Sol_70LGLY26QGLB00016_Amd_0001.pdf

Offers must acknowledge receipt of this amendment prior to the hour and date specified in the solicitation or as amended, by one of the following methods:

(a) By completing items 8 and 15, and returning or (c) By separate letter or electronic communication which includes a reference to the solicitation and amendment numbers. FAILURE OF YOUR ACKNOWLEDGMENT TO BE RECEIVED AT THE PLACE DESIGNATED FOR THE RECEIPT OF OFFERS PRIOR TO THE HOUR AND DATE SPECIFIED MAY RESULT IN REJECTION OF YOUR OFFER. If by virtue of this amendment you desire to change an offer already submitted, such change may be made by letter or electronic communication, provided each letter or electronic communication makes reference to the solicitation and this amendment, and is received prior to the opening hour and date specified.

E. IMPORTANT: is not is required copies to the issuing office.

AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT 1. CONTRACT ID CODE

2. AMENDMENT/MODIFICATION NUMBER 3. EFFECTIVE DATE 4. REQUISITION/PURCHASE REQUISITION NUMBER 5. PROJECT NUMBER (If applicable)

7.ADMINISTERED BY (If other than Item 6) CODE

STANDARD FORM 30 (REV. 11/2016)

Prescribed by GSA FAR (48 CFR) 53.243

FACILITY CODE

9A. AMENDMENT OF SOLICITATION NUMBER

9B. DATED (SEE ITEM 11)

10A. MODIFICATION OF CONTRACT/ORDER NUMBER

10B. DATED (SEE ITEM 13)

11. THIS ITEM ONLY APPLIES TO AMENDMENTS OF SOLICITATIONS

The above numbered solicitation is amended as set forth in Item 14. is extended. is not extended.

12. ACCOUNTING AND APPROPRIATION DATA (If required) copies of the amendment; (b) By acknowledging receipt of this amendment on each copy of the offer submitted;

13. THIS ITEM APPLIES ONLY TO MODIFICATIONS OF CONTRACTS/ORDERS.

IT MODIFIES THE CONTRACT/ORDER NUMBER AS DESCRIBED IN ITEM 14.

CHECK ONE A. THIS CHANGE ORDER IS ISSUED PURSUANT TO: (Specify authority) THE CHANGES SET FORTH IN ITEM 14 ARE MADE IN THE CONTRACT ORDER

NUMBER IN ITEM 10A.

B. THE ABOVE NUMBERED CONTRACT/ORDER IS MODIFIED TO REFLECT THE ADMINISTRATIVE CHANGES (such as changes in paying office, appropriation data, etc.) SET FORTH IN ITEM 14, PURSUANT TO THE AUTHORITY OF FAR 43.103(b).

C. THIS SUPPLEMENTAL AGREEMENT IS ENTERED INTO PURSUANT TO AUTHORITY OF:

D. OTHER (Specify type of modification and authority)

Except as provided herein, all terms and conditions of the document referenced in Item 9A or 10A, as heretofore changed, remains unchanged and in full force and effect.

15C. DATE SIGNED

15A. NAME AND TITLE OF SIGNER (Type or print)

16C. DATE SIGNED

16A. NAME AND TITLE OF CONTRACTING OFFICER (Type or print)

14. DESCRIPTION OF AMENDMENT/MODIFICATION (Organized by UCF section headings, including solicitation/contract subject matter where feasible.)

PAGE

6. ISSUED BY CODE

8. NAME AND ADDRESS OF CONTRACTOR (Number, street, county, State and ZIP Code) (X)

CODE

15B. CONTRACTOR/OFFEROR

(Signature of person authorized to sign)

16B. UNITED STATES OF AMERICA

(Signature of Contracting Officer)

Previous edition unusable

PAGESOF

Contractor

The hour and date specified for receipt of Offers to sign this document and return

See continuation page

DEPARTMENT OF HOMELAND SECURITY

FEDERAL LAW ENFORCEMENT TRAINING CENTERS

1131 CHAPEL CROSSING RD

GLYNCO GA 31524

70LGLY

70LGLY26QGLB00016

03/02/2026

03/02/2026

1 3

CONTINUATION SHEET

REFERENCE NO. OF DOCUMENT BEING CONTINUED PAGES

NAME OF OFFEROR OR CONTRACTOR

SUPPLIES/SERVICES

(B)

UNIT

(D)

UNIT PRICE

(E)

AMOUNT

(F)

OPTIONAL FORM 336 (4-86)

Sponsored by GSA FAR (48 CFR) 53.110

ITEM NO.

(A)

QUANTITY

(C)

NSN 7540-01-152-8067

70LGLY26QGLB00016/0001

0001 25 EA

2026 FLETC Operation and Support 70 0509

Amendment issued to correct Part Numbers and include Installation Parts/Accessories into the

Scope of Work. Delivery date is April 1, 2026 or before. Due to mission requirements no questions will be received/accepted.

All quoters shall submit a statement of compliance with FAR 52.222-50, Combatting

Trafficking in Persons.

Change Item 0001 to read as follows(amount shown is the total amount):

Firm Fixed Price- Top-Load Washers

See Scope of Work for details. All necessary Installation Parts and Accessories required.

Color: Matte Black

Speed Queen TR7006BN or Equal

Minimum Salient Characteristics:

• True commercial/OPL construction; top-load, agitator design

• Free-use controls (no coin, no card hardware)

• Stainless steel wash tub; heavy-duty transmission/suspension

• High extraction spin to reduce dryer time

• Multiple water level and temperature selections

• 120V, single phase

• Standard hot/cold water hose connections;

gravity drain

• Finish: Black

• Designed for high-turnover communal/student use

Product/Service Code: 3510

Product/Service Description: LAUNDRY AND DRY

CLEANING EQUIPMENT

Change Item 0002 to read as follows(amount

Continued...

CONTINUATION SHEET

REFERENCE NO. OF DOCUMENT BEING CONTINUED PAGES

NAME OF OFFEROR OR CONTRACTOR

SUPPLIES/SERVICES

(B)

UNIT

(D)

UNIT PRICE

(E)

AMOUNT

(F)

OPTIONAL FORM 336 (4-86)

Sponsored by GSA FAR (48 CFR) 53.110

ITEM NO.

(A)

QUANTITY

(C)

NSN 7540-01-152-8067

70LGLY26QGLB00016/0001

0002 25 EA

shown is the total amount):

Firm Fixed Price- Commercial Natural Gas Dryer

See Scope of Work for details. All neceessary installation parts and accessories required.

Color: Matte Black

Speed Queen DR7004BG or equal

Minimum Salient Characteristics:

• True commercial dryer; OPL/free-use controls

• Factory Natural Gas configuration (no field conversion)

• Large capacity drum; galvanized or stainless interior

• Rapid heat recovery burner for fast cycle turnover

• Front lint screen; simple timer/temperature controls

• 120V electrical connection for controls/ignition

• Standard rear 4-inch exhaust vent connection

• Finish: Matte Black

• Designed for continuous, high-volume use

“Or equal” products must meet all salient characteristics and be verifiably commercial/OPL grade.

Product/Service Code: 3510

Product/Service Description: LAUNDRY AND DRY

CLEANING EQUIPMENT

Statement of Work (SOW)

Commercial Laundry Equipment Delivery – Free-Use Student Laundromat FLETC Artesia Training Delivery Point, Artesia

1. Scope

The contractor shall furnish and deliver twenty-five (25) commercial top-load washers and twenty-five (25) commercial natural-gas dryers, matte black in color, for a free-use student laundromat at the Federal Law Enforcement Training Centers (FLETC) Artesia Training Delivery Point no later than April 1, 2026.

FLETC will perform all installation, hookups, venting, gas connections, and start-up.

This requirement is delivery only. However, all necessary installation parts and accessories shall be included for each machine. Government will handle offloading.

2. Equipment Basis of Design (or equal)

Item 1: Washer (Basis): Speed Queen TR7006BN — Commercial Top-Load, OPL/Free-Use, Black

Salient characteristics (minimum):

• True commercial/OPL construction; top-load, agitator design

• Free-use controls (no coin, no card hardware)

• Stainless steel wash tub; heavy-duty transmission/suspension

• High extraction spin to reduce dryer time

• Multiple water level and temperature selections

• 120V, single phase

• Standard hot/cold water hose connections; gravity drain

• Finish: Matte Black

• Designed for high-turnover communal/student use

Item 2: Dryer (Basis): Speed Queen DR7004BG — Commercial Natural Gas Dryer, Black

Salient characteristics (minimum):

• True commercial dryer; OPL/free-use controls

• Factory Natural Gas configuration (no field conversion)

• Large capacity drum; galvanized or stainless interior

• Rapid heat recovery burner for fast cycle turnover

• Front lint screen; simple timer/temperature controls

• 120V electrical connection for controls/ignition

• Standard rear 4-inch exhaust vent connection

• Finish: Matte Black

• Designed for continuous, high-volume use

“Or equal” products must meet all salient characteristics and be verifiably commercial/OPL grade.

Items 3: ALL Installation Parts and Accessories required for each machine: Items to include the following:

6' SS Laundry Hose (CS50) 6' Gas Dryer Connector 8' Semi-Rigid Lock Vent Adapter, 3/4" MIP x 3/8" OD Flare Close Elbow with Screw Clamp Instruction, LKITGAS Leak Test Thread Sealer Warning Tag, Laundry Hose

3. Quantity

• 25 Washers (black)

• 25 Natural Gas Dryers (black)

4. Delivery Requirements

• Deliver all equipment to the FLETC Artesia Training Delivery Point loading area as directed by the COR. Address: 1300 West Richey Ave, Artesia, NM.

• Provide advance delivery coordination (48 hours minimum).

• Offload equipment from truck to designated staging area.

• Deliver units on pallets, protected, undamaged, and factory packaged.

• Provide manufacturer documentation, cut sheets, and warranty information at delivery.

• Remove and dispose of all packaging materials.

• Delivery April 1, 2026 or before.

• Government will handle offload.

5. Warranty

• Provide standard commercial manufacturer warranty documentation for each unit.

• Units shall be new, unused, and current production models.

6. Acceptance

FLETC will inspect for:

• Correct quantities

• Black finish

• Commercial/OPL configuration

• Natural Gas factory configuration for dryers

• No shipping damage

Sponsored by GSA FAR (48 CFR) 53.110