80TECH24Q0038 Amend 002 final.pdf

Offers must acknowledge receipt of this amendment prior to he hour and date specified in the solicitation or as amended, by one of the following me hods:

(a) By completing items 8 and 15, and returning or (c) By separate letter or electronic communication which includes a reference to the solicitation and amendment numbers. FAILURE OF YOUR ACKNOWLEDGMENT TO BE RECEIVED AT THE PLACE DESIGNATED FOR THE RECEIPT OF OFFERS PRIOR TO THE HOUR AND DATE SPECIFIED MAY RESULT IN REJECTION OF YOUR OFFER. If by virtue of this amendment you desire to change an offer already submitted, such change may be made by letter or electronic communication, provided each letter or electronic communication makes reference to the solicitation and this amendment, and is received prior to the opening hour and date specified.

E. IMPORTANT: Contractor is not is required to sign this document and return copies to the issuing office.

AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT 1. CONTRACT ID CODE

2. AMENDMENT/MODIFICATION NUMBER 3. EFFECTIVE DATE 4. REQUISITION/PURCHASE REQUISITION NUMBER 5. PROJECT NUMBER (If applicable)

7. ADMINISTERED BY (If other than Item 6) CODE

STANDARD FORM 30 (REV. 11/2016)

Prescribed by GSA FAR (48 CFR) 53.243

FACILITY CODE

9A. AMENDMENT OF SOLICITATION NUMBER

9B. DATED (SEE ITEM 11)

10A. MODIFICATION OF CONTRACT/ORDER NUMBER

10B. DATED (SEE ITEM 13)

11. THIS ITEM ONLY APPLIES TO AMENDMENTS OF SOLICITATIONS

The above numbered solicitation is amended as set forth in Item 14. The hour and date specified for receipt of Offers is extended. is not extended.

12. ACCOUNTING AND APPROPRIATION DATA (If required) copies of the amendment; (b) By acknowledging receipt of this amendment on each copy of the offer submitted;

13. THIS ITEM APPLIES ONLY TO MODIFICATIONS OF CONTRACTS/ORDERS.

IT MODIFIES THE CONTRACT/ORDER NUMBER AS DESCRIBED IN ITEM 14.

CHECK ONE A. THIS CHANGE ORDER IS ISSUED PURSUANT TO: (Specify authority) THE CHANGES SET FORTH IN ITEM 14 ARE MADE IN THE CONTRACT ORDER

NUMBER IN ITEM 10A.

B. THE ABOVE NUMBERED CONTRACT/ORDER IS MODIFIED TO REFLECT THE ADMINISTRATIVE CHANGES (such as changes in paying office, appropriation data, etc.) SET FORTH IN ITEM 14, PURSUANT TO THE AUTHORITY OF FAR 43.103(b).

C. THIS SUPPLEMENTAL AGREEMENT IS ENTERED INTO PURSUANT TO AUTHORITY OF:

D. OTHER (Specify type of modification and authority)

Except as provided herein, all terms and conditions of he document referenced in Item 9A or 10A, as heretofore changed, remains unchanged and in full force and effect.

15C. DATE SIGNED

15A. NAME AND TITLE OF SIGNER (Type or print)

16C. DATE SIGNED

16A. NAME AND TITLE OF CONTRACTING OFFICER (Type or print)

14. DESCRIPTION OF AMENDMENT/MODIFICATION (Organized by UCF section headings, including solicitation/contract subject matter where feasible )

PAGE OF PAGES

6. ISSUED BY CODE

8. NAME AND ADDRESS OF CONTRACTOR (Number, street, county, State and ZIP Code) (X)

CODE

15B. CONTRACTOR/OFFEROR

(Signature of person authorized to sign)

16B. UNITED STATES OF AMERICA

(Signature of Contracting Officer)

Previous edition unusable

ITPO

N/A

CHRISTINA M. OSTRONIC, Contracting Officer

The purpose of Amendment 002 is to:

1. Incorporate a revised Attachment A: Statement of Work into the solicitation.

2. Extend the deadline for quotes from Thursday, August 22, 2024 to Friday August 23, 2024 at 4:00pm EDT.

ITPO

NASA/ Information Technology Procurement Office Headquarters Washington, DC 20546-0001

NASA/ Information Technology Procurement Office Headquarters Washington, DC 20546-0001

N/A

80TECH24Q0038

1 2

08/09/2024

8/21/2024

Attachment A

STATEMENT OF WORK

1. Objective/Requirements

The NASA Glenn Ballistics Impact Laboratory has a need to purchase two (2) monochrome 7510 Phantom High-Speed Cameras or equivalent that will be used with NASA-owned 2023 Zeiss Inspect Correlate Professional Software. The cameras will be used to capture high speed synchronous images on the backside of impact tested structures or flat panels to allow the digital image software to calculate strains and displacements. This type of data is mainly used to validate computer models that predict damage and failure in tested structures.

NOTE: In accordance with FAR 52.211-6, where brand names are indicated, the Contractor shall provide brand name or equal. Purchase description reflects the characteristics and level of quality that shall satisfy the Government’s needs. The salient physical, functional, or performance characteristics that “equal” products must meet are specified in the solicitation.

2. Characteristics and Scope: Brand Name or Equal

The contractor shall perform the following duties:

Supply two Mono Phantom TMX 7510 High speed cameras or equivalent for use with Digital Image Correlation (DIC) Software.

3. Specifications Cameras shall provide image sync as they will be used as a camera pair for

Digital Image Correlation.

Cameras need to have a minimum resolution of at least 1280 pixels x 800 pixels and operate at 76,000 frames per second at this resolution.

One (1) camera must have a 38 nanosecond exposure and the second camera must have a minimum of a 59 95 nanosecond exposure.

Each Camera must have at least 512 128 GB of RAM.

Each Camera must have a minimum of 12-bit image depth.

Each Camera must be able to save images as a cine file. This type of file can be automatically imported into the DIC software and keep its interstage times.

4. Place of Performance NASA Glenn Research Center

5. Period of Performance Cameras need to be delivered on or before 6 weeks after receipt of order (ARO).