SF30 00001 CGC PETREL DD.pdf

For the best experience, open this PDF portfolio in

Acrobat X or Adobe Reader X, or later.

Get Adobe Reader Now!

http://www.adobe.com/go/reader

CONTINUATION

70Z080-22-Q-PBPL0001

1. WI#31 – Seawater Cooling Piping/Valves, Renew: Can the Government provide any additional information regarding the exact locations of the pipe renewal.

Answer: as per the spec table 1: The flange Renew sea chest riser piping and flanges to include:

(2) 8” SCH 80 steel riser pipe/flange supplying port and starboard MDE seawater systems and (2) 3” SCH 80 steel riser pipe/flange supplying port and starboard SSDG seawater systems using Coast Guard Drawings 87 WPB 163-001 and 256-001 for guidance. Piping renewal as needed thru CFR/CR. (SEE PICS) for actual present condition of flanges and piping.

2. WI#32 – Critically coated surface preservation in the Lazarette bilge:Calls for Option 1 in the

6310 which calls for a plural paint system (spray) instead of two coats of epoxy. This is normal for new construction but more expensive than 2 coats of primer Amercoat 240 that we’ve usually done before. Can the Government clarify intent?

Answer: As it is a partial preservation; the Machinery Spaces: SSPC-SP 11 (1.0) hand tool preparation is the best option; roll on application of the coatings as per the std spec is our preferred application method. As per the coating product; as long as Amercoast 240 is IAW STD

SPEC 6310.

3. WI#33 – Interior Deck Covering Systems, Renew (carpeting) – Table 1 is very incomplete. Can the Government provide a complete Table 1? I.e. What color does the USCG want? Are we to renew the underlayment?

Answer: Agree; table is incomplete. No reports of failure underlayment during the planning cycle; it would be a CFR/CR as necessary as per the spec requirements. Color choice: DARK Blue IAW STD SPEC requirements.

4. WI#34 – Insulation renewal – Calls for new insulation renewal “under” (4) hatches. Aside from the FWD berthing hatch, the rest of the hatches themselves don’t show anything for insulation under the actual hatch on the drawing. See attached Sea Lion photos 196 & 132. Can the Government clarify intent? For example, is the intent to renew insulation of area *around* the hatches and the coamings?

Answer: Replace insulation per spec on the compartment interior side around the hatch framing (referencing SEA LION pics). No insulation required on the hatch lid for exterior hatch. (Reference pics for visual where work is needed).

5. WI#40 – RHIB notch plate renewal:Can the Government provide additional information on exact location of hull plate repair in RHIB Notch? Depending on location, price can vary immensely depending on interferences.

Answer: Using Coast Guard Drawings listed in Section 2 as reference, the Contractor shall crop and renew the forward vertical bulkhead inside the Rigid Inflatable Boat (RIB) notch, approximately 4 square feet (3ft x 1ft) of 3/16” hull plating. “The vertical plate just aft/below the RHIB Boat Winch platform.” Also, in reference to: the bulkhead aft of the switchboard in the engine room; where the rhib notch plate is located (don’t have any pics; just where the rhib boat’s nose matches up to the rhib notch plate).

Engine room hatch:

1-22-2 Access Hatch

Engine room escape hatch:

Forward lower berthing escape hatch:

Offers must acknowledge receipt of this amendment prior to the hour and date specified in the solicitation or as amended, by one of the following methods:

(a) By completing items 8 and 15, and returning or (c) By separate letter or electronic communication which includes a reference to the solicitation and amendment numbers. FAILURE OF YOUR ACKNOWLEDGMENT TO BE

RECEIVED AT THE PLACE DESIGNATED FOR THE RECEIPT OF OFFERS PRIOR TO THE HOUR AND DATE SPECIFIED MAY RESULT IN REJECTION OF YOUR OFFER. If by virtue of this amendment you desire to change an offer already submitted, such change may be made by letter or electronic communication, provided each letter or electronic communication makes reference to the solicitation and this amendment, and is received prior to the opening hour and date specified.

E. IMPORTANT: Contractor is not is required to sign this document and return copies to the issuing office.

AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT

1. CONTRACT ID CODE

2. AMENDMENT/MODIFICATION NUMBER 3. EFFECTIVE DATE 4. REQUISITION/PURCHASE REQUISITION NUMBER 5. PROJECT NUMBER (If applicable)

7. ADMINISTERED BY (If other than Item 6) CODE

STANDARD FORM 30 (REV. 11/2016)

Prescribed by GSA FAR (48 CFR) 53.243

FACILITY CODE

9A. AMENDMENT OF SOLICITATION NUMBER

9B. DATED (SEE ITEM 11)

10A. MODIFICATION OF CONTRACT/ORDER NUMBER

10B. DATED (SEE ITEM 13)

11. THIS ITEM ONLY APPLIES TO AMENDMENTS OF SOLICITATIONS

The above numbered solicitation is amended as set forth in Item 14. The hour and date specified for receipt of Offers is extended. is not extended.

12. ACCOUNTING AND APPROPRIATION DATA (If required) copies of the amendment; (b) By acknowledging receipt of this amendment on each copy of the offer submitted;

13. THIS ITEM APPLIES ONLY TO MODIFICATIONS OF CONTRACTS/ORDERS.

IT MODIFIES THE CONTRACT/ORDER NUMBER AS DESCRIBED IN ITEM 14.

CHECK ONE A. THIS CHANGE ORDER IS ISSUED PURSUANT TO: (Specify authority) THE CHANGES SET FORTH IN ITEM 14 ARE MADE IN THE CONTRACT ORDER

NUMBER IN ITEM 10A.

B. THE ABOVE NUMBERED CONTRACT/ORDER IS MODIFIED TO REFLECT THE ADMINISTRATIVE CHANGES (such as changes in paying office, appropriation data, etc.) SET FORTH IN ITEM 14, PURSUANT TO THE AUTHORITY OF FAR 43.103(b).

C. THIS SUPPLEMENTAL AGREEMENT IS ENTERED INTO PURSUANT TO AUTHORITY OF:

D. OTHER (Specify type of modification and authority)

Except as provided herein, all terms and conditions of the document referenced in Item 9A or 10A, as heretofore changed, remains unchanged and in full force and effect.

15C. DATE SIGNED

15A. NAME AND TITLE OF SIGNER (Type or print)

16C. DATE SIGNED

16A. NAME AND TITLE OF CONTRACTING OFFICER (Type or print)

14. DESCRIPTION OF AMENDMENT/MODIFICATION (Organized by UCF section headings, including solicitation/contract subject matter where feasible.)

PAGE OF PAGES

6. ISSUED BY CODE

8. NAME AND ADDRESS OF CONTRACTOR (Number, street, county, State and ZIP Code) (X)

CODE

15B. CONTRACTOR/OFFEROR

(Signature of person authorized to sign)

16B. UNITED STATES OF AMERICA

(Signature of Contracting Officer)

Previous edition unusable

00001 52A80

Jillian Noblett

USCGC PETREL FY22 DD Amendment to Solicitation 70Z08022QPBPL0001 is as follows:

1. This amendment is issued in response to contractor(s) request for questions. Please see pages 2-5.

2. All terms and conditions remain the same.

52A80

Commanding Officer

USCG SFLC 80

300 East Main Street Suite 600 0001 Norfolk, VA 23510 52000PR220013392

Commanding Officer

USCG SFLC 80

300 East Main Street Suite 600 Norfolk, VA 23510

52000PR220013392

70Z08022QPBPL0001

1 5

02/24/2022

02/08/2022