STATEMENT_OF_WORK-_REPAIR_OF_6_SCISSOR_LIFTS.docx

DESCRIPTION/SPECIFICATION/WORK STATEMENT

FOR SCISSOR LIFT / MANLIFT REPAIRS

Work Statement

In the performance of this scope of work, the contractor shall provide the services to Repair Six (6ea) scissor lifts located at USCG Air Station Clearwater, 15100 Rescue way, Clearwater Fl,33762.

The contact person for this work is AMT1 Barry Rauch barry.a.rauch@uscg.mil ph (727) 535-1437 x1446

Scope of Services

The contractor shall furnish trained, qualified and scissor lift Certified personnel and any required special tools or equipment necessary to repair six Scissor Lifts / Man lifts.

Contactor to perform the following repairs as stated by model/serial number of each unit.

1) JLG model 1932E, S/N 020052052 – Repair Steering Cylinder.

2) Genie model GS-1930 S/N GS3005-68531- Replace tires, repair leaking pump fitting and replace safety bar pin.

3) JLG model 1932E S/N 04-000820 – Replace steering cylinder and fittings.

4) JLG model 1932E S/N 04-000821 – Replace Controller and replace tires.

5) SNORKEL model S1930E-04-000823 – Replace drive motor, replace fitting on hydraulic tank and gate latch.

6) JLG model 1932E S/N 04-000822 – Replace tires, Repair pump / motor if needed. (unit will not lift)

Contractor Performance Requirements

(1) Services shall be conducted during the following hours:

Monday through Friday excluding holidays.

7:00 am to 3:00 pm

Scissor lifts / Man lift shall be made available prior to Contractors arrival.

(a) Provide all contractual employees with full identification of the company for which they work. This shall be worn when at work on any government-owned or leased facility.

(b) Assigning employees to work under this contact who are:

(1). Trained, qualified personnel regularly engaged in work of this nature.