ADDITIONAL INFORMATION FOR ASTM-D-6193(2004)OR LATEST VERSION:

NO ADDITIONAL INFORMATION FOLLOWS.

(Ref. T8068 - May 18, 2006)

(T0795)

ADDITIONAL INFORMATION FOR ANSI/ASQC Z1.4:

NOTE: THE MOST RECENT VERSION OF THIS DOCUMENT SHOULD BE USED.

APPLICATION FOR COPIES SHOULD BE ADDRESSED TO:

AMERICAN SOCIETY FOR QUALITY

600 NORTH PLANKINTON AVENUE

MILWAUKEE, WISCONSIN 53203

(Ref. T0795 - May 17, 2006)