80150542 (SOW)1.docx

CQL-M

Statement of Work

PR: 80150542

1.0 Purpose: Preventative Maintenance for WV081

1.1 CHASSIS SERVICE

1.2 AUTOMATIC TRANSMISSION SERVICE

1.3 COMPLETE PUMP SERVICE

1.4 AERIAL SERVICE

1.5 FOAM SYSTEM SERVICE

1.6 CARWELL RUST INHIBITIVE TREA1MENT

1.7 UPGRADE LIGHT BAR FROM STROBE TO LED

2.0 Preventative Maintenance for WV081 Task The contractor shall:

2.1 CHASSIS SERVICE: This service includes changing engine oil and filters, fuel filters, coolant filters, grease and lube pump, chassis driveline, lube all doors and reels. 160-point inspection. Complete chassis inspection with reports. Brake adjustment, tire pressure checked and re-torque wheels. Test drive and post trip inspection.

2.2 AUTOMATIC TRANSMISSION SERVICE: Includes transmission filter and any oil lost during filter replacement

2.3 COMPLETE PUMP SERVICE: Inspect pump, valves, drains and inlet screens. Change transfer case fluid, adjust pump packing's, lubricate valves and levers, check oil level bearing lubrication (Hale Pump Only). Operate pump and recirculate at 150 psi and inspect pump packings for proper adjustment. Test system relief valve and/ or electronic vernier throttle. Inspect all gauges and fluid levels. Inspect Foam System.

2.4 AERIAL SERVICE: Service includes clean and lube slide-ways, guide pads, waterways and lift cables. Grease all pivot points and swing bearing. Clean and lube outriggers and manual hydraulic levers and overrides. Visual inspection, change hydraulic filters, check and top off aerial hydraulic fluid. Adjust guide pads and cables. Operate ladder to ensure proper operation of safety's and overrides

2.5 FOAM SYSTEM SERVICE: Change filter. Inspect and clean foam and water strainers. Check oil level and add if needed

2.6 CARWELL RUST INHIBITIVE TREA1MENT: Apply rust inhibitor along underside of chassis and cab

3.0 Purpose: Preventative Maintenance for WV082

3.1 CHASSIS SERVICE

3.2 AUTOMATIC TRANSMISSION SERVICE

3.3 COMPLETE PUMP SERVICE

3.4 AERIAL SERVICE

3.5 HYDRAULIC GENERATOR SERVICE

3.6 TAK-4 INSPECTION

3.7 CARWELL RUST INHIBITIVE TREA1MENT

4.0 Preventative Maintenance for WV082 Task. The Contractor shall:

4.1 Chassis Service: This service includes changing engine oil and filters, fuel filters, coolant filters, grease and lube pump, chassis driveline, lube all doors and reels. 160-point inspection. Complete chassis inspection with reports. Brake adjustment, tire pressure checked and re-torque wheels. Test drive and post trip inspection.

4.2 AUTOMATIC TRANSMISSION SERVICE: Includes transmission filter and any oil lost during filter replacement.

4.3 COMPLETE PUMP SERVICE: Inspect pump, valves, drains and inlet screens. Change transfer case fluid, adjust pump packing's, lubricate valves and levers, check oil level bearing lubrication (Hale Pump Only). Operate pump and recirculate at 150 psi and inspect pump packings for proper adjustment. Test system relief valve and/ or electronic vernier throttle. Inspect all gauges and fluid levels. Inspect foam system.

4.4 AERIAL SERVICE: Service includes clean and lube slide-ways, guide pads, waterways and lift cables. Grease all pivot points and swing bearing. Clean and lube outriggers and manual hydraulic levers and overrides. Visual inspection, change hydraulic filters, check and top off aerial hydraulic fluid. Adjust guide pads and cables.

4.5 HYDRAULIC GENERATOR SERVICE: Change oil and filter in hydraulic generator. Test & check operation

4.6 TAK-4 INSPECTION: Perform TAK-4 inspection per Pierce checklist.

4.7 CARWELL RUST INHIBITIVE TREA1MENT: Apply rust inhibitor along underside of chassis and cab