SATPC0043186 TAB 07 SOW PRINTED.pdf

PDF 93 KB Posted

Attached to
Silicone Free Annealing Oven
Solicitation number
80NSSC27948735Q
Issued by

About this file

This is a Statement of Work (SOW) for a silicone-free annealing oven to be delivered to NASA Goddard Space Flight Center (GSFC) for installation in a cleanroom environment.

The contractor shall deliver an all-new, unused vacuum oven capable of annealing ultraclean samples at temperatures up to 260°C. The oven must be fully silicone-free in all gaskets and interior/exterior parts to prevent molecular contamination, feature clean polished interior surfaces that do not shed particles, and include a replaceable nitrogen purge filter with flow control. Key specifications include: work chamber dimensions of 15" x 14" x 14" (1.6 cubic foot capacity); overall external dimensions of 32.5" x 39" x 21.5"; 3 kW heater operating on 240V single-phase power with ±1°C uniformity at 100°C, ±2°C at 200°C, and ±3°C at 260°C; 240 CFM airflow capacity; nitrogen process gas capability at 58-86 psi with 200 CFH maximum; cooling water supply at 100 psi maximum; and an Emergency Power Off button. The oven must accommodate 4" or 6" disc samples in a holder suitable for small batches of up to 10 samples, include an LCD display with three operating modes (Manual, Timer, Profile), four dry contact relay outputs, and stainless steel 304 construction with 3 inches of insulation. The contractor must provide technical drawings and facility inspection opportunity for NASA acceptance prior to shipment, deliver overnight with protective packaging, complete all work within six months of award, and provide a one-year warranty with parts replacement for defects upon installation. Delivery is 15 weeks from award date. Payment terms allow invoicing of 50% upon award receipt for parts procurement and 50% upon factory acceptance and shipment, including shipping charges. NASA GSFC covers freight charges and provides labor for uncrating, electrical connections, utilities, and HEPA filter installation and burn-off.

View the file

On GovTribe

Work with this file

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file

Text version

Statement of Work (SOW) Project: Silicone Free Annealing Oven

GENERAL INFORMATION

1.0 Scope of Work: This document describes the silicon free annealing oven for installation in the cleanroom at NASA GSFC. The function of the oven is described, including vacuum performance, size, construction (i.e., silicone free), cleanroom compatibility, temperature range, calibratability, and other performance characteristics. The document further describes the expectations for schedule of completion of the work, support for packaging and shipping, support for installation of the item and any needed training or customer support to get the tool operational, and warranty of its performance for a one year time period.

2.0 Background: NASA GSFC has a need to anneal ultraclean samples at temperatures up to 260 C. These samples are thin metal films on silicon substrates (or similar metal and dielectric materials) and, post annealing, go on to become device wafers for engineering prototypes and flight instruments and have requirements for molecular and particulate contamination. The samples are relatively small (4” and 6” discs coated with thin films) so the oven needs to be sized appropriately for a holder suitable for a small batch (up to 10) of such samples. The filtration and flow control on the dry nitrogen purge are also critical as the samples tend to absorb humidity and the goal of the annealing is reproducibility of the temperature cycle without inducing unwanted aging in the samples. The oven will be housed in a cleanroom environment and is expected to be fully cleanroom compatible and silicone-free for all gaskets and interior and exterior parts, in order to reduce the possibility of molecular contamination with difficult to remove contaminants like silicone.

3.0 Objective: NASA GSFC will obtain a vacuum oven suitable for installation in a cleanroom meeting specifications for interior cleanliness, nitrogen purge flow and filtration, oven interior and exterior size (footprint and height), silicone-free construction.

CONTRACTOR REQUIREMENTS

4.0 Technical Requirements or Description of the Work:

The oven shall be all new construction. No used or refurbished systems will be accepted.

The exterior of the oven shall be silicone free and suitable for a cleanroom environment

The interior of the oven shall be clean polished surfaces that can be cleaned of particles and do not shed particles

The oven shall be supplied with a nitrogen purge.

The oven nitrogen purge shall be filtered with a replaceable filter and have control over the flow as indicated in the specifications

The oven shall have an interior sized to be suitable for a holder with 4” or 6” discs but not exceed the overall exterior size indicated in the specifications

The oven shall be supplied with an Emergency Power Off (EPO) button or switch

II. Specifications

Work chamber (W x D x H): 15 x 14 x 14" (38 x 36 x 36 cm). Shelf supports restrict overall clear width to 13.5” (35 cm)

Capacity: 1.6 cubic foot (45 liters).

Overall external dimensions (W x D x H): 32.5 x 39 x 21.5” (83 x 99 x 54.6 cm).

Heater with fast response open coils: Power Rating: 3 kW on 220-240/1/50-60 power

Operating range: 40°C to 260°C (104°F to 500°F). Minimum operating temperature is based on 20°C ambient temperature measured at the fresh air inlet.

Temperature displays in degrees Centigrade unless advised otherwise at time of order.

Recirculating motor and fan wheel: 1/4 HP; airflow capacity: 240 CFM (18.9 LPS)

Horizontal airflow for maximum temperature uniformity: Uniformity Ratings: +/- 1°C at 100°C +/- 2°C at 200°C +/- 3°C at 260°C

The oven performance for this design has been verified with a 9 point survey in an empty oven after stabilization.

Standard Power and Utilities Required: Available Voltages: 240 Volts, 1-phase, 50/60 Hertz.

Max amp draw: 15.5A

Available Voltages for Additional Cost 208V,1-phase Full 3 kW Power, 50/60 Hertz

The Short Circuit Current Rating (SCCR) for this equipment is 5kA. The main electrical connection on this equipment is not compatible with a Residual Current Circuit Breaker (RCCB). If either of these options require higher ratings to comply with facility requirements, contact Despatch Engineering for feasibility and pricing information.

Process gas (Nitrogen, inert gas or CDA) 58-86 psi (4-6 bar)

200 FH (95 lpm) maximum

1/4" NPT connection

Cooling water inlet, outlet and drain 100 psi (6.9 bar) max, 20 psi (1.4 bar) minimum pressure differential

2 gpm (7.6 lpm) nominal, 5 gpm (19 lpm) maximum Three (3) 3/8" NPT connections LCD display shows temperature process value and setpoint, high limit setpoint, and time or profile progress Three operating modes for quick and easy operation: Manual mode, Timer mode, Profile mode Four dry contact relay outputs can be configured to function as alarms, events, or end of cycle, in any operating mode Consists of a red light and a small alarm horn. A switch is provided to silence the alarm.

Shelf dimensions (W x D) are: 14.60 x 13.75" (37.0 x 35.0 cm).

Max 25 lbs. (11 kg) per shelf. Overall load capacity of 200 lbs. (90 kg).

Oven can accommodate up to five (5) shelves.

Forced exhaust: 35 CFM (16.5 LPS) for rapid cooling (Air atmosphere models only) or for process gas exhaust.

Microprocessor-based temperature and high-limit controller with large LCD display and real time clock for auto start capability.

Air & Nitrogen atmospheres available.

Magnehelic™ gauge monitors and indicates the HEPA filter pressure providing an indication of filter status and the need for filter maintenance.

Lockable Disconnect Switch on the control panel for easy servicing.

Programmable door locks prevent the door from opening when a cycle is in process. Door switch terminates power to the heater when door is open.

Electric door-release for ergonomic operation.

A 1” (2.5 cm) port with tri-clamp cap in rear of oven for temperature surveys.

End of Cycle/Hi limit Audible and Visual Alarm RS-485 Modbus enables communication from controller to DB-9 connection for computer interface. A RS-485 converter is required between computer and oven. If customer desires to write their own programming, a manual with all language recognized by controller is provided.

Stainless steel (304) interior and exterior with all interior seams welded to protect work chamber from contamination.

Chamber designed with 3 inches (7.6 cm) of high-grade insulation to minimize heat loss, external body temperature and air leakage.

Oven is UL & C-UL listed open control panel.

Two Stainless Steel wire shelves adjustable on 2" (5 cm) centers are provided.

Oven weight is approximately 250 lbs. (114 kg). Shipping weight is approximately 492 lbs.

(223 kg).

Detailed electronic instruction manual.

Vendor shall provide drawings of planned tool extents and location and details of utility hook-ups for approval by NASA GSFC technical representative.

Vendor shall provide opportunity for NASA Technical representative to visit their facility (in person or remotely) in order to accept the tool prior to shipping. Vendor shall provide evidence of the functionality of the tool and demonstrate it having met all specifications.

Delivery: 15 weeks from date of award

Vendor will ship overnight and provide suitable packaging to ensure the fragile items are protected during shipment

Payment: Vendor can invoice up to 50% upon receipt of the award in order to procure necessary parts for the assemblies.

Vendor can invoice the remainder upon factrory acceptance and shipping and include shipping charges with final invoice.

Guarantee: Vendor shall replace parts found to be defective upon installation in the tool.

Period of Performance: Vendor shall complete all work within 6 months of date of award.

5.0 Government Furnished Information:

Government will cover Freight charges

Unless otherwise specified, shipments are made by covered van with no side access. An elevated dock and a fork truck suitable for offloading the truck are required at the customer site

Labor and equipment to uncrate and move oven to installation location.

Installation and burn-off of HEPA filter per instructions in the oven manual, including the post burn-off cleaning of the chamber.

Electrical service connections and other utilities such as gas, CDA, nitrogen or water, as required.

Provide cooling source and stack to exterior of building for ventilation if required.

Any special equipment that may be required to meet local codes.

6.0 Applicable Documents: None

7.0 Security Requirements: None

File details come from the government source that posted it. Updated .