questions and answers racks.docx
DOCX document 18 KB Posted
- Attached to
- Hardwood pistol rack with 14 aluminum pins
- Solicitation number
- 70LART26QPFB00029
About this file
This is a Questions and Answers document clarifying specifications for a hardwood HDPE pistol rack solicitation issued by the Department of Homeland Security Federal Law Enforcement Training Center (FLETC Artesia). The document addresses material composition, dimensions, hardware specifications, and delivery requirements for 150 pistol racks.
Key specifications confirmed include: 1/4-inch HDPE black composite material for the main panels; a 1/4-inch aluminum base plate measuring 22 inches long by 4 inches wide; thirteen 1/4-inch diameter aluminum pegs (6061 alloy) that are four inches long, secured via press-fit and adhesive retention, spaced 1-1/8 inches and 5-3/8 inches from centerline; 1/4-inch by 1-inch countersunk screws (7 on the back, 3 on the side); and a 4-inch handle opening from the bottom of each end panel. The document specifies that color does not matter, dimensional tolerances are not required, and no protective feet, padding, or identification labels are needed. A first-article sample submission consisting of a drawing and photograph is required for approval before production commences. Deliveries must occur in partial or staggered shipments totaling 25-50 percent of racks at a time, with all units required by October 7, 2026. Bulk packaging and palletizing are required with shipment markings indicating item quantities per package and pallet.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| 70LART26QPFB00029 0001.pdf | ||
| PISTOL RACK 9-15-26.pdf | ||
| PISTOL RACK DRAWING.pdf | ||
| Resized_20250924_130525.pdf | ||
| Resized_20250924_130456.pdf | ||
| Resized_20250924_130515.pdf | ||
| 70LART26QPFB00029.pdf | ||
| Pistol Peg Board Drawing.pdf | ||
| Commercial items clauses 9.14.26.docx | DOCX document |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Questions and Answers:
1. The solicitation describes the item as a “hardwood HDPE Pistol Rack,” while the attached drawing specifies ¾-inch black composite sheet. Which material requirement controls? HDPE Pistol Rack Hardwood
2. If ¾-inch black composite is required, please identify the acceptable material type or specification—for example, (HDPE), phenolic, plywood, or another composite. HDPE
3. The end-panel depth appears to be identified as both 6½ inches and 6¾ inches. Please confirm the controlling finished dimension. 6¾ inches
4. Please confirm the finished length and width of the ¼-inch aluminum base plate. 22 ¾ long & 4” wide
5. Please provide the required front-to-rear centerline location of the thirteen aluminum pegs on the base plate. 1 1/8” & 5 3/8”
6. Please confirm that the pegs are ¼-inch-diameter aluminum rod, four inches long, and spaced 1½ inches on center. Yes
7. How must the aluminum pegs be secured to the aluminum base—(press-fit), threaded, welded, adhesive-retained, or another method? PRESS-FIT & ADHESIVE-RETAINED
8. Please identify the required aluminum alloy and finish for the base plate and pegs.
It is only REAR PLATE ALUMINUM AND PEGS (6061)
9. The drawing references “⅜-inch screws.” Does this refer to screw diameter or length? Please provide the required screw size, material, head style, and finish.
¼” x 1 ½” COUNTER SUNK
10. Please confirm the number and location of the assembly fasteners. 7 ON THE BACK SIDE & 3 ON THE SIDE WALL
11. Please confirm the finished dimensions, corner radius, and location of the handle opening in each end panel. 4” FROM THE BOTTOM FOR HANDLE OPENING
12. Are there required dimensional tolerances, edge radii, surface finishes, or deburring standards? No.
13. Are protective feet, padding, or nonmarring contact surfaces required? No.
14. Are any product identification labels, part numbers, manufacturer markings, or contract markings required on the completed racks? No.
15. Is a first-article sample, drawing, or photograph required for approval before production of all 150 units? DRAWING AND PHOTOGRAPH
16. Must all 150 racks arrive at FLETC Artesia by October 7, 2026, or is that the required shipment date?
25% or 50% of the racks at a time.
17. Will partial or staggered deliveries be accepted? Yes.
18. Are there specific individual-packaging, bulk-packaging, palletizing, or shipment-marking requirements? BULK-PACKAGING/PALLETIZING: SHIPMENT MUST STATE ITEM QUANTITIES PER PACKAGE AND PALLET.
19.
Component Specifications: Please confirm the required material type, thickness, finish/color, and dimensions for each component of the pistol rack. THICKNESS ¾” , MATERIAL IS HDPE, FINISH COLOR DOES NOT MATTER
20. Pegs/Pins: Please confirm the required number, length, diameter, spacing, and orientation of the pegs/pins. PEGS/PINS 13
21. How far from the edge of the 1/4” x 4” aluminum flat are the 1/4” round pegs? 1” TO CENTER OF PIN
22. Can a dark-colored simulated wood material be used? COLOR DOES NOT MATTER
File details come from the government source that posted it. Updated .