SATPC0034661Tab 04 4 SOW.pdf
PDF 62 KB Posted
- Attached to
- Three axis load cells Federal contract opportunity
- Solicitation number
- 80NSSC24866078Q
About this file
The provided document is a Statement of Work (SOW) for four three-axis load cells required under Solicitation Number 80NSSC24866078Q issued by the National Aeronautics and Space Administration Shared Services Center. The SOW specifies the minimum technical requirements for the load cells, including a 40,000 lbf. load measurement capacity in the Z, X, and Y directions, 7,000 lbf-ft moment capacity in each direction, strain gauge-based design with full bridge completion, and 30 ft. connection cables. The load cells must fit an existing base plate with a square footprint of up to 6.5-in x 6.5-in and a square mounting bolt pattern with four threaded holes for M20 bolts on 4.5-inch centers.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| SATPC0034661 Tab 10 Open Market RFQ.pdf | ||
| SATPC0034661 Tab 10 Open Market RFQ.pdf | ||
| SATPC0034661Tab 04 4 SOW.pdf |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Statement of Work for Three Axis Load Cells
Please provide four load cells with the following minimum specifications:
1. 40,000 lbf. load measurement capacity in Z, X and Y directions
2. 7,000 lbf-ft moment capacity in each direction
3. Strain gauge-based load cell with full bridge completion
4. 30 ft. connection cables for each load cell
5. Four threaded holes on top and bottom of load cell for connections to a base plate and a measurement block
6. To fit to an existing base plate the load cells must have the following physical dimensions:
a. Square footprint measuring a maximum of 6.5-in x 6.5-in.
b. Square mounting bolt pattern. Four threaded holes for M20 bolts on 4.5-inch centers.
File details come from the government source that posted it. Updated .