80760 - PD_Redacted.pdf

PDF 292 KB Posted

Attached to
KT300D Piston Pumps
Solicitation number
Robins_AFB_KT300D_Piston_Pumps
Issued by

About this file

This is a Purchase Description for an urgent procurement of two (2) Kinney-Tuthill KT300D Piston Pumps (Part # KT300D-S000) to be delivered to the Commodities Maintenance Group (CMXG) at Warner Robins Air Force Base (Robins AFB) in Georgia. The contract requires delivery within twelve (12) weeks after award on an FOB Destination basis, with shipment to Building 321, 235 Robins Parkway, Station 15, Robins AFB, GA 31098-1621, attention Unit 402 MXSG/MXDPM. The contractor must provide a thirty (30) month manufacturer warranty for the equipment.

The purchase description establishes several compliance and operational requirements for the contractor. Security requirements include adherence to 32 CFR Part 117 (National Industrial Security Program Operating Manual), Department of the Air Force Instruction 31-101, Communications Security protocols, and Operations Security procedures per DoDD 5205.02E and AFI 10-701. Supply chain risk management procedures must comply with DoDI 5000.83, SAE Aerospace Standard AS5553D regarding counterfeit parts prevention, and NIST Special Publication 800-53 Rev 5 security controls. The contractor must implement the Agency Affirmative Procurement Program by providing estimates and verification of recovered materials for EPA-designated Comprehensive Procurement Guidelines products and bio-based product certifications where applicable. All invoices and receiving reports must be submitted through the Procurement Integrated Enterprise Environment (PIEE) via Wide Area Workflow (WAWF). Government representatives for this procurement are identified as units within 402 MXSG/MXDPM, with contact information for both primary and alternate representatives provided.

View the file

Other files

File Type Posted
80760 - Photos of MD Kinney Piston Pump.docx DOCX document

On GovTribe

Work with this file

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file

Text version

2.4 Incidental Services. None.

2.5 Warranty. The Contractor shall provide their thirty (30) month warranty (see attached manufacturer warranty).

2.6 Options. None.

3. Government Furnished Equipment and Services or Government Furnished Property

(GFP) and services. None.

4. General Information.

4.1 Security Requirements.

4.4.1 Government Security Regulations. The Contractor shall ensure personnel, information, system, facility, and international security requirements are met in accordance with 32 CFR Part 117, National Industrial Security Program Operating Manual (NISPOM), Department of the Air Force Instruction (DAFI) 31-101, Base Defense Operations.

4.4.2 Communications Security (COMSEC). The Contractor shall use only secure communications methods and/or equipment to transmit or otherwise transfer classified and/or sensitive, but unclassified, information in accordance with 32 CFR Part 117.21, National Industrial Security Program Operating Manual (NISPOM).

4.4.3 Operations Security (OPSEC). The purpose of OPSEC is to reduce the vulnerability of USAF missions to adversary collection and exploitation of critical information. The Contractor shall comply with DoDD 5205.02E “DoD Operations Security (OPSEC) Program”, DoD Manual 5205.02 “DoD Operations Security (OPSEC) Program Manual” and AFI 10-701 “Operations Security (OPSEC)” to protect United States (U.S. Government interest. The Contractor shall ensure compliance with OPSEC requirements including procedures to protect classified and/or sensitive, but unclassified, Government projects and/or programs. The Contractor shall ensure Contractor personnel who perform work at Robins AFB or another Government facility comply with the OPSEC procedures of the facility.

4.4.4 Security Incident or Violation. The Contractor shall immediately notify the

Government Security Office of any potential or actual security incidents or violations including potential or actual unauthorized disclosure or compromise of classified and/or sensitive, but unclassified, information.

4.2 Supply Chain Risk Management. The Contractor shall implement risk management procedures to ensure that system, equipment, components, software, maintenance equipment, and supplies do not incorporate counterfeit parts, malicious code, or other elements that would allow adversaries to gain access to data and critical program information and disrupt operations. Contractor risk management procedures shall comply with:

DoDI5000.83 DAFI 63-113, Program Protection Planning for Life Cycle

Management, SAE Aerospace Standard AS5553D, Counterfeit Electrical, Electronic, and

Electromechanical (EEE) Parts; Avoidance, Detection, Mitigation and Disposition, National Institute of Standards and Technology (NIST) Special Publication 800-53

Rev 5, Security and Privacy Controls for Information Systems and Organizations.

4.3 Agency Affirmative Procurement Program. In accordance with FAR 23.107-1 and FAR 23.107-2, 100% of purchases of Environmental Protection Agency (EPA)-designated products included in the Comprehensive Procurement Guidelines (CPG) list [https://www.epa.gov/smm/comprehensive-procurement-guideline-cpg-program] and/or United States Department of Agriculture (USDA)-designated products included in the bio based product listings [http://www.biopreferred.gov] shall, at a minimum, meet the EPA or USDA standards for recovered materials or bio based content, respectively, unless an item cannot be acquired competitively within a realistic timeframe, meet appropriate performance standards, and/or be acquired at a reasonable price.

4.3.1 The Contractor shall provide estimates and verification of recovered material for

EPA-designated CPG products and certification for both EPA-designated CPG products and USDA-designated bio based products. In accordance with the Robins Air Force Base, Georgia / Affirmative Procurement Program (formerly Green Procurement Program (GPP)) Plan, the Contractor shall provide estimates and certifications to the Government for completion of the applicable attachment(s) to be included in the Purchase Request (PR) package.

4.4 Inspection of Services/Inspection of Supply: In accordance with the Inspection of

Supply/Services clause(s) identified in the contract/order, the Government reserves the right to inspect Contractor performance.

4.5 Invoice/Payment and Receipt/Acceptance: In accordance with DFARS clause

252.232-7003, Electronic submission of Payment Requests and Receiving Reports, the Contractor shall submit/process payment requests (invoices, Receiving Reports or combos) and receipt/acceptance documents via Procurement Integrated Enterprise Environment (PIEE) through module Wide Area Workflow (WAWF). Access at the following site: https://piee.eb.mil/

5. Appendices.

5.1 Manufacturer warranty information

5.2 Photos of MD Kinney KT Rotary Piston Pump

File details come from the government source that posted it. Updated .