SOW_JT678_Seward_Replace_Gate_Operator_Mustang_Support_Facility.pdf

2119879PJT678

STATEMENT OF WORK

PN 12976011 Seward Replace Gate Operator Mustang Support Facility

PART 1 - GENERAL

1.1 PROJECT INTENT: Replace electric gate operator located at USCG Cutter Mustang Support Facility in order to return gate to normal operation.

1.2 GENERAL REQUIREMENTS: The Contractor shall complete all work within 60 calendar days from the notice to proceed. Work must be completed in accordance with National Electric Code. Contractor is responsible for complying with all local, state and federal regulations. All work practices must meet or exceed OSHA Safety Requirements

1.3 SCOPE: This project is to provide all materials, equipment, labor, and supervision, to install a complete and functional electric remote operated gate opener. Replace Liftmaster SL585 Slide gate operator, 1HP or larger motor, Heater kit, monitored reflective photo eye, monitored resistive edge 5ft.

1.3.1 SHIPPING: Provide all transportation of material to Seward Alaska:

U.S. Coast Guard Seward Moorings (CGC MUSTANG)

Fourth Avenue and North Harbor Street Seward, Alaska 99664

1.3.1 TESTING: Complete successful gate operation witnessed by USCG representative.

1.3.2 DISPOSAL: All removed materials shall be disposed of and or recycled off site. Contractor is responsible for transport of all materials in accordance with local, state and federal environmental and transportation laws.

1.4 SITE CONDITIONS: All components and connections must be protected and resistant to marine environment and weather to include snow.

1.5 RESTRICTIONS:

1.5.1 All work must be coordinated to provide adequate notice to Contracting Officers Representative; Thomas Logan CWO3 907-942-7562

1.5.2 Working hours are from 0800 to 1530 unless previously approved by LTJG Robert Bernardi w: (907) 224-5202 (Ext 2224)

ATTATCHMENTS:

1.6.1 None:

*** END OF SECTION***