Attachment 2 - Facility Definitions - 70Z03826IH0000013.pdf
PDF 185 KB Posted
- Attached to
- Overhaul of Gas Turbine Engines (APU)
- Solicitation number
- 70Z03826IH0000013
About this file
This is an attachment detailing facility certification requirements for a federal contract opportunity (70Z03826IH0000013). The document establishes three distinct pathways for contractors to demonstrate their qualifications to perform repair and overhaul services.
For FAA-Certified Facilities, contractors must submit their FAA repair station certificate. Contractors holding a limited rating must additionally provide a capabilities list identifying relevant part numbers from the schedule of services in compliance with 14 CFR 145.215, and a self-evaluation confirming that the repair station possesses all necessary housing, facilities, equipment, materials, technical data, processes, and trained personnel to perform the work. The Contracting Officer may request copies of the repair station manual and quality control manual. For OEM-Certified Facilities, contractors must submit OEM documentation specifically identifying the part numbers on the Schedule, or alternatively provide an OEM point of contact to allow independent verification of certification. For DoD or USCG-Certified Facilities, contractors must provide a signed repair source approval memo confirming approval to repair the components listed on the Schedule. These requirements apply to contract 70Z03826IH0000013 and establish clear standards for facility qualification across multiple certification pathways.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| Attachment 1 - List of Components - 70Z03826IH0000013.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Attachment 2 – Facility Definitions – 70Z03826IH0000013
FAA-Certified Facility
To demonstrate that the Contractor is properly certified by the FAA, the Contractor must submit their repair station certificate. If the Contractor holds a limited rating, the Contractor must also submit: 1) a capabilities list identifying the relevant part numbers specified on the schedule of services IAW 14 CFR 145.215, and 2) a self-evaluation affirming that the repair station has all of the housing, facilities, equipment, material, technical data, processes, and trained personnel in place to perform the work on the articles identified in the schedule of services IAW 14 CFR
145.215. At the request of the Contracting Officer, the Contractor may be required to submit a copy of the repair station manual and quality control manual.
OEM Certified Facility
To demonstrate that the Contractor is certified by the OEM, the Contractor must submit documentation from the OEM stating that the Contractor is certified to perform the services required herein. This documentation must specifically identify the part numbers identified in the Schedule. Otherwise, the Contractor must provide an OEM point of contact that will allow the USCG to independently verify the Contractor is, in fact, certified by the OEM to repair the components listed on the Schedule.
DoD or USCG Certified Facility
To demonstrate that the Contractor is certified by a DoD service or the USCG to perform overhaul services on the components listed on the Schedule, the Contractor must provide a signed repair source approval memo indicating the Contractor is approved to repair the components listed on the Schedule.
File details come from the government source that posted it. Updated .