8150-01-533-8674 END ITEM DESCRIPTION AND REQUIREMENTS.pdf

8150-01-533-8674

CONTAINER,TRICON II

RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES

RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS

(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE

DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB

AT:

http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx

FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE

SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE

ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE

APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON

REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.

RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES

THIS NSN IS PROCURED AS FULLY COMPETITIVE IN

ACCORDANCE WITH A MILITARY / FEDERAL

SPECIFICATION/STANDARD. SEE SECTION L, CLAUSE

52.211-2 FOR ORDERING SUCH DATA.

SAMPLING:

THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ

H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE

SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,

STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR

AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF

VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED

ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE

SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER

MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR

PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT

SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT

UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.

MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL

NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT

CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED

UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY

USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED

INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS;

AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA.

PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS

CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN

A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR

MERCURY COMPOUND. (IAW NAVSEA 5100-003D).

NO ASBESTOS AS DEFINED IN FED-STD-313 IS

PERMITTED IN THIS ITEM

6' 5-1/2" L X 8' W X 8' H NEW (ONE-TRIP). CONTAINER SHALL NOT EXCEED ONE YEAR FROM THE DATE OF MANUFACTURE.

CORRUGATED STEEL SIDES, ROOF, AND SWING DOORS ON CURB AND ROAD SIDES.

HEAVY DUTY STEEL FLOOR.

4-WAY FORKLIFT POCKETS, 20 TOP AND BOTTOM RAIL LOOP TIE DOWNS, 20

SHORING SLOTS, 2 VENTS. CONNECTING COUPLERS (3), CONNECTING COUPLER

STORAGE BRACKET (1), ADJUSTABLE SHELVING BRACKETS (5 SETS), SHELF

DECKING BEAMS (3), ANTI-PILFERAGE PROVISIONS,

MANIFEST BOX (2). MANIFEST BOX(S) MOUNTED ON LEFT DOOR.

MAXIMUM TARE WEIGHT 2,800 LBS. MAXIMUM GROSS WEIGHT 14,900 LBS. THREE

TRICONS, WHEN COUPLED TOGETHER, WILL SHIP AS A 20' ISO-COMPATIBLE

CONTAINER.

MANUFACTURED TO THE LASTEST REVISION OF ISO 668, ISO 1161, ISO 1496-1,

ISO 6346, ISO 830 AND ISO 8323.

MUST BE CERTIFIABLE TO INTERNATIONAL CONVENTION FOR SAFE CONTAINERS

(CSC) AND INTERNATIONAL MARITIME DANGEROUS GOODS (IMDG) STANDARDS.

CONTAINER SHALL BE INSPECTED TO VERIFY COMPLIANCE WITH MIL-STD-209,

MIL-STD-810, MIL-STD-1366, MIL-STD-1472 AND MIL-PRF-32349A.

COLOR: Federal Standard 595 (FED-STD-595/34094 Camo-Green)

NON-CARC PAINT

COPIES OF ISO STANDARDS ARE AVAILABLE FROM THE AMERICAN NATIONAL

STANDARDS INSTITUTE (ANSI). USE URL WWW.ANSI.ORG

COPY OF INTERNATIONAL CONVENTION FOR SAFE CONTAINERS (CSC) IS AVAILABLE

FROM URL WWW.IMO.ORG

IAW BASIC DRAWING NR 14153 RE-015338674

REVISION NR DTD 08/10/2015

PART PIECE NUMBER:

IAW REFERENCE STD NR MIL-STD-209K

REVISION NR K DTD 02/22/2005

PART PIECE NUMBER:

IAW REFERENCE STD NR MIL-STD-810H

REVISION NR H DTD 01/31/2019

PART PIECE NUMBER:

IAW REFERENCE STD NR MIL-STD-1366E

REVISION NR E DTD 10/31/2006

PART PIECE NUMBER:

IAW REFERENCE STD NR MIL-STD-1472H

REVISION NR H DTD 09/15/2020

PART PIECE NUMBER:

IAW REFERENCE SPEC NR MIL-PRF-32349A NOT 1

REVISION NR A DTD 06/29/2016

PART PIECE NUMBER:

ADDITIONAL REQUIREMENTS:

ALL ISO coding, identification and markings (ISO 6346) shall be stenciled in white on the container.

Stenciling: US Army Registered BIC owner-code (USAU) stenciled in six (6) locations per ISO 6346 and curbside inside wall.

Door locking handle retainers: Fixed or pivoting hardware to hold the locking handle in the closed position and provide a means to place a lock and/or security seal on both doors.

Customs catch: A plate permanently affixed near center edge of outer door to preclude inner door opening without opening the outer door.

Manifest box: Mounted on left door.

Estimated delivery schedule: Vendor must provide the Contract and Delivery Location POCs with an estimated delivery schedule 30 days before delivery of any containers.

DoD Inspection Criteria: Containers must meet the inspections criteria of the MIL-STD-3037.

CSC Safety Approval Data Plate Requirements: