CLIN_List_2020_PBPL_Parts_Manufacture.xls

XLS spreadsheet 151 KB Posted Mar 4, 2019

Attached to: 87' & 110' Patrol Boat Parts Manufacture
Solicitation number: 70Z08019S17002B00
Issued by: Department of Homeland Security US Coast Guard

About this file

From the source

This is a list of the 23 items/parts to be produced and the annual demand

View the file

On GovTribe

Work with this file

Download the original file
Contacts named in this file
Similar government files
Ask GovTribe AI about this file

Try for free Login

Text version

The file's text, extracted by GovTribe without its formatting.

Base Yr

CLIN	FSC	NIIN	P/N	DESCRIPTION	EST. Annual QTY	UNIT PRICE	TOTAL PRICE
0001	2990	01-460-0214	110WPB259-005 ASSY D	Flange Exhaust Pipe 18"	001	$ - 0	$ - 0
General - 18" Lower Companion Pipe Flange manufactured in accordance with drawing 110WPB 259-005 Rev. C Dated 1/14/02 Assembly D.
Material Certification: Contractor shall provide certifications of material conformance to the Contracting Officer and Coast Guard Quality Assurance (QA) representative.
Flange Sealing Surfaces: All flanged sealing surfaces shall be machined to obtain a spiral serrated gasket surface finish (phonographic finish). As a general rule, a 1/16" radius round-nosed tool at a feed of 1/32" for flanges 12" diameter and smaller. Sizes larger than 12" diameter an 1/16” radius round-nosed tool at a feed of 0.050” for flanges over 12” diameter shall be used.
Welder Qualification – All welding if necessary shall be in accordance with Surface Forces Logistics Center Standard Specification 0740 (SFLC Std Spec 0740), 2014, Welding and Allied Processes.
Notifications & Inspections – The Contractor shall be responsible for notifying the Contracting Officer no less then ten (10) calendar days prior to the contractor being ready for any QA inspections or testing required herein. Thirty (30) calendar days shall be allowed should the contract be awarded to a foreign contractor.
Inspections & Tests – The inspections & tests required herein are the minimum necessary and are not intended to replace any controls, examinations, or tests normally employed by the contractor to assure the quality of the product. The following will be witnessed by a Coast Guard QA: a) Material Certifications as required upon request by the Coast Guard QA representative. b) Conformance to dimensional tolerances, surface texture and overall workmanship requirements. c) Overall assembly completeness as required by this statement of work and the drawing. d) Inspection of packaging, Packing, marking and Bar-Coding.
Packaging, Packing and Marking – Packaging and Marking shall be conducted in accordance with ASTM D3951-10, dated 8/15/2010, Standard Practice for Commercial Packaging.
Bar Coding – Each Flange shall be Bar Coded in accordance with in accordance with MIL-STD-129P w/Change 4. See paragraph 4.4, page 47 of MIL-STD-129P w/Change 4 for identification linear (Code 39) and 2D (PDF417) bar code markings and locations. The Bar Code Label can be applied separately or as part of the marking listed above.
Calibration System – The Contractor shall be required to maintain a test equipment calibration program in compliance with ANS/ISO/IEC 17025. The program shall be documented and traceable to the National Institute of Standards (NIST). The calibration system records shall be maintained for inspection for the duration of any contract referencing this item.
CLIN	FSC	NIIN	P/N	DESCRIPTION	EST. Annual QTY	UNIT PRICE	TOTAL PRICE
0002	2990	01-475-9800	110WPB259-006 ASSY A	Flange, Exhaust Pipe 8"	001	$ - 0	$ - 0
General - 8" Companion Pipe Flange manufactured in accordance with drawing 110WPB 259-006 Rev. D Dated 3/25/09 Assembly A.
Material Certification: Contractor shall provide certifications of material conformance to the Coast Guard Quality Assurance (QA) representative.
Flange Sealing Surfaces: All flanged sealing surfaces shall be machined to obtain a spiral serrated gasket surface finish (phonographic finish). As a general rule, a 1/16" radius round-nosed tool at a feed of 1/32" for flanges 12" diameter and smaller. Sizes larger than 12" diameter an 1/16” radius round-nosed tool at a feed of 0.050” for flanges over 12” diameter shall be used.
Welder Qualification – All welding if necessary shall be in accordance with Surface Forces Logistics Center Standard Specification 0740 (SFLC Std Spec 0740), 2014, Welding and Allied Processes.
Notifications & Inspections – The Contractor shall be responsible for notifying the Contracting Officer no less then ten (10) calendar days prior to the contractor being ready for any QA inspections or testing required herein. Thirty (30) calendar days shall be allowed should the contract be awarded to a foreign Contractor.
Inspections & Tests – The inspections & tests required herein are the minimum necessary and are not intended to replace any controls, examinations, or tests normally employed by the contractor to assure the quality of the product. The following will be witnessed by a Coast Guard QA representative: a) Material Certifications are required upon request by the Coast Guard QA representative. b) Conformance to dimensional tolerances, surface texture and overall workmanship requirements. c) Overall assembly completeness as required by this statement of work and the drawing. d) Inspection of packaging, Packing, marking and Bar-Coding.
Preservation, Packaging and Marking – Packaging, Packing and Marking shall be conducted in accordance with ASTM D3951-10, dated 8/15/2010, Standard Practice for Commercial Packaging.
Bar Coding – Each Flange shall be Bar Coded in accordance with in accordance with MIL-STD-129P w/Change 4. See paragraph 4.4, page 47 of MIL-STD-129P w/Change 4 for identification linear (Code 39) and 2D (PDF417) bar code markings and locations.. The Bar Code Label can be applied separately or as part of the marking listed above. Each Flange shall be de-burred to remove all sharp edges.
Calibration System – The Contractor shall be required to maintain a test equipment calibration program in compliance with ANS/ISO/IEC 17025. The program shall be documented and traceable to the National Institute of Standards (NIST). The calibration system records shall be maintained for inspection for the duration of any contract referencing this item.
CLIN	FSC	NIIN	P/N	DESCRIPTION	EST. Annual QTY	UNIT PRICE	TOTAL PRICE
0003	2990	01-460-0205	110WPB259-005 ASSY A	Flange Exhaust Pipe 18"	001	$ - 0	$ - 0
General – Manufactured in accordance with drawing 110WPB 259-005 Rev. C Dated 1/14/02 Assembly D.
Material Certification: Contractor shall provide certifications of material conformance to the Coast Guard Quality Assurance (QA) representative.
Flange Sealing Surfaces: All flanged sealing surfaces shall be machined to obtain a spiral serrated gasket surface finish (phonographic finish). As a general rule, a 1/16" radius round-nosed tool at a feed of 1/32" for flanges 12" diameter and smaller. Sizes larger than 12" diameter an 1/16” radius round-nosed tool at a feed of 0.050” for flanges over 12” diameter shall be used.
Welder Qualification – All welding if necessary shall be in accordance with Surface Forces Logistics Center Standard Specification 0740 (SFLC Std Spec 0740), 2014, Welding and Allied Processes.
Notifications & Inspections – The Contractor shall be responsible for notifying the Contracting Officer no less then ten (10) calendar days prior to the contractor being ready for any Quality Assurance (Q.A.) inspections or testing required herein. Thirty (30) calendar days shall be allowed should the contract be awarded to a foreign Contractor.
Inspections & Tests – The inspections & tests required herein are the minimum necessary and are not intended to replace any controls, examinations, or tests normally employed by the contractor to assure the quality of the product. The following will be witnessed by a Coast Guard QA representative: a) Material Certifications as required upon request by the Coast Guard QA representative. b) Conformance to dimensional tolerances, surface texture and overall workmanship requirements. c) Overall assembly completeness as required by this statement of work and the drawing. d) Inspection of packaging, Packing, marking and Bar-coding.
Packaging, Packaging and Marking – Preservation, Packaging and Marking shall be conducted in accordance with ASTM D3951-10, dated 8/15/2010, Standard Practice for Commercial Packaging.
Bar Coding – Each Flange shall be Bar Coded in accordance with in accordance with MIL-STD-129P w/Change 4. See paragraph 4.4, page 47 of MIL-STD-129P w/Change 4 for identification linear (Code 39) and 2D (PDF417) bar code markings and locations.. The Bar Code Label can be applied separately or as part of the marking listed above. Each Flange shall be de-burred to remove all sharp edges.
Calibration System – The Contractor shall be required to maintain a test equipment calibration program in compliance with ANSI/ASQ Q9001. The program shall be documented and traceable to the National Institute of Standards (NIST). The calibration system records shall be maintained for inspection for the duration of any contract referencing this item.
CLIN	FSC	NIIN	P/N	DESCRIPTION	EST. Annual QTY	UNIT PRICE	TOTAL PRICE
0004	4810	01-475-7855	110CWPB259-003-S	Valve, 18" Flapper Assbly	001	$ - 0	$ - 0
Butterfly Type Exhaust (Flapper) Valve, Complete Assembly, 18" Diameter, with electric actuator, Companion Flanges, Gaskets and solenoid limit (open/close) switches. Manufactured in accordance with Coast Guard drawing 110C WPB 259-003 Rev. E Dated 5/06/2004 and Work Item 1: 18" Exhaust Flapper Valve, Manufacture, dated 10/18. For Starboard side application. Encompasses Assemblies A, B, C, D, J, K and M per General Note 13 on drawing.
CLIN	FSC	NIIN	P/N	DESCRIPTION	EST. Annual QTY	UNIT PRICE	TOTAL PRICE
0005	4810	01-475-8271	110CWPB259-003-P	Flapper Valve Assembly	001	$ - 0	$ - 0
Butterfly Type Exhaust (Flapper) Valve, Complete Assembly 18" Diameter, with electric actuatorCompanion Flanges, Gaskets and solenoid limit (open/close) switches. Manufactured in accordance with Coast Guard drawing 110C WPB 259-003 Rev. E Dated 5/06/2004 and Work Item 1: 18" Exhaust Flapper Valve, Manufacture, dated 10/18. For Port side application. Encompasses assemblies A, B, C, D, H, K and M per General Note 13 on drawing.
CLIN	FSC	NIIN	P/N	DESCRIPTION	EST. Annual QTY	UNIT PRICE	TOTAL PRICE
0006	4320	01-475-8280	110WPB259-003 ASSEMBLY H	18" Valve, Flapper	001	$ - 0	$ - 0
Butterfly valve and spray ring sub-assembly for port side application on Coast Guard 110' WPB Class cutters. Manufactured, packaged, packed and marked in accordance with Coast Guard drawing 110CWPB 259-003 Rev. E Dated 5/06/2004, assembly "H" and Work Item 1: 18" Exhaust Flapper Valve, Manufacture, dated 10/18. Includes assemblies "B", "C" AND "H" in accordance with general note 14 on drawing.
CLIN	FSC	NIIN	P/N	DESCRIPTION	EST. Annual QTY	UNIT PRICE	TOTAL PRICE
0007	4320	01-475-7884	110WPB259-003 ASSEMBLY J	18" Valve, Flapper	001	$ - 0	$ - 0
Butterfly valve and spray ring sub-assembly for starboard side application on Coast Guard 110' WPB Class cutters. Manufactured in accordance with Coast Guard drawing 110CWPB 259-003 Rev. E, Dated 5/06/2004 and Work Item 1: 18" Exhaust Flapper Valve, Manufacture, dated 10/18. Includes assemblies "B", "C" AND "J" in accordance with general note 14 on drawing.
CLIN	FSC	NIIN	P/N	DESCRIPTION	EST. Annual QTY	UNIT PRICE	TOTAL PRICE
0008	3130	01-442-2863	5686719	Housing, Bearing Unit, FWD	006	$ - 0	$ - 0
Manufacture, Inspect, Package and Mark Bearing Housing IAW attached Work Item1: Forward Bearing Housing, Manufacture. Final assembly shall include items 2, 8, 9 and 26 IAW drawing 110CWPB-161-005 Rev. G Dated 03/08/2014.
CLIN	FSC	NIIN	P/N	DESCRIPTION	EST. Annual QTY	UNIT PRICE	TOTAL PRICE
0009	2040	01-486-7595	110WPB-513-005	Ventillator, Air Circulation	003	$ - 0	$ - 0
Lever operated louvered vent that opens and closes. Manufactured IAW Coast Guard drawing 110 WPB-513-005 Rev. C dated 1/14/2002 and Work Item 1: Louvered Inlet Vents, Manufacture dated 11/18.
CLIN	FSC	NIIN	P/N	DESCRIPTION	EST. Annual QTY	UNIT PRICE	TOTAL PRICE
0010	2990	01-475-9354	110WPB259-005-S	Exhaust System, Engine	1	$ - 0	$ - 0
Starboard 18” Spray Ring Complete Assembly with Companion Flanges and Gaskets. Manufactured in accordance with Work Item: 1 Exhaust Spray Rings, Manufacture and Coast Guard drawing 110WPB 259-005 Rev. C 1/14/2002. In accordance with Note 9 assembly shall include assemblies A, B, C, D and J.
CLIN	FSC	NIIN	P/N	DESCRIPTION	EST. Annual QTY	UNIT PRICE	TOTAL PRICE
0011	2990	01-475-9360	110WPB259-005-P	Exhaust System, Engine	001	$ - 0	$ - 0
Port 18” Spray Ring Complete Assembly with Companion Flanges and Gakets. Manufactured in accordance with Work Item: 1 Exhaust Spray Rings, Manufacture and Coast Guard drawing 110WPB 259-005 Rev C dated 1/14/2002. In accordance with Note 9 assembly shall include assemblies A, B, C, D and H.
CLIN	FSC	NIIN	P/N	DESCRIPTION	EST. Annual QTY	UNIT PRICE	TOTAL PRICE
0012	4320	01-475-8806	110WPB259-006 ASSEMBLY C	Valve, Flapper, Pump	001	$ - 0	$ - 0
8” Butterfly Exhaust Flapper Valve Sub-Assemblies used on the 110’ WPB Class Coast Guard vessels. Port Side Configuration. Manufactured in accordance with USCG drawing 110WPB 259-006 Rev. D, Dated 3/25/2009 and Work Item 1: 8" Exhaust Flapper Valve, Manufacture. Valve encompasses assemblies B and C in accordance with General Note 13.
CLIN	FSC	NIIN	P/N	DESCRIPTION	EST. Annual QTY	UNIT PRICE	TOTAL PRICE
0013	4810	01-475-8648	110WPB259-006-P	Valve, Butterfly	004	$ - 0	$ - 0
8” Butterfly Exhaust Flapper Valve Complete Assembly for use on the Port side of Coast Guard 110’ WPB class cutters. Manufactured in accordance with Work Item 1: 8" Exhaust Flapper Valve, Manufacture and Coast Guard drawing 110WPB-259-006 Rev. D dated 3/25/2009. Encompasses Assemblies A, B, C, H and J - IAW General Note 12 on drawing.
CLIN	FSC	NIIN	P/N	DESCRIPTION	EST. Annual QTY	UNIT PRICE	TOTAL PRICE
0014	4810	01-475-8415	110WPB259-006-S	Valve, Butterfly	005	$ - 0	$ - 0
8” Butterfly Exhaust Flapper Valve, Complete Assembly for use on the Starboard side of Coast Guard 110’ WPB class cutters. Manufactured in accordance with Work Item 1: 8" Exhaust Flapper Valve, Manufacture and Coast Guard drawing 110WPB-259-006 Rev. D dated 3/25/2009. Encompasses Assemblies A, B, D, H and J - IAW General Note 12 on drawing.
CLIN	FSC	NIIN	P/N	DESCRIPTION	EST. Annual QTY	UNIT PRICE	TOTAL PRICE
0015	2990	01-475-9621	110WPB259-005 ASSEMBLY H	Spray Ring Assembly	004	$ - 0	$ - 0
Port 18” Spray Ring Sub-Assembly. Manufactured in accordance with Work Item: 1 Exhaust Spray Rings, Manufacture and drawing 110WPB 259-005 Rev. C dated 1/14/2002. IAW note 10, assembly includes Assemblies B, C and H. Does not include companion pipe flanges or hardware.
CLIN	FSC	NIIN	P/N	DESCRIPTION	EST. Annual QTY	UNIT PRICE	TOTAL PRICE
0016	2990	01-475-9620	110WPB 259-005 ASSEMBLY J	Spray Ring Assembly	005	$ - 0	$ - 0
Starboard 18" Spray Ring Sub-Assembly. Manufacture in accordance withWork Item: 1 Exhaust Spray Rings, Manufacture and drawing 110WPB 259-005 Rev. C 1/14/2002. IAW note 10, assembly includes Assemblies B, C and J. Does not include companion pipe flanges or hardware.
CLIN	FSC	NIIN	P/N	DESCRIPTION	EST. Annual QTY	UNIT PRICE	TOTAL PRICE
0017	5306	99-538-1451	P3665703-A	Bolt, Special Tiller	028	$ - 0	$ - 0
General - Manufacture IAW Drawing 110 WPB565-05 Rev. A dated 5/16/2002, PIECE #3, DETAIL 5-E.
Material Certification: ASTM A322 4340 heat treatment (Mechanical Property) "T". Heat to 830 deg. C - 860 Deg. C, hold until temperature is uniform throughout the section, soak for 10-15 minutes per 25mm section, quench in oil, water, or polymer as required. There is no requirement for coating or plating. There is no requirement for coding on bolts.Contractor shall provide certifications of material conformance to the Coast Guard QA Representative.
Welder Qualification – All welding if necessary shall be in accordance with Surface Forces Logistics Center Standard Specification 0740 (SFLC Std Spec 0740), 2012, Welding and Allied Processes.
Notifications & Inspections – The contractor shall be responsible for notifying the Contracting Officer no less then ten (10) calendar days prior to the contractor being ready for any Quality Assurance (Q.A.) inspections or testing required herein. Thirty (30) calendar days shall be allowed should the contract be awarded to a foreign contractor.
Inspections & Tests – The inspections & tests required herein are the minimum necessary and are not intended to replace any controls, examinations, or tests normally employed by the contractor to assure the quality of the product. The following will be witnessed by a Coast Guard Quality Assurance Representative at the Contractor's facility: a) Material Certifications as required upon request by the Coast Guard Quality Assurance Representative. b) Conformance to dimensional tolerances, surface texture and overall workmanship requirements. c) Overall assembly completeness as required by this statement of work and the drawing. d) Inspection of packaging, packing, marking and bar-coding.
Preservation, Packaging and Marking – Preservation, Packaging and Marking shall be conducted in accordance with USCG ELC SP-PP&M-001 Rev. D Dated 10/01/00.
Bar Coding – Each BOLT shall be Bar Coded in accordance with in accordance with ELC specification D-000-100 Rev. G Dated 2/23/06. The Bar Code Label can be applied separately or as part of the marking listed above.
Calibration System – The Contractor shall be required to maintain a test equipment calibration program in compliance with NCSL Z540-3. The program shall be documented and traceable to the National Institute of Standards (NIST). The calibration system records shall be maintained for inspection for the duration of any contract referencing this item.
CLIN	FSC	NIIN	P/N	DESCRIPTION	EST. Annual QTY	UNIT PRICE	TOTAL PRICE
0018	5342	01-481-8403	Anode, Propeller Nut	87WPB243-001	064	$ - 0	$ - 0
General - Manufacture IAW Drawing 87WPB-243-001 REV M dated 6/25/2004, ITEM #39. Item inside diameter to be machine finished to proper dimensions IAW drawing. Size of anode is 5.5" I.D. X 6.625" O.D. x 6.375" L.
Material Certification: Contractor shall provide certifications of material conformance to the Coast Guard QA Representative.
Welder Qualification – All welding if necessary shall be in accordance with Surface Forces Logistics Center Standard Specification 0740 (SFLC Std Spec 0740), 2012, Welding and Allied Processes.
Notifications & Inspections – The contractor shall be responsible for notifying the Contracting Officer no less then ten (10) calendar days prior to the contractor being ready for any Quality Assurance (Q.A.) inspections or testing required herein. Thirty (30) calendar days shall be allowed should the contract be awarded to a foreign contractor.
Inspections & Tests – The inspections & tests required herein are the minimum necessary and are not intended to replace any controls, examinations, or tests normally employed by the contractor to assure the quality of the product. The following will be witnessed by a Coast Guard Quality Assurance Representative at the Contractor's facility: a) Material Certifications as required upon request by the Coast Guard Quality Assurance Representative. b) Conformance to dimensional tolerances, surface texture and overall workmanship requirements. c) Overall assembly completeness as required by this statement of work and the drawing. d) Inspection of packaging, packing, marking and bar-coding.
Preservation, Packaging and Marking – Preservation, Packaging and Marking shall be conducted in accordance with USCG ELC SP-PP&M-001 Rev. D Dated 10/01/00.
Bar Coding – Each ANODE shall be Bar Coded in accordance with in accordance with ELC specification D-000-100 Rev. G Dated 2/23/06. The Bar Code Label can be applied separately or as part of the marking listed above.
Calibration System – The Contractor shall be required to maintain a test equipment calibration program in compliance with NCSL Z540-3. The program shall be documented and traceable to the National Institute of Standards (NIST). The calibration system records shall be maintained for inspection for the duration of any contract referencing this item.
CLIN	FSC	NIIN	P/N	DESCRIPTION	EST. Annual QTY	UNIT PRICE	TOTAL PRICE
0019	2010	01-458-9217	Nut , Bronze	87WPB243-001 ITEM 2	020	$ - 0	$ - 0
General - Manufacture In accordance with Drawing 87WPB 243-001 REV. "M" dated 6/25/2004. B.O.M. Item Number 2.
Material Certification: Contractor shall provide certifications of material conformance to the Coast Guard Quality Assurance Representative.
Welder Qualification – All welding if necessary shall be in accordance with Surface Forces Logistics Center Standard Specification 0740 (SFLC Std Spec 0740), 2012, Welding and Allied Processes.
Notifications & Inspections – The contractor shall be responsible for notifying the Contracting Officer no less then ten (10) calendar days prior to the contractor being ready for any Quality Assurance (Q.A.) inspections or testing required herein. Thirty (30) calendar days shall be allowed should the contract be awarded to a foreign contractor.
Inspections & Tests – The inspections & tests required herein are the minimum necessary and are not intended to replace any controls, examinations, or tests normally employed by the contractor to assure the quality of the product. The following will be witnessed by a Coast Guard Quality Assurance Representative at the Contractor's facility: a) Material Certifications as required upon request by the Coast Guard Quality Assurance Representative. b) Conformance to dimensional tolerances, surface texture and overall workmanship requirements. c) Overall assembly completeness as required by this statement of work and the drawing. d) Inspection of packaging, packing, marking and bar-coding.
Preservation, Packaging and Marking – Preservation, Packaging and Marking shall be conducted in accordance with USCG ELC SP-PP&M-001 Rev. D Dated 10/01/00.
Bar Coding – Each NUT, BRONZE shall be Bar Coded in accordance with in accordance with SFLC specification D-000-100 Rev. G Dated 2/23/06. The Bar Code Label can be applied separately or as part of the marking listed above.
Calibration System – The Contractor shall be required to maintain a test equipment calibration program in compliance with NCSL Z540-3. The program shall be documented and traceable to the National Institute of Standards (NIST). The calibration system records shall be maintained for inspection for the duration of any contract referencing this item.
CLIN	FSC	NIIN	P/N	DESCRIPTION	EST. Annual QTY	UNIT PRICE	TOTAL PRICE
0020	5310	01-458-9125	Nut, Hex, Self Locking	87WPB243-001 ITEM 3	025	$ - 0	$ - 0
General - Manufactured IAW Coast Guard Drawing 87WPB 243-001 REVISION "M" dated 6/25/2004. B.O.M. Item Number 3.
Material Certification: Contractor shall provide certifications of material conformance to the Coast Guard Quality Assurance Representative.
Welder Qualification – All welding if necessary shall be in accordance with Surface Forces Logistics Center Standard Specification 0740 (SFLC Std Spec 0740), 2012, Welding and Allied Processes.
Notifications & Inspections – The contractor shall be responsible for notifying the Contracting Officer no less then ten (10) calendar days prior to the contractor being ready for any Quality Assurance (Q.A.) inspections or testing required herein. Thirty (30) calendar days shall be allowed should the contract be awarded to a foreign contractor.
Inspections & Tests – The inspections & tests required herein are the minimum necessary and are not intended to replace any controls, examinations, or tests normally employed by the contractor to assure the quality of the product. The following will be witnessed by a Coast Guard Quality Assurance Representative at the Contractor's facility: a) Material Certifications as required upon request by the Coast Guard Quality Assurance Representative. b) Conformance to dimensional tolerances, surface texture and overall workmanship requirements. c) Overall assembly completeness as required by this statement of work and the drawing. d) Inspection of packaging, packing, marking and bar-coding.
Preservation, Packaging and Marking – Preservation, Packaging and Marking shall be conducted in accordance with USCG ELC SP-PP&M-001 Rev. D Dated 10/01/00.
Bar Coding – Each NUT, HEX shall be Bar Coded in accordance with in accordance with SFLC specification D-000-100 Rev. G Dated 2/23/06. The Bar Code Label can be applied separately or as part of the marking listed above.
Calibration System – The Contractor shall be required to maintain a test equipment calibration program in compliance with NCSL Z540-3. The program shall be documented and traceable to the National Institute of Standards (NIST). The calibration system records shall be maintained for inspection for the duration of any contract referencing this item.
CLIN	FSC	NIIN	P/N	DESCRIPTION	EST. Annual QTY	UNIT PRICE	TOTAL PRICE
0021	4320	01-475-8677	110WPB259-006 ASSEMBLY D	Valve, Flapper, Pump	001	$ - 0	$ - 0
8” Butterfly Exhaust Flapper Valve Sub-Assembly used on the 110’ WPB class Coast Guard vessels. Manufactured in accordance with USCG drawing 110WPB 259-006 Rev. D, Dated 3/25/2009 and Work Item 1: 8" Exhaust Flapper Valve, Manufacture. Valve encompasses assemblies B and D in accordance with General Note 13 on drawing.
CLIN	FSC	NIIN	P/N	DESCRIPTION	EST. Annual QTY	UNIT PRICE	TOTAL PRICE
0022	3130	01-F11-2200	87WPB 243-001 Piece 14	Aft Bearing Carrier	030	$ - 0	$ - 0
General - 87 WPB Aft Bearing Carrier manufactured in accordance with drawing 87WPB 243-001 Rev.M B.O.M.Dated 6/25/04 Piece 14.
Material Certification: Material - ASTM A511, MT 316 or 316L. Contractor shall provide certifications of material conformance to the Coast Guard QA Representative.
Notifications & Inspections – The contractor shall be responsible for notifying the Contracting Officer no less then ten (10) calendar days prior to the contractor being ready for any Quality Assurance (Q.A.) inspections or testing required herein.
Inspections & Tests – The inspections & tests required herein are the minimum necessary and are not intended to replace any controls, examinations, or tests normally employed by the contractor to assure the quality of the product. The following will be witnessed by a CG Quality Assurance Representative: a) Material Certifications as required upon request by the Coast Guard Quality Assurance Representative. b) Conformance to dimensional tolerances, surface texture and overall workmanship requirements. c) Inspection of packaging and marking.
Preservation, Packaging and Marking – Preservation, Packaging and Marking shall be conducted in accordance with USCG ELC SP-PP&M-001 Rev. D Dated 10/01/00. Packaging shall be a wooden box constructed of 3/4" plywood. No plywood alternates will be allowed i.e. OSB, particle board, flake board etc. Box lid shall be secured with corrosion resistent wood screws.
Bar Coding – Each Bearing Carrier shall be Bar Coded in accordance with in accordance with SFLC specification D-000-100 Rev. G Dated 2/23/06. The Bar Code Label can be applied separately or as part of the marking listed above.
Calibration System – The Contractor shall be required to maintain a test equipment calibration program in compliance with NCSL Z540-3. The program shall be documented and traceable to the National Institute of Standards (NIST). The calibration system records shall be maintained for inspection for the duration of any contract referencing this item.
CLIN	FSC	NIIN	P/N	DESCRIPTION	EST. Annual QTY	UNIT PRICE	TOTAL PRICE
0023	3130	01-F11-2388	87WPB 243-001 Piece 17	Mid Bearing carrier	032	$ - 0	$ - 0
General - 87 WPB Aft Bearing Carrier manufactured in accordance with drawing 87WPB 243-001 Rev.M B.O.M.Dated 6/25/04 Piece 17.
Material Certification: Material - ASTM A511, MT 316 or 316L. Contractor shall provide certifications of material conformance to the Coast Guard QA Representative.
Notifications & Inspections – The contractor shall be responsible for notifying the Contracting Officer no less then ten (10) calendar days prior to the contractor being ready for any Quality Assurance (Q.A.) inspections or testing required herein.
Inspections & Tests – The inspections & tests required herein are the minimum necessary and are not intended to replace any controls, examinations, or tests normally employed by the contractor to assure the quality of the product. The following will be witnessed by a CG Quality Assurance Representative: a) Material Certifications as required upon request by the Coast Guard Quality Assurance Representative. b) Conformance to dimensional tolerances, surface texture and overall workmanship requirements. c) Inspection of packaging and marking.
Preservation, Packaging and Marking – Preservation, Packaging and Marking shall be conducted in accordance with USCG ELC SP-PP&M-001 Rev. D Dated 10/01/00. Packaging shall be a wooden box constructed of 3/4" plywood. No plywood alternates will be allowed i.e. OSB, particle board, flake board etc. Box lid shall be secured with corrosion resistent wood screws.
Bar Coding – Each Bearing Carrier shall be Bar Coded in accordance with in accordance with SFLC specification D-000-100 Rev. G Dated 2/23/06. The Bar Code Label can be applied separately or as part of the marking listed above.
Calibration System – The Contractor shall be required to maintain a test equipment calibration program in compliance with NCSL Z540-3. The program shall be documented and traceable to the National Institute of Standards (NIST). The calibration system records shall be maintained for inspection for the duration of any contract referencing this item.
Bar Coding – Each Bearing Carrier shall be Bar Coded in accordance with in accordance with SFLC specification D-000-100 Rev. G Dated 2/23/06. The Bar Code Label can be applied separately or as part of the marking listed above. Each Flange shall be de-burred to remove all sharp edges.
Calibration System – The Contractor shall be required to maintain a test equipment calibration program in compliance with NCSL Z540-3. The program shall be documented and traceable to the National Institute of Standards (NIST). The calibration system records shall be maintained for inspection for the duration of any contract referencing this item.
Warranty - Standard manufacturer's warranty applies to all the items listed in this requirement.

&C&14BPA ITEMS FOR MANUFACTURE BASE YEAR

1st Opt.

CLIN	FSC	NIIN	P/N	DESCRIPTION	EST. Annual QTY	UNIT PRICE	TOTAL PRICE
1001	2990	01-460-0214	110WPB259-005 ASSY D	Flange Exhaust Pipe 18"	001	$ - 0	$ - 0
General - 18" Lower Companion Pipe Flange manufactured in accordance with drawing 110WPB 259-005 Rev. C Dated 1/14/02 Assembly D.
Material Certification: Contractor shall provide certifications of material conformance to the Coast Guard QA Representative.
Flange Sealing Surfaces: All flanged sealing surfaces shall be machined to obtain a spiral serrated gasket surface finish (phonographic finish). As a general rule, a 1/16" radius round-nosed tool at a feed of 1/32" for flanges 12" diameter and smaller. Sizes larger than 12" diameter an 1/16” radius round-nosed tool at a feed of 0.050” for flanges over 12” diameter shall be used.
Welder Qualification – All welding if necessary shall be in accordance with Surface Forces Logistics Center Standard Specification 0740 (SFLC Std Spec 0740), 2012, Welding and Allied Processes.
Notifications & Inspections – The contractor shall be responsible for notifying the Contracting Officer no less then ten (10) calendar days prior to the contractor being ready for any Quality Assurance (Q.A.) inspections or testing required herein. Thirty (30) calendar days shall be allowed should the contract be awarded to a foreign contractor.
Inspections & Tests – The inspections & tests required herein are the minimum necessary and are not intended to replace any controls, examinations, or tests normally employed by the contractor to assure the quality of the product. The following will be witnessed by a CG Quality Assurance Representative: a) Material Certifications as required upon request by the Coast Guard Quality Assurance Representative. b) Conformance to dimensional tolerances, surface texture and overall workmanship requirements. c) Overall assembly completeness as required by this statement of work and the drawing. d) Inspection of packaging and marking.
Preservation, Packaging and Marking – Preservation, Packaging and Marking shall be conducted in accordance with USCG ELC SP-PP&M-001 Rev. D Dated 10/01/00.
Bar Coding – Each Flange shall be Bar Coded in accordance with in accordance with SFLC specification D-000-100 Rev. G Dated 2/23/06. The Bar Code Label can be applied separately or as part of the marking listed above.
Calibration System – The Contractor shall be required to maintain a test equipment calibration program in compliance with NCSL Z540-3. The program shall be documented and traceable to the National Institute of Standards (NIST). The calibration system records shall be maintained for inspection for the duration of any contract referencing this item.
CLIN	FSC	NIIN	P/N	DESCRIPTION	EST. Annual QTY	UNIT PRICE	TOTAL PRICE
1002	2990	01-475-9800	110WPB259-006 ASSY A	Flange, Exhaust Pipe 8"	001	$ - 0	$ - 0
General - 8" Companion Pipe Flange manufactured in accordance with drawing 110WPB 259-006 Rev. D Dated 3/25/09 Assembly A.
Material Certification: Contractor shall provide certifications of material conformance to the Coast Guard QA Representative.
Flange Sealing Surfaces: All flanged sealing surfaces shall be machined to obtain a spiral serrated gasket surface finish (phonographic finish). As a general rule, a 1/16" radius round-nosed tool at a feed of 1/32" for flanges 12" diameter and smaller. Sizes larger than 12" diameter an 1/16” radius round-nosed tool at a feed of 0.050” for flanges over 12” diameter shall be used.
Welder Qualification – All welding if necessary shall be in accordance with Surface Forces Logistics Center Standard Specification 0740 (SFLC Std Spec 0740), 2012, Welding and Allied Processes.
Notifications & Inspections – The contractor shall be responsible for notifying the Contracting Officer no less then ten (10) calendar days prior to the contractor being ready for any Quality Assurance (Q.A.) inspections or testing required herein. Thirty (30) calendar days shall be allowed should the contract be awarded to a foreign contractor.
Inspections & Tests – The inspections & tests required herein are the minimum necessary and are not intended to replace any controls, examinations, or tests normally employed by the contractor to assure the quality of the product. The following will be witnessed by a CG Quality Assurance Representative: a) Material Certifications are required upon request by the Coast Guard Quality Assurance Representative. b) Conformance to dimensional tolerances, surface texture and overall workmanship requirements. c) Overall assembly completeness as required by this statement of work and the drawing. d) Inspection of packaging and marking.
Preservation, Packaging and Marking – Preservation, Packaging and Marking shall be conducted in accordance with USCG ELC SP-PP&M-001 Rev. D Dated 10/01/00.
Bar Coding – Each Flange shall be Bar Coded in accordance with in accordance with SFLC specification D-000-100 Rev. G Dated 2/23/06. The Bar Code Label can be applied separately or as part of the marking listed above. Each Flange shall be de-burred to remove all sharp edges.
Calibration System – The Contractor shall be required to maintain a test equipment calibration program in compliance with NCSL Z540-3. The program shall be documented and traceable to the National Institute of Standards (NIST). The calibration system records shall be maintained for inspection for the duration of any contract referencing this item.
CLIN	FSC	NIIN	P/N	DESCRIPTION	EST. Annual QTY	UNIT PRICE	TOTAL PRICE
1003	2990	01-460-0205	110WPB259-005 ASSY A	Flange Exhaust Pipe 18"	001	$ - 0	$ - 0
General – Manufactured in accordance with drawing 110WPB 259-005 Rev. C Dated 1/14/02 Assembly D.
Material Certification: Contractor shall provide certifications of material conformance to the Coast Guard QA Representative.
Flange Sealing Surfaces: All flanged sealing surfaces shall be machined to obtain a spiral serrated gasket surface finish (phonographic finish). As a general rule, a 1/16" radius round-nosed tool at a feed of 1/32" for flanges 12" diameter and smaller. Sizes larger than 12" diameter an 1/16” radius round-nosed tool at a feed of 0.050” for flanges over 12” diameter shall be used.
Welder Qualification – All welding if necessary shall be in accordance with Surface Forces Logistics Center Standard Specification 0740 (SFLC Std Spec 0740), 2012, Welding and Allied Processes.
Notifications & Inspections – The contractor shall be responsible for notifying the Contracting Officer no less then ten (10) calendar days prior to the contractor being ready for any Quality Assurance (Q.A.) inspections or testing required herein. Thirty (30) calendar days shall be allowed should the contract be awarded to a foreign contractor.
Inspections & Tests – The inspections & tests required herein are the minimum necessary and are not intended to replace any controls, examinations, or tests normally employed by the contractor to assure the quality of the product. The following will be witnessed by a CG Quality Assurance Representative: a) Material Certifications as required upon request by the Coast Guard Quality Assurance Representative. b) Conformance to dimensional tolerances, surface texture and overall workmanship requirements. c) Overall assembly completeness as required by this statement of work and the drawing. d) Inspection of packaging and marking.
Preservation, Packaging and Marking – Preservation, Packaging and Marking shall be conducted in accordance with USCG ELC SP-PP&M-001 Rev. D Dated 10/01/00.
Bar Coding – Each Flange shall be Bar Coded in accordance with in accordance with SFLC specification D-000-100 Rev. G Dated 2/23/06. The Bar Code Label can be applied separately or as part of the marking listed above. Each Flange shall be de-burred to remove all sharp edges.
Calibration System – The Contractor shall be required to maintain a test equipment calibration program in compliance with NCSL Z540-3. The program shall be documented and traceable to the National Institute of Standards (NIST). The calibration system records shall be maintained for inspection for the duration of any contract referencing this item.
CLIN	FSC	NIIN	P/N	DESCRIPTION	EST. Annual QTY	UNIT PRICE	TOTAL PRICE
1004	4810	01-475-7855	110CWPB259-003-S	Valve, Flapper Assembly	001	$ - 0	$ - 0
Butterfly Type Exhaust (Flapper) Valve, 18" Diameter, with electric actuator & solenoid limit (open/close) switches. Manufactured in accordance with Coast Guard drawing 110C WPB 259-003 Rev. E Dated 5/06/2004 and specification no. P-259-0415 Rev. F Dated 7/14/2009. For Starboard side application.
CLIN	FSC	NIIN	P/N	DESCRIPTION	EST. Annual QTY	UNIT PRICE	TOTAL PRICE
1005	4810	01-475-8271	110CWPB259-003-P	Flapper Valve Assembly	001	$ - 0	$ - 0
Butterfly Type Exhaust (Flapper) Valve, 18” Diameter with electric actuator and solenoid limit (open/close) switches. Manufactured in accordance with Coast Guard drawing 110CWPB 259-003 Rev. E dated 5/06/2004 and specification P-259-0415 Rev. "G" Dated 2/3/2014. For Port side application.
CLIN	FSC	NIIN	P/N	DESCRIPTION	EST. Annual QTY	UNIT PRICE	TOTAL PRICE
1006	4320	01-475-8280	110WPB259-003 ASSEMBLY H	Valve, Flapper	001	$ - 0	$ - 0
Butterfly valve and spray ring assembly for port side application on Coast Guard 110' WPB "C" Class cutters. manufactured, tested, packaged, packed and marked in accordance with Coast Guard drawing 110CWPB 259-003 Rev. E Dated 5/06/2004, assembly "H" and Coast Guard specification P-259-0414 Rev. "F" Dated 1/31/2014. Includes upper and lower gaskets, (2) each.
CLIN	FSC	NIIN	P/N	DESCRIPTION	EST. Annual QTY	UNIT PRICE	TOTAL PRICE
1007	4320	01-475-7884	110WPB259-003 ASSEMBLY J	Valve, Flapper	001	$ - 0	$ - 0
Butterfly valve and spray ring assembly for starboard side application on Coast Guard 110' WPB Class cutters. Manufactured in accordance with Coast Guard drawing 110C WPB 259-003 Rev. E, Dated 5/06/2004 and Coast Guard specification P-259-0414 Rev. "F" Dated 1/31/2014. Assemblies "B", "C" AND "J" in accordance with general note 14 on drawing will complete each assembly.
CLIN	FSC	NIIN	P/N	DESCRIPTION	EST. Annual QTY	UNIT PRICE	TOTAL PRICE
1008	3130	01-442-2863	5686719	Housing, Bearing Unit, FWD	006	$ - 0	$ - 0
Manufacture, Inspect, Package and Mark Bearing Housing IAW attached specification P-161-0417 Rev. "C", dated 2/11/2014. Final assembly shall include items 2, 8, 9 and 26 IAW drawing 110CWPB-161-005 Rev. G Dated 03/08/2013.
CLIN	FSC	NIIN	P/N	DESCRIPTION	EST. Annual QTY	UNIT PRICE	TOTAL PRICE
1009	2040	01-486-7595	110WPB-513-005	Ventillator, Air Circulation	003	$ - 0	$ - 0
Lever operated louvered vent that opens and closes. Manufactured IAW Coast Guard drawing 110 WPB-513-005 Rev. C dated 1/14/2002 and manufacturing specification P-513-0486 Rev. "A" dated 3/19/2014.
CLIN	FSC	NIIN	P/N	DESCRIPTION	EST. Annual QTY	UNIT PRICE	TOTAL PRICE
1010	2990	01-475-9354	110WPB259-005-S	Exhaust System, Engine	1	$ - 0	$ - 0
Starboard 18” Spray Ring Assembly. Manufactured in accordance with Coast Guard specification P-259-0472 Rev. "C" dated 3/20/2014 and Coast Guard drawing 110WPB 259-005 Rev. C 1/14/2002. In accordance with Note 9 assembly shall include assemblies A, B, C, D and J.
CLIN	FSC	NIIN	P/N	DESCRIPTION	EST. Annual QTY	UNIT PRICE	TOTAL PRICE
1011	2990	01-475-9360	110WPB259-005-P	Exhaust System, Engine	001	$ - 0	$ - 0
Port 18” Spray Ring Assembly. Manufactured in accordance with Coast Guard specification P-259-0472 Rev. "C" dated 3/20/2014 and Coast Guard drawing 110WPB 259-005 Rev C dated 1/14/2002. In accordance with Note 9 assembly shall include assemblies A, B, C, D and H.
CLIN	FSC	NIIN	P/N	DESCRIPTION	EST. Annual QTY	UNIT PRICE	TOTAL PRICE
1012	4320	01-475-8806	110WPB259-006 ASSEMBLY C	Valve, Flapper, Pump	001	$ - 0	$ - 0
Flapper Valve Assembly used on the 8” Butterfly Exhaust Valves on the 110’ WPB A, B, and C Class Coast Guard vessels. Manufactured in accordance with USCG drawing 110WPB 259-006 Rev. D, Dated 3/25/2009 and ELC Specification P-259-0438 Rev. "D" dated 2/12/2014. Valve encompasses assemblies B and C in accordance with General Note 13.
CLIN	FSC	NIIN	P/N	DESCRIPTION	EST. Annual QTY	UNIT PRICE	TOTAL PRICE
1013	4810	01-475-8648	110WPB259-006-P	Valve, Butterfly	004	$ - 0	$ - 0
8” Butterfly Exhaust Valve for use on the Port side of Coast Guard 110’ WPB A, B, and C class cutters. Manufactured in accordance with Coast Guard specification P-259-0437 Rev. "C" dated 2/12/2014 and Coast Guard drawing 110WPB-259-006 Rev. D dated 3/25/2009.
CLIN	FSC	NIIN	P/N	DESCRIPTION	EST. Annual QTY	UNIT PRICE	TOTAL PRICE
1014	4810	01-475-8415	110WPB259-006-S	Valve, Butterfly	005	$ - 0	$ - 0
8” Butterfly Exhaust Valve for use on the Starboard side of Coast Guard 110’ WPB A, B, and C class cutters. Manufactured in accordance with Coast Guard specification P-259-0437 Rev. D Change 1 Dated 7/20/2009 and Coast Guard drawing 110WPB-259-006 Rev. D dated 3/25/2009.
CLIN	FSC	NIIN	P/N	DESCRIPTION	EST. Annual QTY	UNIT PRICE	TOTAL PRICE
1015	2990	01-475-9621	110WPB259-005 ASSEMBLY H	Spray Ring Assembly	004	$ - 0	$ - 0
Port 18” Spray Ring Assembly. Manufactured in accordance with Coast Guard specification P-259-0441 Rev. "C" dated 3/20/2014 and drawing 110WPB 259-005 Rev. C dated 1/14/2002. IAW note 10, assembly includes Assemblies B, C and H. Does not include companion pipe flanges or hardware
CLIN	FSC	NIIN	P/N	DESCRIPTION	EST. Annual QTY	UNIT PRICE	TOTAL PRICE
1016	2990	01-475-9620	110WPB 259-005 ASSEMBLY J	Spray Ring Assembly	005	$ - 0	$ - 0
Starboard 18" Spray Ring Assembly. Manufacture in accordance with Coast Guard specification P-259-0441 Rev. "C" dated 3/20/2014 and drawing 110WPB 259-005 Rev. C 1/14/2002. IAW note 10, assembly includes Assemblies B, C and J. Does not include companion pipe flanges or hardware.
CLIN	FSC	NIIN	P/N	DESCRIPTION	EST. Annual QTY	UNIT PRICE	TOTAL PRICE
1017	5306	99-538-1451	Bolt, Special Tiller	P3665703-A	028	$ - 0	$ - 0
General - Manufacture IAW Drawing 110 WPB565-05 Rev. A dated 5/16/2002, PIECE #3, DETAIL 5-E.
Material Certification: ASTM A322 4340 heat treatment (Mechanical Property) "T". Heat to 830 deg. C - 860 Deg. C, hold until temperature is uniform throughout the section, soak for 10-15 minutes per 25mm section, quench in oil, water, or polymer as required. There is no requirement for coating or plating. There is no requirement for coding on bolts.Contractor shall provide certifications of material conformance to the Coast Guard QA Representative.
Welder Qualification – All welding if necessary shall be in accordance with Surface Forces Logistics Center Standard Specification 0740 (SFLC Std Spec 0740), 2012, Welding and Allied Processes.
Notifications & Inspections – The contractor shall be responsible for notifying the Contracting Officer no less then ten (10) calendar days prior to the contractor being ready for any Quality Assurance (Q.A.) inspections or testing required herein. Thirty (30) calendar days shall be allowed should the contract be awarded to a foreign contractor.
Inspections & Tests – The inspections & tests required herein are the minimum necessary and are not intended to replace any controls, examinations, or tests normally employed by the contractor to assure the quality of the product. The following will be witnessed by a Coast Guard Quality Assurance Representative at the Contractor's facility: a) Material Certifications as required upon request by the Coast Guard Quality Assurance Representative. b) Conformance to dimensional tolerances, surface texture and overall workmanship requirements. c) Overall assembly completeness as required by this statement of work and the drawing. d) Inspection of packaging, packing, marking and bar-coding.
Preservation, Packaging and Marking – Preservation, Packaging and Marking shall be conducted in accordance with USCG ELC SP-PP&M-001 Rev. D Dated 10/01/00.
Bar Coding – Each BOLT shall be Bar Coded in accordance with in accordance with ELC specification D-000-100 Rev. G Dated 2/23/06. The Bar Code Label can be applied separately or as part of the marking listed above.
Calibration System – The Contractor shall be required to maintain a test equipment calibration program in compliance with NCSL Z540-3. The program shall be documented and traceable to the National Institute of Standards (NIST). The calibration system records shall be maintained for inspection for the duration of any contract referencing this item.
CLIN	FSC	NIIN	P/N	DESCRIPTION	EST. Annual QTY	UNIT PRICE	TOTAL PRICE
1018	5342	01-481-8403	Anode, Propeller Nut	87WPB243-001	064	$ - 0	$ - 0
General - Manufacture IAW Drawing 87WPB-243-001 REV M dated 6/25/2004, ITEM #39. Item inside diameter to be machine finished to proper dimensions IAW drawing. Size of anode is 5.5" I.D. X 6.625" O.D. x 6.375" L.
Material Certification: Contractor shall provide certifications of material conformance to the Coast Guard QA Representative.
Welder Qualification – All welding if necessary shall be in accordance with Surface Forces Logistics Center Standard Specification 0740 (SFLC Std Spec 0740), 2012, Welding and Allied Processes.
Notifications & Inspections – The contractor shall be responsible for notifying the Contracting Officer no less then ten (10) calendar days prior to the contractor being ready for any Quality Assurance (Q.A.) inspections or testing required herein. Thirty (30) calendar days shall be allowed should the contract be awarded to a foreign contractor.
Inspections & Tests – The inspections & tests required herein are the minimum necessary and are not intended to replace any controls, examinations, or tests normally employed by the contractor to assure the quality of the product. The following will be witnessed by a Coast Guard Quality Assurance Representative at the Contractor's facility: a) Material Certifications as required upon request by the Coast Guard Quality Assurance Representative. b) Conformance to dimensional tolerances, surface texture and overall workmanship requirements. c) Overall assembly completeness as required by this statement of work and the drawing. d) Inspection of packaging, packing, marking and bar-coding.
Preservation, Packaging and Marking – Preservation, Packaging and Marking shall be conducted in accordance with USCG ELC SP-PP&M-001 Rev. D Dated 10/01/00.
Bar Coding – Each ANODE shall be Bar Coded in accordance with in accordance with ELC specification D-000-100 Rev. G Dated 2/23/06. The Bar Code Label can be applied separately or as part of the marking listed above.
Calibration System – The Contractor shall be required to maintain a test equipment calibration program in compliance with NCSL Z540-3. The program shall be documented and traceable to the National Institute of Standards (NIST). The calibration system records shall be maintained for inspection for the duration of any contract referencing this item.
CLIN	FSC	NIIN	P/N	DESCRIPTION	EST. Annual QTY	UNIT PRICE	TOTAL PRICE
1019	2010	01-458-9217	Nut , Bronze	87WPB243-001 ITEM 2	020	$ - 0	$ - 0
General - Manufacture In accordance with Drawing 87WPB 243-001 REV. "M" dated 6/25/2004. B.O.M. Item Number 2.

This is the start of the file's text. The full file is on GovTribe.

File details come from the government source that posted it.