ATTACHMENT 1-Schedule of Supplies and Pricing 2020 PBPL Parts Manufacture.xls
XLS spreadsheet 140 KB Posted
- Attached to
- 87' & 110' Patrol Boat Parts Manufacture
- Solicitation number
- 70Z08020Q17002B00
View the file
Other files
| File | Type | Posted |
|---|---|---|
| ATTACHMENT 3 - PACKAGING_REQUIREMENTS 70Z08020Q17002B00.docx | DOCX document |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Year 1
| CLIN | FSC | NIIN | P/N | DESCRIPTION | EST. Annual QTY | UNIT PRICE | TOTAL PRICE |
| 0001 | 2990 | 01-460-0214 | 110WPB259-005 ASSY D | Flange Exhaust Pipe 18" | 001 | $ - 0 | $ - 0 |
| General - 18" Lower Companion Pipe Flange manufactured in accordance with drawing 110WPB 259-005 Rev. C Dated 1/14/02 Assembly D. | |||||||
| Material Certification: Contractor shall provide certifications of material conformance to the Coast Guard QA Representative. | |||||||
| Flange Sealing Surfaces: All flanged sealing surfaces shall be machined to obtain a spiral serrated gasket surface finish (phonographic finish). As a general rule, a 1/16" radius round-nosed tool at a feed of 1/32" for flanges 12" diameter and smaller. Sizes larger than 12" diameter an 1/16” radius round-nosed tool at a feed of 0.050” for flanges over 12” diameter shall be used. | |||||||
| Welder Qualification – All welding if necessary shall be in accordance with Surface Forces Logistics Center Standard Specification 0740 (SFLC Std Spec 0740), 2012, Welding and Allied Processes. | |||||||
| Notifications & Inspections – The contractor shall be responsible for notifying the Contracting Officer no less then ten (10) calendar days prior to the contractor being ready for any Quality Assurance (Q.A.) inspections or testing required herein. Thirty (30) calendar days shall be allowed should the contract be awarded to a foreign contractor. | |||||||
| Inspections & Tests – The inspections & tests required herein are the minimum necessary and are not intended to replace any controls, examinations, or tests normally employed by the contractor to assure the quality of the product. The following will be witnessed by a CG Quality Assurance Representative: a) Material Certifications as required upon request by the Coast Guard Quality Assurance Representative. b) Conformance to dimensional tolerances, surface texture and overall workmanship requirements. c) Overall assembly completeness as required by this statement of work and the drawing. d) Inspection of packaging and marking. | |||||||
| Preservation, Packaging and Marking – Each item shall be individually preserved and packaged as appropriate in accordance with MIL-STD-2073-1E Method 10, cushioned or secured to prevent movement or damage from external impact. Each item shall then be packed in an appropriately sized ASTM-D6251 Type III, Class 1 Wood-Cleated Panelboard Shipping Box or ASTM-D6880 Class 2 Heavy Duty screwed Wooden Box. Each package shall be Marked IAW MIL-STD-129R. | |||||||
| Bar Coding – Each Flange shall be bar coded IAW ISO/IEC-16388-2007, Code 39 Symbology. The Bar Code Label can be applied separately or as part of the marking listed above. | |||||||
| Calibration System – The Contractor shall be required to maintain a test equipment calibration program in compliance with NCSL Z540-3. The program shall be documented and traceable to the National Institute of Standards (NIST). The calibration system records shall be maintained for inspection for the duration of any contract referencing this item. | |||||||
| CLIN | FSC | NIIN | P/N | DESCRIPTION | EST. Annual QTY | UNIT PRICE | TOTAL PRICE |
| 0002 | 2990 | 01-475-9800 | 110WPB259-006 ASSY A | Flange, Exhaust Pipe 8" | 001 | $ - 0 | $ - 0 |
| General - 8" Companion Pipe Flange manufactured in accordance with drawing 110WPB 259-006 Rev. D Dated 3/25/09 Assembly A. | |||||||
| Material Certification: Contractor shall provide certifications of material conformance to the Coast Guard QA Representative. | |||||||
| Flange Sealing Surfaces: All flanged sealing surfaces shall be machined to obtain a spiral serrated gasket surface finish (phonographic finish). As a general rule, a 1/16" radius round-nosed tool at a feed of 1/32" for flanges 12" diameter and smaller. Sizes larger than 12" diameter an 1/16” radius round-nosed tool at a feed of 0.050” for flanges over 12” diameter shall be used. | |||||||
| Welder Qualification – All welding if necessary shall be in accordance with Surface Forces Logistics Center Standard Specification 0740 (SFLC Std Spec 0740), 2012, Welding and Allied Processes. | |||||||
| Notifications & Inspections – The contractor shall be responsible for notifying the Contracting Officer no less then ten (10) calendar days prior to the contractor being ready for any Quality Assurance (Q.A.) inspections or testing required herein. Thirty (30) calendar days shall be allowed should the contract be awarded to a foreign contractor. | |||||||
| Inspections & Tests – The inspections & tests required herein are the minimum necessary and are not intended to replace any controls, examinations, or tests normally employed by the contractor to assure the quality of the product. The following will be witnessed by a CG Quality Assurance Representative: a) Material Certifications are required upon request by the Coast Guard Quality Assurance Representative. b) Conformance to dimensional tolerances, surface texture and overall workmanship requirements. c) Overall assembly completeness as required by this statement of work and the drawing. d) Inspection of packaging and marking. | |||||||
| Preservation, Packaging and Marking – Each item shall be individually preserved and packaged as appropriate in accordance with MIL-STD-2073-1E Method 10, cushioned or secured to prevent movement or damage from external impact. Each item shall then be packed in an appropriately sized ASTM-D6251 Type III, Class 1 Wood-Cleated Panelboard Shipping Box or ASTM-D6880 Class 2 Heavy Duty screwed Wooden Box. Each package shall be Marked IAW MIL-STD-129R. | |||||||
| Bar Coding – Each Flange shall be bar coded IAW ISO/IEC-16388-2007, Code 39 Symbology. The Bar Code Label can be applied separately or as part of the marking listed above. | |||||||
| Calibration System – The Contractor shall be required to maintain a test equipment calibration program in compliance with NCSL Z540-3. The program shall be documented and traceable to the National Institute of Standards (NIST). The calibration system records shall be maintained for inspection for the duration of any contract referencing this item. | |||||||
| CLIN | FSC | NIIN | P/N | DESCRIPTION | EST. Annual QTY | UNIT PRICE | TOTAL PRICE |
| 0003 | 2990 | 01-460-0205 | 110WPB259-005 ASSY A | Flange Exhaust Pipe 18" | 001 | $ - 0 | $ - 0 |
| General – Manufactured in accordance with drawing 110WPB 259-005 Rev. C Dated 1/14/02 Assembly D. | |||||||
| Material Certification: Contractor shall provide certifications of material conformance to the Coast Guard QA Representative. | |||||||
| Flange Sealing Surfaces: All flanged sealing surfaces shall be machined to obtain a spiral serrated gasket surface finish (phonographic finish). As a general rule, a 1/16" radius round-nosed tool at a feed of 1/32" for flanges 12" diameter and smaller. Sizes larger than 12" diameter an 1/16” radius round-nosed tool at a feed of 0.050” for flanges over 12” diameter shall be used. | |||||||
| Welder Qualification – All welding if necessary shall be in accordance with Surface Forces Logistics Center Standard Specification 0740 (SFLC Std Spec 0740), 2012, Welding and Allied Processes. | |||||||
| Notifications & Inspections – The contractor shall be responsible for notifying the Contracting Officer no less then ten (10) calendar days prior to the contractor being ready for any Quality Assurance (Q.A.) inspections or testing required herein. Thirty (30) calendar days shall be allowed should the contract be awarded to a foreign contractor. | |||||||
| Inspections & Tests – The inspections & tests required herein are the minimum necessary and are not intended to replace any controls, examinations, or tests normally employed by the contractor to assure the quality of the product. The following will be witnessed by a CG Quality Assurance Representative: a) Material Certifications as required upon request by the Coast Guard Quality Assurance Representative. b) Conformance to dimensional tolerances, surface texture and overall workmanship requirements. c) Overall assembly completeness as required by this statement of work and the drawing. d) Inspection of packaging and marking. | |||||||
| Preservation, Packaging and Marking – Each item shall be individually preserved and packaged as appropriate in accordance with MIL-STD-2073-1E Method 10, cushioned or secured to prevent movement or damage from external impact. Each item shall then be packed in an appropriately sized ASTM-D6251 Type III, Class 1 Wood-Cleated Panelboard Shipping Box or ASTM-D6880 Class 2 Heavy Duty screwed Wooden Box. Each package shall be Marked IAW MIL-STD-129R. | |||||||
| Bar Coding – Each Flange shall be bar coded IAW ISO/IEC-16388-2007, Code 39 Symbology. The Bar Code Label can be applied separately or as part of the marking listed above. | |||||||
| Calibration System – The Contractor shall be required to maintain a test equipment calibration program in compliance with NCSL Z540-3. The program shall be documented and traceable to the National Institute of Standards (NIST). The calibration system records shall be maintained for inspection for the duration of any contract referencing this item. | |||||||
| CLIN | FSC | NIIN | P/N | DESCRIPTION | EST. Annual QTY | UNIT PRICE | TOTAL PRICE |
| 0004 | 4810 | 01-475-7855 | 110CWPB259-003-S | Valve, Flapper Assembly | 001 | $ - 0 | $ - 0 |
| Butterfly Type Exhaust (Flapper) Valve, Complete Assembly, 18" Diameter, with electric actuator, Companion Flanges, Gaskets and solenoid limit (open/close) switches. Manufactured in accordance with Coast Guard drawing 110C WPB 259-003 Rev. E Dated 5/06/2004 and Work Item 1: 4810-01-475-7855, 18" Exhaust Flapper Valve, Purchase, dated 03/19. For Starboard side application. Encompasses Assemblies A, B, C, D, J, K and M per General Note 13 on drawing. | |||||||
| CLIN | FSC | NIIN | P/N | DESCRIPTION | EST. Annual QTY | UNIT PRICE | TOTAL PRICE |
| 0005 | 4810 | 01-475-8271 | 110CWPB259-003-P | Flapper Valve Assembly | 001 | $ - 0 | $ - 0 |
| Butterfly Type Exhaust (Flapper) Valve, Complete Assembly 18" Diameter, with electric actuatorCompanion Flanges, Gaskets and solenoid limit (open/close) switches. Manufactured in accordance with Coast Guard drawing 110C WPB 259-003 Rev. E Dated 5/06/2004 and Work Item 1: 4810-01-475-8271, 18" Exhaust Flapper Valve, Purchase, dated 03/19. For Port side application. Encompasses assemblies A, B, C, D, H, K and M per General Note 13 on drawing. | |||||||
| CLIN | FSC | NIIN | P/N | DESCRIPTION | EST. Annual QTY | UNIT PRICE | TOTAL PRICE |
| 0006 | 4320 | 01-475-8280 | 110WPB259-003 ASSEMBLY H | Valve, Flapper | 001 | $ - 0 | $ - 0 |
| Butterfly valve and spray ring sub-assembly for port side application on Coast Guard 110' WPB Class cutters. Manufactured, packaged, packed and marked in accordance with Coast Guard drawing 110CWPB 259-003 Rev. E Dated 5/06/2004, assembly "H" and Work Item 1: 4320-01-475-8280 18" Exhaust Flapper Valve, Purchase, dated 03/19. Includes assemblies "B", "C" AND "H" in accordance with general note 14 on drawing. | |||||||
| CLIN | FSC | NIIN | P/N | DESCRIPTION | EST. Annual QTY | UNIT PRICE | TOTAL PRICE |
| 0007 | 4320 | 01-475-7884 | 110WPB259-003 ASSEMBLY J | Valve, Flapper | 001 | $ - 0 | $ - 0 |
| Butterfly valve and spray ring sub-assembly for starboard side application on Coast Guard 110' WPB Class cutters. Manufactured in accordance with Coast Guard drawing 110CWPB 259-003 Rev. E, Dated 5/06/2004 and Work Item 1: 4320-01-475-7884,18" Exhaust Flapper Valve, Purchase, dated 03/19. Includes assemblies "B", "C" AND "J" in accordance with general note 14 on drawing. | |||||||
| CLIN | FSC | NIIN | P/N | DESCRIPTION | EST. Annual QTY | UNIT PRICE | TOTAL PRICE |
| 0008 | 3130 | 01-442-2863 | 5686719 | Housing, Bearing Unit, FWD | 004 | $ - 0 | $ - 0 |
| Manufacture, Inspect, Package and Mark Bearing Housing IAW attached Work Item1: 3130-01-442-2863, Forward Bearing Housing, Purchase, dated 02/19. Final assembly shall include items 2, 8, 9 and 26 IAW drawing 110CWPB-161-005 Rev. G Dated 03/08/2014. | |||||||
| CLIN | FSC | NIIN | P/N | DESCRIPTION | EST. Annual QTY | UNIT PRICE | TOTAL PRICE |
| 0009 | 2040 | 01-486-7595 | 110WPB-513-005 | Ventillator, Air Circulation | 001 | $ - 0 | $ - 0 |
| Lever operated louvered vent that opens and closes. Manufactured IAW Coast Guard drawing 110 WPB-513-005 Rev. C dated 1/14/2002 and Work Item 1: 2040-01-486-7595, Louvered Inlet Vents, Purchase dated 02/19. | |||||||
| CLIN | FSC | NIIN | P/N | DESCRIPTION | EST. Annual QTY | UNIT PRICE | TOTAL PRICE |
| 0010 | 2990 | 01-475-9354 | 110WPB259-005-S | Exhaust System, Engine | 1 | $ - 0 | $ - 0 |
| Starboard 18” Spray Ring Complete Assembly with Companion Flanges and Gaskets. Manufactured in accordance with Work Item: 2990-01-475-9354, 18" Exhaust Spray Rings, Purchase dated 02/19 and Coast Guard drawing 110WPB 259-005 Rev. C 1/14/2002. In accordance with Note 9 assembly shall include assemblies A, B, C, D and J. | |||||||
| CLIN | FSC | NIIN | P/N | DESCRIPTION | EST. Annual QTY | UNIT PRICE | TOTAL PRICE |
| 0011 | 2990 | 01-475-9360 | 110WPB259-005-P | Exhaust System, Engine | 001 | $ - 0 | $ - 0 |
| Port 18” Spray Ring Complete Assembly with Companion Flanges and Gakets. Manufactured in accordance with Work Item: 2990-01-475-9360, 1 Exhaust Spray Rings, Purchase, dated 02/19 and Coast Guard drawing 110WPB 259-005 Rev C dated 1/14/2002. In accordance with Note 9 assembly shall include assemblies A, B, C, D and H. | |||||||
| CLIN | FSC | NIIN | P/N | DESCRIPTION | EST. Annual QTY | UNIT PRICE | TOTAL PRICE |
| 0012 | 4320 | 01-475-8806 | 110WPB259-006 ASSEMBLY C | Valve, Flapper, Pump | 001 | $ - 0 | $ - 0 |
| 8” Butterfly Exhaust Flapper Valve Sub-Assemblies used on the 110’ WPB Class Coast Guard vessels. Port Side Configuration. Manufactured in accordance with USCG drawing 110WPB 259-006 Rev. D, Dated 3/25/2009 and Work Item 1: 4320-01-475-8806, 8" Exhaust Flapper Valve, Purchase, dated 03/19. Valve encompasses assemblies B and C in accordance with General Note 13. | |||||||
| CLIN | FSC | NIIN | P/N | DESCRIPTION | EST. Annual QTY | UNIT PRICE | TOTAL PRICE |
| 0013 | 4810 | 01-475-8648 | 110WPB259-006-P | Valve, Butterfly | 002 | $ - 0 | $ - 0 |
| 8” Butterfly Exhaust Flapper Valve Complete Assembly for use on the Port side of Coast Guard 110’ WPB class cutters. Manufactured in accordance with Work Item 1: 4810-01-475-8648, 8" Exhaust Flapper Valve, Purchase, dated 03/19 and Coast Guard drawing 110WPB-259-006 Rev. D dated 3/25/2009. Encompasses Assemblies A, B, C, H and J - IAW General Note 12 on drawing. | |||||||
| CLIN | FSC | NIIN | P/N | DESCRIPTION | EST. Annual QTY | UNIT PRICE | TOTAL PRICE |
| 0014 | 4810 | 01-475-8415 | 110WPB259-006-S | Valve, Butterfly | 003 | $ - 0 | $ - 0 |
| 8” Butterfly Exhaust Flapper Valve, Complete Assembly for use on the Starboard side of Coast Guard 110’ WPB class cutters. Manufactured in accordance with Work Item 1: 4810-01-475-8415, 8" Exhaust Flapper Valve, Purchase, dated 02/19 and Coast Guard drawing 110WPB-259-006 Rev. D dated 3/25/2009. Encompasses Assemblies A, B, D, H and J - IAW General Note 12 on drawing. | |||||||
| CLIN | FSC | NIIN | P/N | DESCRIPTION | EST. Annual QTY | UNIT PRICE | TOTAL PRICE |
| 0015 | 2990 | 01-475-9621 | 110WPB259-005 ASSEMBLY H | Spray Ring Assembly | 002 | $ - 0 | $ - 0 |
| Port 18” Spray Ring Sub-Assembly. Manufactured in accordance with Work Item 1: 2990-01-475-9621, 18" Exhaust Spray Ring, Purchase, dated 02/19 and drawing 110WPB 259-005 Rev. C dated 1/14/2002. IAW note 10, assembly includes Assemblies B, C and H. Does not include companion pipe flanges or hardware. | |||||||
| CLIN | FSC | NIIN | P/N | DESCRIPTION | EST. Annual QTY | UNIT PRICE | TOTAL PRICE |
| 0016 | 2990 | 01-475-9620 | 110WPB 259-005 ASSEMBLY J | Spray Ring Assembly | 003 | $ - 0 | $ - 0 |
| Starboard 18" Spray Ring Sub-Assembly. Manufacture in accordance with Work Item 1: 2990-01-475-9620, 18" Exhaust Spray Ring, Purchase, dated 02/19 and drawing 110WPB 259-005 Rev. C 1/14/2002. IAW note 10, assembly includes Assemblies B, C and J. Does not include companion pipe flanges or hardware. | |||||||
| CLIN | FSC | NIIN | P/N | DESCRIPTION | EST. Annual QTY | UNIT PRICE | TOTAL PRICE |
| 0017 | 5306 | 99-538-1451 | Bolt, Special Tiller | P3665703-A | 021 | $ - 0 | $ - 0 |
| General - Manufacture IAW Drawing 110 WPB565-05 Rev. A dated 5/16/2002, PIECE #3, DETAIL 5-E. | |||||||
| Material Certification: ASTM A322 4340 heat treatment (Mechanical Property) "T". Heat to 830 deg. C - 860 Deg. C, hold until temperature is uniform throughout the section, soak for 10-15 minutes per 25mm section, quench in oil, water, or polymer as required. There is no requirement for coating or plating. There is no requirement for coding on bolts.Contractor shall provide certifications of material conformance to the Coast Guard QA Representative. | |||||||
| Welder Qualification – All welding if necessary shall be in accordance with Surface Forces Logistics Center Standard Specification 0740 (SFLC Std Spec 0740), 2012, Welding and Allied Processes. | |||||||
| Notifications & Inspections – The contractor shall be responsible for notifying the Contracting Officer no less then ten (10) calendar days prior to the contractor being ready for any Quality Assurance (Q.A.) inspections or testing required herein. Thirty (30) calendar days shall be allowed should the contract be awarded to a foreign contractor. | |||||||
| Inspections & Tests – The inspections & tests required herein are the minimum necessary and are not intended to replace any controls, examinations, or tests normally employed by the contractor to assure the quality of the product. The following will be witnessed by a Coast Guard Quality Assurance Representative at the Contractor's facility: a) Material Certifications as required upon request by the Coast Guard Quality Assurance Representative. b) Conformance to dimensional tolerances, surface texture and overall workmanship requirements. c) Overall assembly completeness as required by this statement of work and the drawing. d) Inspection of packaging, packing, marking and bar-coding. | |||||||
| Preservation, Packaging and Marking – Each item shall be individually preserved and packaged as appropriate in accordance with MIL-STD-2073-1E Method 10, cushioned or secured to prevent movement or damage from external impact. Each item shall then be packed in an appropriately sized ASTM-D5118 Double-wall Fiberboard Box. Each package shall be Marked IAW MIL-STD-129R. | |||||||
| Bar Coding – Each Flange shall be bar coded IAW ISO/IEC-16388-2007, Code 39 Symbology. The Bar Code Label can be applied separately or as part of the marking listed above. | |||||||
| Calibration System – The Contractor shall be required to maintain a test equipment calibration program in compliance with NCSL Z540-3. The program shall be documented and traceable to the National Institute of Standards (NIST). The calibration system records shall be maintained for inspection for the duration of any contract referencing this item. | |||||||
| CLIN | FSC | NIIN | P/N | DESCRIPTION | EST. Annual QTY | UNIT PRICE | TOTAL PRICE |
| 0018 | 5342 | 01-481-8403 | Anode, Propeller Nut | 87WPB243-001 | 064 | $ - 0 | $ - 0 |
| General - Manufacture IAW Drawing 87WPB-243-003 REV - dated 3/5/2018, ITEM #39. Item inside diameter to be machine finished to proper dimensions IAW drawing. Size of anode is 5.5" I.D. X 6.625" O.D. x 6.375" L. | |||||||
| Material Certification: Contractor shall provide certifications of material conformance to the Coast Guard QA Representative. | |||||||
| Welder Qualification – All welding if necessary shall be in accordance with Surface Forces Logistics Center Standard Specification 0740 (SFLC Std Spec 0740), 2012, Welding and Allied Processes. | |||||||
| Notifications & Inspections – The contractor shall be responsible for notifying the Contracting Officer no less then ten (10) calendar days prior to the contractor being ready for any Quality Assurance (Q.A.) inspections or testing required herein. Thirty (30) calendar days shall be allowed should the contract be awarded to a foreign contractor. | |||||||
| Inspections & Tests – The inspections & tests required herein are the minimum necessary and are not intended to replace any controls, examinations, or tests normally employed by the contractor to assure the quality of the product. The following will be witnessed by a Coast Guard Quality Assurance Representative at the Contractor's facility: a) Material Certifications as required upon request by the Coast Guard Quality Assurance Representative. b) Conformance to dimensional tolerances, surface texture and overall workmanship requirements. c) Overall assembly completeness as required by this statement of work and the drawing. d) Inspection of packaging, packing, marking and bar-coding. | |||||||
| Preservation, Packaging and Marking – Each item shall be individually preserved and packaged as appropriate in accordance with MIL-STD-2073-1E Method 10, cushioned or secured to prevent movement or damage from external impact. Each item shall then be packed in an appropriately sized ASTM-D5118 Double-wall Fiberboard Box. Each package shall be Marked IAW MIL-STD-129R. | |||||||
| Bar Coding – Each Flange shall be bar coded IAW ISO/IEC-16388-2007, Code 39 Symbology. The Bar Code Label can be applied separately or as part of the marking listed above. | |||||||
| Calibration System – The Contractor shall be required to maintain a test equipment calibration program in compliance with NCSL Z540-3. The program shall be documented and traceable to the National Institute of Standards (NIST). The calibration system records shall be maintained for inspection for the duration of any contract referencing this item. | |||||||
| CLIN | FSC | NIIN | P/N | DESCRIPTION | EST. Annual QTY | UNIT PRICE | TOTAL PRICE |
| 0019 | 2010 | 01-458-9217 | Nut , Bronze | 87WPB243-001 ITEM 2 | 020 | $ - 0 | $ - 0 |
| General - Manufacture In accordance with Drawing 87WPB 243-003 REV. - dated 3/5/2018. B.O.M. Item Number 2. | |||||||
| Material Certification: Contractor shall provide certifications of material conformance to the Coast Guard Quality Assurance Representative. | |||||||
| Welder Qualification – All welding if necessary shall be in accordance with Surface Forces Logistics Center Standard Specification 0740 (SFLC Std Spec 0740), 2012, Welding and Allied Processes. | |||||||
| Notifications & Inspections – The contractor shall be responsible for notifying the Contracting Officer no less then ten (10) calendar days prior to the contractor being ready for any Quality Assurance (Q.A.) inspections or testing required herein. Thirty (30) calendar days shall be allowed should the contract be awarded to a foreign contractor. | |||||||
| Inspections & Tests – The inspections & tests required herein are the minimum necessary and are not intended to replace any controls, examinations, or tests normally employed by the contractor to assure the quality of the product. The following will be witnessed by a Coast Guard Quality Assurance Representative at the Contractor's facility: a) Material Certifications as required upon request by the Coast Guard Quality Assurance Representative. b) Conformance to dimensional tolerances, surface texture and overall workmanship requirements. c) Overall assembly completeness as required by this statement of work and the drawing. d) Inspection of packaging, packing, marking and bar-coding. | |||||||
| Preservation, Packaging and Marking – Each item shall be individually preserved and packaged as appropriate in accordance with MIL-STD-2073-1E Method 10, cushioned or secured to prevent movement or damage from external impact. Each item shall then be packed in an appropriately sized ASTM-D5118 Double-wall Fiberboard Box. Each package shall be Marked IAW MIL-STD-129R. | |||||||
| Bar Coding – Each NUT, BRONZE shall be bar coded IAW ISO/IEC-16388-2007, Code 39 Symbology. The Bar Code Label can be applied separately or as part of the marking listed above. | |||||||
| Calibration System – The Contractor shall be required to maintain a test equipment calibration program in compliance with NCSL Z540-3. The program shall be documented and traceable to the National Institute of Standards (NIST). The calibration system records shall be maintained for inspection for the duration of any contract referencing this item. | |||||||
| CLIN | FSC | NIIN | P/N | DESCRIPTION | EST. Annual QTY | UNIT PRICE | TOTAL PRICE |
| 0020 | 5310 | 01-458-9125 | Nut, Hex, Self Locking | 87WPB243-001 ITEM 3 | 025 | $ - 0 | $ - 0 |
| General - Manufactured IAW Coast Guard Drawing 87WPB 243-003 REVISION - dated 3/5/2018. B.O.M. Item Number 3. | |||||||
| Material Certification: Contractor shall provide certifications of material conformance to the Coast Guard Quality Assurance Representative. | |||||||
| Welder Qualification – All welding if necessary shall be in accordance with Surface Forces Logistics Center Standard Specification 0740 (SFLC Std Spec 0740), 2012, Welding and Allied Processes. | |||||||
| Notifications & Inspections – The contractor shall be responsible for notifying the Contracting Officer no less then ten (10) calendar days prior to the contractor being ready for any Quality Assurance (Q.A.) inspections or testing required herein. Thirty (30) calendar days shall be allowed should the contract be awarded to a foreign contractor. | |||||||
| Inspections & Tests – The inspections & tests required herein are the minimum necessary and are not intended to replace any controls, examinations, or tests normally employed by the contractor to assure the quality of the product. The following will be witnessed by a Coast Guard Quality Assurance Representative at the Contractor's facility: a) Material Certifications as required upon request by the Coast Guard Quality Assurance Representative. b) Conformance to dimensional tolerances, surface texture and overall workmanship requirements. c) Overall assembly completeness as required by this statement of work and the drawing. d) Inspection of packaging, packing, marking and bar-coding. | |||||||
| Preservation, Packaging and Marking – Each item shall be individually preserved and packaged as appropriate in accordance with MIL-STD-2073-1E Method 10, cushioned or secured to prevent movement or damage from external impact. Each item shall then be packed in an appropriately sized ASTM-D5118 Double-wall Fiberboard Box. Each package shall be Marked IAW MIL-STD-129R. | |||||||
| Bar Coding – Each NUT, BRONZE shall be bar coded IAW ISO/IEC-16388-2007, Code 39 Symbology. The Bar Code Label can be applied separately or as part of the marking listed above. | |||||||
| Calibration System – The Contractor shall be required to maintain a test equipment calibration program in compliance with NCSL Z540-3. The program shall be documented and traceable to the National Institute of Standards (NIST). The calibration system records shall be maintained for inspection for the duration of any contract referencing this item. | |||||||
| CLIN | FSC | NIIN | P/N | DESCRIPTION | EST. Annual QTY | UNIT PRICE | TOTAL PRICE |
| 0021 | 4320 | 01-475-8677 | 110WPB259-006 ASSEMBLY D | Valve, Flapper, Pump | 001 | $ - 0 | $ - 0 |
| 8” Butterfly Exhaust Flapper Valve Sub-Assembly used on the 110’ WPB class Coast Guard vessels. Manufactured in accordance with USCG drawing 110WPB 259-006 Rev. D, Dated 3/25/2009 and Work Item 1: 4320-01-475-8677, 8" Exhaust Flapper Valve, Purchase, dated 03/19. Valve encompasses assemblies B and D in accordance with General Note 13 on drawing. | |||||||
| CLIN | FSC | NIIN | P/N | DESCRIPTION | EST. Annual QTY | UNIT PRICE | TOTAL PRICE |
| 0022 | 3130 | 01-F11-2200 | 87WPB 243-001 Piece 15 | Aft Bearing Carrier | 030 | $ - 0 | $ - 0 |
| General - 87 WPB Aft Bearing Carrier manufactured in accordance with drawing 87WPB 243-003 Rev. - B.O.M.Dated 3/5/2018 Piece 15. | |||||||
| Material Certification: Material - ASTM A511, MT 316 or 316L. Contractor shall provide certifications of material conformance to the Coast Guard QA Representative. | |||||||
| Notifications & Inspections – The contractor shall be responsible for notifying the Contracting Officer no less then ten (10) calendar days prior to the contractor being ready for any Quality Assurance (Q.A.) inspections or testing required herein. | |||||||
| Inspections & Tests – The inspections & tests required herein are the minimum necessary and are not intended to replace any controls, examinations, or tests normally employed by the contractor to assure the quality of the product. The following will be witnessed by a CG Quality Assurance Representative: a) Material Certifications as required upon request by the Coast Guard Quality Assurance Representative. b) Conformance to dimensional tolerances, surface texture and overall workmanship requirements. c) Inspection of packaging and marking. | |||||||
| Preservation, Packaging and Marking – Each item shall be individually preserved and packaged as appropriate in accordance with MIL-STD-2073-1E Method 10, cushioned or secured to prevent movement or damage from external impact. Each item shall then be packed in an appropriately sized ASTM-D6251 Type III, Class 1 Wood-Cleated Panelboard Shipping Box or ASTM-D6880 Class 2 Heavy Duty screwed Wooden Box. Each package shall be Marked IAW MIL-STD-129R. | |||||||
| Bar Coding – Each Flange shall be bar coded IAW ISO/IEC-16388-2007, Code 39 Symbology. The Bar Code Label can be applied separately or as part of the marking listed above. | |||||||
| Calibration System – The Contractor shall be required to maintain a test equipment calibration program in compliance with NCSL Z540-3. The program shall be documented and traceable to the National Institute of Standards (NIST). The calibration system records shall be maintained for inspection for the duration of any contract referencing this item. | |||||||
| CLIN | FSC | NIIN | P/N | DESCRIPTION | EST. Annual QTY | UNIT PRICE | TOTAL PRICE |
| 0023 | 3130 | 01-F11-2388 | 87WPB 243-001 Piece 18 | Mid Bearing carrier | 032 | $ - 0 | $ - 0 |
| General - 87 WPB Aft Bearing Carrier manufactured in accordance with drawing 87WPB 243-003 Rev. - B.O.M.Dated 3/5/2018 Piece 17. | |||||||
| Material Certification: Material - ASTM A511, MT 316 or 316L. Contractor shall provide certifications of material conformance to the Coast Guard QA Representative. | |||||||
| Notifications & Inspections – The contractor shall be responsible for notifying the Contracting Officer no less then ten (10) calendar days prior to the contractor being ready for any Quality Assurance (Q.A.) inspections or testing required herein. | |||||||
| Inspections & Tests – The inspections & tests required herein are the minimum necessary and are not intended to replace any controls, examinations, or tests normally employed by the contractor to assure the quality of the product. The following will be witnessed by a CG Quality Assurance Representative: a) Material Certifications as required upon request by the Coast Guard Quality Assurance Representative. b) Conformance to dimensional tolerances, surface texture and overall workmanship requirements. c) Inspection of packaging and marking. | |||||||
| Preservation, Packaging and Marking – Each item shall be individually preserved and packaged as appropriate in accordance with MIL-STD-2073-1E Method 10, cushioned or secured to prevent movement or damage from external impact. Each item shall then be packed in an appropriately sized ASTM-D6251 Type III, Class 1 Wood-Cleated Panelboard Shipping Box or ASTM-D6880 Class 2 Heavy Duty screwed Wooden Box. Each package shall be Marked IAW MIL-STD-129R. | |||||||
| Bar Coding – Each Flange shall be bar coded IAW ISO/IEC-16388-2007, Code 39 Symbology. The Bar Code Label can be applied separately or as part of the marking listed above. | |||||||
| Calibration System – The Contractor shall be required to maintain a test equipment calibration program in compliance with NCSL Z540-3. The program shall be documented and traceable to the National Institute of Standards (NIST). The calibration system records shall be maintained for inspection for the duration of any contract referencing this item. | |||||||
| Bar Coding – Each Bearing Carrier shall be Bar Coded in accordance with in accordance with SFLC specification D-000-100 Rev. G Dated 2/23/06. The Bar Code Label can be applied separately or as part of the marking listed above. Each Flange shall be de-burred to remove all sharp edges. | |||||||
| Calibration System – The Contractor shall be required to maintain a test equipment calibration program in compliance with NCSL Z540-3. The program shall be documented and traceable to the National Institute of Standards (NIST). The calibration system records shall be maintained for inspection for the duration of any contract referencing this item. | |||||||
| Warranty - Standard manufacturer's warranty applies to all the items listed in this requirement. |
&C&14BPA ITEMS FOR MANUFACTURE BASE YEAR
Year 2
| Year | FSC | NIIN | P/N | DESCRIPTION | EST. Annual QTY | UNIT PRICE | TOTAL PRICE |
| 1001 | 2990 | 01-460-0214 | 110WPB259-005 ASSY D | Flange Exhaust Pipe 18" | 001 | $ - 0 | $ - 0 |
| General - 18" Lower Companion Pipe Flange manufactured in accordance with drawing 110WPB 259-005 Rev. C Dated 1/14/02 Assembly D. | |||||||
| Material Certification: Contractor shall provide certifications of material conformance to the Coast Guard QA Representative. | |||||||
| Flange Sealing Surfaces: All flanged sealing surfaces shall be machined to obtain a spiral serrated gasket surface finish (phonographic finish). As a general rule, a 1/16" radius round-nosed tool at a feed of 1/32" for flanges 12" diameter and smaller. Sizes larger than 12" diameter an 1/16” radius round-nosed tool at a feed of 0.050” for flanges over 12” diameter shall be used. | |||||||
| Welder Qualification – All welding if necessary shall be in accordance with Surface Forces Logistics Center Standard Specification 0740 (SFLC Std Spec 0740), 2012, Welding and Allied Processes. | |||||||
| Notifications & Inspections – The contractor shall be responsible for notifying the Contracting Officer no less then ten (10) calendar days prior to the contractor being ready for any Quality Assurance (Q.A.) inspections or testing required herein. Thirty (30) calendar days shall be allowed should the contract be awarded to a foreign contractor. | |||||||
| Inspections & Tests – The inspections & tests required herein are the minimum necessary and are not intended to replace any controls, examinations, or tests normally employed by the contractor to assure the quality of the product. The following will be witnessed by a CG Quality Assurance Representative: a) Material Certifications as required upon request by the Coast Guard Quality Assurance Representative. b) Conformance to dimensional tolerances, surface texture and overall workmanship requirements. c) Overall assembly completeness as required by this statement of work and the drawing. d) Inspection of packaging and marking. | |||||||
| Preservation, Packaging and Marking – Each item shall be individually preserved and packaged as appropriate in accordance with MIL-STD-2073-1E Method 10, cushioned or secured to prevent movement or damage from external impact. Each item shall then be packed in an appropriately sized ASTM-D6251 Type III, Class 1 Wood-Cleated Panelboard Shipping Box or ASTM-D6880 Class 2 Heavy Duty screwed Wooden Box. Each package shall be Marked IAW MIL-STD-129R. | |||||||
| Bar Coding – Each Flange shall be bar coded IAW ISO/IEC-16388-2007, Code 39 Symbology. The Bar Code Label can be applied separately or as part of the marking listed above. | |||||||
| Calibration System – The Contractor shall be required to maintain a test equipment calibration program in compliance with NCSL Z540-3. The program shall be documented and traceable to the National Institute of Standards (NIST). The calibration system records shall be maintained for inspection for the duration of any contract referencing this item. | |||||||
| CLIN | FSC | NIIN | P/N | DESCRIPTION | EST. Annual QTY | UNIT PRICE | TOTAL PRICE |
| 1002 | 2990 | 01-475-9800 | 110WPB259-006 ASSY A | Flange, Exhaust Pipe 8" | 001 | $ - 0 | $ - 0 |
| General - 8" Companion Pipe Flange manufactured in accordance with drawing 110WPB 259-006 Rev. D Dated 3/25/09 Assembly A. | |||||||
| Material Certification: Contractor shall provide certifications of material conformance to the Coast Guard QA Representative. | |||||||
| Flange Sealing Surfaces: All flanged sealing surfaces shall be machined to obtain a spiral serrated gasket surface finish (phonographic finish). As a general rule, a 1/16" radius round-nosed tool at a feed of 1/32" for flanges 12" diameter and smaller. Sizes larger than 12" diameter an 1/16” radius round-nosed tool at a feed of 0.050” for flanges over 12” diameter shall be used. | |||||||
| Welder Qualification – All welding if necessary shall be in accordance with Surface Forces Logistics Center Standard Specification 0740 (SFLC Std Spec 0740), 2012, Welding and Allied Processes. | |||||||
| Notifications & Inspections – The contractor shall be responsible for notifying the Contracting Officer no less then ten (10) calendar days prior to the contractor being ready for any Quality Assurance (Q.A.) inspections or testing required herein. Thirty (30) calendar days shall be allowed should the contract be awarded to a foreign contractor. | |||||||
| Inspections & Tests – The inspections & tests required herein are the minimum necessary and are not intended to replace any controls, examinations, or tests normally employed by the contractor to assure the quality of the product. The following will be witnessed by a CG Quality Assurance Representative: a) Material Certifications are required upon request by the Coast Guard Quality Assurance Representative. b) Conformance to dimensional tolerances, surface texture and overall workmanship requirements. c) Overall assembly completeness as required by this statement of work and the drawing. d) Inspection of packaging and marking. | |||||||
| Preservation, Packaging and Marking – Each item shall be individually preserved and packaged as appropriate in accordance with MIL-STD-2073-1E Method 10, cushioned or secured to prevent movement or damage from external impact. Each item shall then be packed in an appropriately sized ASTM-D6251 Type III, Class 1 Wood-Cleated Panelboard Shipping Box or ASTM-D6880 Class 2 Heavy Duty screwed Wooden Box. Each package shall be Marked IAW MIL-STD-129R. | |||||||
| Bar Coding – Each Flange shall be bar coded IAW ISO/IEC-16388-2007, Code 39 Symbology. The Bar Code Label can be applied separately or as part of the marking listed above. | |||||||
| Calibration System – The Contractor shall be required to maintain a test equipment calibration program in compliance with NCSL Z540-3. The program shall be documented and traceable to the National Institute of Standards (NIST). The calibration system records shall be maintained for inspection for the duration of any contract referencing this item. | |||||||
| CLIN | FSC | NIIN | P/N | DESCRIPTION | EST. Annual QTY | UNIT PRICE | TOTAL PRICE |
| 1003 | 2990 | 01-460-0205 | 110WPB259-005 ASSY A | Flange Exhaust Pipe 18" | 001 | $ - 0 | $ - 0 |
| General – Manufactured in accordance with drawing 110WPB 259-005 Rev. C Dated 1/14/02 Assembly D. | |||||||
| Material Certification: Contractor shall provide certifications of material conformance to the Coast Guard QA Representative. | |||||||
| Flange Sealing Surfaces: All flanged sealing surfaces shall be machined to obtain a spiral serrated gasket surface finish (phonographic finish). As a general rule, a 1/16" radius round-nosed tool at a feed of 1/32" for flanges 12" diameter and smaller. Sizes larger than 12" diameter an 1/16” radius round-nosed tool at a feed of 0.050” for flanges over 12” diameter shall be used. | |||||||
| Welder Qualification – All welding if necessary shall be in accordance with Surface Forces Logistics Center Standard Specification 0740 (SFLC Std Spec 0740), 2012, Welding and Allied Processes. | |||||||
| Notifications & Inspections – The contractor shall be responsible for notifying the Contracting Officer no less then ten (10) calendar days prior to the contractor being ready for any Quality Assurance (Q.A.) inspections or testing required herein. Thirty (30) calendar days shall be allowed should the contract be awarded to a foreign contractor. | |||||||
| Inspections & Tests – The inspections & tests required herein are the minimum necessary and are not intended to replace any controls, examinations, or tests normally employed by the contractor to assure the quality of the product. The following will be witnessed by a CG Quality Assurance Representative: a) Material Certifications as required upon request by the Coast Guard Quality Assurance Representative. b) Conformance to dimensional tolerances, surface texture and overall workmanship requirements. c) Overall assembly completeness as required by this statement of work and the drawing. d) Inspection of packaging and marking. | |||||||
| Preservation, Packaging and Marking – Each item shall be individually preserved and packaged as appropriate in accordance with MIL-STD-2073-1E Method 10, cushioned or secured to prevent movement or damage from external impact. Each item shall then be packed in an appropriately sized ASTM-D6251 Type III, Class 1 Wood-Cleated Panelboard Shipping Box or ASTM-D6880 Class 2 Heavy Duty screwed Wooden Box. Each package shall be Marked IAW MIL-STD-129R. | |||||||
| Bar Coding – Each Flange shall be bar coded IAW ISO/IEC-16388-2007, Code 39 Symbology. The Bar Code Label can be applied separately or as part of the marking listed above. | |||||||
| Calibration System – The Contractor shall be required to maintain a test equipment calibration program in compliance with NCSL Z540-3. The program shall be documented and traceable to the National Institute of Standards (NIST). The calibration system records shall be maintained for inspection for the duration of any contract referencing this item. | |||||||
| CLIN | FSC | NIIN | P/N | DESCRIPTION | EST. Annual QTY | UNIT PRICE | TOTAL PRICE |
| 1004 | 4810 | 01-475-7855 | 110CWPB259-003-S | Valve, Flapper Assembly | 001 | $ - 0 | $ - 0 |
| Butterfly Type Exhaust (Flapper) Valve, Complete Assembly, 18" Diameter, with electric actuator, Companion Flanges, Gaskets and solenoid limit (open/close) switches. Manufactured in accordance with Coast Guard drawing 110C WPB 259-003 Rev. E Dated 5/06/2004 and Work Item 1: 4810-01-475-7855, 18" Exhaust Flapper Valve, Purchase, dated 03/19. For Starboard side application. Encompasses Assemblies A, B, C, D, J, K and M per General Note 13 on drawing. | |||||||
| CLIN | FSC | NIIN | P/N | DESCRIPTION | EST. Annual QTY | UNIT PRICE | TOTAL PRICE |
| 1005 | 4810 | 01-475-8271 | 110CWPB259-003-P | Flapper Valve Assembly | 001 | $ - 0 | $ - 0 |
| Butterfly Type Exhaust (Flapper) Valve, Complete Assembly 18" Diameter, with electric actuatorCompanion Flanges, Gaskets and solenoid limit (open/close) switches. Manufactured in accordance with Coast Guard drawing 110C WPB 259-003 Rev. E Dated 5/06/2004 and Work Item 1: 4810-01-475-8271, 18" Exhaust Flapper Valve, Purchase, dated 03/19. For Port side application. Encompasses assemblies A, B, C, D, H, K and M per General Note 13 on drawing. | |||||||
| CLIN | FSC | NIIN | P/N | DESCRIPTION | EST. Annual QTY | UNIT PRICE | TOTAL PRICE |
| 1006 | 4320 | 01-475-8280 | 110WPB259-003 ASSEMBLY H | Valve, Flapper | 001 | $ - 0 | $ - 0 |
| Butterfly valve and spray ring sub-assembly for port side application on Coast Guard 110' WPB Class cutters. Manufactured, packaged, packed and marked in accordance with Coast Guard drawing 110CWPB 259-003 Rev. E Dated 5/06/2004, assembly "H" and Work Item 1: 4320-01-475-8280 18" Exhaust Flapper Valve, Purchase, dated 03/19. Includes assemblies "B", "C" AND "H" in accordance with general note 14 on drawing. | |||||||
| CLIN | FSC | NIIN | P/N | DESCRIPTION | EST. Annual QTY | UNIT PRICE | TOTAL PRICE |
| 1007 | 4320 | 01-475-7884 | 110WPB259-003 ASSEMBLY J | Valve, Flapper | 001 | $ - 0 | $ - 0 |
| Butterfly valve and spray ring sub-assembly for starboard side application on Coast Guard 110' WPB Class cutters. Manufactured in accordance with Coast Guard drawing 110CWPB 259-003 Rev. E, Dated 5/06/2004 and Work Item 1: 4320-01-475-7884,18" Exhaust Flapper Valve, Purchase, dated 03/19. Includes assemblies "B", "C" AND "J" in accordance with general note 14 on drawing. | |||||||
| CLIN | FSC | NIIN | P/N | DESCRIPTION | EST. Annual QTY | UNIT PRICE | TOTAL PRICE |
| 1008 | 3130 | 01-442-2863 | 5686719 | Housing, Bearing Unit, FWD | 004 | $ - 0 | $ - 0 |
| Manufacture, Inspect, Package and Mark Bearing Housing IAW attached Work Item1: 3130-01-442-2863, Forward Bearing Housing, Purchase, dated 02/19. Final assembly shall include items 2, 8, 9 and 26 IAW drawing 110CWPB-161-005 Rev. G Dated 03/08/2014. | |||||||
| CLIN | FSC | NIIN | P/N | DESCRIPTION | EST. Annual QTY | UNIT PRICE | TOTAL PRICE |
| 1009 | 2040 | 01-486-7595 | 110WPB-513-005 | Ventillator, Air Circulation | 001 | $ - 0 | $ - 0 |
| Lever operated louvered vent that opens and closes. Manufactured IAW Coast Guard drawing 110 WPB-513-005 Rev. C dated 1/14/2002 and Work Item 1: 2040-01-486-7595, Louvered Inlet Vents, Purchase dated 02/19. | |||||||
| CLIN | FSC | NIIN | P/N | DESCRIPTION | EST. Annual QTY | UNIT PRICE | TOTAL PRICE |
| 1010 | 2990 | 01-475-9354 | 110WPB259-005-S | Exhaust System, Engine | 1 | $ - 0 | $ - 0 |
| Starboard 18” Spray Ring Complete Assembly with Companion Flanges and Gaskets. Manufactured in accordance with Work Item: 2990-01-475-9354, 18" Exhaust Spray Rings, Purchase dated 02/19 and Coast Guard drawing 110WPB 259-005 Rev. C 1/14/2002. In accordance with Note 9 assembly shall include assemblies A, B, C, D and J. | |||||||
| CLIN | FSC | NIIN | P/N | DESCRIPTION | EST. Annual QTY | UNIT PRICE | TOTAL PRICE |
| 1011 | 2990 | 01-475-9360 | 110WPB259-005-P | Exhaust System, Engine | 001 | $ - 0 | $ - 0 |
| Port 18” Spray Ring Complete Assembly with Companion Flanges and Gakets. Manufactured in accordance with Work Item: 2990-01-475-9360, 1 Exhaust Spray Rings, Purchase, dated 02/19 and Coast Guard drawing 110WPB 259-005 Rev C dated 1/14/2002. In accordance with Note 9 assembly shall include assemblies A, B, C, D and H. | |||||||
| CLIN | FSC | NIIN | P/N | DESCRIPTION | EST. Annual QTY | UNIT PRICE | TOTAL PRICE |
| 1012 | 4320 | 01-475-8806 | 110WPB259-006 ASSEMBLY C | Valve, Flapper, Pump | 001 | $ - 0 | $ - 0 |
| 8” Butterfly Exhaust Flapper Valve Sub-Assemblies used on the 110’ WPB Class Coast Guard vessels. Port Side Configuration. Manufactured in accordance with USCG drawing 110WPB 259-006 Rev. D, Dated 3/25/2009 and Work Item 1: 4320-01-475-8806, 8" Exhaust Flapper Valve, Purchase, dated 03/19. Valve encompasses assemblies B and C in accordance with General Note 13. | |||||||
| CLIN | FSC | NIIN | P/N | DESCRIPTION | EST. Annual QTY | UNIT PRICE | TOTAL PRICE |
| 1013 | 4810 | 01-475-8648 | 110WPB259-006-P | Valve, Butterfly | 002 | $ - 0 | $ - 0 |
| 8” Butterfly Exhaust Flapper Valve Complete Assembly for use on the Port side of Coast Guard 110’ WPB class cutters. Manufactured in accordance with Work Item 1: 4810-01-475-8648, 8" Exhaust Flapper Valve, Purchase, dated 03/19 and Coast Guard drawing 110WPB-259-006 Rev. D dated 3/25/2009. Encompasses Assemblies A, B, C, H and J - IAW General Note 12 on drawing. | |||||||
| CLIN | FSC | NIIN | P/N | DESCRIPTION | EST. Annual QTY | UNIT PRICE | TOTAL PRICE |
| 1014 | 4810 | 01-475-8415 | 110WPB259-006-S | Valve, Butterfly | 003 | $ - 0 | $ - 0 |
| 8” Butterfly Exhaust Flapper Valve, Complete Assembly for use on the Starboard side of Coast Guard 110’ WPB class cutters. Manufactured in accordance with Work Item 1: 4810-01-475-8415, 8" Exhaust Flapper Valve, Purchase, dated 02/19 and Coast Guard drawing 110WPB-259-006 Rev. D dated 3/25/2009. Encompasses Assemblies A, B, D, H and J - IAW General Note 12 on drawing. | |||||||
| CLIN | FSC | NIIN | P/N | DESCRIPTION | EST. Annual QTY | UNIT PRICE | TOTAL PRICE |
| 1015 | 2990 | 01-475-9621 | 110WPB259-005 ASSEMBLY H | Spray Ring Assembly | 002 | $ - 0 | $ - 0 |
| Port 18” Spray Ring Sub-Assembly. Manufactured in accordance with Work Item 1: 2990-01-475-9621, 18" Exhaust Spray Ring, Purchase, dated 02/19 and drawing 110WPB 259-005 Rev. C dated 1/14/2002. IAW note 10, assembly includes Assemblies B, C and H. Does not include companion pipe flanges or hardware. | |||||||
| CLIN | FSC | NIIN | P/N | DESCRIPTION | EST. Annual QTY | UNIT PRICE | TOTAL PRICE |
| 1016 | 2990 | 01-475-9620 | 110WPB 259-005 ASSEMBLY J | Spray Ring Assembly | 003 | $ - 0 | $ - 0 |
| Starboard 18" Spray Ring Sub-Assembly. Manufacture in accordance with Work Item 1: 2990-01-475-9620, 18" Exhaust Spray Ring, Purchase, dated 02/19 and drawing 110WPB 259-005 Rev. C 1/14/2002. IAW note 10, assembly includes Assemblies B, C and J. Does not include companion pipe flanges or hardware. | |||||||
| CLIN | FSC | NIIN | P/N | DESCRIPTION | EST. Annual QTY | UNIT PRICE | TOTAL PRICE |
| 1017 | 5306 | 99-538-1451 | Bolt, Special Tiller | P3665703-A | 021 | $ - 0 | $ - 0 |
| Material Certification: ASTM A322 4340 heat treatment (Mechanical Property) "T". Heat to 830 deg. C - 860 Deg. C, hold until temperature is uniform throughout the section, soak for 10-15 minutes per 25mm section, quench in oil, water, or polymer as required. There is no requirement for coating or plating. There is no requirement for coding on bolts.Contractor shall provide certifications of material conformance to the Coast Guard QA Representative. | |||||||
| Welder Qualification – All welding if necessary shall be in accordance with Surface Forces Logistics Center Standard Specification 0740 (SFLC Std Spec 0740), 2012, Welding and Allied Processes. | |||||||
| Notifications & Inspections – The contractor shall be responsible for notifying the Contracting Officer no less then ten (10) calendar days prior to the contractor being ready for any Quality Assurance (Q.A.) inspections or testing required herein. Thirty (30) calendar days shall be allowed should the contract be awarded to a foreign contractor. | |||||||
| Inspections & Tests – The inspections & tests required herein are the minimum necessary and are not intended to replace any controls, examinations, or tests normally employed by the contractor to assure the quality of the product. The following will be witnessed by a Coast Guard Quality Assurance Representative at the Contractor's facility: a) Material Certifications as required upon request by the Coast Guard Quality Assurance Representative. b) Conformance to dimensional tolerances, surface texture and overall workmanship requirements. c) Overall assembly completeness as required by this statement of work and the drawing. d) Inspection of packaging, packing, marking and bar-coding. | |||||||
| Preservation, Packaging and Marking – Each item shall be individually preserved and packaged as appropriate in accordance with MIL-STD-2073-1E Method 10, cushioned or secured to prevent movement or damage from external impact. Each item shall then be packed in an appropriately sized ASTM-D5118 Double-wall Fiberboard Box. Each package shall be Marked IAW MIL-STD-129R. | |||||||
| Bar Coding – Each Flange shall be bar coded IAW ISO/IEC-16388-2007, Code 39 Symbology. The Bar Code Label can be applied separately or as part of the marking listed above. | |||||||
| Calibration System – The Contractor shall be required to maintain a test equipment calibration program in compliance with NCSL Z540-3. The program shall be documented and traceable to the National Institute of Standards (NIST). The calibration system records shall be maintained for inspection for the duration of any contract referencing this item. |
This is the start of the file's text. The full file is on GovTribe.
File details come from the government source that posted it. Updated .