78302 Purchase Description.pdf

PURCHASE DESCRIPTION

C-5 Wing Cable Kits BPA-Call-Contract #-FA8571-21-A-0012

21 August 2025

1.0 DESCRIPTION. The Contractor shall provide all the tools, parts, materials, and labor required to provide two (2) C-5 wing cable kits for the 402d Aircraft Maintenance Group (AMXG) at Robins Air Force Base (AFB), Georgia.

1.1 The Contractor shall manufacture and deliver two (2) C-5 wing cable kits. C-5 Cable kits consist of the items listed below.

C-5 FALL RESTRAINT CABLES: DWG# X201211908

Nomenclature DWG # Quantity Per Kit

FWD FUSELAGE

CABLE X201211908-10 1

AFT FUSELAGE

CABLE X201211908-30 1

LEADING WING

CABLE X201211908-50 2

TRAILING WING

CABLE X201211908-70 2

C-5 ANCHOR FOR WING/FUSELAGE CABLES

Nomenclature DWG # Quantity Per Kit

ANCHOR FALL

RESTRAINT X201211928 27

*NOTE* 23 ea. Large Bolt 7/8, and 4 ea. Small Bolt 3/4

1.2 The Contactor shall provide the Government one Certificate of Conformance for each wing cable kit, to be submitted within shipment. (CDRL D001, Certificate of Compliance, DI-MISC-81356A/T)

2.0 Service Support. None

2.1 Delivery.

2.1.1 Government Representatives. The following individuals will serve as the Primary and Alternate Government Representatives as the points of contact through which all contractor-provided services will be requested and accomplished for AMXG.

Government Representatives will not supervise the Contractor, and they are not empowered to make any contractual commitments or to authorize any contractual changes on the Government’s behalf. The following individuals will serve as Government Representatives for AMXG.

2.2 Shipping/Delivery/Period of Performance. The Contractor shall deliver all the items FOB Destination within 20 weeks after contract award date.

2.3 Ship To Address:

Attention: Anthony Morley Unit: 402 AMXG/MXDE

DODAAC: FB2067

Address: 92 Phantom St

C5 PSC BLDG 125

Robins AFB, GA 31098

2.4 Incidental Services. None

2.5 Warranty. The Contractor shall provide a standard 12 Month Warranty covering all parts and labor.

2.6 Options. None

3.0 Government Furnished Equipment and Services or Government Furnished Property

(GFP) and services. None

4.0 General Information.

4.1 Security Requirements.

4.1.1 Government Security Regulations. The Contractor shall ensure personnel, information, system, facility, and international security requirements are met in accordance with 32 CFR Part 117, National Industrial Security Program Operating Manual (NISPOM), Department of the Air Force Instruction (DAFI) 31-101, Integrated Defense.

4.1.2 Communications Security (COMSEC). The Contractor shall use only secure communications methods and/or equipment to transmit or otherwise transfer classified and/or sensitive, but unclassified, information in accordance with 2 CFR Part 117, National Industrial Security Program Operating Manual (NISPOM).

Primary Government Representative Alternate Government Representative Name: Anthony Morley Name: Ben Beachboard Unit: 402 AMXG/MXDE Unit: 402 AMXG/MXDE Phone: 478-222-5516 Phone: 478-222-3696 Email: anthony.morley@us.af.mil Email: benvis.beachboard.1@us.af.mil

4.1.3 Operations Security (OPSEC). The purpose of OPSEC is to reduce the vulnerability of USAF missions to adversary collection and exploitation of critical information. The Contractor shall comply with DoDD 5205.02E “DoD Operations Security”, DoD Manual 5205.02-M and AFI 10-701 “Operations Security” to protect United States (U.S. Government interest. The Contractor shall ensure compliance with OPSEC requirements including procedures to protect classified and/or sensitive, but unclassified, Government projects and/or programs. The Contractor shall ensure Contractor personnel who perform work at Robins AFB or another Government facility comply with the OPSEC procedures of the facility.

4.1.4 Security Incident or Violation. The Contractor shall immediately notify the

Government Security Office of any potential or actual security incidents or violations including potential or actual unauthorized disclosure or compromise of classified and/or sensitive, but unclassified, information.

4.2 Supply Chain Risk Management. The Contractor shall implement risk management procedures to ensure that system, equipment, components, software, maintenance equipment, and supplies do not incorporate counterfeit parts, malicious code, or other elements that would allow adversaries to gain access to data and critical program information and disrupt operations. Contractor risk management procedures shall comply with:

DoDI5000.83 DAFI 63-113, Program Protection Planning for Life Cycle

Management, SAE Aerospace Standard AS5553D, Counterfeit Electrical, Electronic, and

Electromechanical (EEE) Parts; Avoidance, Detection, Mitigation and Disposition, National Institute of Standards and Technology (NIST) Special Publication 800-53

Rev 5, Security and Privacy Controls for Information Systems and Organizations.

4.3 Agency Affirmative Procurement Program. In accordance with FAR 23.404(b)(1), 100% of purchases of Environmental Protection Agency (EPA)-designated products included in the Comprehensive Procurement Guidelines (CPG) list [https://www.epa.gov/smm/comprehensive-procurement-guideline-cpg-program] and/or United States Department of Agriculture (USDA)-designated products included in the bio based product listings [http://www.biopreferred.gov] shall, at a minimum, meet the EPA or USDA standards for recovered materials or bio based content, respectively, unless an item cannot be acquired competitively within a realistic timeframe, meet appropriate performance standards, and/or be acquired at a reasonable price.

4.3.1 In accordance with FAR 23.107-1, the Contractor shall provide estimates and verification of recovered material for EPA-designated CPG products and certification for both EPA-designated CPG products and USDA-designated bio based products. In accordance with the Robins Air Force Base, Georgia / Affirmative Procurement Program (formerly Green Procurement Program (GPP)) Plan, the Contractor shall provide estimates and certifications to the Government for completion of the applicable attachment(s) to be included in the Purchase Request (PR) package.

http://www.biopreferred.gov/

4.4 Inspection of Services/Inspection of Supply: In accordance with the Inspection of Supply/Services clause(s) identified in the contract/order, the Government reserves the right to inspect Contractor performance.

4.5 Invoice/Payment and Receipt/Acceptance: In accordance with DFARS clause 252.232-7003, Electronic submission of Payment Requests and Receiving Reports, the Contractor shall submit/process payment requests (invoices, Receiving Reports or combos) and receipt/acceptance documents via Procurement Integrated Enterprise Environment (PIEE) through module Wide Area Workflow (WAWF). Access at the following site:

https://piee.eb.mil/

5.0 Appendices –

5.1 Drawing X201211928 (C-5 Anchor for Wing/Fuselage Cables)

5.1.1 Distribution Statement C: To obtain copies of bidset documents an interested vendor must be registered in the Joint Certification Program (JCP). Interested vendors are to request copies of the bidsets by providing their CAGE number to marci.ross.1@us.af.mil, and lasonia.anderson@us.af.mil to verify registration in JCP. Upon verification, bidset zip files will be sent via the "DOD Safe" website. To become registered in the JCP interested vendors can do so at the website located below."

https://www.dla.mil/Logistics-Operations/Services/JCP/

5.2 Drawing X201211908 (Cable System, Fall-Restraint Fuselage/Wingstand Installation C-5 Aircraft) https://piee.eb.mil/ mailto:marci.ross.1@us.af.mil mailto:lasonia.anderson@us.af.mil https://www.dla.mil/Logistics-Operations/Services/JCP/