SATPC0043193 Tab 04 4 SOW..pdf
PDF 210 KB Posted
- Solicitation number
- 80NSSC27948857Q
About this file
This is a Statement of Work for the procurement of high-speed cameras for unsteady Pressure Sensitive Paint (uPSP) data acquisition at NASA Langley Research Center.
The procuring agency requires delivery of two high-speed monochrome cameras with supporting equipment within 90 days of receipt or order. The cameras must employ a 12-bit CMOS back side illuminated sensor with a minimum of 1 million pixels and pixel size of at least 18 micrometers by 18 micrometers. The cameras shall acquire full-resolution images at frame rates of at least 20,000 frames per second, operate at frame rates up to 480,000 fps at reduced spatial resolution, and feature minimum exposure times less than 2 microseconds. Additional technical requirements include internal memory of at least 128 GB, capability for external hard drive storage, TTL pulse and switch closure operation, output signals for monitoring and synchronization, 10 GigabitEthernet interface for control and data recovery, and operation at temperatures up to 50°C. The deliverables include two cameras with on-board memory, three external hard drives with 8 terabyte capacity each, one reading station capable of interfacing with the external drives via 10 GigabitEthernet, and two wheeled carrying cases for transport. The equipment will be shipped to NASA Langley Research Center.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| SATPC0043193 Tab 06 RDSS..pdf | ||
| SATPC0043193 Tab 07 Capability Statement.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
STATEMENT OF WORK PROCUREMENT OF HIGH-SPEED
CAMERA
1.0 Introduction/Background: Currently, there is a need for high-speed cameras for time-resolved and dynamic measurement of many different aerodynamic phenomena.
One of these areas that is expanding is the measurement of global dynamic surface pressures using unsteady Pressure Sensitive Paint (uPSP). This has been demonstrated to provide global surface pressures with dynamic content up to 20 kHz (and even higher).
One of the requirements for this work is a high-speed camera suitable for providing this information.
2.0 Scope of Work: The scope of this work is to purchase two (2) high-speed monochrome cameras for acquiring uPSP data in the laboratory and various wind tunnel facilities. It will also acquire external hard drives for the cameras to allow rapid storage of data on the camera.
3.0 Objectives: Acquiring this camera will enable the collection of uPSP data that will provide global dynamic surface pressure information. This camera will be used in conjunction with other high-speed cameras as needed.
4.0 Description of the Work/Contractor Tasks: The task of this SOW is the delivery of two (2) high-speed monochrome camera monochrome camera capable of incorporating an external hard drive and cabling. This will also include the purchase of three (3) proprietary external hard drives for the cameras as well as one (1) station for reading the external hard drives. Finally, two (2) carrying cases with wheels for transporting the cameras will be acquired. The specific requirements for these are:
• The cameras shall employ a 12-bit CMOS monochrome sensor with a minimum of 1 million pixels
• The camera shall employ a back side illuminated (BSI) sensor for improved collection of photons in low-light situations
• The size of each pixel shall be at least 18 µm x 18 µm
• The cameras shall be able to acquire full sized images (i.e. using all of the sensor pixels) at frame rates of at least 20,000 frames per second (fps)
• The cameras shall be able to operate at frame rates of at least 480,000 fps albeit with lower spatial resolution
• The cameras shall be able to operate with a minimum exposure time (electronic shutter speed) of less than 2 µs
• The cameras shall have an internal memory of at least 128 GB
• The cameras shall have the capability to include an external storage option that can allow transfer of the onboard memory.
• The cameras shall be able to be operated by external means as needed. This will include the use of TTL pulses and switch closures
• The cameras shall have a way to provide output signals (such as trigger, sync, exposure, etc.) for monitoring and synchronizing
File details come from the government source that posted it. Updated .