DRAFT OVC PWS CLEAN POSTED ON SAM 11.18.26.docx

DOCX document 310 KB Posted

Attached to
Operational Video Capability (OVC) Support Services for the United States Secret Service
Solicitation number
70US0927RFI0002
Issued by

About this file

This is a Draft Performance Work Statement (PWS) for Operational Video Capability (OVC) Sustainment Support Services for the United States Secret Service (USSS) Technical Security Division (TSD), issued November 18, 2026, and designated For Official Use Only (FOUO).

The contract requires comprehensive sustainment and operations support for the USSS's Operational Video Capability systems deployed within the National Capital Region (NCR) and potentially at temporary mission locations nationwide. The scope encompasses end-to-end operations and maintenance of technical investigative surveillance equipment including overt and covert video and audio surveillance systems, radio frequency devices, cameras, imaging sensors, wired and wireless data transport methods, and related infrastructure. Required services include RF engineering, corrective and preventive maintenance, configuration management, change management, inventory management, operational management, field support, help desk technical support, and National Special Security Event (NSSE) support. The contractor must provide Phase 1 facilities (a commercial service facility and secure climate-controlled storage facility totaling approximately 5,000 square feet) for a minimum of twelve months, with potential transition to Phase 2 Government-provided facilities with six months' notice. The contract is structured with Firm-Fixed-Price (FFP), Time and Materials (T&M), and Labor Hour line items. Key personnel required include a Program Manager, RF Engineer (requiring SECRET clearance), Electronics Technician, Network Engineer, and Mission Support staff, with specific education and experience qualifications detailed. The base year period of performance runs from January 21, 2027 through January 20, 2028, with four optional one-year extension periods. Base year labor hour estimates include 630 hours for Program Manager, and 1,560 hours each for RF Engineer, Electronics Technician, Network Engineer, and Mission Support during the full performance period (10.5 months), plus up to 192 hours annually for surge and on-call support per category. Travel funding of $33,195 is allocated for base year. Miscellaneous equipment, services, and supplies are budgeted at $114,454.80 not-to-exceed for base year. The Service Contract Act applies with specific wage determinations. Contractor personnel must obtain security clearances and suitability assessments before commencing work, with RF Engineer requiring SECRET clearance. The RFI questionnaire and draft PWS were submitted with responses due November 25, 2026 at 7:00 a.m. EST to Contract Specialist Sarah Diamond (sarah.diamond@usss.dhs.gov) and Contracting Officer Yu-Jin Kim (yu-jin.kim@usss.dhs.gov).

View the file

Other files

File Type Posted
RFI OVC PRICE TEMPLATE POSTED ON SAM 11.18.26.xlsx XLSX spreadsheet
RFI QUESTIONNAIRE OVC POSTED ON SAM 11.18.26.docx DOCX document

On GovTribe

Work with this file

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file

Text version

United States Secret Service (USSS)

Technical Security Division (TSD)

Operational Video Capability (OVC) Sustainment Support Services

Performance Work Statement (PWS)

November 18, 2026

WARNING: This document is FOR OFFICIAL USE ONLY (FOUO). It is to be controlled, stored, handled, transmitted, distributed, and disposed of in accordance with DHS policy relating to FOUO information. This information shall not be distributed beyond the original addressees without prior authorization of the originator, USSS Technical Security Division (TSD).

ORIGINATOR CONTROLLED

Dissemination and extraction of information is controlled by the Originator, USSS TSD.

DO NOT PRINT, COPY, OR DISSEMINATE THIS DOCUMENT WITHOUT PRIOR AUTHORIZATION

Error! Use the Home tab to apply Classification to the text that you want to appear here.

For Official Use Only

For Official Use Onlyii
13

Performance Work Statement (PWS)

Part 1

GENERAL INFORMATION

1.1 Background:

The United States Secret Service (USSS) Technical Security Division’s (TSD) mission includes protective and investigative law enforcement activities. This is a non-personal services contract to provide Operational Video Capability (OVC) Support Services. The USSS TSD is responsible for continually monitoring and assessing hazards and potential threats to Protectees and facilities secured by the USSS. The OVC is an important mission-support capability that enables USSS to conduct video operations in support of protective activities, investigative requirements, and National Special Security Events (NSSEs). TSD has deployed the OVC within the National Capital Region (NCR) and now requires Contractor support to transition the capability into an operations and maintenance environment.

The Contractor shall provide the required support services independently. The Government will not supervise or control Contractor personnel performing services under this contract. Contractor personnel shall remain accountable solely to the Contractor, and the Contractor shall be responsible to the Government for performance under the contract.

In addition, changes to Department of Homeland Security (DHS) wireless spectrum use, including the transition associated with Advanced Wireless Services III (AWS-III), required USSS to move affected capabilities from prior frequency bands to other Government-authorized bands and alternative technologies. As a result, continued Contractor support is required to sustain, operate, and maintain the OVC in alignment with current mission, technical, and operational requirements.

1.2 Scope:

The scope of this effort is to provide professional and technical services necessary to support the daily, end-to-end operations and maintenance of the United States Secret Service (USSS) Operational Video Capability (OVC). This support is required to sustain OVC systems, networks, infrastructure, and related technical capabilities used to support USSS mission operations.

The Contractor shall provide the personnel, equipment, supplies, facilities, transportation, tools, materials, supervision, and other resources necessary to perform the non-personal services described in this Performance Work Statement (PWS), except for items specifically identified as Government-Furnished Property (GFP) or Government-provided services.

The OVC environment includes technical investigative surveillance equipment, software, technologies, techniques, and related capabilities. This may include, but is not limited to, overt and covert video and audio surveillance systems, radio frequency (RF) devices, cameras, imaging sensors, enclosures, sensors, wired and wireless data transport methods, and surveillance platforms.

Required operations and maintenance activities include RF engineering, corrective maintenance, preventive maintenance, configuration management, change management, inventory management, operational management, and transition support. The Contractor shall coordinate with USSS personnel, USSS projects, and other Contractors as necessary to accomplish mission objectives and ensure continuity of OVC support.

The Government may identify future requirements for direct costs associated with hardware, software, and related services. At the Government’s request, the Contractor shall be capable of procuring, managing, and maintaining third-party vendor support agreements, maintenance contracts, and related services necessary to support the OVC mission.

The current technical investigative equipment and software to be supported under this requirement are identified in the Technical Data Package referenced in PWS Section 1.3.5.

1.3 Specific Tasks:

1.3.1 OVC Support:

The Contractor shall perform the OVC support tasks described in Section 1.3.1, OVC Support. Performance under this task shall be conducted in two phases, based on the availability of a Government-furnished facility.

Phase 1 (Contractor-Provided Facilities):

During Phase 1, the Contractor shall provide and operate a fully equipped commercial service facility to perform camera system diagnostics, calibration, maintenance, and repair.

The Contractor shall also provide a secure, climate-controlled storage facility at the Contractor’s location for designated Government-Furnished Equipment (GFE) awaiting repair, maintenance, configuration, or installation at an operational site. Phase 1 shall last for a minimum of twelve (12) months.

The Contractor-provided facilities shall include the tools, diagnostic equipment, storage capacity, and environmental controls necessary to perform all applicable requirements of this PWS.

See PWS 1.3.3 for details.

Phase 2 (Government-Provided Facility Transition):

The Government reserves the right to transition from the Contractor’s commercial facility to a Government-furnished facility within the National Capital Region (NCR). The Government-furnished facility may include the service facility and the storage facility, or just the storage facility. If both facilities are provided, it may be co-located in a single facility or it may be located in two separate facilities, and the contractor will be required to utilize them. If the Government only provides a storage facility, the Contractor will continue to use its service facility. All Government-furnished facilities are expected to be located in the National Capital Region.

Upon notification from the Contracting Officer’s Representative (COR), the Contracting Officer (CO) will provide the Contractor with a written notice of the transition at least six (6) calendar months before the transition date.

Upon transition to Phase 2, the Government will provide the facility. The Contractor may continue to perform camera system diagnostics, calibration, maintenance, and repair using Contractor-owned tools, diagnostic equipment, and resources.

Relocation and Inventory Requirements

The Government will provide the Contractor a forty-five (45) calendar-day relocation period to conduct a complete joint physical inventory of all affected GFE with the Government before moving the equipment from the Contractor’s commercial facility.

The Contractor shall transport all designated GFE from the Contractor’s commercial facility to the Government-furnished storage facility. The Contractor is responsible for packing and safely transporting GFE from the Contractor’s facility to the Government facility. Transportation and facility transition activities shall be performed under the one-time Storage Relocation and Transition CLIN 0007, as applicable.

Chain of Custody and Inventory Tracking The Contractor shall maintain chain-of-custody controls for all GFE during relocation. The Contractor shall coordinate with the Government to ensure that all transferred items are documented, accounted for, and received at the Government-furnished storage facility.

The Contractor shall maintain access to the Configuration Management Database (CMDB) and update the physical-location tags for all affected camera systems within ten (10) business days after completion of the relocation.

Contractor-Owned Property

Upon transition to Phase 2, the Contractor shall retain full ownership, possession, control, and accountability for all Contractor-owned property, including facilities, storage racks, tools, diagnostic equipment, and other Contractor-provided assets.

The Contractor shall be solely responsible for the demobilization, storage, removal, or commercial disposition of Contractor-owned assets that are not required at the Government-furnished storage facility.

1.3.1.1 Sustainment:

The Contractor shall provide sustainment support for the end-to-end operation and maintenance of the Operational Video Capability (OVC). Sustainment support shall include monitoring, maintaining, managing, updating, and restoring OVC networks, systems, infrastructure, equipment, hardware, software, and related components at fixed and temporary mission locations.

Tasks shall include, but are not limited to, the following:

A. Operations and Maintenance Support

The Contractor shall:

1. Operate and maintain the OVC to support mission availability and performance requirements.

2. Monitor OVC systems, networks, events, and components to proactively identify, report, and resolve issues.

3. Establish and maintain recovery processes to support OVC availability requirements, as identified in the Technical Data Package referenced in PWS Section 1.3.5.

4. Maintain and optimize OVC networks and infrastructure, including backhaul and circuits.

5. Provide onsite personnel with the technical capability to perform sustainment tasks and meet operational and contractual requirements.

6. Take remedial action within the applicable Service Level Agreement (SLA) when a component, system, or network is not performing as expected.

B. Software, Firmware, Patch, and License Management

The Contractor shall:

1. Implement approved bug fixes, security patches, firmware updates, software updates, upgrades, and license management activities for Commercial Off-the-Shelf (COTS) products and firmware.

2. Notify the Government of available or required firmware and software updates within 30 calendar days of release.

3. Use the formal Change Management process to obtain approval before performing updates or modifications.

4. Test firmware, software, hardware, equipment, components, network, infrastructure, and configuration upgrades to confirm compatibility with existing systems before implementation.

5. Assist with tracking Government-procured software licenses.

6. Notify the Government at least four months before the expiration of any license or support plan, including Video Management System support plans or similar agreements.

C. Field Support and Site Activities

The Contractor shall perform field support activities necessary to sustain OVC operations. These activities shall include, but are not limited to:

1. Performing preventive and corrective maintenance.

2. Conducting monthly site visits, as required.

3. Responding to incidents and service interruptions.

4. Coordinating issue resolution with vendors, suppliers, site owners, and site owner contractors, including those supporting rooftop sites.

5. Installing, setting up, and configuring radios, cameras, antennas, sensors, mounts, accessories, and related equipment.

6. Supporting site surveys, equipment programming, installations, network monitoring, and load balancing.

7. Providing and maintaining the tools and test equipment required to keep OVC equipment operational.

D. Government-Furnished Tools and Systems

The Contractor shall maintain and use Government-furnished systems and tools, as directed by the Government. These include, but are not limited to:

1. Network Performance and Management (NPM) system.

2. Cybersecurity Compliance Management (CCM) tool.

3. Configuration Management Database (CMDB).

Specific brand names or product names will be provided by the Government upon request or as otherwise required for contract performance.

E. Outage Notification and Reporting

The Contractor shall notify the Government Point of Contact (POC) of each unanticipated OVC outage by email, text message, or telephone call. The Government POC shall be identified upon award by the COR. See Section 1.3.1.2 for specific response times.

The Contractor shall provide monthly reports to the Government POC. Reports shall include, at a minimum:

1. Sustainment activities completed during the reporting period.

2. Network and component health status.

3. System performance trends.

4. Monthly equipment inventory status.

5. Risks, issues, and recommended corrective actions.

6. Status of significant incidents, outages, repairs, or maintenance activities.

The Contractor shall maintain clear and regular communication with the Contracting Officer’s Representative (COR) and Government POC regarding status, risks, issues, and deliverables.

F. Network and Radio Frequency Engineering

The Contractor shall provide network and Radio Frequency (RF) engineering support. Activities shall include, but are not limited to:

1. Supporting system provisioning and reprovisioning to meet operational requirements.

2. Monitoring, analyzing, and reporting RF usage and performance.

3. Detecting, identifying, and reporting RF interference.

4. Performing RF coverage modeling, as needed.

5. Supporting network performance optimization.

G. Training

The Contractor shall provide training to Government personnel and contract staff, as directed by the Government. Training may include equipment installation, configuration, operation, and use of applicable support tools and processes.

H. National Special Security Event Support

At the COR’s request, the Contractor shall assist with OVC support for National Special Security Events (NSSEs) and other mission requirements. Support may include:

1. Site surveys and technical planning.

2. Equipment programming and configuration.

3. System installation and setup.

4. Network monitoring and load balancing.

5. Operational support to ensure systems perform in accordance with mission requirements.

I. Vendor and Subcontractor Support

The Contractor shall establish and manage subcontracts with qualified service providers and vendors as necessary to support OVC sustainment.

Subcontractor security clearances shall be required only for personnel who require access to sensitive areas, sensitive materials, or sensitive discussions. The Government will determine such requirements on a case-by-case basis.

J. Safety Requirements

The Contractor shall provide all safety gear, equipment, and training required for contractor personnel performing maintenance activities. This includes, but is not limited to, fall protection, hard hats, suitable work boots, and other required personal protective equipment. The Contractor shall comply with applicable Occupational Safety and Health Administration (OSHA) requirements and other applicable safety regulations.

Upon request, and when authorized under the applicable Miscellaneous Equipment, Services, and Supplies CLIN, the Contractor shall provide and operate a bucket truck with a bucket capable of reaching 40 feet. The Contractor shall ensure each employee using the bucket truck is trained on high-voltage aerial work and applicable safety procedures.

K. Documentation and Technical Refresh Support

The Contractor shall:

1. Develop and update system documentation, standard operating procedures, and user guides, as directed by the Government.

2. Maintain and update as-built system documentation, as needed.

3. Update the Government-furnished CMDB, as required.

4. Assist with technical refresh planning and execution by notifying the Government of upcoming equipment hardware and/or software near end-of-life and technologies to maintain or enhance deployable video capabilities.

5. Inform the Government when technical refreshes are needed.

L. CCTV and IDS Integration Support

The Contractor may be required to support the development or integration of Closed-Circuit Television (CCTV) and Intrusion Detection System (IDS) capabilities on an as-needed basis, as determined by the Government based on project or event requirements. Integration may include both hardware and software components. Equipment will be Government-furnished.

M. Mission Responsiveness

The Contractor shall be capable of adapting to changing mission requirements, including integration activities, CONUS travel support, temporary CONUS mission locations, and CONUS event support.

1.3.1.2 Technical Support:

The Contractor shall provide technical support to end users and serve as a central resource for troubleshooting, incident tracking, and resolution support. Technical support shall include help desk services and responses to phone, email, and text message inquiries.

Tasks shall include, but are not limited to, the following:

1. Answer user questions and provide technical assistance related to OVC systems, equipment, and services.

2. Troubleshoot user-reported problems and facilitate resolution of known issues.

3. Track, log, manage, and report service requests and incidents.

4. Escalate service requests to the appropriate contractor vendor staff for additional troubleshooting, as needed.

5. Follow up with contractor vendor staff to obtain and track status updates on field issues.

Response Times

Contractor service personnel shall respond to Government service requests within the timeframes specified below.

1. Normal business hours: The Contractor shall acknowledge a service request within two (2) hours after Government notification during the normal business hours of Monday through Friday, 8:00 a.m. EST through 4:00 p.m. EST, excluding Federal holidays. The acknowledgment may be provided by telephone or email. Following the initial acknowledgment, the Contractor shall provide the Government with an estimated onsite arrival time to diagnose and correct the outage.

2. Outside of normal business hours:

1. Critical issues: The Contractor shall acknowledge a service request for a Government-designated critical issue within four (4) hours after Government notification when the request is received after normal business hours, on weekends, or on Federal holidays. The Government shall determine whether an issue is critical. The Contractor shall provide an onsite response when required to resolve or mitigate a critical issue.

2. Standard issues: For a standard issue reported after normal business hours, on weekends, or on Federal holidays, the Contractor shall acknowledge the Government’s service request within six (6) hours after notification. The Contractor shall take the actions necessary to prepare for an operational response during the next normal business period.

Maintenance and Incident Logs

The Contractor shall maintain a log of trouble tickets, incidents, and maintenance activities. For each issue, the Contractor shall document:

1. Issue description.

2. Actions taken.

3. Final disposition.

4. Any required follow-on actions.

The Contractor shall include a maintenance log summary in the monthly status report or provide it as requested by the Government POC.

1.3.1.3 Corrective Maintenance:

The Contractor shall provide corrective maintenance services to restore failed or degraded equipment, systems, and networks to operational condition.

Tasks shall include, but are not limited to, the following:

1. Provide repair services to restore failed equipment or systems to operational condition.

2. Perform troubleshooting to identify, isolate, and correct network, equipment, or system faults.

3. Provide parts provisioning, consumables, labor, tools, and travel required to perform repairs.

4. Use replacement parts provided by the USSS, as applicable.

5. Communicate and coordinate with service providers and vendors to support onsite service and repairs.

6. Execute and manage the depot repair process for components, including priority or standard shipment, exchange, removal, replacement, configuration, and installation support.

7. Administer equipment exchanges and repairs covered under manufacturer warranties.

8. Identify, assess, mitigate, and control corrective maintenance risks.

9. Document corrective maintenance and performance restoration procedures and processes. The Contractor shall update the documentation as needed and make it available to the Government upon request.

Critical Repairs

Critical repairs shall be determined based on the operational impact of the loss or degradation. The Contractor shall notify the Government POC immediately upon identifying a critical issue and provide a recommended solution. An example of a critical repair requirement would be an outage of a currently deployed camera enclosure.

In coordination with the Government, the Contractor shall determine the level of operational impact. The Contractor shall provide hourly status updates to the Government POC until the critical repair is resolved or otherwise dispositioned. Each status update shall include:

1. Current repair status.

2. Estimated repair duration.

3. Warranty status, if applicable.

4. Rough Order of Magnitude cost, if applicable.

5. Recommended corrective action or next steps.

Operational Acceptance Testing

In coordination with the Government, the Contractor shall conduct operational acceptance testing after maintenance or repair activities. Testing shall demonstrate that the serviced equipment or components are fully operational. Operational acceptance testing shall include regression testing of the serviced items and related system components that interact with the serviced equipment, even if those related components were not directly serviced.

1.3.1.4 Preventive Maintenance:

The Contractor shall perform preventive maintenance to reduce the likelihood of unexpected failures, sustain system availability, and support continued operation of OVC equipment and infrastructure.

Tasks shall include, but are not limited to, the following:

A. Preventive Maintenance Planning and Coordination

The Contractor shall:

1. Coordinate preventive maintenance schedules with the Government and third-party vendors.

2. Develop preventive maintenance schedules that include wellness checks, RF audits, annual inspections, manufacturer-recommended inspections, and inspection reporting.

3. Carry out preventive maintenance schedules for equipment, software, and components.

4. Perform preventive maintenance on parts and equipment in accordance with manufacturer guidelines, when provided.

5. Plan and execute preventive maintenance visits at specified intervals.

6. Escort third-party maintenance vendors during service visits, as required.

B. Inspections, Testing, and Repairs

The Contractor shall:

1. Perform routine inspections and wellness checks for OVC hardware, software, equipment, components, and sites.

2. Conduct preventive maintenance inspections of equipment and parts in accordance with manufacturer guidelines.

3. Conduct operational functionality testing of new components.

4. Replace equipment and components, as needed.

5. Perform scheduled preventive maintenance inspections, including spot repairs and follow-on maintenance repairs.

Spot repairs may include minor repairs, such as replacing broken cable hangers or installing small items such as bolts and screws. More significant repairs may include damaged antenna mount hardware, cable repairs, or other items requiring additional labor or materials.

C. Rooftop Site Maintenance

The Contractor shall perform preventive maintenance inspections twice per year at thirteen (13) rooftop OVC sites. Inspections for all rooftop OVC sites shall occur within a single two-week period and shall be scheduled with the Government POC.

The locations of the rooftop OVC sites will be provided by the COR after contract award.

D. Inspection Reports

The Contractor shall prepare inspection reports and submit them to the Government POC within 15 calendar days after the inspection.

Inspection reports shall include:

1. Deficiencies identified.

2. Actions taken to correct deficiencies.

3. Deficiencies that could not be corrected during the inspection.

4. Recommended actions to correct remaining deficiencies.

5. Pricing information for recommended repairs, as applicable.

6. A list of equipment that was inspected/tested.

E. Maintenance Risk Management

The Contractor shall:

1. Identify, assess, mitigate, and control preventive maintenance risks.

2. Develop and implement mitigation strategies to minimize disruptions during planned maintenance outages.

3. Incorporate preventive maintenance risks into the Contractor’s risk management plan and provide the plan to the Government POC.

F. Operational Acceptance Testing

In coordination with the Government, the Contractor shall conduct operational acceptance testing after preventive maintenance activities. Testing shall demonstrate full operation of equipment and components following service.

Operational acceptance testing shall include regression testing of the serviced equipment and system components that interact with the serviced equipment, even if those components were not directly serviced.

G. License, Warranty, and Service Agreement Support

The Contractor shall work with the Government POC to manage equipment and firmware license renewals, warranties, and service agreements.

1.3.1.5 Change Management, Configuration Management, and Inventory Management:

The Contractor shall perform change management, configuration management, and inventory management activities as directed by the Government. The Contractor shall use the Government-furnished Service Desk Plus tool for configuration management, unless otherwise directed by the Government.

The Contractor shall ensure regular recurring backups of the configuration management database. At the conclusion of the contract, the Contractor shall transition the Service Desk Plus instance, including all associated data, to the Government.

1.3.1.5.1 Change Management:

The Contractor may support the Government’s change management process to maintain configuration control of OVC systems and baselined configuration items.

Tasks may include, but are not limited to, the following:

1. Participate in the change management process in accordance with Government direction.

2. Assist the Government with updates to the Change Management Plan as needed.

3. Perform change management activities required to maintain configuration control of baselined Configuration Items (CIs).

4. Initiate, prepare, analyze, and evaluate proposed changes to OVC systems, components, and configurations.

5. Prepare formal Change Requests for repairs, enhancements, new functionality, removal of obsolete capabilities, and other required updates.

6. Include appropriate documentation in each Change Request to describe the scope, impact, and cost estimate of the proposed change.

7. Perform impact analysis and evaluation for each proposed change for presentation to the Change Control Board (CCB).

8. Ensure each change required to support ongoing operations is presented to the CCB for approval.

Implement only those changes approved by the CCB, unless otherwise authorized by the Government.

1.3.1.5.2 Configuration Management:

The Contractor shall support the Government’s configuration management process and maintain accurate configuration data for OVC systems and assets.

Tasks shall include, but are not limited to, the following:

1. Participate in the configuration management process in accordance with Government direction.

2. Assist the Government with updates to the Configuration Management Plan as needed.

3. Maintain current inventory and configuration management data for operational infrastructure, hardware, software, software licenses, equipment, components, firmware, networks, and warranty information.

4. Provide configuration management data as requested by the Government.

5. Maintain configuration control of OVC baselines throughout the configuration management life cycle.

6. Record CI information in the CMDB.

7. Ensure CI information in the CMDB remains current, complete, and accurate.

8. Capture physical attributes and relationships between components in the CMDB to support CI development and management.

9. Track and control changes to the CI baseline throughout the configuration management life cycle.

10. Follow the Change Management process when making updates to the CMDB.

11. Document and provide descriptions of each proposed baseline configuration change, including emergency changes, to the CCB.

12. Ensure baseline configuration changes, including emergency changes, are approved by the CCB before implementation, unless otherwise authorized by the Government.

13. Conduct formal functional and physical audits, as directed by the Government, to compare product configuration with approved documentation.

1.3.1.5.3 Inventory Management

The Contractor shall provide inventory management support to ensure OVC equipment, parts, and supplies are tracked, maintained, tested, and available to support mission requirements.

Tasks shall include, but are not limited to, the following:

A. Inventory Tracking and Control

The Contractor shall:

1. Provide real-time tracking of equipment status, location, and availability.

2. Maintain the ability to provide an inventory list with status upon request by the Government POC.

3. Implement and manage an inventory strategy for ordering, receiving, tracking, and cataloging items and supplies used to sustain the OVC.

4. Maintain inventory for OVC equipment and parts. Current equipment to be supported is identified in the Technical Data Package referenced in PWS Section 1.3.5.

5. Maintain the Bill of Materials and provide each updated version to the Government.

6. Track and maintain warranty status for services and equipment.

B. Equipment Readiness

The Contractor shall:

1. Ensure equipment on the shelf is configured, tested, and capable of fulfilling its intended Government mission before deployment or installation.

2. Coordinate with the Government POC to establish setup and testing timelines for equipment required for pre-planned missions. Timelines shall be based on deployment complexity.

3. Set up, test, and maintain trip kit equipment to ensure it remains operational and ready for deployment or installation.

4. Track trip kits as CIs in the Government-furnished CMDB.

5. Implement and maintain the spare inventory.

6. Maintain a comprehensive set of spares sufficient to equip one complete Central Receive sector, as well as a supply of parts that comprise a Central Receive sector.

7. Conduct recurring testing to ensure spare parts and equipment are capable of performing in the field.

C. Return Merchandise Authorization and Repairs

The Contractor shall:

1. Coordinate the return of inoperable equipment from the field for warranty Return Merchandise Authorization (RMA) repairs.

2. Document each RMA.

3. Establish a trouble ticketing process, as appropriate, as a front-end process for vendor-specific RMA actions.

4. Document RMA procedures and processes for logging and tracking equipment returned for servicing.

5. Update RMA documentation as needed and make it available to the Government upon request.

D. Technical Refresh and End-of-Life Support

The Contractor shall:

1. Assist the Government with technical refresh planning and execution.

2. Monitor and identify assets and parts approaching end-of-life.

3. Identify candidate replacement parts.

4. Coordinate with the USSS to evaluate new technologies and products for potential integration into OVC systems.

5. Anticipate and address diminishing manufacturer supplies.

E. Disposition Planning and Execution

The Contractor shall work with the Government POC to support disposition planning and execution in accordance with Government disposal policy.

Representative activities include:

1. Identifying and reporting equipment that is lost or damaged beyond economical repair.

2. Identifying and reporting excess or end-of-life equipment.

3. Disposing of hardware and software at cleared Government facilities at the end of service life, in accordance with applicable USSS guidance.

1.3.2 Surge and On-Call after-hours support (OVC Support)

The Contractor shall provide surge and on-call after-hours support for each key personnel labor category identified in PWS section 1.4.11. On-call support shall be available during non-business hours, seven (7) days per week, including weekends and Federal holidays.

The total number of on-call and surge support hours shall not exceed one hundred ninety-two (192) hours per year for each applicable key personnel labor category, unless otherwise authorized in writing by the Contracting Officer (CO).

The Contractor shall acknowledge and respond to emergency notifications received during non-duty hours within two (2) hours of Government notification. The response may initially be provided by telephone or email and shall include the Contractor’s planned actions, estimated time to begin support, and estimated time of arrival when onsite support is required.

For planning purposes, the Contractor shall assume one (1) on-call request per month for each key personnel labor category.

The Contractor shall provide on-call support in accordance with the OVC support activities identified in Section 1.3.1.

1.3.3 Phase 1 (Contractor-Provided Facilities)

The Contractor shall provide a service facility and maintain secure storage space for Government-Furnished Equipment (GFE) camera systems totaling approximately 5,000 square feet. The storage space shall include sufficient workspace and storage-rack capacity to store camera enclosures and associated GFE.

The Contractor shall provide a forklift to support equipment logistics and material handling. The forklift shall have an industry-standard lifting capacity of approximately 5,000 pounds. The Contractor shall ensure that forklift operators possess all licenses, certifications, training, and insurance required by applicable Federal, state, and local requirements. If the Contractor provides an electric forklift, the Contractor shall provide an onsite charging station or electrical outlet compatible with the forklift. Forklift operation is an incidental duty of the Mission Support labor category.

The maintenance and storage facility shall include a loading dock or designated loading area capable of supporting the loading and unloading of GFE. The Government prefers a facility with a ramp that allows vehicles to enter and exit the facility.

The Contractor shall provide a heating, ventilation, and air conditioning (HVAC) system capable of maintaining the maintenance and storage facility at a temperature between 65 and 85 degrees Fahrenheit.

The Contractor shall provide access-control measures, intrusion-detection capability, and closed-circuit television (CCTV) coverage for both the maintenance facility and the Contractor-provided storage facility. These security measures shall meet applicable commercial industry standards.

The Contractor shall provide the Government with 24-hour access to the maintenance facility and Contractor-provided storage facility. The Contractor shall coordinate access procedures with the Government.

The Contractor shall provide sufficient electrical power at the maintenance and storage facilities to support servicing, testing, charging, and maintenance of GFE, as applicable.

1.3.4 Operational Management and Reporting:

The Contractor shall provide technical and operational management, planning, organizing, tracking, and reporting. The Contractor shall ensure all tasks are performed and completed in a timely, cost-effective, and efficient manner without compromising the quality of support or the quality of deliverables. The Contractor shall provide an official POC for the COR. The POC shall be responsible for understanding the Government's needs and for ensuring all support personnel are operating cohesively to fulfill contract requirements.

1.3.5 Technical Data Package:

The Technical Data Package (TDP) will be made available after contract award by the COR. The TDP may include, but is not limited to, the following:

· System Performance Requirements

· Government Owned Equipment

· Government Furnished Software

· Government Owned Maintenance Contracts

· Manufacturer Warranties

1.3.6 Required Labor Categories, Work Description, and Requirements:

1.3.6.1 Program Manager

Qualifications for Program Manager:

· Either:

· a) Bachelor’s degree or equivalent with six (6) or more years project/program management experience.

· b) Graduate Degree with at least four (4) years of prior related experience.

· Previous experience managing a minimum of two contracts (preferably at least one Government contract) of the same size and technical complexity as the OVC project.

· Demonstrated experience managing multiple projects with varied technical subjects, including management of personnel across multiple disciplines, programs, and projects.

· Previous experience supervising activities of service technicians and crews, overseeing trouble ticketing processes and incident management, administering vendor return merchandise authorization (RMA) processes, inventory control, executing scheduled preventive maintenance schedules and reporting.

1.3.6.2 Radio Frequency (RF) Engineer

Qualifications for RF Engineer:

· Either:

· a) Bachelor’s degree with six (6) or more years’ electrical engineering experience.

· b) Graduate Degree with at least four (4) years of prior related experience.

· At least six (6) years working experience with necessary technical principles, theories, and concepts, such as: RF transmitter, receiver, and antenna design principles.

· Experience with Atoll, TrueCall, Fuze modules, Virtual Path Identifier (VPI) and other RF/performance tools.

· Extensive knowledge in programming, deploying, and optimizing both Silvus and Siklu radio systems.

· Previous experience supervising activities of service technicians and crews, overseeing trouble ticketing processes and incident management, administering vendor RMA processes, inventory control, executing scheduled preventive maintenance schedules and reporting.

1.3.6.3 Electronics Technician

Qualifications for Electronics Technician:

· Either:

· a) 2-year technical degree, military training, 4+ years of experience as an electronics technician, 1+ year experience with RF circuits to the component level and ability to read assembly prints and schematics.

· b) Graduation from high school or possession of a General Educational Development Certificate (GED) supplemented by thirty (30) hours of coursework in electronics or related field; or successful completion of an approved two (2) year training course in electronics and telecommunications technology or other related fields and four (4) years of related work experience; or an equivalent combination of training and experience. Military training in the RF radio field may be substituted for general experience.

· Demonstrated basic networking skills, principles and practices associated with Wide Area Networks (WAN), Local Area Networks (LAN), and the ability to apply aspects of network design, technical understanding of Long-Term Evolution (LTE)/5G wireless systems and technologies, knowledge of both subscriber and infrastructure RF safety.

· Ability to identify and troubleshoot problems and issues regarding radio, microwave and millimeter wave systems; skilled in the use of complex electronic analyzing equipment such as spectrum analyzer/service monitor to conduct Distance To Fault (DTF) sweeps, VSWR fault isolation, power (forward and reflected), and radio tuning.

1.3.6.4 for Network Engineer

Qualifications for Network Engineer:

· Either:

· a) Bachelor’s degree with six (6) or more years electrical engineering experience.

· b) Graduate Degree with at least four (4) years of prior related experience.

· At least six (6) years working experience with system engineering for wireless and wired networks, network management systems (NMS), network routing, and Juniper router configuration & troubleshooting. Integration of VMS is a plus.

1.3.6.5 Mission Support

Qualifications for Mission Support:

· Ability to interface and coordinate with various Government teams and contracted external vendors.

· Willingness to assist and take direction from Government and other Contractors, e.g., RF Engineer and Electronics Technician.

· Experience and knowledge of configuration management and change management practices, including maintaining CMDBs.

· Experienced with inventory management practices, administering RMAs.

· E5 military or graduation from a technical school preferable.

1.3.7 Subcontractor Management:

The Contractor shall manage its team, including all subcontractors, to ensure the Government interfaces with a single cohesive unit. All contract requirements shall be efficiently communicated and monitored. The Contractor shall review subcontractor progress, document status, and communicate results to the Government as appropriate.

1.3.8 Qualified Personnel:

The Contractor shall be responsible for employing professional and technically qualified personnel to perform the work specified in this PWS as well as key personnel identified in Section 1.4.11. The work history of each Contractor employee shall contain experience directly related to work he/she is expected to perform under this PWS.

All Contractor employees shall secure and possess security credentials as required by USSS background investigation before initiating work on this PWS. Contractor employees working under this PWS shall maintain the required security credentials.

All Contractor personnel shall be able to read, write, speak, and understand English fluently.

The Contractor shall provide certification to the Government that each proposed Contractor candidate meets the requirements for the respective applicable labor category and a brief statement of qualifications.

1.3.9 Employee Identification:

During the period of performance of this contract, the rights of ingress and egress to and from any office for Contractor’s personnel will be made available as deemed necessary by the Government. All Contractor employees, whose duties under this contract require their presence at any Government facility, shall be clearly identifiable by a distinctive badge furnished by the Government. All relevant information shall immediately be delivered to the COR for submission to the appropriate Government Security Office for cancellation or disposition of badges and building and network access upon the termination of employment of any Contractor personnel. All on-site Contractor personnel shall abide by security regulations applicable to that site.

1.3.10 Employee Conduct:

The Contractor shall be responsible for maintaining satisfactory standards of employee competency, conduct, appearance, and integrity and shall be responsible for taking such disciplinary action with respect to employees as may be necessary.

In performing on-site work under this contract on a Government installation or in a Government building, the Contractor shall:

· Conform to the specific safety and security requirements established by the USSS.

· Comply with the safety and security rules of the Government installation.

· Take all reasonable steps and precautions to prevent accidents and preserve the life and health of Contractor and Government personnel connected in any way with performance under this contract.

· Take such additional immediate precautions as the CO or COR may reasonably require for safety and accident prevention purposes.

· Work harmoniously and cooperatively with all Government and stakeholder personnel, including those from other contracting organizations. Successful completion of the mission shall be the Contractor’s primary focus.

1.3.11 Removal of Employees for Misconduct or Security Reasons:

The Government may, at its sole discretion (via the CO), direct the Contractor to remove and bar any Contractor employee from DHS facilities for misconduct, misuse of Government equipment or systems, or security reasons. Removal does not relieve the Contractor of the responsibility to continue providing the services required under the contract. The CO will provide the Contractor with a written explanation to support any request to remove an employee.

1.4 General Information

1.4.1 Period of Performance:

Performance Period
Performance Dates
Base Year Transition-In/EOD
1/21/2027-3/25/2027
Base Year Full Performance
3/26/2027-1/20/2028
Option Year 1
1/21/2028-1/20/2029
Option Year 2
1/21/2029-1/20/2030
Option Year 3
1/21/2030-1/20/2031
Option Year 4
1/21/2031-1/20/2032

1.4.2 Quality Control Plan (QCP):

The contractor shall develop and maintain an effective Quality Control Plan (QCP) to ensure all services are performed in accordance with this PWS. The QCP shall include procedures to identify, prevent, and correct defective services, ensuring non-recurrence. The contractor’s quality control program is the mechanism by which the contractor ensures compliance with all contract requirements.

The initial QCP shall be submitted to the COR and CO, via email, within thirty (30) business days of award. Any changes to the QCP shall be submitted to the COR and CO via email within five (5) business days of the change. All proposed changes to the QCP must receive written acceptance from the CO prior to implementation.

1.4.3 Quality Assurance Surveillance Plan:

The Government shall evaluate the contractor’s performance under this contract in accordance with the Quality Assurance Surveillance Plan (QASP). The QASP is not part of the contract award. Only changes to the Performance Requirements Summary table in the PWS will be executed as a bilateral modification. All other information in the QASP may be changed at the unilateral discretion of the government.

1.4.4 Hours of Operation:

Generally, the contractor is responsible for conducting business, between the hours of 8:00am EST through 4:00pm EST, Monday through Friday except Federal holidays or when the Government facility is closed due to local or national emergencies, administrative closings, or similar Government directed facility closings.

However, based on the required tasks, there may be a deviation from the hours of operations listed in PWS subsection 1.4.4. For example, see the hours of operation for PWS subsection 1.3.2 for Surge and On-Call after-hours support.

Federal Holidays:

The following federal holidays are observed by the Government. Contractor personnel generally will not be required to perform work on these days unless an NSSE falls on a holiday or otherwise directed by the COR. However, there are instances when performance may be required (e.g., see PWS 1.3.2 Surge and On-Call after-hours support).

Holiday
Date Observed (Annually)
New Year’s Day
January 1st
Martin Luther King Jr. Day
Third Monday in January
Presidents’ Day
Third Monday in February
Memorial Day
Last Monday in May
Juneteenth National Independence Day
June 19th
Independence Day
July 4th
Labor Day
First Monday in September
Columbus Day
Second Monday in October
Veterans Day
November 11th
Thanksgiving Day
Fourth Thursday in November
Christmas Day
December 25th

Note: The list of federal holidays may be updated in accordance with Office of Personnel Management (OPM) guidance.

1.4.5 Place of Performance:

The primary places of performance for this contract shall be within the National Capital Region (NCR) and at the Contractor’s service facility within the NCR. Within the NCR, contract personnel may be required to perform support activities at restricted-access Government facilities, including offices, engineering technical labs, warehouses, and other Government-designated locations. The Contractor’s storage facility requirement may change to a government facility during contract performance, as determined by the Government

Contract personnel may also be required to travel to other Government-designated locations within the Continental United States (CONUS) in support of mission requirements, including large-scale National Special Security Events (NSSEs) conducted outside the NCR. Such travel shall be dependent upon the availability of funding and the establishment or use of an applicable travel Contract Line Item Number (CLIN). Travel in support of large-scale out-of-NCR NSSEs may extend for several months, depending on mission requirements.

Situational telework may be allowed on a case-by-case basis at the Government’s discretion to meet mission operational requirements. All telework must be approved in advance by the Contracting Officers Representative (COR). Personnel accessing USSS systems remotely must obtain the proper clearance and comply with all applicable security requirements.

Specific work location addresses will be coordinated with and provided to the Contractor by the COR after award and as future planned events are identified.

All personnel assigned to this contract shall consent to video and audio recording within the workplace, including Government-designated work areas where equipment configuration, testing, or related support activities occur.

1.4.6 Type of Contract:

The Government will award a contract with Firm-Fixed-Price (FFP), Time and Materials (T&M), and Labor Hour contract line items.

1.4.7 Service Contract Act (SCA) Applicability:

The Department of Labor Service Contract Labor Standards Act (SCLS) Wage Determination # 2015-4281, Revision 39, Dated: August 22, 2026, applies to this contract.

Applicable SCA Occupation Codes:

Labor Category Name
SCLS Description
SCLS Occupation Code
Electronics Technician
Electronics Technician Maintenance II
23182
Mission Support
Supply Technician
01410

1.4.8 Privacy Act

Personnel who have access to Privacy Information shall adhere to the Privacy Act, Title 5 of the U.S. Code, Section 552a and applicable agency rules and regulations. It has been determined that this effort for IT services has been determined by the Office of the Chief Information Officer (OCIO) to be “high risk.”

1.4.9 Physical Security

The Contractor shall be responsible for safeguarding all Government equipment, information and property provided for contractor use. At the close of each work period, Government facilities, equipment, and materials shall be secured.

1.4.10 Security Requirements:

This Contract allows for various personnel clearance levels (PCL) to support specific Labor Categories. The Contractor personnel performing work under this contract/order must meet or exceed the specified minimum PCL listed below at…

This is the start of the file's text. The full file is on GovTribe.

File details come from the government source that posted it. Updated .