70Z08022QPETREL.pdf

SOURCES SOUGHT NOTICE

DRYDOCK REPAIRS FOR USCGC PETREL (WPB-87350)

This SOURCES SOUGHT NOTICE is for market research purposes only and does not constitute a Request for Proposal or Quotation. It is not considered to be a commitment by the Government to award a contract nor will the Government pay for any information provided; no basis for claim against the Government shall arise as a result from a response to this Sources Sought Notice or Government use of any information provided.

Pursuant to FAR Part 10 (Market Research), the purpose of this notice is to:

(1) Determine if sources capable of satisfying the agency's requirements exists.

(2) Determine if commercial items suitable to meet the agency's needs are available or could be modified to meet the agency's requirements.

(3) Determine the commercial practices of company's engaged in providing the needed service or supply.

Pursuant to FAR Part 6 and FAR Part 19, competition and set-aside decisions may be based on the results of this market research. This notice in no way obligates the Government to any further action.

REQUIREMENT: This notice is issued by the U.S. Coast Guard, Surface Force Logistics Center Norfolk, VA to identify sources capable of providing the following:

DRYDOCK REPAIRS: Contractor shall provide a certified drydock facility, all necessary materials, equipment, and personnel to perform drydock repairs to USCGC PETREL (WPB-87350). This availability is subject to change at the discretion of the Government.

ANTICIPATED PERIOD OF PERFORMANCE: The period of performance is anticipated to be for sixty-three (63) calendar days with a start date of 22 February 2022 through 26 April 2022, (subject to change at the discretion of the Government). A firm-fixed price contract is anticipated for award.

NAICS CODE/SIZE STANDARD: The applicable NAICS Code is 336611, Ship Building and Repairing and the size standard is 1,250 employees.

SCOPE OF WORK: The scope of the acquisition is for drydock repairs for USCGC PETREL (WPB-87350). This work will include, but is not limited to the following WORK ITEMS (subject to change at the discretion of the Government):

WORK ITEM 1: Structural Analysis, 3D Laser Scan, Perform WORK ITEM 2: Hull Plating (Side Scan), Ultrasonic Testing WORK ITEM 3: Ultrasonic Thickness Measurements, Perform

WORK ITEM 4: U/W Body, Preserve (100%) WORK ITEM 5: Hull Plating Freeboard, Preserve, 100 Percent WORK ITEM 6: Tank, Dirty Oil, Clean and Inspect WORK ITEM 7: Tank, Oily Water, Clean and Inspect WORK ITEM 8: Tanks, MP Fuel Service, Clean and Inspect WORK ITEM 9: Decks, Exterior (Main Deck), Preserve WORK ITEM 10: Capastic Fairing, Depth Sounder, Renew WORK ITEM 11: Main Engine/Reduction Gear, Realign WORK ITEM 12: Intermediate Water-Lubricated Propulsion Shaft Bearings, Renew WORK ITEM 13: Aft Water-Lubricated Propulsion Shaft Bearings, Renew WORK ITEM 14: Intermediate Bearing Carriers, Renew WORK ITEM 15: Aft Bearing Carriers, Renew WORK ITEM 16: Stern Tube Interior Surfaces, Preserve, 100 Percent WORK ITEM 17: Propellers, Renew WORK ITEM 18: Fathometer Transducer, Renew WORK ITEM 19: Speed Log, Skin Valve, Renew WORK ITEM 20: Sea Water System, Perform Maintenance WORK ITEM 21: Rudder Assemblies, Renew WORK ITEM 22: RHIB Notch Skid Pad Stud(s), Renew WORK ITEM 23: Stern Launch Door, Remove, Inspect and Reinstall WORK ITEM 24: Cathodic Protection/Zinc Anodes, Renew WORK ITEM 25: Drydock WORK ITEM 26: Temporary Services, Provide - Cutter WORK ITEM 27: Sea Trial Performance, Support, Provide WORK ITEM 28: Soft Patches, Remove and Inspect WORK ITEM 29: Kickpipe, Renew WORK ITEM 30: Windows, Pilothouse, Renew WORK ITEM 31: Seawater Cooling Piping/Valves, Renew WORK ITEM 32: Critical Coated Surface(s), Preserve Partial WORK ITEM 33: Interior Deck Covering Systems, Renew WORK ITEM 34: Insulation, Renew WORK ITEM 35: Propulsion Shaft and Shaft Seals, Replace WORK ITEM 36: Stern Door Cross Connect Valves, Modify WORK ITEM 37: Fire Main Bleed Line, Modify WORK ITEM 38: Joiner Panel(s), Renew WORK ITEM 39: Ship Service Diesel Generator Sets (SSDG’s), Replace WORK ITEM 40: Hull Plating, RIB Notch, Renew WORK ITEM 41: RIB Notch Skid Pads, Renew

SUBMISSION OF INFORMATION: Companies having capabilities necessary to meet or exceed the stated requirements are invited to provide information to contribute to this market survey/sources sought notice including commercial market information and company information.

Companies may respond to this Sources Sought Notice via email to:

Mia.L.Speller@uscg.mil no later than 29 October 2021 at 16:00 EST.

Please provide the following information/documentation:

1. Name of Company, Address and DUNS Number.

2. Point of Contact and Phone Number.

3. Business Size applicable to the NAICS Code: 8(a) Small Business Concern, Hub Zone Small Business Concern, Service-Disabled Veteran Owned Small Business Concern (SDVOSBC) or a Small Business Concern.

4. Documentation Verifying Small Business Certification:

a. If claiming 8(a) status, provide a copy of your 8(a) Certificate from SBA.

b. If claiming Hub Zone status, provide a copy of your Hub Zone Certificate from SBA.

c. If claiming SDVOSBC status, provide documentation that shows the Service Disable Veteran (SDV) unconditionally owns 51 % of the business, controls the management and daily operations, and holds the highest officer position in the company. Documentation should also be provided to show that the SDV has a service-connected disability that has been determined by the Department of Defense or Department of Veteran Affairs. Finally, provide documentation that shows the business is small under the NAICS code 336611.

d. If claiming Small Business status, provide documentation to show the business is small under NAICS code 336611.

5. Statement for Proposal Submission: Evidence of experience in work similar in type and scope to include contract numbers, project titles, and dollar amounts, points of contact and telephone numbers. Brief statement on how your company will perform the work and confirmation that your company WILL submit a proposal as a prime contractor if a solicitation is issued as a result of this Sources Sought Notice.

6. Team Arrangements: Should you wish to use any type of contractor teaming arrangement, specifically a partnership or joint venture, you must provide a signed copy of the teaming arrangement.

7. Past Performance Information: Evidence of successful performance in work similar in type and scope within the last two years; include contract numbers, project titles, and dollar amounts, points of contact and telephone numbers.

For joint ventures, providing individual past performance documentation from each company on separate projects where the two did not work together is not considered to be sufficient past performance. A Joint Venture that cannot provide this requested information will not be considered to have sufficient documentation needed to evaluate past performance as an evaluation factor.

Interested parties: Need to be registered in the System for Award Management (SAM) which replaced the Central Contractor Registration (CCR) as prescribed in FAR Clause 52.232-33. SAM can be obtained by accessing the internet at www.sam.gov.

Failure to submit sufficient detailed information may result in considering a company as not a viable source and may influence competition and set-aside decisions. Regardless of the information obtained from this Sources Sought Notice, the Government reserves the right to consider any arrangement as deemed appropriated for this requirement.

Respondents are advised that the Government is under no obligation to acknowledge receipt of the information received or provide feedback to respondents with respect to any information submitted. No proprietary, classified, confidential, or sensitive information should be included in your response to this Sources Sought Notice. The Government reserves the right to use any information provided by respondents for any purpose deemed necessary and legally appropriate, including using technical information provided by respondents in any resultant solicitation.

After a review of the responses received from this notice, a pre-solicitation notice and solicitation may be published on Beta.Sam website. It is the potential offeror's responsibility to monitor the website for release of any future solicitation that may result from this Sources Sought Notice. However, responses to this Sources Sought Notice will not be considered adequate responses to any resultant solicitation.