Combined Attachments.pdf

STATEMENT OF WORK

(SOW)

GENERAL INFORMATION

Title of Project:

Service Agreement for Bruker BioSpin 9.4T MRI Scanner

Project Purpose or Objectives:

The NIDA IRP Neuroimaging Research Branch owns a Bruker Biospin 9.4T MRI scanner to perform imaging studies on preclinical models. Comprehensive preventative maintenance and service coverage for the Bruker Biospin 9.4T MRI scanner is needed. This is for full coverage and includes unlimited repair, labor and travel costs for service calls and full warranty coverage on all parts. The current agreement expires on December 31, 2023, and a contract is needed to maintain the Bruker Biospin 9.4T MRI scanner in operable condition.

The purpose of this acquisition is to acquire a service contract to support the operation of this scanner.

This service is required to ensure continued high-quality imaging performance of the scanner to support research in drug addiction.

Background Information:

The National Institutes of Health (NIH) is the nation’s leading medical research agency and the primary Federal agency whose mission is to seek fundamental knowledge about the nature and behavior of living systems and the application of that knowledge to enhance health, lengthen life, and reduce illness and disability, conducting, supporting and making medical discoveries that improve people’s health and save lives.

The Intramural Research Program (IRP) of the National Institute on Drug Abuse (NIDA) is located on the campus of Johns Hopkins Bayview Medical Center (JHBMC) in Baltimore, Maryland. The goal of the Neuroimaging Research Branch (NRB) of the NIDA IRP is to better understand the neurobiological mechanisms of drug addiction, the neural consequences of short and long-term drug use and the potential reversibility of these neuroadaptations. The major paradigm employed toward this goal is the development and application of novel neuroimaging tools, predominantly magnetic resonance imaging (MRI). Imaging studies in preclinical models of addiction is an important component of the program.

NIDA IRP requires a renewal to the preventative maintenance and service agreement for their Bruker Biospin 9.4T MRI scanner. NIDA requires a service agreement for a 12-month Base Period plus four (4) additional 12-month option periods. Without this contract in place, repair costs are extremely high and instrument downtime is much longer causing significant decrease in scientific productivity.

Period of Performance:

The required period of performance is one 12-month base year with four 12-month option periods:

• Base Year: January 1, 2024 – December 31, 2024

• Option Period 1: January 1, 2025 – December 31, 2025

• Option Period 2: January 1, 2026 – December 31, 2026

• Option Period 3: January 1, 2027 – December 31, 2027

• Option Period 4: January 1, 2028 – December 31, 2028

SCOPE OF WORK

This is a full-service contract which includes all repair parts, labor, and travel and two preventative maintenance visits per agreement year.

General Requirements:

The Contractor shall provide preventative maintenance (PM) and repair services for the Bruker BioSpin 9.4T MRI Scanner (Serial #10162634:). General Requirements include:

• instrument software revisions

• preventative maintenance inspections, including one (1) planned PM per year

• technical telephone consultation available during normal business hours

• unlimited on-site service visits when requested

The contractor is responsible for ensuring that the instrumentation remains operational and performs in accordance with its original equipment manufacturers operational specifications. The contractor shall provide all labor, material, and equipment to provide preventive maintenance and service for the government owned Bruker BioSpin 9.4T MRI Scanner.

Contractor shall schedule and perform onsite preventive maintenance from 8:00 am – 5:00 pm Monday through Friday, excluding Federal holidays.

Specific Requirements:

Due to the critical nature of the Bruker BioSpin 9.4T MRI Scanner, the Contractor shall ensure the following:

1. Maintenance and repair of the cryocooler, which includes:

• Monitoring the cryogen levels

• Refill the cryostat with liquid helium at intervals defined by the manufacturer’s recommendation

• Supply and refill cryogen as needed or requested

• Maintain customer transfer lines, cold head, secondary water-cooling system

2. Maintenance and repair services for all other parts of the equipment, which includes the following:

• The contractor must have either an adequate supply of parts in stock and readily available to the service technicians or be able to obtain any required part within 24 hours of the service technician assessment

• The service technicians shall be authorized Bruker Biospin trained technicians

• All service is to be warranted for at least 6 months and any replacement part must have at least a 12-month warranty

Contractor shall have access to proprietary parts and test instrumentation for effective repair in case of malfunction. Technical performance requirements include system coverage on the subject equipment by Original Equipment Manufacturer (OEM) factory-trained, authorized technicians and providers of any required parts and software or proprietary diagnostic software and software enhancements must be OEM certified (new or like-new) and compatible with the subject equipment.

Contractor shall be required to provide written progress reports in achieving this statement of work during the period of performance. The original documentation shall be provided by the vendor to show they completed service on the instrument and should document technical progress with the POC.

Service shall include labor and parts coverage, extended coverage hours, on-site labor response, technical telephone response (call-back to schedule), and planned maintenance, extended planned maintenance coverage hours, diagnostics software license and service documentation, customer engineer training, and preferred labor rate.

GOVERNMENT RESPONSIBILITIES

The government owns the scientific instrumentation.

1. The NIDA IRP staff will provide the contractor with all requested information during a service call.

2. The NIDA IRP staff will maintain the site and environment in a suitable condition for operation of the Covered Equipment.

3. The Government owns the scientific instrumentation. The field service technician will be required to notify the POC from NIDA IRP for access to the location below. The Government will provide Contractor personnel reasonable facility access to the systems for preventive maintenance, repair, and support services. Access will be restricted during federal holidays and after business hours. The Government will notify the Contractor of any needed service or calibration.

The unit is housed at NIDA-IRP, located at the Biomedical Research Center (BRC) at 251 Bayview Boulevard, Suite 200, Baltimore, Maryland 21224.

DELIVERY OR DELIVERABLES

Documentation shall be provided by the vendor to show they completed the preventive service on the equipment and left with the COR or POC. The service technician is to present a service ticket that briefly details the work performed during the service visit to the POC for signature and a copy of the ticket is to be left with the POC.

A detailed written report of any service and\or preventative maintenance is to be submitted to the Contracting Officer’s Representative, or a delegated entity, within 24 hours of service being performed.

TRAVEL

A representative will be required, as needed, to travel to the Biomedical Research Center (BRC) at 251 Bayview Boulevard, Suite 200, Baltimore, Maryland 21224, to perform repairs and maintenance as needed. All travel shall be included with the provided maintenance and service agreement quote.

KEY PERSONNEL

All personnel must be manufacturer-authorized technicians, factory trained by the original equipment manufacturer (OEM) for the Bruker BioSpin 9.4T MRI Scanner. All primary service personnel shall have at least one backup Field Service representative with at least the same level of expertise on the equipment covered by this contract.

OTHER CONSIDERATIONS

Confidentiality of Information:

The Contractor may not disclose any information they obtain which is designated by NIDA as confidential or proprietary. The Contractor will use reasonable efforts to protect against any such disclosure.

Contracting Officer’s Representative:

1. The following Contracting Officer's Representative (COR) will represent the Government for the purpose of this contract:

Name: Carolina Smith National Institute on Drug Abuse, Intramural Research Program Neuroimaging Research Branch 251 Bayview Boulevard Baltimore, MD 21224 Email: smithcaro@nida.nih.gov

2. The COR is responsible for: (1) monitoring the Contractor's technical progress, including the surveillance and assessment of performance and recommending to the Contracting Officer changes in requirements; (2) interpreting the statement of work and any other technical performance requirements; (3) performing technical evaluation as required; (4) performing technical inspections and acceptances required by this contract; and (5) assisting in the resolution of technical problems encountered during performance.

3. The Contracting Officer is the only person with authority to act as agent of the

Government under this contract. Only the Contracting Officer has authority to: (1) direct or negotiate any changes in the statement of work; (2) modify or extend the period of performance; (3) change the delivery schedule; (4) authorize reimbursement to the Contractor for any costs incurred during the performance of this contract; (5) otherwise change any terms and conditions of this contract; or (6) sign written licensing agreements. Any signed agreement shall be incorporated by reference in Section K of the contract.

4. The Government may unilaterally change the COR designation for this contract.

mailto:smithcaro@nida.nih.gov

FAR 52.212-4 Contract Terms and Conditions—Commercial Products and Commercial Services (NOV 2023)

(a) Inspection/Acceptance. The Contractor shall only tender for acceptance those items that conform to the requirements of this contract. The Government reserves the right to inspect or test any supplies or services that have been tendered for acceptance. The Government may require repair or replacement of nonconforming supplies or reperformance of nonconforming services at no increase in contract price. If repair/replacement or reperformance will not correct the defects or is not possible, the Government may seek an equitable price reduction or adequate consideration for acceptance of nonconforming supplies or services. The Government must exercise its post-acceptance rights-

(1) Within a reasonable time after the defect was discovered or should have been discovered;

and

(2) Before any substantial change occurs in the condition of the item, unless the change is due to the defect in the item.

(b) Assignment. The Contractor or its assignee may assign its rights to receive payment due as a result of performance of this contract to a bank, trust company, or other financing institution, including any Federal lending agency in accordance with the Assignment of Claims Act ( 31 U.S.C. 3727). However, when a third party makes payment (e.g., use of the Governmentwide commercial purchase card), the Contractor may not assign its rights to receive payment under this contract.

(c) Changes. Changes in the terms and conditions of this contract may be made only by written agreement of the parties.

(d) Disputes. This contract is subject to 41 U.S.C. chapter 71, Contract Disputes. Failure of the parties to this contract to reach agreement on any request for equitable adjustment, claim, appeal or action arising under or relating to this contract shall be a dispute to be resolved in accordance with the clause at Federal Acquisition Regulation (FAR) 52.233-1, Disputes, which is incorporated herein by reference. The Contractor shall proceed diligently with performance of this contract, pending final resolution of any dispute arising under the contract.

(e) Definitions. The clause at FAR 52.202-1, Definitions, is incorporated herein by reference.

(f) Excusable delays. The Contractor shall be liable for default unless nonperformance is caused by an occurrence beyond the reasonable control of the Contractor and without its fault or negligence such as, acts of God or the public enemy, acts of the Government in either its sovereign or contractual capacity, fires, floods, epidemics, quarantine restrictions, strikes, unusually severe weather, and delays of common carriers. The Contractor shall notify the Contracting Officer in writing as soon as it is reasonably possible after the commencement of any excusable delay, setting forth the full particulars in connection therewith, shall remedy such occurrence with all reasonable dispatch, and shall promptly give written notice to the Contracting Officer of the cessation of such occurrence.

(g) Invoice. (1) The Contractor shall submit an original invoice and three copies (or electronic invoice, if authorized) to the address designated in the contract to receive invoices. An invoice must include-

(i) Name and address of the Contractor;

(ii) Invoice date and number;

(iii) Contract number, line item number and, if applicable, the order number;

(iv) Description, quantity, unit of measure, unit price and extended price of the items delivered;

(v) Shipping number and date of shipment, including the bill of lading number and weight of shipment if shipped on Government bill of lading;

(vi) Terms of any discount for prompt payment offered;

(vii) Name and address of official to whom payment is to be sent;

(viii) Name, title, and phone number of person to notify in event of defective invoice; and

(ix) Taxpayer Identification Number (TIN). The Contractor shall include its TIN on the invoice only if required elsewhere in this contract.

(x) Electronic funds transfer (EFT) banking information.

(A) The Contractor shall include EFT banking information on the invoice only if required elsewhere in this contract.

(B) If EFT banking information is not required to be on the invoice, in order for the invoice to be a proper invoice, the Contractor shall have submitted correct EFT banking information in accordance with the applicable solicitation provision, contract clause (e.g., 52.232-33, Payment by Electronic Funds Transfer-System for Award Management, or 52.232-34, Payment by Electronic Funds Transfer-Other Than System for Award Management), or applicable agency procedures.

(C) EFT banking information is not required if the Government waived the requirement to pay by EFT.

(2) Invoices will be handled in accordance with the Prompt Payment Act ( 31 U.S.C.3903) and Office of Management and Budget (OMB) prompt payment regulations at 5 CFR Part 1315.

(h) Patent indemnity. The Contractor shall indemnify the Government and its officers, employees and agents against liability, including costs, for actual or alleged direct or contributory infringement of, or inducement to infringe, any United States or foreign patent, trademark or copyright, arising out of the performance of this contract, provided the Contractor is reasonably notified of such claims and proceedings.

(i) Payment.- (1) Items accepted. Payment shall be made for items accepted by the Government that have been delivered to the delivery destinations set forth in this contract.

(2) Prompt payment. The Government will make payment in accordance with the Prompt Payment Act ( 31 U.S.C.3903) and prompt payment regulations at 5 CFR Part 1315.

(3) Electronic Funds Transfer (EFT). If the Government makes payment by EFT, see 52.212-5(b) for the appropriate EFT clause.

(4) Discount. In connection with any discount offered for early payment, time shall be computed from the date of the invoice. For the purpose of computing the discount earned, payment shall be considered to have been made on the date which appears on the payment check or the specified payment date if an electronic funds transfer payment is made.

(5) Overpayments. If the Contractor becomes aware of a duplicate contract financing or invoice payment or that the Government has otherwise overpaid on a contract financing or invoice payment, the Contractor shall-

(i) Remit the overpayment amount to the payment office cited in the contract along with a description of the overpayment including the-

(A) Circumstances of the overpayment (e.g., duplicate payment, erroneous payment, liquidation errors, date(s) of overpayment);

(B) Affected contract number and delivery order number, if applicable;

(C) Affected line item or subline item, if applicable; and

(D) Contractor point of contact.

(ii) Provide a copy of the remittance and supporting documentation to the Contracting Officer.

(6) Interest. (i) All amounts that become payable by the Contractor to the Government under this contract shall bear simple interest from the date due until paid unless paid within 30 days of becoming due. The interest rate shall be the interest rate established by the Secretary of the Treasury as provided in 41 U.S.C. 7109, which is applicable to the period in which the amount becomes due, as provided in (i)(6)(v) of this clause, and then at the rate applicable for each six-month period as fixed by the Secretary until the amount is paid.

(ii) The Government may issue a demand for payment to the Contractor upon finding a debt is due under the contract.

(iii) Final decisions. The Contracting Officer will issue a final decision as required by 33.211 if–

(A) The Contracting Officer and the Contractor are unable to reach agreement on the existence or amount of a debt within 30 days;

(B) The Contractor fails to liquidate a debt previously demanded by the Contracting Officer within the timeline specified in the demand for payment unless the amounts were not repaid because the Contractor has requested an installment payment agreement; or

(C) The Contractor requests a deferment of collection on a debt previously demanded by the Contracting Officer (see 32.607-2).

(iv) If a demand for payment was previously issued for the debt, the demand for payment included in the final decision shall identify the same due date as the original demand for payment.

(v) Amounts shall be due at the earliest of the following dates:

(A) The date fixed under this contract.

(B) The date of the first written demand for payment, including any demand for payment resulting from a default termination.

(vi) The interest charge shall be computed for the actual number of calendar days involved beginning on the due date and ending on-

(A) The date on which the designated office receives payment from the Contractor;

(B) The date of issuance of a Government check to the Contractor from which an amount otherwise payable has been withheld as a credit against the contract debt; or

(C) The date on which an amount withheld and applied to the contract debt would otherwise have become payable to the Contractor.

(vii) The interest charge made under this clause may be reduced under the procedures prescribed in FAR 32.608-2 in effect on the date of this contract.

(j) Risk of loss. Unless the contract specifically provides otherwise, risk of loss or damage to the supplies provided under this contract shall remain with the Contractor until, and shall pass to the Government upon:

(1) Delivery of the supplies to a carrier, if transportation is f.o.b. origin; or

(2) Delivery of the supplies to the Government at the destination specified in the contract, if transportation is f.o.b. destination.

(k) Taxes. The contract price includes all applicable Federal, State, and local taxes and duties.

(l) Termination for the Government’s convenience. The Government reserves the right to terminate this contract, or any part hereof, for its sole convenience. In the event of such termination, the Contractor shall immediately stop all work hereunder and shall immediately cause any and all of its suppliers and subcontractors to cease work. Subject to the terms of this contract, the Contractor shall be paid a percentage of the contract price reflecting the percentage of the work performed prior to the notice of termination, plus reasonable charges the Contractor can demonstrate to the satisfaction of the Government using its standard record keeping system, have resulted from the termination. The Contractor shall not be required to comply with the cost accounting standards or contract cost principles for this purpose. This paragraph does not give the Government any right to audit the Contractor’s records. The Contractor shall not be paid for any work performed or costs incurred which reasonably could have been avoided.

(m) Termination for cause. The Government may terminate this contract, or any part hereof, for cause in the event of any default by the Contractor, or if the Contractor fails to comply with any contract terms and conditions, or fails to provide the Government, upon request, with adequate assurances of future performance. In the event of termination for cause, the Government shall not be liable to the Contractor for any amount for supplies or services not accepted, and the Contractor shall be liable to the Government for any and all rights and remedies provided by law. If it is determined that the Government improperly terminated this contract for default, such termination shall be deemed a termination for convenience.

(n) Title. Unless specified elsewhere in this contract, title to items furnished under this contract shall pass to the Government upon acceptance, regardless of when or where the Government takes physical possession.

(o) Warranty. The Contractor warrants and implies that the items delivered hereunder are merchantable and fit for use for the particular purpose described in this contract.

(p) Limitation of liability. Except as otherwise provided by an express warranty, the Contractor will not be liable to the Government for consequential damages resulting from any defect or deficiencies in accepted items.

(q) Other compliances. The Contractor shall comply with all applicable Federal, State and local laws, executive orders, rules and regulations applicable to its performance under this contract.

(r) Compliance with laws unique to Government contracts. The Contractor agrees to comply with 31 U.S.C. 1352 relating to limitations on the use of appropriated funds to influence certain Federal contracts; 18 U.S.C. 431 relating to officials not to benefit; 40 U.S.C. chapter 37, Contract Work Hours and Safety Standards; 41 U.S.C. chapter 87, Kickbacks; 49 U.S.C. 40118, Fly American; and 41 U.S.C. chapter 21 relating to procurement integrity.

(s) Order of precedence. Any inconsistencies in this solicitation or contract shall be resolved by giving precedence in the following order:

(1) The schedule of supplies/services.

(2) The Assignments, Disputes, Payments, Invoice, Other Compliances, Compliance with Laws Unique to Government Contracts, and Unauthorized Obligations paragraphs of this clause;

(3) The clause at 52.212-5.

(4) Addenda to this solicitation or contract, including any license agreements for computer software.

(5) Solicitation provisions if this is a solicitation.

(6) Other paragraphs of this clause.

(7) The Standard Form 1449.

(8) Other documents, exhibits, and attachments.

(9) The specification.

(t) [Reserved]

(u) Unauthorized Obligations. (1) Except as stated in paragraph (u)(2) of this clause, when any supply or service acquired under this contract is subject to any End User License Agreement (EULA), Terms of Service (TOS), or similar legal instrument or agreement, that includes any clause requiring the Government to indemnify the Contractor or any person or entity for damages, costs, fees, or any other loss or liability that would create an Anti-Deficiency Act violation (31 U.S.C. 1341), the following shall govern:

(i) Any such clause is unenforceable against the Government.

(ii) Neither the Government nor any Government authorized end user shall be deemed to have agreed to such clause by virtue of it appearing in the EULA, TOS, or similar legal instrument or agreement. If the EULA, TOS, or similar legal instrument or agreement is invoked through an "I agree" click box or other comparable mechanism (e.g., "click-wrap" or "browse-wrap" agreements), execution does not bind the Government or any Government authorized end user to such clause.

(iii) Any such clause is deemed to be stricken from the EULA, TOS, or similar legal instrument or agreement.

(2) Paragraph (u)(1) of this clause does not apply to indemnification by the Government that is expressly authorized by statute and specifically authorized under applicable agency regulations and procedures.

(v) Incorporation by reference. The Contractor’s representations and certifications, including those completed electronically via the System for Award Management (SAM), are incorporated by reference into the contract.

Addenda to FAR 52.212-4

FAR 52.242-15 Stop-Work Order (AUG 1989()

(a) The Contracting Officer may, at any time, by written order to the Contractor, require the Contractor to stop all, or any part, of the work called for by this contract for a period of 90 days after the order is delivered to the Contractor, and for any further period to which the parties may agree. The order shall be specifically identified as a stop-work order issued under this clause. Upon receipt of the order, the Contractor shall immediately comply with its terms and take all reasonable steps to minimize the incurrence of costs allocable to the work covered by the order during the period of work stoppage. Within a period of 90 days after a stop-work is delivered to the Contractor, or within any extension of that period to which the parties shall have agreed, the Contracting Officer shall either-

(1) Cancel the stop-work order; or

(2) Terminate the work covered by the order as provided in the Default, or the Termination for Convenience of the Government, clause of this contract.

(b) If a stop-work order issued under this clause is canceled or the period of the order or any extension thereof expires, the Contractor shall resume work. The Contracting Officer shall make an equitable adjustment in the delivery schedule or contract price, or both, and the contract shall be modified, in writing, accordingly, if-

(1) The stop-work order results in an increase in the time required for, or in the Contractor’s cost properly allocable to, the performance of any part of this contract; and

(2) The Contractor asserts its right to the adjustment within 30 days after the end of the period of work stoppage; provided, that, if the Contracting Officer decides the facts justify the action, the Contracting Officer may receive and act upon the claim submitted at any time before final payment under this contract.

(c) If a stop-work order is not canceled and the work covered by the order is terminated for the convenience of the Government, the Contracting Officer shall allow reasonable costs resulting from the stop-work order in arriving at the termination settlement.

(d) If a stop-work order is not canceled and the work covered by the order is terminated for default, the Contracting Officer shall allow, by equitable adjustment or otherwise, reasonable costs resulting from the stop-work order.

FAR 52.217-5 Evaluation of Options (JULY 1990)

Except when it is determined in accordance with FAR 17.206(b) not to be in the Government’s best interests, the Government will evaluate offers for award purposes by adding the total price for all options to the total price for the basic requirement. Evaluation of options will not obligate the Government to exercise the option(s).

FAR 52.217-8 Option to Extend Services (NOV 1999)

The Government may require continued performance of any services within the limits and at the rates specified in the contract. These rates may be adjusted only as a result of revisions to prevailing labor rates provided by the Secretary of Labor. The option provision may be exercised more than once, but the total extension of performance hereunder shall not exceed 6 months. The Contracting Officer may exercise the option by written notice to the Contractor within 15 calendar days before the contract expires.

FAR 52.217-9 Option to Extend the Term of the Contract (MAR 2000) https://www.acquisition.gov/far/part-17#FAR_17_206

(a) The Government may extend the term of this contract by written notice to the Contractor; provided that the Government gives the Contractor a preliminary written notice of its intent to extend at least 15 calendar days before the contract expires. The preliminary notice does not commit the Government to an extension.

(b) If the Government exercises this option, the extended contract shall be considered to include this option clause.

(c) The total duration of this contract, including the exercise of any options under this clause, shall not exceed five years.

52.212-5 CONTRACT TERMS AND CONDITIONS REQUIRED TO IMPLEMENT STATUTES OR

EXECUTIVE ORDERS—COMMERCIAL PRODUCTS AND COMMERCIAL SERVICES (SEP 2023)

[Contracting officer check as appropriate.] https://www.acquisition.gov/far/52.203-6 https://www.acquisition.gov/far/52.203-13 https://www.acquisition.gov/far/52.203-15 https://www.acquisition.gov/far/52.204-10 https://www.acquisition.gov/far/52.204-14 https://www.acquisition.gov/far/52.204-15 https://www.acquisition.gov/far/52.209-9 https://www.acquisition.gov/far/52.219-3 https://www.acquisition.gov/far/52.209-6 https://www.acquisition.gov/far/52.204-27 https://www.acquisition.gov/far/52.219-4 https://www.acquisition.gov/far/52.219-6 https://www.acquisition.gov/far/52.219-7 https://www.acquisition.gov/far/52.219-8 https://www.acquisition.gov/far/52.219-9 https://www.acquisition.gov/far/52.219-13 https://www.acquisition.gov/far/52.219-14 https://www.acquisition.gov/far/52.219-16 https://www.acquisition.gov/far/52.219-27 https://www.acquisition.gov/far/52.219-28 https://www.acquisition.gov/far/52.219-29 https://www.acquisition.gov/far/52.219-30 https://www.acquisition.gov/far/52.219-32 https://www.acquisition.gov/far/52.219-33 https://www.acquisition.gov/far/52.222-3 https://www.acquisition.gov/far/52.222-21 https://www.acquisition.gov/far/52.222-26 https://www.acquisition.gov/far/52.222-35 https://www.acquisition.gov/far/52.222-36 https://www.acquisition.gov/far/52.222-37 https://www.acquisition.gov/far/52.222-40 https://www.acquisition.gov/far/52.222-50 https://www.acquisition.gov/far/52.222-54 https://www.acquisition.gov/far/52.223-9 https://www.acquisition.gov/far/52.223-11 https://www.acquisition.gov/far/52.223-12 https://www.acquisition.gov/far/52.223-13 https://www.acquisition.gov/far/52.223-14 https://www.acquisition.gov/far/52.223-15 https://www.acquisition.gov/far/52.223-16 https://www.acquisition.gov/far/52.223-18 https://www.acquisition.gov/far/52.223-20 https://www.acquisition.gov/far/52.222-19 https://www.acquisition.gov/far/52.223-21 https://www.acquisition.gov/far/52.224-3 https://www.acquisition.gov/far/52.225-1 https://www.acquisition.gov/far/52.225-3 https://www.acquisition.gov/far/52.225-5 https://www.acquisition.gov/far/52.225-13 https://www.acquisition.gov/far/52.225-26 https://www.acquisition.gov/far/52.226-4 https://www.acquisition.gov/far/52.226-5 https://www.acquisition.gov/far/52.232-29 https://www.acquisition.gov/far/52.232-30 https://www.acquisition.gov/far/52.232-33 https://www.acquisition.gov/far/52.232-34 https://www.acquisition.gov/far/52.232-36 https://www.acquisition.gov/far/52.239-1 https://www.acquisition.gov/far/52.242-5 https://www.acquisition.gov/far/52.247-64 https://www.acquisition.gov/far/52.229-12 https://www.acquisition.gov/far/52.222-41 https://www.acquisition.gov/far/52.222-42 https://www.acquisition.gov/far/52.222-43 https://www.acquisition.gov/far/52.222-44 https://www.acquisition.gov/far/52.222-51 https://www.acquisition.gov/far/52.222-53 https://www.acquisition.gov/far/52.222-55 https://www.acquisition.gov/far/52.222-62 https://www.acquisition.gov/far/52.226-6

FAR 52.212-5 as of FAC 2023-05 (09/07/2023) Edited 09/12/2023

Revised:

The following clause is applicable to all Purchase Orders, Task or Delivery Orders, and Blanket Purchase Agreement (BPA) Orders/Calls: Prompt Payment (Jan 2017) FAR 52.232-25. Highlights of this clause and NIH implementation requirements follow:

A. An invoice is the Contractor's bill or written request for payment under the contract for supplies delivered or services performed. A proper invoice is an "Original" which must include the items listed in subdivisions 1 through 12, below, in addition to the requirements of FAR 32.9. If the invoice does not comply with these requirements, the Contractor will be notified of the defect within 7 days after the date the designated billing office received the invoice (3 days for meat, meat food products, or fish, and 5 days for perishable agricultural commodities, dairy products, edible fats or oils) with a statement of the reasons why it is not a proper invoice. (See exceptions under II., below.) Untimely notification will be taken into account in the computation of any interest penalty owed the Contractor.

1. Contractor: Name, Address, Point of Contact for the invoice (Name, title, telephone number, e-mail and mailing address of point of contact).

2. Remit-to address (Name and complete mailing address to send payment).

3. Remittance name must match exactly with name on original order/contract. If the Remittance name differs from the Legal Business Name, then both names must appear on the invoice.

4. Invoice date.

5. Unique invoice #s for all invoices per contractor regardless of site.

6. NBS document number formats must be included for awards created in the NBS: Contract Number;

Purchase Order Number; Task or Delivery Order Number and Source Award Number (e.g., Indefinite Delivery Contract number; General Services Administration number); or, BPA Call Number and BPA Parent Award Number.

7. Unique Entity Identifier (UEI) as registered in the System for Award Management (SAM).

8. Federal Taxpayer Identification Number (TIN). In those exceptional cases where a contractor does not have a DUNS number or TIN, a Vendor Identification Number (VIN) must be referenced on the award document.

9. Identify that payment is to be made using a three-way match.

10. Description of supplies/services the description on the award, by line billed.*

11. Freight or delivery charge must be billed as shown on the award. If it is included in the item price do not bill it separately. If identified in the award as a separate line item, it must be billed separately.

12. Quantity, Unit of Measure, Unit Price, Extended Price of supplies delivered or services performed, as applicable, and that the line items specified in the award.*

* NOTE: If your invoice must differ from the line items on the award, please contact the Contracting Officer before submitting the invoice. A modification to the order or contract may be needed before the invoice can be submitted and paid.

RFP 75N95023Q00050 Attachment 4

Shipping costs will be reimbursed only if authorized by the Contract/Purchase Order. If authorized, shipping costs must be itemized. Where shipping costs exceed $100, the invoice must be supported by a bill of lading or a paid carrier's receipt.

For inquiries regarding the status of invoices such as receipt of invoices, due date, request for payment of invoices, etc., contact NIH/OFM Customer Service via email at ofm_customer_service@incontactemail.com or via phone at 301-496-6088. To send your inquiries via other available communication methods see the NIH/OFM Customer Service website at https://ofm.od.nih.gov/Pages/Customer-Service.aspx.

The NIH/OFM Customer Service is open Eastern Standard Time Monday Friday from 8:30 a.m. to 5:00

m. and is closed between 12:00 p.m. to 1:00 p.m.

A. Except as indicated in paragraph B., below, the due date for making invoice payments by the designated payment office shall be the later of the following two events:

1. The 30th day after the designated billing office has received a proper invoice.

2. The 30th day after Government acceptance of supplies delivered or services performed.

B. The due date for making invoice payments for meat and meat food products, perishable agricultural commodities, dairy products, and edible fats or oils, shall be in accordance with the Prompt Payment Act, as amended.

A. An interest penalty shall be paid automatically, if payment is not made by the due date and the conditions listed below are met, if applicable.

1. A proper invoice was received by the designated billing office.

2. A receiving report or other Government documentation authorizing payment was processed and

Attachment 4RFP 75N95023Q00050 there was no disagreement over quantity, quality, or contractor compliance with a term or condition.

3. In the case of a final invoice for any balance of funds due the contractor for supplies delivered or services performed, the amount was not subject to further settlement actions between the Government and the Contractor.

B. Determination of interest and penalties due will be made in accordance with the provisions of the Prompt Payment Act, as amended, the Contract Disputes Act, and regulations issued by the Office of Management and Budget.

Upon receipt of accelerated payments from the Government, the Contractor shall make accelerated payments to its small business subcontractors under this contract, to the maximum extent practicable and prior to when such payment is otherwise required under the applicable contract or subcontract, after receipt of a proper invoice and all other required documentation from the small business subcontractor.

The acceleration of payments under this clause does not provide any new rights under the prompt Payment Act.

Include the substance of this clause, include this paragraph c, in all subcontracts with small business concerns, including subcontracts with small business concerns for the acquisition of commercial items.

Definitions. As used in this clause - Payment request means a bill, voucher, invoice, or request for contract financing payment with associated supporting documentation. The payment request must comply with the requirements identified in FAR 32.905(b), "Content of Invoices" and the applicable Payment clause included in this contract.

Except as provided in paragraph (c) of this clause, the Contractor shall submit payment requests electronically using the Department of Treasury Invoice Processing Platform (IPP) or successor system. Information regarding IPP, including IPP Customer Support contact information, is available at www.ipp.gov or any successor site.

The Contractor may submit payment requests using other than IPP only when the Contracting Officer authorizes alternate procedures in writing in accordance with HHS procedures.

If alternate payment procedures are authorized, the Contractor shall include a copy of the Contracting Officer's written authorization with each payment request.

Attachment 4RFP 75N95023Q00050

Attachment 4 - IPP Instructions

(1) 52.203-19, Prohibition on Requiring Certain Internal Confidentiality Agreements or Statements (Jan 2017) (section 743 of Division E, Title VII, of the Consolidated and Further Continuing Appropriations Act, 2015 (Pub. L. 113-235) and its successor provisions in subsequent appropriations acts (and as extended in continuing resolutions)).

(2) 52.204-23, Prohibition on Contracting for Hardware, Software, and Services Developed or Provided by Kaspersky Lab and Other Covered Entities (Nov 2021) (Section 1634 of Pub. L. 115-91).

(3) 52.204-25, Prohibition on Contracting for Certain Telecommunications and Video Surveillance Services or Equipment. (Nov 2021) (Section 889(a)(1)(A) of Pub. L. 115-232).

(4) 52.209-10, Prohibition on Contracting with Inverted Domestic Corporations (Nov 2015).

(5) 52.232-40, Providing Accelerated Payments to Small Business Subcontractors (Mar 2023) ( 31 U.S.C. 3903 and 10 U.S.C. 3801).

(6) 52.233-3, Protest After Award (Aug 1996) ( 31 U.S.C. 3553).

(7) 52.233-4, Applicable Law for Breach of Contract Claim (Oct 2004) (Public Laws 108-77 and 108-78 ( 19 U.S.C. 3805 note)).