80NSSC22799316Q - SOW.pdf

NASA Glenn Research Center Statement of Work for 24 Inch Vacuum Chamber Parts

10/23/17 sdm

A. Background

GRC is currently working to procure hardware to allow an existing vacuum chamber to keep running for tests.

B. Quality Assurance

100% Dimensional Inspection, Mill Test Reports and Certificates of Conformance are required for all materials and any Special Processes. Documentation shall be delivered with hardware.

C. Reference Documents (e.g. drawings, procedures, computer files, etc.)

Drawing Number Drawing Name Quantity DOR101 Door Machining 1 DOR101W Door Welding 1 DOR102 Tab 1 DOR103 Hinge 1 DOR104 Hinge Block 2 DOR105 Bolt Tab 2 DOR106 Hinge Pin 1 DOR107 Knob Bolt 2 DOR108 Knob Bolt Tab 2 DOR109 Knob Bolt Nut 2 DOR110 Stepped Washer 8

D. Government Furnished Equipment

None

E. Scope of Work to be Performed

Disciplines:

1) Machining

2) Welding/Metal Joining

3) Instrumentation

4) Materials

F. Environmental Impacts

None

NASA Glenn Research Center Statement of Work for 24 Inch Vacuum Chamber Parts

10/23/17 sdm

G. Inspections

100%-Dimensional Inspection for all dimensions shown on drawings, with documentation is required for all manufactured items. Documentation shall be delivered with hardware.

H. Milestones

Weekly progress reports are required. Parts are to be delivered in 8 weeks after receipt of order.

I. Deliverables

All hardware per provided drawings, full inspection report for all manufactured hardware, Mill Test Reports and Certificates of Conformance for all material.

J. Period-of-Performance

Parts are to be delivered in 8 weeks after receipt of order.

K. Non-Conforming Parts

Non-Conforming parts will be evaluated by NASA Glenn Research Center for possible rework or re-make or acceptance “as-is”. Parts determined to require rework or re-make will be reworked at the vendor’s expense, including shipping and handling from and to NASA Glenn Research Center.