Tab 04 SOW.pdf
PDF 359 KB Posted
- Attached to
- Development and Optimization of Custom Pigmentation of Textiles for Artemis Suit Materials Project Phase IV
- Solicitation number
- 80NSSC27949350Q
About this file
This is a Statement of Work for a pigmented coating pilot under the Artemis Suit Materials project, issued as a Request for Quotation on 5 October 2026 (Revision A).
The contractor shall apply a flexible white pigmented coating to seven Government-furnished textiles (woven basalt, Versive BetaCloth, PTFE laminated fabric, JPS Kevlar 775, custom Vectran/Kevlar weave, Teflon T162, and Vectran Turtleskin Style 1410) and produce documented, representative coated material for adhesion and handling assessment. The base scope includes five tasks: planning and material receipt; coating both sides of textiles using IPA wipe cleaning in a single spray session with room-temperature curing; preparing and returning large coated sheets with cutting-trial and witness samples; documenting adhesion and handling through tape pulls, cutting trials, rolling, folding, and direct-contact blocking assessments; and performing bakeout comparison at 125°C for 48 hours with pre- and post-bakeout adhesion testing. The contractor must record material identity, cleaning agent, application method, coating formulation, cure conditions, temperature and humidity, coating usage or thickness, and photograph surfaces and anomalies. The Government will cut final test specimens and conduct thermal cycling, cryogenic testing, sewing, tumbler abrasion, UV exposure, and optional ASTM E595 or toxicity testing. Five separately priced options are available: multicolor graphics, UV campaign specimens, qualification specimens, additional coating build, and pre-coating textile bakeout. Deliverables include a kickoff sheet layout, labeled coated sheets with controls and photographs, a brief technical report with application records and test results by substrate, and shipment inventory with traceability. The quotation shall be submitted as fixed-price line items for base tasks and each option, with specified coated sheet dimensions and area by textile, witness allocations, separately priced reserve area, minimum material quantities and lead time, bakeout assumptions, shipping costs, schedule from material receipt, and any exceptions or recommended changes.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| Tab 07 Capability Statement.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
`Statement of Work for Pigmented Coating Pilot Request for quotation | Artemis Suit Materials project | Revision A | 5 October 2026
The contractor shall quote a pilot application and evaluation of a flexible white pigmented coating on Government-provided textiles. The work will produce documented, representative coated material for adhesion and handling assessment and for subsequent Government-led environmental testing. This SOW defines a base effort and separately priced options so quantities and cost can be adjusted after sample layout is agreed.
1 Technical basis and objective
Preliminary trials of a flexible white pigmented coating on seven textiles showed encouraging tape adhesion and manual bend performance after a single spray session with IPA wipe cleaning and no primer. Minor bubbling occurred on one side of a laminated PTFE construction. These observations are preliminary and shall be documented and evaluated on larger specimens under this pilot.
The pilot shall determine whether the coating can be applied reproducibly, survive cutting, sewing and representative folding or rolling, maintain adhesion after bakeout, and provide suitable specimens for cryogenic, abrasion, UV, and material qualification assessments. No dust barrier or flight qualification is assumed from this effort.
2 Government furnished materials and sample plan
The Government will provide identified fabric lots with face and back orientation marked, where applicable. The initial seven candidates are listed below; the Government may substitute an equivalent candidate before quote acceptance without increasing the count. The contractor shall propose the usable coated sheet dimensions needed to yield the planned specimens, separate cutting-trial samples and witness samples, with allowance for spray margins and cutting losses. Identify additional usable reserve area and its price in the quotation to support repeat tests, added test opportunities, and future exposure specimens such as MISSE.
Candidate Material or construction 1 Woven basalt textile, with existing mineral oil finish 2 Versive BetaCloth
3 PTFE fabric laminated with fluoropolymer film (identified as FEP in the earlier list; confirm construction)
4 JPS Kevlar 775 5 Custom Vectran/Kevlar weave; limited supply 6 Teflon T162 plain weave 7 Vectran Turtleskin Style 1410
The Government will also provide clean PTFE film sheets or strips for optional coating or coating-on-substrate outgassing specimens. The exact material IDs, lot sizes, coating face orientation, and graphic candidates shall be recorded at kickoff.
3 Base scope of work
Task 1 Plan and receive materials. The contractor shall review the specimen schedule with the Government, document incoming condition, and agree on usable coated sheet dimensions. The contractor will coat large pieces, and JSC will cut test specimens as needed. Provide representative coated offcuts or small samples from each textile for cutting trials. The objective is to establish one repeatable cutting method applicable across the textiles that minimizes fiber fraying and foreign object debris (FOD). The contractor shall document candidate methods and edge condition, and JSC will evaluate their suitability for routine specimen preparation. Report any textile requiring a different method. No substitution of primer or surface treatment shall occur without Government approval.
Task 2 Coat the textiles. Clean the seven textiles using an IPA wipe and apply flexible white pigmented coating to both sides in a single spray session. Multiple passes within that session are permitted as required by the application process. Spray pass or coat count may be retained in internal process notes but shall not be a specified acceptance or quality control requirement. Record material identity, sides coated, cleaning agent, application method, coating formulation or batch, cure or dry conditions, and coating usage or dry add-on and thickness where measurable.
Room-temperature curing is acceptable under the applicable coating procedure. Manually record the laboratory temperature and relative humidity, application and cure dates, and elapsed cure time before handling or testing; a continuous cure chart is not required. Photograph representative surfaces and any bubbles, penetration, or other anomalies. Keep a small uncoated control from each material where sufficient stock permits.
Task 3 Prepare and return coated sheets. Supply large coated pieces for JSC to cut, together with the agreed cutting-trial and witness samples. Identify usable dimensions, orientation, material lot and coated faces on each piece or its packaging. Package with suitable release material or separation to prevent unintended sticking or surface damage during shipment. The specimen schedule below is a planning basis for the minimum usable coated area, not a requirement for the contractor to deliver individual precut coupons. Provide the three Kevlar tumbler panels through sufficient usable sheet area to yield three 15 × 7 in panels. Agree on reduced allocations for scarce fabric and separately identify reserve area in the quote.
Use Planned JSC specimen yield per material Test lead
Thermal cycling and roll handling 2 at 12 × 2 in Government LN2 crack and hard crease 2 at 8 × 8 in Government Sewing, air permeability, mass, thickness, reserve 6 at 5 × 5 in Government
Cryogenic Scott crease flex 2 at 1 × 5 in Government Rotary tumbler abrasion and dust resistance with lunar simulant 3 at 15 × 7 in, Kevlar only Government
Task 4 Document adhesion and handling. On representative witness coupons for each substrate and each coated face, perform and photograph tape pulls using a specified tape and consistent procedure. Report the tape, dwell and removal conditions, coating transfer, substrate damage, and bubbling. Assess cut edges, moderate and tight rolling, and folding. Coating-to-coating blocking means adhesion or sticking between coated surfaces held in direct contact during rolling or folding, which may impede separation or cause coating transfer, tearing, or other damage when opened. Test direct coated-surface contact without an interleaf under agreed contact duration, temperature and pressure or roll tension. Record roll diameter or bend radius, opening behavior, and visible cracking, shedding or layer distortion. If blocking occurs, evaluate a suitable release interleaf to determine whether separation material is needed for storage or transport. Packaging protection does not substitute for the direct-contact blocking assessment. These are comparative screening tests, not a claim of ASTM D3359 compliance unless that method is followed in full.
Task 5 Bakeout comparison. After room-temperature cure, document baseline adhesion and appearance on representative witnesses before bakeout. Bake all coated sheets and test specimens, including at least one representative witness for each substrate and coating configuration, at 125 °C for 48 hours under agreed conditions. Retain a separate unbaked coated witness for each substrate and configuration as the comparison control. Record atmosphere, pressure, time at temperature, ramp and cooldown, and any changes in appearance.
Repeat the same adhesion and handling observations after bakeout. The Government and contractor shall confirm substrate compatibility and whether the bakeout will occur under vacuum before finalizing the quotation. Pre-coating bakeout of bare textiles is not included in the base effort; propose it as Option E with a material-specific rationale and conditions. Perform it only after Government authorization, particularly for fabrics with existing finishes, films, or laminate adhesives.
4 Separately priced options Option Requested work
Option Requested work
A Multicolor graphics
On Government-selected candidate fabrics, apply red and blue masked stripes over a white background in the intended layer sequence. Use separate stripes to evaluate each color over white and include exposed white background for comparison.
Government and contractor shall agree on stripe dimensions and any color overlap before application. Repeat adhesion, cutting, tight rolling or folding, and direct-contact blocking observations after all graphic layers have cured. Include the graphic specimens in the post-coating bakeout and comparison plan.
Quote number and size of graphics and setup or masking charges separately.
B UV campaign specimens
Produce three coated replicates plus an uncoated control for each of Vectran, Ortho Fabric, and one Kevlar-based candidate, nominally 2 × 2 in or a Government-approved strip fitting the Marshall fixture. Identify coating and substrate orientation. Ship directly to Marshall or release for local pickup. The Government will perform UV exposure and post-exposure color and mechanical tests.
C Qualification specimens
Supply white and any selected colored coating on PTFE film or another agreed substrate, with appropriate uncoated controls or recoverable coating material for Government-directed ASTM E595 and toxicity evaluation. Quote preparation separately;
laboratory testing is excluded unless separately specified.
D Additional coating build
Quote an additional application session or primer variant on selected substrates if the baseline shows a need for improved opacity, pore coverage, or adhesion. Document the application sequence and added mass and thickness where measurable.
Provide matched baseline specimens from the single spray session. Pass count is not an acceptance requirement.
E Pre-coating textile bakeout Propose and separately price bakeout of bare textiles before coating, with a rationale, material compatibility assessment, atmosphere, temperature and duration. Identify any risk to existing finishes, films or laminate adhesives. Final conditions and affected textiles require Government approval before processing.
5 Deliverables and acceptance
Kickoff sheet layout identifying usable dimensions and area by material, the Government specimen cutting plan, cutting-trial and witness allocations, material limitations, and separately priced reserve area.
Labeled coated sheets, representative cutting-trial samples, uncoated and unbaked controls as agreed, and photographs of surfaces, cut edges, and any defects.
Brief technical report with application records, manually recorded cure temperature and relative humidity and elapsed cure time, coating add-on or thickness where measurable, cutting-trial observations, pre- and post-bakeout results, tape-pull details, roll/fold/blocking conditions, and results by substrate and face. Include unsuccessful trials. Continuous cure charts and a prescribed spray pass count are not required.
Shipment or pickup inventory and traceability from incoming fabric lot to returned specimen. Deliver electronic report and images in commonly readable formats.
The Government will accept the pilot deliverables when the agreed specimens and records are provided. The pilot does not impose a pass or fail threshold for adhesion, color, dust penetration, or environmental durability; observed failures shall be reported rather than discarded.
6 Responsibilities and quote response
The Government supplies textiles and PTFE film, confirms the sample matrix and Marshall UV geometry, and performs thermal cycling, cryogenic crease and flex, sewing, tumbler abrasion and dust resistance, UV, optical/color, and any ASTM E595 or toxicity testing unless separately added to the quotation. The contractor performs the coating, agreed in-house screening and bakeout comparison, documentation, and specimen delivery.
The Government will share environmental test failures with the contractor for interpretation and possible follow-on formulation work.
Please quote the base tasks and each option as separate fixed-price line items. State usable coated sheet dimensions and area by textile, witness and cutting-trial allocations, separately priced reserve area, minimum Government furnished material quantities and lead time, bakeout atmosphere and substrate compatibility assumptions, shipping or pickup costs, schedule from receipt of material, and exceptions or recommended changes. Identify any proposed pre-coating bakeout separately under Option E. Do not begin optional work without written authorization.
File details come from the government source that posted it. Updated .