836 River Street Scope of work - DRYWALL 10-13-2026.docx

SCOPE OF WORK

Supply and Installation of Drywall/Taping Project Address: 836 River Street, Troy, NY Building Type: Three-Story Residential Structure with Fire Sprinkler System

1. General Requirements Contractor shall provide all labor, materials, tools, equipment, supervision, and incidentals necessary to supply and install and finish drywall throughout the three-story residential structure at 836 River Street, Troy, NY. All work shall be completed in a professional and workmanlike manner and in accordance with applicable New York State Building Code requirements, local regulations, and manufacturer specifications.

2. Preparation and Framing Inspection

· Inspect all existing and new wall and ceiling framing prior to drywall installation.

· Verify framing is properly aligned, secure, and suitable for drywall installation.

· Notify the owner of any damaged framing, deficiencies, or conditions requiring correction before proceeding.

3. Supply and Installation of Drywall

· Supply and install new gypsum board on all interior walls and ceilings using ½” Drywall/Sheetrock. (EXCEPT BELOW)

· Bathrooms require moisture resistant ½’ Drywall.

· ALL SHARED /COMMON WALLS AND CEILINGS MUST USE 5/8” FIRE RATED DRYWALL and anywhere required by City of Troy Building Code.

4. Taping - Three-Coat Finish All drywall joints, seams, inside corners, outside corners, and fastener heads shall receive a complete three-coat joint treatment.

Unless otherwise specified, the required three coats refer to three applications of joint compound, in addition to the initial embedding of the tape as part of the first coat. A Level 4 finish is the intended standard for typical painted residential walls and ceilings.

5. Cleanup and Disposal

· Remove drywall scraps, empty compound containers, packaging, and other debris generated by the work.

· Keep work areas and common areas clean and orderly throughout the project.

· Protect existing finished surfaces, flooring, fixtures, and building components from damage during installation.

· Dispose of construction debris in accordance with applicable local requirements.

6. Contractor Pricing Requirements Contractor shall submit a complete price covering all labor, materials, equipment, delivery, installation, taping, three-coat finishing, sanding, cleanup, and disposal necessary to complete the work. All proposals must be submitted no later than Monday 10/13/2026. Contact Paul Donnelly for a site visit at 518-279-6631 Ext. 3 The proposal shall identify any exclusions, unit prices for additional work, and any assumptions regarding quantities or site conditions. No additional work or charges shall be authorized without prior written approval from TCLB or authorized representative.

image1.png