SATPC0043158 Tab 07 2 SOW_Redacted.pdf

PDF 229 KB Posted

Attached to
Thin Wall Directed Energy Deposition JBK-75 Feature Builds and Material Qualification Samples
Solicitation number
80NSSC27948545Q
Issued by

About this file

This is a Statement of Work (SOW) for NASA's Marshall Space Flight Center (MSFC) requiring large-scale manufacturing technology demonstration using thin-wall Laser Powder Directed Energy Deposition (LP-DED) of JBK-75 and NASA HR-1 Fe-Ni alloys. The contractor must fabricate witness test specimens, subscale geometric feature builds, and material qualification samples representing the RS25 nozzle demonstrator. Key deliverables include JBK-75 nozzle manifolds, geometric feature builds, witness specimens (round bars and harvest boxes), and additional samples as coordinated with NASA. All samples must be delivered in as-built condition without heat treatment, accompanied by comprehensive build reports and inspection reports.

The contractor shall dedicate a large-scale 557 laser system for approximately 1,170 hours of machine time over 75 consecutive calendar days, providing engineering support (Tool Code generation, part design input, laser scan inspections), machine operators, all consumables (Argon nozzles, filters, inert gas), maintenance, and facility requirements including a minimum 60-inch diameter by 72-inch build chamber with integrated inert gas capability. The laser system must demonstrate capability to print parts with combined heights greater than 90 inches and diameters greater than 80 inches with 1-millimeter wall thickness. NASA will provide drawings, models, DED-sized JBK-75 powder, all heat treatments, and characterization and inspection. The machine cannot be utilized for other customers without NASA authorization, and NASA will pay the full machine time rate whether the equipment is running or idle. The Period of Performance is nine months from Authority to Proceed (ATP), with all deliverables shipped to Marshall Space Flight Center, Central Receiving, Building 4631, Huntsville, Alabama 35812.

View the file

On GovTribe

Work with this file

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file

Text version

Thin Wall Directed Energy Deposition JBK-75 Feature Builds and Material Qualification Samples Statement of Work (SOW)

NASA's Marshall Space Flight Center (MSFC) requires a large-scale manufacturing technology demonstration using thin-wall Laser Powder Directed Energy Deposition (DED). This effort aims to complete fabrication of subscale geometric feature builds, material property testing process qualification samples, and process characterization samples using JBK-75, NASA HR-1 and specialty alloys per NASA and industry specifications and representative process witness samples.

These samples are required to be identical to part fabrication for metallography and mechanical and thermophysical testing.

The SOW is as follows:

Task 1

1. The vendor shall fabricate a series of witness test specimens to evaluate the processing of JBK-75 and NASA HR-1 according to NASA specification using laser powder directed energy deposition (LP-DED). The witness coupon specimens shall include round bars and harvest boxes, or otherwise specified by NASA, and be fabricated using identical machine setup, parameters, and process setup as the RS25 nozzle demonstrator.

2. The vendor shall fabricate and provide engineering support for the LP-DED to complete all build samples with an approximate wall thickness of 1 mm and integral channels, with representative machine and parameters as the full-scale RS25 nozzle demonstrator.

3. The vendor shall prepare build plates to support sample builds.

4. The vendor shall review final models and refine the build approach for the JBK-75 thin-wall RS-25 nozzle demonstrator and representative build samples.

5. The vendor shall provide design inputs and develop detailed toolpath strategies for confirmation by NASA.

6. Vendor shall demonstrate LP-DED using a large scale machine platform for capability to print the aft end of a RS-25 nozzle with a combined height of greater than 90” height and greater than 80” diameter.

7. Vendor shall provide capability within laser system for 1 mm wall thickness at diameters stated in Task 1, requirement #6.

8. The material shall be JBK-75 Fe-Ni and NSA HR-1 Fe-Ni alloys per NASA requirements.

The use of virgin powder, 1x used, 2x, and 3x used is acceptable.

9. The print shall be performed within 75 consecutive days, or approximately 1170 hours of machine time shall include the following:

a. Engineering Support for a dedicated 557 laser system (includes Tool Code generation, part design input, laser scan inspections, reporting, etc.)

b. Provide operator for machine setup and deposition.

c. Provide consumables, such as Argon nozzles, filters, and all utilities required for operation.

d. Provide a build volume at a minimum of 60” dia by 72” for component builds.

e. Provide an inert gas chamber as part of the build to minimize oxidation. Provide all argon and consumables.

f. Provide tool code required to complete large format samples.

g. Provide all maintenance on the machine during the period of builds.

h. Provide operators necessary to operate the machine.

i. Shall include other required direct costs such as consumables and necessary replacement components (inert gas, build-nozzle components, filters, etc).

j. All engineering support should be included as part of the continuous-build machine capacity. This includes all tool path generation, inspections, trouble shooting of build failures, reporting, etc.

k. Shall include removal of parts from the build plate as required.

10. The vendor shall complete the following sample builds:

a. JBK-75 nozzle manifold

b. JBK-75 geometric feature builds

c. Witness Specimens using JBK-75 including round bars, harvest boxes.

d. Additional Samples as discussed with vendor and NASA.

i. Vendor will target to build the requested near net shape demo nozzle pieces and applicable coupons. Actual quantities may vary based on time available, and part/coupon priority changes along the way.

11. All JBK-75 representative qualification witness samples shall use identical parameters to the JBK-75 nozzle demonstrator and representative powder approved by NASA.

12. Part should be run on the same machine consecutively with acceptable breaks as needed for expected or unexpected shutdowns or pauses.

13. NASA shall provide drawings, models, and dimensions as required.

a. NASA will have required parts, models ready in advance so the tool code generation has adequate time to be completed, along with required planning for powder availability, base plates needed and machined, etc.

14. Vendor will not utilize the dedicated 557 machine for any other customers work unless receiving required authorization from NASA. Whether machine is running or sitting idle NASA will still pay for the machine time per pricing listed below.

15. NASA will provide all heat treatments and characterization and inspections as necessary.

16. NASA shall provide DED-sized powder, specifically JBK-75, for the builds.

17. The witness coupons shall be removed from the build plate, unless otherwise specified.

18. The witness coupons shall be delivered to NASA in the as-built condition without any heat treatments.

Shipping

1. Contractor shall ship all deliverables and process development samples to:

Marshall Space Flight Center Central Receiving, Bldg 4631

Huntsville, AL 35812

Period of Performance (POP)

• 9 months from authority to proceed (ATP)

Deliverables

1. Witness coupons in the as-built condition from task 10.

2. Build report for witness coupon samples and any inspection reports.

File details come from the government source that posted it. Updated .