SATPC0043084 Tab 04 4 SOW.pdf
PDF 45 KB Posted
- Attached to
- Fabrication of Beryllium Oxide Structures
- Solicitation number
- 80NSSC27947594Q
About this file
This is a Statement of Work for the fabrication of precision Beryllium Oxide (BeO) structures. The contractor shall fabricate structures from solid cylindrical BeO material with an outer diameter of 2.375±0.001 inches and a height of 2.25 inches. Each structure must include two through-holes positioned at opposite edges of the cylinder, equidistant from the center and aligned to within ±0.001 inch line of sight, with each hole measuring 0.255±0.005 inches in diameter. At the cylinder's center, a circular cavity measuring 0.4 inches in diameter and 0.24 inches deep must be fabricated, from which multiple blind and through holes extend with minimum dimensions of 0.020±0.001 inches.
Delivery of completed structures is required no later than 50 weeks from receipt of the purchase order. The government will consider sharing proprietary drawings with prospective vendors who can demonstrate fabrication capability based on the specifications provided in this Statement of Work. No pricing terms, response dates, award dates, set-asides, federal agencies, or contract vehicles are identified in this document.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| SATPC0043084 Tab 10 RFQ Open Market.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Statement of Work for the Fabrication of Structures in Beryllium Oxide (BeO)
There is a need to fabricate a structure in Beryllium Oxide (BeO) The specification for the structure in BeO is as follows:
The structure shall be fabricated from a solid cylindrical BeO.
The structure shall have an outer diameter of (2.375±0.001) in.
The structure height shall be 2.25 in.
Each structure shall have two through-holes, with one hole at one edge of the cylinder and the other hole at the opposite edge.
These two holes are equidistant to the center of the cylinder.
These two holes in each structure shall be aligned to within ±0.001 in line of sight.
The diameter of each hole shall be (0.255±0.005) in.
At the center of the cylinder shall be 0.4 in diameter and 0.24 in deep circular cavity.
From the base of circular cavity shall be:
Multiple blind holes.
Multiple through holes.
Minimum dimension of these holes shall be 0.020±0.001 in Delivery shall be no later than 50 weeks from receipt of purchase order.
Consideration to share proprietary drawing shall be given if prospective vendor can demonstrate the ability to fabricate the structure based on the specification provided above.
File details come from the government source that posted it. Updated .