SATPC0043245 Tab 04 4 SOW..pdf

PDF 142 KB Posted

Attached to
Lot of 467 nm Ultra-Narrow Bandpass Filters
Solicitation number
80NSSC27949303Q
Issued by

About this file

This is a Statement of Work for the manufacture and delivery of two 467 nm ultra-narrow bandpass filters for integration into an existing airborne lidar system at NASA Langley Research Center.

The contractor shall manufacture and deliver two ultra-narrow (0.3 nm) bandpass/out-of-band blocking filters with a center wavelength of 467.8423 nm (in-vacuum). Mechanical specifications require the filters to be mounted in black anodized aluminum rings with a diameter of 38.1 +0/-0.2 mm, a clear optical aperture greater than 34 mm diameter, mount thickness of 3.5 ± 0.1 mm, and optical substrate thickness of 2.0 ± 0.1 mm using fused silica (Corning 7980 or Ohara SK1300). Parallelism shall be less than 30 arc-seconds, surface quality shall be 60-40 per ANSI OP1.002, and total wavefront error shall not exceed 2.0 waves peak-to-valley at center wavelength. Optical requirements specify a center wavelength tolerance of 467.8423 +0.050/-0 nm at 0° angle of incidence with a 2° cone half-angle (35 mrad), full-width half-maximum width of 0.3 ± 0.1 nm, peak transmission greater than 80%, operating temperature range of 45-55°C, center wavelength shift due to temperature less than 0.003 nm/°C, and out-of-band transmission of 1/100,000 (1E-5) for the 200-800 nm wavelength range. The required lead time is 8 weeks after receipt of order, with delivery to NASA Langley Research Center, 21 Langley Boulevard, Building 1250, Room 154, Hampton, Virginia 23681.

View the file

Other files

File Type Posted
SATPC0043245 Tab 10 RFQ Open Market Template.pdf PDF

On GovTribe

Work with this file

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file

Text version

Statement of Work - 467 nm Ultra-Narrow Bandpass Filters

1. Introduction Two 467 nm ultra-narrow bandpass/out-of-band blocking filters are required for the addition of new measurement capabilities to an existing airborne lidar system. The specified dimensions and optical performance laid out in this statement of work are critical to implementing this new capability successfully into the existing design.

2. Description of Work and Technical Requirements

The objective of this work is to manufacture and deliver a quantity of two ultra-narrow (0.3 nm) bandpass/out-of-band blocking filters with a center-wavelength of

467.8423 nm (defined in-vacuum). The specifications are as follows:

Mechanical

- The filter shall be mounted in a black anodized aluminum ring with a diameter of

38.1 +0/-0.2 mm.

- The clear optical aperture shall be > 34 mm diameter.

- The mount thickness shall be 3.5 +/- 0.1 mm

- The optical substrate thickness shall be 2.0 +/- 0.1 mm

- The optical substrate shall be fused silica (Corning7980 or OharaSK1300)

- Parallelism shall be < 30 arc-seconds

- Surface quality shall be 60-40 per ANSI OP1.002

- Total wavefront error shall be s; 2.0 waves peak-to-valley at the center wavelength

Optical

- The center wavelength shall be 467.8423 +0.050/-0 nm (as measured in vacuum).

- The angle of incidence shall be 0° with a cone half-angle of 2° (35 mrad).

- The full-width half-maximum (FWHM) width of the filter shall be 0.3 ± 0.1 nm.

- Peak transmission shall be >80%

- The operating temperature of the filter center wavelength shall be between 45-

55)C.

- Center wavelength shift due to temperature shall be < 0.003 nm/°C.

- The out-of-band transmission shall be 1/100,000 (1E-5) for the wavelength range of 200-800 nm.

3. Lead-time

8-weeks ARO

4. Place of delivery NASA Langley Research Center

ATTN:

21 Langley Blvd, B1250, R154 Hampton VA 23681

Statement of Work - 467 nm Ultra-Narrow Bandpass Filters
2. Description of Work and Technical Requirements
Mechanical
Optical

File details come from the government source that posted it. Updated .