SATPC0043233 Tab 04 4 SOW.pdf

PDF 116 KB Posted

Attached to
Stock replenishment of valves for LH2 Pad B launch readiness.
Solicitation number
80NSSC26949068Q
Issued by

About this file

This is a Statement of Work for the procurement of spares to support launch readiness for the LH2 Pad B upgrade. The procurement requires two extended stem globe valves (OEM Part # ES60T1-08B) manufactured by Circle Seal. The valves must operate at 0-6000 PSI, feature 316 stainless steel body materials, have 1/2 inch female tube connections (MS33649), and be suitable for GH2/helium service media.

The seller must provide three quality certifications with each shipment: (1) QC03 Manufacturer's Certificate of Compliance documenting part numbers, quantity, manufacturing location, lot/heat/batch/date codes or serial numbers, and evidence of authorized distributor status if applicable; (2) QC07 Evidence of Test including inspection and test results such as operating loads, pressure ratings, and nondestructive testing reports; and (3) QC18 Pressure Vessel Requirements certification confirming compliance with ASME Boiler and Pressure Vessel Code Section VIII Division 1, Section XIII, ASME B31/B16 series standards, CGA requirements, or a 4:1 burst pressure safety factor. The place of performance is Pad B, LH2 Pad Upgrade at locations A629147 and A603428. The period of performance extends through Artemis III and all subsequent launches.

View the file

Other files

File Type Posted
SATPC0043233 Tab 10 Open Market RFQ.pdf PDF

On GovTribe

Work with this file

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file

Text version

STATEMENT OF WORK

1. Objective/Requirements This procurement is for spares to support launch readiness for LH2 Pad B upgrade.

2. Characteristics, Scope, and Specs

Quantity OEM Part # Product Description

2 ES60T1-08B VALVE, GLOBE, EXTENDED STEM

VALVE, GLOBE, EXTENDED STEM

P/N: ES60T1-08B

MFG: CIRCLE SEAL

DESCRIPTION: EXTENDED STEM GLOBE VALVE, OPERATING

PRESSURE: 0-6000 PSI, BODY MATERIALS, 316 STAINLESS STEEL,

CONNECTION SIZE: 1/2 INCH, FEMALE CONNECTIONS: TUBE (MS33649),

SERVICE MEDIA: GH2/HELIUM

Quality - QC03, QC07, QC18

QC03 Manufacturer’s Certificate of Compliance The Manufacturer shall provide a certification with each shipment to attest that the parts, assemblies, subassemblies, or detail parts conform to the Order requirements. When applicable, the true manufacturers, lot, heat, batch, date code, and/or serial number must appear on the certification.

Certification must contain the following:

• Part number / Specification

• Quantity

• Name and address of manufacturing or processing location

• Manufacturer’s lot, heat, batch, date code, and/or serial number (if applicable)

• Customer’s Order number when ordering directly from the manufacturer.

· If Authorized Distributor, include Authorized Distributor Name and Evidence from the OEM that seller is an Authorized Distributor – attached to Certificate.

QC07 Evidence of Test The Seller shall provide results of inspections and tests (e.g., nominal operating load or pressure, maximum proof load or pressure the hardware was subjected to, electrical resistance, continuity & nondestructive testing/reports) performed by the Seller in accordance with the Order and specification requirements.

QC18 Pressure Vessel Requirements With each shipment, the Seller shall provide a letter of certification, drawing, or cut sheet stating component meets one of the following (as applicable):

• ASME Boiler and Pressure Vessel Code Section VIII Div 1

• ASME Boiler and Pressure Vessel Code Section XIII

• ASME B31 series or ASME B16 series or CGA

• Burst Pressure Safety Factor of 4:1

3. Place of Performance Pad B, LH2 Pad Upgrade. A629147 & A603428 locations

4. Period of Performance Artemis III and beyond. (Every Launch)

File details come from the government source that posted it. Updated .