SATPC0043275 Tab 04 4 SOW.pdf

PDF 177 KB Posted

Attached to
NEEDED FOR PANEL MODS ON ESR GP00688 AND GP00694
Solicitation number
80NSSC27949500Q
Issued by

About this file

This is a Statement of Work for the procurement and delivery of safety relief valves for panel modifications at Kennedy Space Center's Launch Equipment System (LES).

The requirement specifies a quantity of six (6) Flow Safe brand relief valves, model S848B-01FM0-01FM0-SS-SS-TT-60 (OEM Part #482000T030362), rated at 60 PSIG with a .261 square inch orifice area. The valves feature 316 stainless steel bodies with 316 stainless steel trim, one female MS inlet and outlet connections, Teflon seats and seals, and are ASME Section XIII compliant spring-operated relief valves designed for gas service with a 7-10% blowdown and 60-degree Fahrenheit relieving temperature. The seller must provide a set pressure test report, manufacturer certificate of conformance, and either hydrostatic (1.5x MAWP) or pneumatic (1.25x MAWP) leak test documentation. The manufacturer's certificate must include part number and specification, quantity, manufacturing location, lot/heat/batch/date code/serial number as applicable, and customer order number. If distributed through an authorized distributor, evidence of authorized distributor status from the OEM must be attached. The seller must also provide evidence of all inspections and tests performed in accordance with order and specification requirements. Installation will occur at the LES at Kennedy Space Center with a delivery need date of October 24, 2026. The work supports panel modifications referenced under Engineering Service Requests ESR GP00688 and ESR GP00694.

View the file

Other files

File Type Posted
SATPC0043275 Tab 10 Open Market RFQ.pdf PDF

On GovTribe

Work with this file

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file

Text version

STATEMENT OF WORK

1. Objective/Requirements The use of the safety relief vales is part of panel modifications issued under ESR GP00688 and ESR GP00694.

2. Characteristics, Scope, and Specs

Quantity OEM Part # Product Description

S848B-01FM0-

01FM0-SS-SS-TT-

482000T030362

VALVE, RELIEF, 60 PSIG

P/N: S848B-01FM0-01FM0-SS-SS-TT-60

MFR: FLOW SAFE

DESC: 60 PSI RELIEF VALVE

F84B-4, 1 FEMALE MS X 1 FEMALE MS

ASME SECTION XIII

SPRING OPERATED SRV

316 SS BODY WITH 316 SS TRIM

ORIFICE AREA: .261 SQ. INCHES

INLET: 1 FEMALE MS

OUTLET: 1 FEMALE MS

SERVICE: GAS

SET PRESSURE: 60 PSIG

BLOWDOWN: 7-10%

RELIEVING TEMP: 60 DEG F

SEAT: TEFLON

SEALS: TEFLON

REQUIRES SET PRESSURE TEST REPORT.

REQUIRES MANUFACTURER CERTIFICATE OF

CONFORMANCE.

REQUIRES HYDROSTATIC OR PNEUMATIC LEAK

TEST (1.5 X MAWP HYDROSTATIC TEST OR 1.25 X

MAWP PNEUMATIC TEST).

QC03 Manufacturer’s Certificate of

Compliance The Manufacturer shall provide a certification with each shipment to attest that the parts, assemblies, subassemblies, or detail parts conform to the Order requirements. When applicable, the true manufacturers, lot, heat, batch, date code, and/or serial number must appear on the certification.

Certification must contain the following:

• Part number / Specification

• Quantity

• Name and address of manufacturing or processing location

• Manufacturer’s lot, heat, batch, date code, and/or serial number (if applicable)

• Customer’s Order number when ordering directly from the manufacturer.

If Authorized Distributor, include Authorized Distributor Name and Evidence from the OEM that seller is an Authorized Distributor – attached to Certificate

QC07 Evidence of Test The Seller shall provide results of inspections and tests (e.g., nominal operating load or pressure, maximum proof load or pressure the hardware was subjected to, electrical resistance, continuity & nondestructive testing/reports) performed by the Seller in accordance with the Order and specification requirements.

3. Place of Performance

Installation will be performed at the LES at Kennedy Space Center.

4. Period of Performance Need date is by October 24th, 2026

File details come from the government source that posted it. Updated .