Tab 04 SOW Revised.pdf
PDF 119 KB Posted
- Attached to
- Mobile Tracking System (MTS) Federal contract opportunity
- Solicitation number
- 80NSSC26938034Q
About this file
This is a Statement of Work for the ACERO Project (Advanced Capabilities for Emergency Response Operations) detailing system components and performance requirements for procurement by Glenn Research Center.
The procurement includes six line items totaling one unit each: a refurbished MTS3.0 system with gimbal stabilized pan/tilt head, a refurbished parabolic dish with mounting hardware, an auto-heading add-on module, a dual polarization 2200-2500MHz antenna feed, a tripod, and a Silvus SC4200 Enhanced Plus Series wiring harness with mount. The system must meet strict operational requirements including field portability with individual component containers not exceeding 51 pounds (NIOSH recommended maximum for safe manual lifting), overall containerization limited to three-quarters of a standard quarter-ton pickup truck cargo bed capacity, and assembly completion by two personnel within 20 minutes using minimal vendor-provided tools. The antenna system must deliver minimum acceptable performance of 25 dBi with a target of 28 dBi; a 3 dBi reduction from target represents a 50% system performance reduction. Place of performance is Glenn Research Center with delivery required by September 30, 2026.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| Tab 10 RFQ 80NSSC26938034Q 2.pdf | ||
| Tab 04 SOW.pdf | ||
| Tab 10 RFQ 80NSSC26938034Q.pdf |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
STATEMENT OF WORK
1. Objective/Requirements
This system pertains to the ACERO Project: Advanced Capabilities for Emergency Response Operations. The information provided below is required to facilitate this purchase.
2. Characteristics, Scope, and Specs
LINE PART NO. DESCRIPTION QTY.
1 MTS3-GS-11-RFB Refurbished MTS3.0 with Gimbal Stabilized Pan/Tilt Head. 1 2 MTS3-DT-RFB One (1) Parabolic Dish (Refurbished) - Requires 1x Feed
Purchase. All Mounting Hardware Included.
3 MTS3-AH-11 Auto-Heading Add On for All MTS3.0 Models 1 4 MTS3-SD One (1) Dual Polarization 2200-2500MHz Antenna Feed for
MTS3-DT
5 MTS3-TP Tripod for All MTS3.0 Models 1 6 MTS516 Silvus SC4200 Enhanced Plus Series Wiring Harness and
Mount
Requirements:
o Field-portable system component containers must comply with materials handling standards, specifically for lifting containers off a pickup truck by two personnel in an outdoor or uneven environment. Lifting loads exceeding approximately 50 pounds increases the risk of injury. Under optimal conditions—such as the object being directly in front, without twisting, with a secure grip, and lifting between knuckle and shoulder height—the National Institute for Occupational Safety and Health (NIOSH) recommends a maximum weight limit of 51 pounds (23 kg) for a single individual.
o Containers shall not occupy more than three-quarters of the cargo bed of a standard quarter-ton pickup truck, which is capable of fitting a 4x8-foot sheet of plywood.
o System assembly shall be completed by two individuals within 20 minutes using minimal tools, which will be provided by the vendor.
o The minimum acceptable antenna system performance shall be 25 dBi, with a target of 28 dBi. A decrease of 3 dBi from the target represents a 50% reduction in system performance.
3. Place of Performance
Glenn Research Center
4. Period of Performance
Need by 9/30/2026
File details come from the government source that posted it. Updated .