70B06C26R00000072-Attachment 1 - SOW.pdf

ATTACHMENT 1

Firearms Mounted Sighting Systems

Statement of Work (SOW)

70B06C26R00000072

February 2026

1. BACKGROUND

1.1. This requirement is for the procurement of firearms mounted sighting systems in support of the mission of officers and agents within U.S. Customs and Border Protection (CBP), as well as other agencies both within and outside of the Department of Homeland Security (DHS).

1.2. Relevant components within and outside of DHS may include but are not limited to the following listed in Table 1.2, below. This contract will be awarded and administered by U.S. Customs and Border Protection (CBP).

Table 1.2 Agencies and Abbreviations

DHS Component Abbreviation U.S. Customs and Border Protection CBP Other DHS Components or Non-DHS Agencies

TBD

2. SCOPE

2.1. The intent of CBP is to contract for Firearms Mounted Sighting Systems. This statement of work delineates the required performance and technical specifications.

2.2. Vendor shall provide additional administrative and logistical support, including but not limited to customer service support, shipping, and handling (FOB destination), and invoicing/payment support.

2.3. Vendor shall provide manufacturer’s technical specifications for items required for submission. Specifications shall address all technical requirements listed within this document.

3. APPLICABLE DOCUMENTS: None

4. TECHNICAL REQUIREMENTS

4.1. General Requirements

4.1.1. All items specified in sections 4.3, 4.4, 4.5, and items specified in sub-sections 4.6.6, 4.6.7, 4.6.8, 4.6.9, 4.6.10 and 4.6.11 must be permanently marked with individual and legible serial numbers which are visible to the user when the item is mounted on a firearm. CBP defines the serial number as the unique alphanumeric identifier assigned to each product. This identifier includes any adjacent location code or additional characters that are not distinctly separated from the main sequence of the identifier.

4.1.2. Each item with a serial number must be packaged in a box that clearly displays the item's make, model, serial number, and barcode associated with that serial number on the outside of the box. These details must remain visible when the boxes are stacked.

4.1.2.1. Each serial number and associated barcode displayed on the box, as well as each serial number and associated barcode on any inventory sheet, must be identical to the serial number permanently marked on the serialized item, including all numerical and alphanumerical characters.

4.1.3. The vendor shall not make any alterations or substitutions without prior notification, and written approval by the COR.

4.2. Back-Up Iron Sights (BUIS)

4.2.1. Flip-Up Rear Iron Sights: This flip-up rear sight shall be designed to be affixed to standard CBP duty flat top M4 receivers with 1913 Picatinny rails.

The sight shall be affixed to the rail via clamp and cross bolt, requiring a tool for installation and removal. The sight shall be equipped with a minimum of two apertures, a large aperture with an I.D. between .180” and .205” and a small aperture with an I.D. between .065” and .075”. The sight shall allow a no-tool change of apertures by the user. The sight shall be equipped with a windage adjustment feature. The windage adjustment shall require the use of a tool. Each adjustment of the windage shall provide audible and tactile feedback. Each adjustment shall be secure and provide 0.5 MOA. The height of the center of the apertures shall be 1.40” from the top of the Picatinny rail when in the flipped-up position. The height of the sight body shall be no more than .60” higher than the top of the Picatinny rail when in the flipped-down position. The sight shall be able to be flipped up by only swiveling the body of the sight upwards to a locked position. The sight shall remain in the locked position until a de-locking mechanism is pressed by the user. The body of the sight shall be made of hardened T6 aluminum. The remaining components may be constructed of hardened T6 aluminum or stainless steel. Sight shall be black anodized. Performance shall be equal to or better than Troy Rear Folding Battle Sight with Dual Aperture BLK, Item # SSIG-DOA-RFBT-00.

4.2.2. Flip-Up Rear Iron Sights: This flip-up rear sight shall be designed to be affixed to standard CBP duty flat top M4 receivers with 1913 Picatinny rails.

The sight shall be affixed to the rail via clamp and cross bolt, requiring a tool for installation and removal. The sight shall be equipped with a minimum of two apertures, a large aperture with an I.D. between .180” and .205” and a small aperture with an I.D. between .065” and .075”. The sight shall allow a no-tool change of apertures by the user. The sight shall be equipped with a windage adjustment feature. The windage adjustment shall require the use of a tool. Each adjustment of the windage shall provide audible and tactile feedback. Each adjustment shall be secure and provide 0.5 MOA. The height of the center of the apertures shall be 1.40” from the top of the Picatinny rail when in the flipped-up position. The height of the sight body shall be no more than .60” higher than the top of the Picatinny rail when in the flipped-down position. The sight shall be able to be flipped up by only swiveling the body of the sight upwards to a locked position. The sight shall remain in the locked position until a de-locking mechanism is pressed by the user. The body of the sight shall be made of hardened T6 aluminum. The remaining components may be constructed of hardened T6 aluminum or stainless steel. Sight shall be black anodized. Performance shall be equal to or better than Troy Rear Folding Battle Sight - Round Aperture BLK, Item # SSIG-FBS-R0BT-00

4.2.3. Flip-Up Front Iron Sights: This flip-up front sight shall be designed to be affixed to a standard height full 1913 Picatinny rails, aligning with the standard CBP duty flat top M4 receivers with 1913 Picatinny rails (same plane). The sight shall be affixed to the rail via clamp and cross bolt, requiring a tool for installation and removal. The sight shall be equipped with a single sighting post with a width of .075”. The sight shall be equipped with an elevation adjustment feature. The elevation adjustment shall require the use of a tool. Each adjustment of the elevation shall provide audible and tactile feedback. Each adjustment shall be secure and provide 0.5 MOA.

The height of the center of the apertures shall be 1.40” from the top of the Picatinny rail when in the flipped-up position. The height of the sight body shall be no more than .60” higher than the top of the Picatinny rail when in the flipped-down position. The sight shall be able to be flipped up by only swiveling the body of the sight upwards to a locked position. The sight shall remain in the locked position until a de-locking mechanism is pressed by the user. The body of the sight shall be made of hardened T6 aluminum. The remaining components may be constructed of hardened T6 aluminum or stainless steel. Sight shall be black anodized. Performance shall be equal to or better than the Troy Industries M4 Folding Front Sight, BLK, Item #

SSIG-FBS-FMBT-00.

4.2.4. 45 Degree Offset Folding Iron Sights: This 45 Degree Offset Folding Iron

Sight shall be designed to be affixed to a standard height full 1913 Picatinny rails, aligning with the standard CBP duty flat top M4 receivers with 1913 Picatinny rails (same plane). The sight shall be affixed to the rail via clamp and cross bolt, requiring a tool for installation and removal. The sight shall be equipped with a single sighting post with a width of .075” (± .01). The sight shall be equipped with an elevation adjustment feature. The elevation adjustment shall require the use of a tool. Each adjustment of the elevation shall provide audible and tactile feedback. Each adjustment shall be secure and provide 0.5 MOA. The height of the center of the apertures shall be 1.40” from the top of the Picatinny rail when in the flipped-up position. The height of the sight body shall be no more than .60” higher than the top of the Picatinny rail when in the flipped-down position. The sight shall be able to be flipped up by only swiveling the body of the sight upwards to a locked position. The sight shall remain in the locked position until a de-locking mechanism is pressed by the user. The body of the sight shall be made of hardened T6 aluminum. The remaining components may be constructed of hardened T6 aluminum or stainless steel. Sight shall be black anodized.

Performance shall be equal to or better than the Troy Ind. 45⁰ Offset Battle Sight Set - HK Front & Round Rear, Item # SSIG-45S-HRBT-00

4.2.5. Handgun MRDS Co-Witness Sight (Rear): Rear Co-witness Sight, specifically manufactured for Gen 5 Glock Models 19 and 47 handguns, .600"/15.24mmH, Square, No Tritium or dots (designed for use with Leupold Delta Point Pro MRDS). Performance shall be equal to or better than AmeriGlo Rear Co-witness Sight, Item # GTR-152.

4.2.6. Handgun MRDS Co-Witness Sight (Front): Handgun MRDS Co-Witness

Sight (Front): Front Co-witness Sight, specifically manufactured for Gen 5 Glock Models 19 and 47 handguns, .115”/2.92mmW, .500"/12.7mmH, No Tritium or Dots (Includes 46091 SCREW) (designed for use with Leupold Delta Point Pro MRDS) Performance shall be equal to or better than AmeriGlo Front Co-witness Sight, Item # GCF-500.

4.2.7. Handgun MRDS Co-Witness Sight (Rear): Handgun MRDS Co-Witness Sight (Rear): Rear Co-witness Sight, specifically manufactured for Gen 5 Glock Models 19 and 47 handguns, Rear Co-witness Sight, .437”/11.074mmH, Square, No Tritium or dots (designed for use with Trijicon RMR MRDS) Performance shall be equal to or better than AmeriGlo Rear Co-witness Sight, Item # GL-404-436.

4.2.8. Handgun MRDS Co-Witness Sight (Front): Front Co-witness Sight, Front Co-witness Sight .090"/2.29mmW, .358"/9.09mmH, No Tritium or Dots (Includes 46091 SCREW) (designed for use with Trijicon RMR MRDS)

Performance shall be equal to or better than AmeriGlo Front Co-witness, Item # GST-360.

4.2.9. Handgun MRDS Co-Witness Sight (Rear): Rear Co-witness Sight, Rear Co-witness Sight, Black Serrated .330”H/ (.410” overall).1 (designed for use with Aimpoint ACRO P2 MRDS) Performance shall be equal to or better than AmeriGlo Rear Sight, Item # GL-424-410.

4.2.10. Handgun MRDS Co-Witness Sight (Front): Front Co-Witness Sight, Front Co-witness Sight, Black Serrated .310H. (designed for use with Aimpoint ACRO P2 MRDS). Performance shall be equal to or better than AmeriGlo Front Sight, Item # GCF-310-115.

4.2.11. Handgun MRDS Co-Witness Sights (Set): Co-witness Sight Set

(Front and Rear), specifically manufactured for Gen 5 Glock Models 19 and 47 handguns, (designed for use with Aimpoint ACRO P2 MRDS).

Performance shall be equal to or better than Ameriglo Black Serrated (includes PN: GL-424-410 (Rear), PN: GCF-310-115 (Front), Item #

GLUSSS-1865

4.3. Miniature Red Dot Sights (MRDS)

4.3.1. Non-magnified Battery Illuminated Miniature Red Dot Sight (MRDS): This sight shall have an optical magnification no greater than 1.08x and contain a maximum of 3.25 MOA, red, LED aiming dot that may be adjustable or fixed.

The sight shall be powered by a single battery with a battery life of more than 35,000 hours at a 50% setting in an average temperature of 70°F. The aiming dot cannot be visible from the front Optic and shall be fully operable and unaffected by operational temperature ranges of -40° F and 120°F and relative humidity levels of up to 95%. The optic sight window shall not be any smaller than 22 mm X 16 mm. Sight shall operate during and after being fully immersed in water. Sight shall be resistant to shock, vibration, and chemical exposure. The dimensions of the sight (without mount) shall not exceed 45 mm by 30 mm by 25 mm. This sight shall be equipped with an integrated mounting system, compatible with multiple mounting options.

Performance shall be equal to or better than Trijicon RMR RM06 Pistol RDS, Adjustable, Red, 3.25 MOA Dot, Item # RM06-C-700688-NS.

4.3.2. Non-magnified Battery Illuminated Miniature Red Dot Sight (MRDS): The optical sight shall be parallax free and have a nominal optical magnification not exceeding 1.1x. The sight must have a red LED aiming dot not to exceed 3.25 MOA in size. The sight shall be powered by a single CR2032 with extended battery life and top mount battery accessibility without the removal of the sight from the firearm. The brightness level may be manually selected or automatically adjusted to the target lighting conditions via a forward-looking photonic sensor. Optics with both manual and automatic modes must allow for easy transition between modes. The sight shall have a lockout feature to hold the dot brightness. The optic may contain both a dot and outer segmented aiming reticle but must be selectable between dot only or dot/reticle configurations. The sight shall be fully operable and unaffected by operational temperature ranges of -40°F and 140°F and relative humidity levels of up to 100%. The optic sight window shall not be smaller than 21 mm x 15 mm. The dimensions of the sight (without mount) shall not exceed 55 mm long x 33 mm wide x 34.0 mm high. The sight shall not weigh more than 2.0 oz with battery and mounting fasteners. The sight when mounted to a duty pistol must allow the use of currently available RDS duty holsters.

The sight must allow use of commonly available co-witness suppressor height sights with the rear sight being mounted behind the optic. The sight shall be fully operational after being submersed in water to a depth of 66 feet for 1 hour. The sight must have a minimum of 120 MOA of adjustment travel in both windage and elevation and be adjustable without the use of special tools. The sight must have audible and tactile clicks with an adjustment of 1 inch at 100 yards per click. The optic must have a commonly available integrated mounting footprint and be compatible with Glock MOS 1 or similar duty pistols. Performance shall be equal to or better than Trijicon RMR HD, Item # RMRHD2-C-3200004-NS.

4.3.3. Non-magnification Battery Illuminated Miniature Red Dot Sight (MRDS):

This sight shall feature an enclosed emitter design for enhanced durability and protection against environmental conditions. The MRDS shall have a scratch-resistant, clear lens with an approximate objective window size of 16 mm x 16 mm. The sight shall provide no magnification (1x) and utilize a fully enclosed reflex collimator LED for principal operation. The reticle shall be a

3.5 MOA red aiming dot, and the sight shall be powered by a single CR2032 battery, which is included. The battery compartment shall be side-mounted, allowing for battery replacement without removing the sight from the firearm.

The battery compartment cover/cap shall be constructed of aluminum with a black finish. The sight shall feature side-mounted brightness adjustments and provide at least 10 illumination settings, including 4 night vision-compatible (NVD) settings and 6 daylight settings. When set to the first and second lowest daytime brightness levels, the aiming dot shall not be visible from the front at a distance of 10 feet. The windage and elevation adjustments shall require the use of a tool and provide positive click adjustments. The sight shall be adjustable in 1 MOA increments. It shall be waterproof and submersible up to 80 feet and remain fully operable and unaffected by operational temperature ranges of -49°F to +160°F. The sight shall include an integrated mounting plate (part number 200520) for attachment to firearms utilizing the Glock Gen 5 MOS sight cut. The body of the sight shall be constructed from high-strength aluminum with a hard anodized black finish for durability. The sight shall be resistant to shock, vibration, and chemical exposure. The dimensions of the MRDS shall not exceed 47 mm in length, 30 mm in width, and 30 mm in height, with a weight of approximately 2.1 ounces. The sight shall be packaged in a cardboard box and include a Micro tool and user manual. Performance shall be equal to or better than the Aimpoint ACRO P-2 Reflex Sight, Item # 201006 (including MOS plate Item # 200520).

4.3.4. Non-magnified Battery Illuminated Miniature Red Dot Sight: This sight shall have an optical magnification no greater than 1x and contain a maximum 2.5 MOA, red, LED aiming dot. This open MRDS shall have a scratch resistant aspheric lens with an objective window size of 25.7 x 17.5

mm. The optic shall be powered by a single CR2032 top mount battery accessible without the removal of the sight from the firearm. Sight shall be equipped with a spring actuated battery compartment allowing battery access and replacement without tools. The sight shall have at least 8 illumination settings. The sight shall have a single point of brightness adjustment be located on the top of the optic for ambidextrous adjustment.

The sight shall have a battery saving feature that senses motion to enter into sleep mode when completely motionless for approximately 5 minutes of nonuse and power up to the last known setting as soon as motion is sensed, extending possible battery life. The windage and elevation adjustments shall require the use of a tool for adjustments. The sight shall have an adjustment range of +/- 60 MOA: adjustable in 1 MOA increments. Sight shall waterproof up to 33 ft. and must be fully operable and unaffected by operational temperature ranges of -20° F and +120°F. Sight shall be equipped with an integrated mounting system, compatible with multiple mounting options. The sight shall be capable of accepting a rear iron sight which dovetails directly into the MRDS housing providing back up iron sights that can be co-witnessed with the reticle. The body of the sight and mount shall be made of high strength aluminum and/or steel that is anodized or coated in durable dark finish. Sight shall be resistant to shock, vibration, and chemical exposure. The dimensions of this MRDS (without mount) shall be not exceed 46.1 mm in length, 33.2 mm in width, 33 mm in height, and weigh approx. 1.9 oz. The sight shall be encased with a semi-permanent stainless steel protective shroud for additional protection and durability.

Performance shall be equal to or better than Leupold DeltaPoint Pro, Item # 119688.

4.3.5. Non-magnified Battery Illuminated Miniature Red Dot Sight: This sight shall have an optical magnification no greater than 1x and contain a maximum 3 MOA, red, LED aiming dot. This open MRDS shall have a molded glass aspheric lens with an objective lens diameter of 30mm. The sight shall be powered by a single CR1632 top mount battery accessible without the removal of the sight from the firearm. The sight shall have 12 illumination settings, including two-night vision settings. The sight illumination controls shall be located on the side of the optic for accessibility.

The sight shall have a battery saving feature that senses motion to power down when motionless after approximately 120 seconds of nonuse and power up to the previous setting as soon as motion is sensed, extending possible battery life to beyond 20,000 hours of normal use at medium setting. The windage and elevation adjustments shall be a lockless zeroing system utilizing twin adjustment springs and require the use of a tool for adjustments. The sight shall have an adjustment range of +/- 50 MOA:

adjustable in 1 MOA increments. Sight shall continually operate during and after being fully submersed in water and maintain a fog proof lens and be IPX-7 rated for complete water immersion up to 1 meter. Sight must be equipped with an integrated mounting system, compatible with multiple mounting options and to include direct mount to Sig Sauer P320 handguns.

The body of the sight and mount shall be made of high strength aluminum and/or steel that is anodized or coated in durable dark finish. Sight shall be resistant to shock, vibration, and chemical exposure. The dimensions of this MRDS (without mount or protective shroud) shall be not exceed 46.5 mm in length, 31.77 mm in width, 27.4 mm in height, and weigh approx. 1.0 oz.

The sight shall include an optional, ruggedized protective shroud for additional protection and durability. Performance shall be equal to or better than Sig Sauer ROMEO 1 PRO, Item # WSOR1P100.

4.3.6. Non-Magnified Battery Illuminated Reflex Sight: This reflex sight shall be designed for use on weapon platforms and feature an open emitter design with a durable, lightweight construction. The housing shall be made of high-strength aluminum or comparable material with a durable black finish to ensure resistance to environmental conditions, including shock, vibration, and chemical exposure. The sight shall provide optical magnification no greater than 1.1x and feature a circle-dot reticle with adjustable brightness settings to accommodate various lighting conditions. The reticle shall be illuminated using a battery-powered LED system for enhanced visibility in low-light environments. The reflex sight shall be compatible with the Pro footprint mounting system, ensuring secure attachment to a variety of weapon platforms. It shall include windage and elevation adjustability, providing precise zeroing capabilities for accurate point-of-aim/point-of-impact alignment. Adjustments shall offer tactile and audible feedback for ease of use. The sight shall function reliably within operational temperature ranges of -30°F to +130°F and maintain performance during and after exposure to water immersion. The overall dimensions of the sight shall not exceed 2.0” in length, 1.3” in width, and 1.1” in height, and the weight shall not exceed 1.4 ounces (including battery). The reflex sight shall be powered by a commonly available battery type, such as CR2032, to ensure continuity of battery inventory. The battery compartment shall feature secure, water-resistant caps to protect against environmental exposure. Performance shall be equal to or better than the Sig Sauer ROMEO X Reflex Sight, Open, Pro Footprint, Circle Dot, Black, Item # WSORX1000.

4.3.7. Non-Magnified Battery Illuminated Compact Reflex Sight: This compact reflex sight shall be designed for use on weapon platforms and feature an open emitter design with a durable, lightweight construction. The housing shall be made of high-strength aluminum or comparable material with a durable black finish to ensure resistance to environmental conditions, including shock, vibration, and chemical exposure. The sight shall provide optical magnification no greater than 1.1x and feature a circle-dot reticle with adjustable brightness settings to accommodate various lighting conditions.

The reticle shall be illuminated using a battery-powered LED system for enhanced visibility in low-light environments. The reflex sight shall be compatible with the compact footprint mounting system, ensuring secure attachment to a variety of weapon platforms. It shall include windage and elevation adjustability, providing precise zeroing capabilities for accurate point-of-aim/point-of-impact alignment. Adjustments shall offer tactile and audible feedback for ease of use. The sight shall function reliably within operational temperature ranges of -30°F to +130°F and maintain performance during and after exposure to water immersion. The overall dimensions of the sight shall not exceed 1.9” in length, 1.2” in width, and 1.0” in height, and the weight shall not exceed 1.3 ounces (including battery). The reflex sight shall be powered by a commonly available battery type, such as CR2032, to ensure continuity of battery inventory. The battery compartment shall feature secure, water-resistant caps to protect against environmental exposure. Performance shall be equal to or better than the Sig Sauer ROMEO-X Reflex Sight, Open, Compact Footprint, Circle Dot, Black, Item # WSORX1200.

4.3.8. Non-Magnified Battery Illuminated Enclosed Reflex Sight: This enclosed reflex sight shall be designed for use on weapon platforms and feature a durable, enclosed emitter design to provide enhanced protection against environmental conditions such as dust, water, and debris. The housing shall be constructed from high-strength aluminum or comparable material with a durable black finish to ensure resistance to shock, vibration, and chemical exposure. The sight shall provide optical magnification no greater than 1.1x and feature a 3 MOA red dot reticle with adjustable brightness settings to accommodate various lighting conditions. The reticle shall be illuminated using a battery-powered LED system for enhanced visibility in low-light environments. The reflex sight shall be compatible with the Pro footprint mounting system, ensuring secure attachment to a variety of weapon platforms. It shall include windage and elevation adjustability, providing precise zeroing capabilities for accurate point-of-aim/point-of-impact alignment. Adjustments shall offer tactile and audible feedback for ease of use. The sight shall function reliably within operational temperature ranges of -30°F to +130°F and maintain performance during and after exposure to water immersion. The overall dimensions of the sight shall not exceed 2.1” in length, 1.4” in width, and 1.3” in height, and the weight shall not exceed

1.5 ounces (including battery). The reflex sight shall be powered by a commonly available battery type, such as CR2032, to ensure continuity of battery inventory. The battery compartment shall feature secure, water-resistant caps to protect against environmental exposure. Performance shall be equal to or better than the Sig Sauer ROMEO-X Reflex Sight, Enclosed, Pro Footprint, 3 MOA Red Dot, Black, Item # WSORX1330.

4.3.9. Non-Magnified Battery Illuminated Enclosed Compact Reflex Sight: This enclosed compact reflex sight shall be designed for use on weapon platforms and feature a durable, enclosed emitter design to provide enhanced protection against environmental conditions such as dust, water, and debris. The housing shall be constructed from high-strength aluminum or comparable material with a durable black finish to ensure resistance to shock, vibration, and chemical exposure. The sight shall provide optical magnification no greater than 1.1x and feature a circle-dot reticle with adjustable brightness settings to accommodate various lighting conditions.

The reticle shall be illuminated using a battery-powered LED system for enhanced visibility in low-light environments. The reflex sight shall be compatible with the compact footprint mounting system, ensuring secure attachment to a variety of weapon platforms. It shall include windage and elevation adjustability, providing precise zeroing capabilities for accurate point-of-aim/point-of-impact alignment. Adjustments shall offer tactile and audible feedback for ease of use. The sight shall function reliably within operational temperature ranges of -30°F to +130°F and maintain performance during and after exposure to water immersion. The overall dimensions of the sight shall not exceed 2.0” in length, 1.3” in width, and 1.2” in height, and the weight shall not exceed 1.4 ounces (including battery). The reflex sight shall be powered by a commonly available battery type, such as CR2032, to ensure continuity of battery inventory. The battery compartment shall feature secure, water-resistant caps to protect against environmental exposure. Performance shall be equal to or better than the Sig Sauer ROMEO-X Reflex Sight, Enclosed, Compact Footprint, Circle Dot, Black, Item # WSORX1400.

4.3.10. Non-Magnified Battery Illuminated TRAINING Miniature Red Dot

Sight (MRDS): The housing of this value centric sight may be constructed of either polymer or metal materials. The lens may be constructed of either glass or polymer materials. The sight may be an open or enclosed emitter design. This training sight shall have an optical magnification no greater than 1.1x and contain a maximum 3 MOA, red, LED aiming reticle. This sight may have brightness, elevation, and windage adjustability. These characteristics may have reduced functionality from duty rated MRDS (i.e., fewer brightness settings, larger incremental movement for elevation and windage adjustments, or reduced durability standards). If the training optic does NOT have windage and elevation adjustments, the sight shall be pre-zeroed for the Glock Gen 5 9mm Blue Force on Force training pistols and be accurate within 6 inches of point of aim/point of impact (POA/POI) at 25 feet.

This training sight shall be available in both red and blue colored housings.

The optic must have a commonly available integrated mounting footprint and be compatible with Glock Gen 5 MOS 1 or similar duty pistols. This sight shall be designed to be utilized on training weapon systems such as red inert training pistols, Non-Lethal Training Handguns (i.e., FX/Simunitions style), and/or laser training pistols. This sight will NOT be utilized on actual firearms. Performance shall be equal to or better than the C&H Precision Red Dot Polymer Training Optic Closed Emitter, Item # RD-PLY-

ACRO-RD.

4.3.11. Non-Magnified Battery Illuminated TRAINING Miniature Red Dot Sight (MRDS):The housing of this training optic shall be constructed of durable polymer materials, designed for value-centric applications. The lens shall be constructed of polymer materials to balance functionality and cost-effectiveness. The sight shall feature an open emitter design and provide optical magnification no greater than 1.1x. It shall include a maximum 3 MOA red LED aiming reticle for precise targeting during training exercises.

This training optic shall offer brightness, elevation, and windage adjustability. These adjustments may have reduced functionality compared to duty-rated MRDS, such as fewer brightness settings, larger incremental movements for elevation and windage adjustments, or reduced durability standards. If the training optic does not include windage and elevation adjustments, the sight shall be pre-zeroed for Glock Gen 5 9mm Blue Force on Force training pistols and maintain accuracy within 6 inches of point of aim/point of impact (POA/POI) at 25 feet. The training optic shall be available in both red and blue-colored housings to support training identification needs. It must feature a commonly available integrated mounting footprint and be compatible with Glock Gen 5 MOS 1 or similar duty pistols. This optic shall be specifically designed for use on training weapon systems, including red inert training pistols, Non-Lethal Training Handguns (e.g., FX/Simunitions style), and/or laser training pistols. It shall not be utilized on actual firearms. Performance shall be equal to or better than the C&H Precision Red Dot Polymer Training Optic Open Emitter (RMR), Item # RD-PLY-RMR-RD.

4.4. Non-Magnified Optics

4.4.1. Non-Magnified Tube Type Battery Powered Red Dot Optic w/semi-permanent mount: This rifle mounted tube type reflex optic shall have a clear optical aperture with a diameter between 25 mm and 27 mm. The optic shall provide no magnification (1x) and contain a 2 MOA, red, LED aiming dot. Reticle brightness shall have a minimum of 6 daytime settings and shall be compatible with Night Vision Devices, by providing at least 3 reticle image brightness settings that do not bloom when viewed with night vision devices. The optic shall be powered by a single battery with a battery life of more than 20,000 continuous hours when optic is set to display the aiming dot at 70% of full illumination at 70°F. The aiming dot shall not be visible from the front at a distance of 10’ when optic is set at the first and second lowest daytime settings. The windage and elevation adjustments shall be covered and require the use of a tool for adjustments. Each adjustment must provide audible and tactile feedback. Each adjustment shall be secure and provide approximately 0.5 MOA adjustments, with a total minimum adjustment range of 34 MOA. Optic shall be fully operable and unaffected by operational temperature ranges of -30° F and 130°F and relative humidity levels of up to 95%. Optic shall be equipped with an integrated quick attach/detach mounting system, compatible with a 1913 Picatinny rail, providing an absolute co-witness with an “F” marked front sight post. The body of the optic and mount shall be made of high strength aluminum and/or steel that is anodized or coated in durable black finish.

Optic and mount shall operate during and after being fully immersed in water. Optic and mount shall be resistant to shock, vibration, and chemical exposure. The dimensions of the optic (without mount) shall not exceed 47 mm in height, 126 mm in length, or 49 mm in width. Performance shall be equal to or better than Aimpoint PRO w/ absolute co-witness riser and LRP mount, Item # 200374.

4.4.2. Non-Magnified Battery Powered Red-Dot Optic w/semi-permanent mount:

This rifle mounted tube type reflex optic shall have a clear optical aperture with a diameter between 18 mm and 21 mm. The optic shall have a front flip-up lens cover and a transparent rear flip-up lens cover included. The optic shall provide no magnification (1X) and contain a 2 MOA, red, LED aiming dot. Reticle brightness shall have a minimum of 8 daytime settings and shall be compatible with Night Vision Devices, by providing at least 4 reticle image settings that do not bloom when viewed with night vision devices. The optic shall be powered by a single battery with a battery life of more than 20,000 continuous hours when optic is set to display the aiming dot at 70% of full illumination in 70°F. The aiming dot shall not be visible from the front at a distance of 10’ when optic is set at the first and second lowest daytime settings. The windage and elevation adjustments shall be covered and require the use of a tool for adjustments. Each adjustment shall provide audible and tactile feedback. Each adjustment shall be secure and provide approximately 0.5 MOA adjustments, with a total minimum adjustment range of 34 MOA. Optic shall be fully operable and unaffected by operational temperature ranges of -30° F and 130°F and relative humidity levels of up to 95%. Optic shall be equipped with a quick attach/detach mounting system, compatible with a 1913 Picatinny rail, providing an absolute co-witness with an “F” marked front sight post. The body of the optic and mount shall be made of high strength aluminum and/or steel that is anodized or coated in durable black finish. Optic and mount shall operate during and after being fully immersed in water. Optic and mount shall be resistant to shock, vibration, and chemical exposure. The dimensions of the optic (with mount) shall not exceed 68 mm in height, 73 mm in length, or 48 mm in width. Performance shall be equal to or better than the Aimpoint Micro T-2 w/ absolute co-witness riser and LRP mount, Item # 200198.

4.4.3. Non-Magnified Battery Powered Red-Dot Sight w/semi-permanent mount:

This rifle mounted tube type reflex optic shall be operationally parallax-free equipped with a clear optical aperture with a diameter between 18 mm and 21 mm. The sight shall have a front flip-up lens cover and a transparent rear flip-up lens cover included. The optic shall provide no magnification (1X) and contain a 2 MOA, red, LED aiming dot. Reticle brightness shall have a minimum of 6 daytime settings and shall be compatible with Night Vision Devices, by providing at least 4 reticle image settings that do not bloom when viewed with night vision devices. The optic shall be powered by One AAA size, 1.5 V Alkaline LR03, or Lithium FR03 battery with a battery life of more than 50,000 continuous hours when optic is set to display the aiming dot at 70% of full illumination in 70°F. The aiming dot shall not be visible from the front at a distance of 10’ when optic is set at the first and second lowest daytime settings. The windage and elevation adjustments shall be covered and require the use of a tool for adjustments.

Each adjustment shall provide audible and tactile feedback. Each adjustment shall be secure and provide approximately 0.36 MOA adjustments, with a total minimum adjustment range of 34 MOA. Optic shall be fully operable and unaffected by operational temperature ranges of -49° F and +160°F and relative humidity levels of up to 95%. The optic w/ mount configuration shall include a 39mm spacer and LRP (Lever Release Picatinny) base that attaches to MIL-STD-1913 rails with a quick detach mechanism providing an absolute co-witness with an “F” marked front sight post. The body of the optic and mount shall be made of high strength aluminum and/or steel that is anodized or coated in durable black finish.

Optic shall be submersible to 150 feet (45 meters) and optic and mount shall operate during and after being fully immersed in water. Optic and mount shall be resistant to shock, vibration, and chemical exposure. The dimensions of the optic (w/o mount) shall not exceed 41 mm in height, 83 mm in length, or 40 mm in width. The dimensions of the optic (with mount) shall not exceed 71 mm in height, 85 mm in length, or 40 mm in width. The optic alone shall not weigh more than 5.2 oz. Performance shall be equal to or better than the Aimpoint Comp M5 w/ absolute co-witness riser and LRP mount, Item # 200386.

4.4.4. Non-Magnified Battery Powered Red-Dot Optic w/semi-permanent mount:

This rifle mounted tube type reflex optic shall have a clear optical aperture with a diameter between 18 mm and 21 mm. The optic shall have a front flip-up lens cover and a transparent rear flip-up lens cover included. The optic shall provide no magnification (1X) and contain a 2 MOA, red, LED aiming dot. Reticle brightness shall have a minimum of 6 daytime settings and shall be compatible with Night Vision Devices, by providing at least 4 reticle image settings that do not bloom when viewed with night vision devices. The optic shall be powered by a single battery with a battery life of more than 30,000 continuous hours when optic is set to display the aiming dot at 70% of full illumination in 70°F. The aiming dot shall not be visible from the front at a distance of 10’ when optic is set at the first and second lowest daytime settings. The windage and elevation adjustments shall be covered and require the use of a tool for adjustments. Each adjustment shall provide audible and tactile feedback. Each adjustment shall be secure and provide approximately 0.5 MOA adjustments, with a total minimum adjustment range of 34 MOA. Optic shall be fully operable and unaffected by operational temperature ranges of -49°F to +160°F and relative humidity levels of up to 95%. Optic shall be equipped with a quick attach/detach mounting system, compatible with a 1913 Picatinny rail, providing an absolute co-witness with an “F” marked front sight post. The body of the optic and mount shall be made of high strength aluminum and/or steel that is anodized or coated in durable black finish. Optic and mount shall operate during and after being fully immersed in water. Optic and mount shall be resistant to shock, vibration, and chemical exposure. The dimensions of the optic (with mount) shall not exceed 68 mm in height, 73 mm in length, or 48 mm in width. Performance shall be equal to or better than the Aimpoint Duty RDS™ Red Dot Sight - One-piece Torsion Nut Mount, 39mm, Item # 200759.

4.4.5. Non-Magnification Battery Powered Compact Red Dot Optic with mount:

This optic shall have night vision capabilities to include a dedicated button with four (4) night vision illumination settings and 15 levels of daytime brightness settings. The reticle on the optic shall have an enhanced battle reticle for close quarter combat (CQC) applications. The reticle shall have a 1 MOA dot and a 65 MOA “circle” around it with a triangle at the 6 o’clock position to be utilized for CQC or mechanical offset. The optic shall be fully coated to increase light transmission with multiple anti-reflective coatings on all air to glass surfaces. The optic shall have IPX8 waterproofing to prevent moisture, dust, and debris from penetrating the sight to ensure performance in all environments. The overall finish of the optic shall be corrosion and wear resistant with low-glare matte surface. The lenses of the optic shall have a scratch-resistant coating that protects the exterior from scratches, oil and dirt. This optic shall have an integrated absolute co-witness mount that is capable of quick attach/detach and shall mount on any MIL-STD-1913 Picatinny. Optic and mount shall be resistant to shock, vibration, and chemical exposure. Performance shall be equal or better than the Vortex AMG UH-1 GEN II and QD mount, Item # AMG-HS02.

4.4.6. Non-Magnification Battery Powered Compact Red Dot Optic with mount:

This closed red dot optic shall have an overall length of no more than 3.6”, an overall height of no more than 2.6”, an overall width no more than 2.3”, and weigh no more than 13.8 oz. The optic shall have four (4) different integrated reticle options (Dot, Circle-Dot, Dot with Holds, and Circle-Dot with Holds). The optic shall have motion activated illumination which allows it to power up and power down when sensing motion. The optic shall be waterproof, IPX-8 rated, and fog proof. Optic shall have a readily available CR123A battery placement for ease and quick battery replacement. The optic shall come with lens covers and a removable titanium shroud to protect sight from drops and bumps. The optic shall mount on any MIL-STD-1913 Picatinny, and mount height of less than 1.65”. Optic and mount shall be resistant to shock, vibration, and chemical exposure. Performance shall be equal or better than SIG Romeo 8T 1x38 mm, Item # WSOR81002 (black), WSOR81003 (fde).

4.4.7. Non-Magnified Battery Powered Increased Objective Lens Optic w/ standard semi-permanent mount: The optical sight shall be parallax free and have a nominal optical magnification not exceeding 1.1x. The sight must have a red LED aiming dot not to exceed 2 MOA in size with a 68 MOA outer segmented circle. The sight shall be powered by a single, commonly available, battery. The battery should be able to be changed without removing the sight from the mounting surface. The brightness level shall be manually selected by a control knob that allows ambidextrous operation.

The reticle illumination knob shall have an “off” position between daylight 2 and 3 for both dot only and circle dot, and off position between daylight 6 circle dot and daylight 6 dot only. The brightness knob must be easily manipulated with gloved hands and provide tactile feedback during manipulation. The optic may contain both a dot and outer segmented aiming reticle but must be selectable between dot only or dot/reticle configurations.

The aiming dot must not be visible as viewed from the front of the sight at a minimum distance of 21 feet when the user brightness level is optimal for the lighting conditions. The illumination setting must have at least 2 Night Vision settings. The sight shall be fully operable and unaffected by operational temperature ranges of -60°F and 140°F and relative humidity levels of up to 95%. The optic clear aperture shall not be smaller than 20.4mm. The optic shall not have a smaller Field of View (FOV) than 22m @ 100m when having 2.5” of eye relief (12.4 degrees). The dimensions of the sight (without mount) shall not exceed 74 mm long x 43mm wide x 53mm high. The sight shall not weigh more than 4.7 oz with battery and without mount. The sight when mounted to a duty rifle must allow the use of currently available red dot sight magnifiers. The sight must allow use of commonly available rifle iron sights that are currently mounted. The sight shall be fully operational after being submersed in water to a depth of 100 feet for 1 hour. The sight must have a minimum of 70 MOA of adjustment travel in both windage and elevation and be adjustable without the use of special tools. The sight must have audible and tactile clicks with an adjustment of 1/2 MOA per click. The Optic shall be equipped with an integrated mounting system, in a Co-witness configuration, mountable to a CBP-issued M4 with a flat top 1913 Picatinny rail. The optic must be multi-weapon capable including readily available mounting solutions for rifle and shotgun applications. Performance shall be equal to or better than Trijicon Miniature Rifle Optic HD (MRO-HD), Item # MRO-C-2200064-NS.

4.4.8. Non-Magnified Battery Powered Holographic Optic: This holographic sight shall include 7 MM raised quick detach base for lower 1/3 iron sight co-witness. Optic mounting system shall be compatible with a 1913 Picatinny rail. The optic shall provide no magnification (1x) and contain a red 1 MOA dot and 68 MOA aiming circle. The optic shall have three (3) different integrated reticle options (One Dot Reticle, Two Dot Reticle, and Four Dot Reticle with Holds). The optic shall have 20 daylight settings and 10 additional settings for night vision devices. The optic shall be powered by a single battery with a battery life of more than 1,000 continuous hours at normal setting 12, at 70°F. The optic shall have an adjustment of .5 MOA increments. Optic shall have side mounted power and brightness adjustment switches. The body of the optic and mount shall be made of high strength aluminum and/or steel that is anodized or coated in durable black or tan finish. Optic and mount shall continually operate during and after being fully immersed in water. Optic and mount shall be resistant to shock, vibration, and chemical exposure. The dimensions of the optic (with mount) shall not exceed 97 mm in height, 74 mm in length, or 59 mm in width. Performance shall be equal to or better than EOTech HWS EXPS3, Item # EXPS3-0-BLK (black), EXPS3-0-TAN (tan).

4.5. Magnified Optics

4.5.1. Magnified Non-Battery Illuminated Optic: This rifle optic shall have an objective lens between 23 mm and 25 mm. The sight shall have a fixed optical magnification of 1.5X. The field of view shall be a minimum of 4.9 degrees. The reticle shall have a dual illuminated red 8 MOA triangle reticle.

The optic shall feature a fiber optic illuminated reticle that adjusts the brightness based on available ambient light and a back-up illumination by tritium or equivalent, providing reticle illumination for a minimum of 12 years continuous use. The optic shall have an eye relief between 3 and 4 inches.

The windage and elevation adjustments shall be covered and require the use of a tool for adjustments. The optic shall be adjustable in approximately .5 MOA increments. Optic shall be fully operable and unaffected by operational temperature ranges of -30° F and 130°. Optic shall be equipped with an integrated mounting system (TA60 or equivalent), mountable to a CBP-issued M4 with a flat top 1913 Picatinny rail. The overall dimensions of the optic (without mount) shall not exceed (L x W x H) 147 mm x 41 mm x 53 mm. The body of the optic and mount shall be made of high strength aluminum and/or steel that is anodized or coated in durable black finish. The optic shall operate during and after being fully immersed in water. Optic and mount shall be resistant to shock, vibration, and chemical exposure.

Performance shall be equal to or better than the Trijicon TA45-C-400180:

1.5x24, Item # TA45-C-400180-NS.

4.5.2. Magnified Non-Battery Illuminated Optic: This rifle optic shall have an objective lens between 31 mm and 33 mm. The sight shall have a fixed optical magnification of 4X. The field of view shall be a minimum of 7 degrees. The reticle shall have a dual illuminated red 5.53 MOA triangle reticle. The optic shall feature a fiber optic illuminated reticle that adjusts the brightness based on available ambient light and a back-up illumination by tritium or equivalent, providing reticle illumination for a minimum of 12 years continuous use. The optic shall have an eye relief between 1 and 1.5 inches.

The windage and elevation adjustments shall be covered and require the use of a tool for adjustments. The optic shall be adjustable in approximately .44 MOA increments. Optic shall be fully operable and unaffected by operational temperature ranges of -30° F and 130°. Optic shall be equipped with an integrated mounting system (TA51 or equivalent), mountable to a CBP-issued M4 with a flat top 1913 Picatinny rail. The overall dimensions of the optic (without mount) shall not exceed (L x W x H) 150 mm x 58 mm x 74 mm. This optic shall be compatible with optional standard optic mount specified in section 4.7.2 of this document. The body of the optic and mount shall be made of high strength aluminum and/or steel that is anodized or coated in durable black finish. The optic shall continually operate during and after being fully immersed in water. Optic and mount shall be resistant to shock, vibration, and chemical exposure. Performance shall be equal to or better than the Trijicon TA31F: 4X32, Item # TA31F-100261-NS.

4.5.3. Variable Magnification Battery Powered Illuminated Optic: This rifle mounted optic shall have a clear optical aperture with an objective lens diameter between 23 mm and 25 mm. The optic shall provide variable magnification of 1x to 6x. The optic shall be able to quickly transition from 1x to 6x using an integrated dial fin, allowing easy transition through magnification settings. Field of view shall be 18 degrees at 1x and 3 degrees at 6x. The reticle shall be first focal plane and the pattern shall be a segmented circle with crosshair and milliradian (MIL) sub tension lines compatible with multiple calibers and bullet weights. Eye relief shall be a constant distance between 3.5 inches and 4.5 inches regardless of magnification setting. The reticle shall have at least 6 adjustable brightness settings and shall be LED illuminated in red. The optic shall be powered by a single battery with a battery life of at least 700 continuous hours when optic is set to illuminate the reticle at a 65% brightness setting. The illuminated reticle shall not be visible from the front.