TAB 04 STATEMENT OF WORK.pdf

PDF 201 KB Posted

Attached to
REPAIR LIGHT EXT
Solicitation number
70Z03827QL0000030
Issued by

About this file

STATEMENT OF WORK (SOW) PR# 6316-CD03

This is a Statement of Work defining contractor requirements for repair and overhaul services on United States Coast Guard (USCG) equipment. The requirement covers repair services for one Light Exterior component (NSN 6220-01-305-9658, Part Number 10-1156-3) with a quantity of three units. The contractor must be an Original Equipment Manufacturer (OEM), OEM Authorized Repair Center, or FAA Certified 145 Repair Center acceptable to the Coast Guard and must comply with all applicable OEM specifications, Component Maintenance Manuals (CMM), Service Bulletins, Overhaul and Repair Instructions, and OEM technical specifications current at time of contract award. The contractor shall be ISO 9000 compliant or maintain a quality system acceptable to USCG.

The work encompasses two primary levels of repair: (1) Inspect/Repair as necessary, consisting of inspection, failure analysis, defective part replacement, and testing to meet OEM functional requirements; and (2) Overhaul, consisting of complete teardown, inspection, cleaning, replacement of all consumables and OEM-recommended components, with zeroing of Time Since Overhaul. All OEM drawings, Service Bulletins, and Component Maintenance Manuals must be obtained by the contractor. The contractor must complete a Teardown and Inspection Report (TIR) within five calendar days identifying all parts requiring repair or replacement, including part numbers, nomenclature, unit prices, and labor hours. The required turn-around-time is ninety (90) days after receipt of material, with earlier delivery desired if achievable without additional government charges. All components must be thoroughly cleaned per applicable CMMs and must be free of hazardous dust including hexavalent chromium, cadmium, and lead prior to return to the Aviation Logistics Center. The contractor must provide an EASA Form-1 Certificate of Airworthiness or Certificate of Conformance as proof of traceability, testing, repair, and/or overhaul, signed by an authorized official representing the approved repair station. All packaging and preservation shall comply with CMM requirements, with specific requirements for Electrostatic Discharge Sensitive (ESDS) components and adherence to Air Transport Association specification ATA-300. Final inspection and acceptance will be performed by Aviation Logistics Center quality assurance personnel to verify compliance with all contract requirements and latest drawings, specifications, and CMMs.

View the file

Other files

File Type Posted
TAB 07 WAGE DETERMINATION.pdf PDF
TAB 04 J an A Redacted.pdf PDF
Terms and Conditions - Sole Source Repair.pdf PDF

On GovTribe

Work with this file

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file

File details come from the government source that posted it. Updated .