- Attached to
- 4 Series Mixed Signal Oscilloscope
- Solicitation number
- 80NSSC27941006Q-1
About this file
This is a Statement of Work for the procurement of a Tektronix mixed-signal oscilloscope system for NASA Ames Research Center. NASA requires a mixed-signal oscilloscope with advanced capabilities to support embedded hardware bring-up, board-level debugging, and power and signal integrity analysis—functions not adequately supported by existing instrumentation. The agency needs simultaneous observation of analog signals, digital bus traffic, and current draw during transient events to diagnose intermittent faults, validate power rails, and verify timing margins.
The procurement specifies a Tektronix MSO44B 4-Series Mixed Signal Oscilloscope (Qty 1) with four FlexChannels, 31.25M record length, and 1-year warranty including Certificate of Traceable Calibration. Required accessories include the MSO44B 4-BW-1000 installed option providing 1 GHz bandwidth, 4-ULTIMATE-PER perpetual software license with node-locking, HC4 hard transit case, North America power cord, 5-year calibration data report, and four specialized probes: TLP058 8-channel logic probe, TICP100 1 GHz isolated current probe, TCP0030A AC/DC current probe (30 A DC to 120 MHz), TDP1000 differential probe (1 GHz, ±42 V), and TAP1500 active single-ended probe (1.5 GHz). The instrument must provide 1 GHz bandwidth on all four analog channels, minimum 31.25M points record length per channel, support 8-channel digital acquisition, full analysis software with advanced jitter/eye and power analysis capabilities, TekVPI probe interface standard, and five-year calibration service. Delivery shall occur at the earliest date available from the vendor, with the vendor providing the soonest achievable delivery date upon quotation and completing delivery within that timeframe after receipt of order. Warranty extends per manufacturer's standard terms from acceptance date. Delivery is to NASA Ames Research Center, Building N244, Lab 1, Moffett Field, California 94035-1000.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| tab 06 BNJ Redacted.pdf | ||
| Tab 10 RFQ 80NSSC27941006Q-1.pdf |
On GovTribe
Work with this file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Statement of Work
Oscilloscope
A. Background/History of Requirement:
NASA performs embedded hardware bring-up, board-level debug, and power and signal integrity analysis. This work requires simultaneous observation of analog signals, digital bus traffic, and current draw during transient events — capability not available with existing test equipment. Present instrumentation is not currently assigned, which is insufficient to resolve high-speed serial and clock signals or to correlate digital protocol activity with analog behavior. A mixed-signal oscilloscope with adequate bandwidth, deep record length, and a matched probe complement is required to diagnose intermittent faults, validate power rails, and verify timing margins.
B. Description of item(s) to be purchased:
Tektronix oscilloscope and accessories, as follows:
Qty 1 — MSO44B, 4 Series Mixed Signal Oscilloscope, four (4) FlexChannels, 31.25M record length, 1-year warranty, Certificate of Traceable Calibration
Qty 1 — MSO44B 4-BW-1000, installed option, 1 GHz bandwidth Qty 1 — 4-ULTIMATE-PER, Ultimate software bundle for 4 Series MSO, perpetual license, node locked Qty 1 — HC4, hard transit case with front cover Qty 1 — MSO44B A0, North America power cord Qty 1 — MSO44B D5, calibration data report, 5 years (requires Option C5) Qty 1 — TLP058, 8-channel general purpose logic probe with accessory kit Qty 1 — TICP100, 1 GHz isolated current probe Qty 1 — TCP0030A, AC/DC current probe, 30 A DC, DC to 120 MHz, TekVPI, with Certificate of
Traceable Calibration Qty 1 — TDP1000, differential probe, 1 GHz, 5X/50X, ±42 V, TekVPI Qty 1 — TAP1500, active single-ended probe, 1.5 GHz, 10X, TekVPI
C. Requirements Specifications:
The instrument and accessories shall meet or exceed the following:
Channels: Four (4) analog input channels, each configurable as analog or digital (FlexChannel or equivalent)
Bandwidth: 1 GHz on all analog channels, factory installed Record length: Minimum 31.25 M points per channel Digital acquisition: Support for a minimum 8-channel logic probe with accessory kit Analysis software: Full application bundle including advanced jitter/eye, power, and serial protocol analysis; perpetual, node-locked license
Probing: Isolated current measurement to 1 GHz; AC/DC current measurement to 30 A DC and 120 MHz; differential voltage to 1 GHz at ±42 V; single-ended active voltage to 1.5 GHz. All voltage/current probes shall use a common probe interface (TekVPI or equivalent) for automatic scaling and instrument-controlled configuration
Calibration: Certificate of Traceable Calibration at delivery; calibration data reports for a five (5) year period, with corresponding five-year calibration service
Power: North America line cord, 120 VAC Transport: Hard transit case with front cover, sized for the instrument
3. Period of Performance:
Delivery shall be at the earliest date available from the vendor. Vendor shall provide the soonest achievable delivery date with quotation, and delivery shall be completed within that quoted timeframe after receipt of order (ARO). Warranty per manufacturer's standard terms from date of acceptance.
4. Delivery Address:
NASA AMES RESEARCH CENTER
BUILDING N244, LAB 1
MOFFETT FIELD CA 94035-1000
File details come from the government source that posted it. Updated .