70SBUR27I00000003 SOW for Law Enforcement Shields.pdf

PDF 261 KB Posted

Attached to
Custom Law Enforcement Shields for USCIS
Solicitation number
70SBUR27I00000003
Issued by

About this file

This is a Statement of Work (SOW) for the manufacture and delivery of custom law enforcement shields for the U.S. Citizenship and Immigration Services (USCIS), issued by the Department of Homeland Security's Office of Security and Integrity, Mission Assurance Division, Identity Management Section.

The contractor shall manufacture, engrave, inspect, package, and deliver law-enforcement-grade metal shields using production methods such as die-struck, die-cast, or equivalent USCIS-approved methods. The requirement includes initial quantities of standard USCIS shields and Special Agent shields with approved reverse-side designations, production tooling development if required, and secure storage and accountability of Government-owned dies, molds, tooling, and related materials. All shield design finalization, die or tooling development, production, engraving, quality control, and packaging activities must be performed at the contractor's own facilities and personnel unless prior written approval is obtained for subcontracting. The contractor shall not manufacture, reproduce, display, sell, transfer, distribute, or use USCIS shield designs, dies, molds, tooling, numbering data, or completed shields for any purpose other than contract performance. USCIS will provide approved shield artwork, design specifications, dimensions, material and finish specifications, engraving specifications, position titles, shield-number sequences, and reverse-side designation requirements through a controlled Government process.

The SOW establishes comprehensive requirements for pre-production proofs and Government approval before full production begins, quality control procedures ensuring each shield conforms to specifications, production accountability and serialized record-keeping, secure packaging and trackable shipping, and incident reporting within one business day for any unauthorized production, access, loss, theft, damage, or compromise. Special Agent shields must include Government-approved reverse-side "A" designations with corresponding shield numbers matching front-side numbers. The contractor must maintain annual physical inventories of Government-owned production assets, comply with Federal Acquisition Regulation Government Property clause FAR 52.245-1, and restrict access to authorized personnel. Dies, molds, tooling, and production files developed under this requirement become USCIS property unless otherwise stated in writing by the Contracting Officer. Suggested acquisition codes include NAICS 339999 (All Other Miscellaneous Manufacturing) and PSC 8455 (Badges and Insignia). Delivery locations will be specified in the resulting contract or applicable orders, with specific production and delivery timeframes to be established in those orders, including timeframes for pre-production proofs, initial production, routine reorders, and replacement shields at no additional cost to the Government.

View the file

Other files

On GovTribe

Work with this file

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file

Text version

Statement of Work

Custom Law Enforcement Shields for U.S. Citizenship and Immigration Services

Department of Homeland Security

U.S. Citizenship and Immigration Services

Office of Security and Integrity

Mission Assurance Division, Identity Management Section

1. Title

Custom Law Enforcement Shields for USCIS Personnel

2. Background

The U.S. Citizenship and Immigration Services (USCIS), Office of Security and Integrity (OSI), Mission Assurance Division (MAD), Identity Management Section (IMS), requires a contractor to manufacture and deliver law-enforcement-grade metal shields for designated USCIS personnel.

USCIS requires standardized shields that visibly identify and support the official duties of personnel performing authorized law enforcement and related leadership functions. The shields must be manufactured according to USCIS-approved design, material, finish, engraving, numbering, and security specifications.

Detailed shield artwork, security features, shield-number sequences, position titles, and other controlled production information will be provided through an authorized Government-controlled process and shall not be included in public solicitation materials.

3. Objective

The objective of this requirement is to obtain secure, high-quality production and delivery of standardized USCIS law enforcement shields, including:

1. An initial quantity of standard USCIS shields;

2. An initial quantity of Special Agent shields with an approved reverse-side designation;

3. Production tooling, if required;

4. Secure storage, accountability, and safeguarding of Government-owned dies, molds, tooling, designs, and related production materials; and

5. The ability to fulfill authorized future orders for additional shield quantities, revised position titles, and replacement shields during the contract ordering period.

For purposes of this SOW, the term shield means a law-enforcement-grade metal badge or credential shield manufactured under this requirement.

4. Scope

The contractor shall manufacture, engrave, inspect, package, safeguard, and deliver USCIS shields in accordance with this SOW and Government-furnished specifications.

The contractor shall use a production method capable of producing durable, law-enforcement-grade metal shields, such as die-struck, die-cast, or an equivalent method approved by USCIS.

The contractor shall identify its proposed production method in its quotation or proposal.

The contractor shall perform all shield design finalization, die or tooling development, production, engraving, quality control, and packaging activities using its own facilities and personnel unless the Contracting Officer provides prior written approval for a subcontracting arrangement. Any approved subcontractor shall be subject to the same safeguarding, accountability, and security requirements that apply to the contractor.

The contractor shall not manufacture, reproduce, display, sell, transfer, distribute, or otherwise use USCIS shield designs, dies, molds, tooling, numbering data, samples, or completed shields for any purpose other than performance of the resulting contract.

5. Government-Furnished Information and Property

5.1 Government-Furnished Information

USCIS will provide the contractor, through a controlled process, the information necessary to produce the shields. Government-furnished information may include:

• Approved shield artwork and design specifications;

• Dimensions;

• Material and finish specifications;

• Engraving specifications;

• Position titles;

• Shield-number sequences;

• Reverse-side designation requirements;

• Quality standards;

• Packaging, shipping, delivery, and acceptance instructions; and

• Other relevant production requirements.

The contractor shall protect all Government-furnished information from unauthorized access, disclosure, duplication, or use.

5.2 Government-Furnished Property

If applicable, USCIS may furnish an existing shield die, mold, tooling, or related production materials as Government-furnished property (GFP). GFP will be identified in the resulting contract, order, or property attachment.

The contractor shall manage Government property in accordance with applicable contract terms and the Federal Acquisition Regulation (FAR) Government Property clause, including FAR

52.245-1, as incorporated in the resulting award.

6. Requirements

6.1 Shield Design, Die Development, and Tooling

If USCIS requires development of a new die, mold, or other production tooling, the contractor shall develop the tooling using USCIS-approved specifications.

The contractor shall:

1. Provide a proposed production method, including whether the shields will be die-struck, die-cast, or produced using an equivalent approved method.

2. Develop a shield die, mold, or other production tooling as required to manufacture the approved shield design.

3. Submit a pre-production proof, sample, or other design-validation item for USCIS approval before beginning full production.

4. Make any corrections required by USCIS before beginning full production.

5. Maintain standardized shield appearance across all shields produced under this requirement, except for Government-authorized variations in position title, shield number, engraving, or designation.

The die, mold, tooling, related design materials, and production files developed under this requirement shall be the property of USCIS, unless otherwise stated in writing by the

Contracting Officer.

The contractor shall not use, reproduce, transfer, sell, disclose, or permit access to Government-owned dies, molds, tooling, designs, or production materials except as necessary to perform the resulting contract.

6.2 Safeguarding and Accountability of Tooling

The contractor shall securely store Government-owned dies, molds, tooling, design materials, and related production assets at its facility for the duration of the contract.

At a minimum, the contractor shall:

1. Restrict access to personnel with a legitimate need to perform work under the contract.

2. Maintain a current inventory and accountability record for all USCIS-owned production assets.

3. Provide inventory and accountability records to USCIS upon request.

4. Conduct physical inventories at least annually and upon contract completion, expiration, termination, or transfer of custody, unless otherwise directed in writing by the

Government.

5. Notify the Contracting Officer and Contracting Officer’s Representative (COR) in writing within one business day after discovering any actual or suspected loss, theft, damage, destruction, unauthorized access, unauthorized use, or compromise involving

Government-owned tooling or related materials.

6. Provide a written incident report and corrective-action plan within the timeframe directed by USCIS.

At contract completion, expiration, or termination, the contractor shall return, transfer, continue storing, or dispose of Government-owned production assets only as directed in writing by the

Contracting Officer.

The contractor shall not destroy, dispose of, or relinquish control of Government-owned property without written authorization from the Contracting Officer.

6.3 Special Agent Shields

The contractor shall manufacture and deliver sets of Special Agent Shields.

Each set of Special Agent shields shall:

1. Use the same USCIS-approved shield design, material, finish, and general appearance as the standard shields.

2. Include the USCIS-approved Special Agent position title and unique shield number.

3. Include the Government-approved reverse-side “A” designation and corresponding shield number. Example:

1. Special Agent Shield Set

1. Shield 1

1. The next shield number in the sequence will be applied. In this example, the next shield is number 65

2. Shield 2

1. The second shield in the set will have the same number as the first shield in the set with an “A” on the back of the shield. In this example, second shield is number 65A

4. Ensure the reverse-side designation and shield number accurately correspond to the front-side shield number.

5. Conform to all approved design, material, quality-control, security, and packaging requirements.

6.5 Additional Quantities and Position-Title Changes

During the ordering period, USCIS may order additional shield quantities, subject to the terms, quantities, ceiling, and ordering procedures established in the resulting contract.

Additional orders may include:

• Sets of Special Agent shields with the approved reverse-side designation;

• Replacement shields;

• Shields with new or revised USCIS-provided position titles; and

• Other USCIS-approved engraving or numbering changes that do not alter the standardized shield design.

The contractor shall produce additional shields in the quantities, position titles, numbering sequences, and delivery schedules stated in the applicable order.

The offeror shall provide unit pricing, quantity price breaks, setup costs, proofing costs, expedited-production costs, and anticipated lead times for additional quantities in its pricing quotation or proposal.

6.6 Pre-Production Proof and Approval

Before full production, the contractor shall provide a pre-production proof, sample, or other

Government-approved design-validation item.

The Government will review the submitted item for conformance with approved specifications, including design, dimensions, material, finish, title, engraving, numbering, and reverse-side requirements.

The contractor shall not begin full production until receiving written approval from USCIS.

Any required correction resulting from contractor error or failure to comply with Government-provided specifications shall be made at no additional cost to the Government.

6.7 Production Accountability

The contractor shall maintain complete, accurate production records for all shields produced under the contract.

Production records shall include, at a minimum:

• Shield number;

• Position title;

• Shield type;

• Date of production;

• Quality-control inspection status;

• Shipment date;

• Shipping tracking information;

• Disposition of defective, rejected, excess, damaged, or destroyed shields; and

• Other information reasonably required by USCIS for accountability.

The contractor shall provide production-accountability records to the COR upon request and at completion of each order.

The contractor shall not retain, reuse, sell, transfer, display, or distribute rejected, defective, test, sample, excess, or damaged shields. The contractor shall dispose of such items only in accordance with written direction from the Contracting Officer and, when required, provide a certification of destruction or disposition.

6.8 Quality Control

The contractor shall implement and maintain quality-control procedures sufficient to ensure each shield conforms to USCIS-approved specifications.

Before shipment, the contractor shall inspect each shield to verify that:

1. The shield is free from defects, damage, and manufacturing irregularities.

2. Engraved position titles and shield numbers are accurate, complete, and legible.

3. Special Agent shields include the correct reverse-side designation and corresponding shield number.

4. The shield conforms to the approved standardized USCIS design, material, finish, and dimensional requirements.

5. The shield is correctly packaged and accounted for before shipment.

The contractor shall document the results of quality-control inspections and provide the records to USCIS upon request.

6.9 Packaging, Shipment, and Delivery

The contractor shall package shields in a manner that protects them from damage, loss, tampering, and unauthorized access during storage and shipment.

The contractor shall:

1. Use a trackable shipping method.

2. Maintain shipping and delivery records sufficient to establish accountability from the contractor’s facility through delivery to the Government-designated location.

3. Avoid external package markings that unnecessarily identify the contents as law enforcement shields or badges.

4. Deliver completed shields to the USCIS location identified in the applicable order or other written Government direction.

5. Provide delivery confirmation and applicable tracking information to the COR.

The Government will provide specific delivery location, receiving, and acceptance instructions through the resulting contract or applicable order.

6.10 Production and Delivery Schedule

The contractor shall meet the production and delivery schedule established in the resulting contract or applicable order.

Unless otherwise stated in an order, the contractor shall:

Deliverable Required Timeframe

Pre-production proof or sample Within [X] business days after receipt of complete

Government specifications

Deliverable Required Timeframe

Initial production order Within [X] calendar days after written Government approval of the proof or sample

Routine reorder Within [X] calendar days after receipt of a complete order

Replacement of rejected or defective shield Within [X] business days after Government notification

The contractor shall notify the Contracting Officer and COR in writing within one business day after becoming aware of an actual or anticipated delay. The notification shall identify the cause, anticipated duration, affected quantity, and proposed corrective action.

6.11 Inspection and Acceptance

The Government may inspect all delivered shields for conformance with the requirements of the resulting contract.

The COR or other authorized Government representative will verify, at a minimum:

• Quantity;

• Shield type;

• Design conformity;

• Position titles;

• Shield-number accuracy;

• Required reverse-side designations;

• Condition upon delivery; and

• Packaging and shipment accountability.

The Government may reject any shield that does not conform to contract requirements. The contractor shall replace rejected, defective, damaged, or incorrectly engraved shields at no additional cost to USCIS within the timeframe directed by the Government.

Government acceptance will occur only after written confirmation by an authorized Government representative that the delivered shields conform to the contract requirements.

8. Security Incident Reporting

The contractor shall notify the Contracting Officer and COR in writing within one business day after discovering any actual or suspected:

• Unauthorized production;

• Unauthorized access, use, duplication, or disclosure;

• Loss, theft, damage, or destruction;

• Misdelivery;

• Compromise of shield designs, dies, molds, tooling, engraving data, shield-number data, or completed shields; or

• Other event that could affect the integrity or accountability of USCIS shields.

The contractor shall provide a written incident report and proposed corrective-action plan within the timeframe directed by USCIS.

9. Deliverables

Deliverable Description Due Date/Frequency

Production Method

Description

Description of proposed manufacturing method and quality controls

With quotation/proposal

Pre-Production Proof or

Sample

Proof, sample, or other design-validation item

Within [X] business days after receipt of complete specifications

Sets of Special Agent

Shields

Sets of Special Agent shields with required reverse-side designation

Within [X] calendar days after proof approval

Quality-Control Records

Records demonstrating inspection and conformity for each production order

With each shipment or upon request

Production Accountability

Report

Serialized production, shipment, and disposition record

With each shipment and upon request

Deliverable Description Due Date/Frequency

Shipping Confirmation

Shipping carrier, tracking number, shipment date, and delivery confirmation

At shipment and upon delivery

Government Property

Inventory

Inventory of Government-owned dies, molds, tooling, and related materials

Annually and at contract completion

Incident Report Report of actual or suspected security incident or compromise

Within timeframe directed by

USCIS

Disposition/Destruction

Certification

Certification for items disposed of under Government direction

As directed by the Contracting

Officer

10. Place of Performance

The contractor shall perform manufacturing, engraving, quality-control, and packaging work at the contractor’s facility or another facility approved in writing by the Contracting Officer.

The delivery location or locations will be identified in the resulting contract or applicable order.

11. Suggested Acquisition Codes

Code Type Recommended Code Description

NAICS 339999 All Other Miscellaneous Manufacturing

PSC 8455 Badges and Insignia

File details come from the government source that posted it. Updated .