Questions and Answers.pdf
PDF 299 KB Posted
- Attached to
- 4340 AMS6359 raw metal
- Solicitation number
- 80NSSC2325665Q
View the file
Other files
| File | Type | Posted |
|---|---|---|
| Q-2.pdf | ||
| Q-1C.pdf | ||
| RFQ 80NSSC2325665Q.pdf | ||
| Specs.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Questions/Answers
1. Is the stock dimension acceptable for thickness? NO, the material needs to be the specified thickness, width and length
2. What is the length and width tolerance? Our standard is -0.000 and +0.125 to +0.250. Which would you accept / prefer? -0.000 to +.125
3. The restriction forbidding plasma or weld cutting due to heat treat characteristics permits using a saw. Would water jet cutting also be acceptable? Yes, waterjet would work
4. Part 26901 did not state "Meet Standards: AMS-6359, ASTM-A829" as is on the other two. Does this requirement apply here also? Yes, they should be all the same standard.
5. Is the metal required to be DFARS compliant? Yes.
6. Are there any delivery requirements? (pallet weight limit, driver must unload, etc.) Will be delivered to a base; therefore, arrangements must be made prior.
7. Could material be cut with a water jet ? Yes, waterjet would work Also when does material need to be delivered ?ASAP
File details come from the government source that posted it. Updated .