SOW_Copier Lease and Services - FINAL.pdf
PDF 251 KB Posted
- Attached to
- Copiers Lease and Services
- Solicitation number
- 70B03C27Q00000012
About this file
This is a Statement of Work (SOW) for Customs and Border Protection (CBP), Office of Field Operations San Diego Field Office, for copier lease and services.
CBP seeks to lease 74 multifunction copiers distributed across 13 locations throughout its San Diego Area of Responsibility, including ports of entry in San Diego, Calexico, Tecate, and Winterhaven, California. The copier fleet comprises 13 color mid-volume units, 8 color high-volume units, and 53 black and white mid-volume units. All copiers must be Energy Star certified with specifications including 50-69 copies per minute, 2,000-page paper tray capacity, and capabilities for hole punch, collate, staple, duplex, auto feed, sort, network security, color and black and white scanning, and hard drive data encryption. Copiers must support minimum 1,000 user-number authentication, scan speeds of 30 images per minute in TIFF/PDF/JPG formats at 600x600 DPI resolution, and comply with ANSI and UL standards. The contractor must deliver, install, and ensure all copiers are fully operational by February 1, 2027, prior to the period of performance start.
The contractor shall provide comprehensive lease services including all maintenance, labor, and consumable supplies (toner, drums, parts, adaptors, staples, cartridges) at no additional cost with a flat monthly rate. The contractor must respond to maintenance requests within four working hours and dispatch qualified technicians within two business days of formal notice. Replacement copiers must be provided within two weeks for unrepairable units at no additional government cost. The contractor shall provide toner recycling programs, up to 30 minutes of operator training per location, and documentation including Operation/Owner's Manual and Equipment Specifications in both paper and electronic formats (MS Word or PDF). The anticipated period of performance is a firm-fixed-price base year (February 1, 2027 – January 31, 2028) plus four optional 12-month periods through January 31, 2032, exercisable at CBP's discretion. Work shall be completed during normal hours (7:00 AM – 4:00 PM, Monday-Friday) excluding federal holidays. The contractor must comply with HSPD-12 personnel security requirements, wear employee identification badges, and meet DHS IT security requirements including NIST SP 800-53 compliance and firmware/patch updates. Contact: Jesus Solis, Contract Specialist, JESUS.SOLIS@cbp.dhs.gov.
View the file
Other files
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Statement of Work Customs and Border Protection
Office of Field Operations San Diego Field Office Copier Lease and Services
1. BACKGROUND
The U.S. Department of Homeland Security (DHS), Customs and Border Protection (CBP) San Diego Field Office (SDFO) is responsible for safeguarding the homeland and beyond our borders along the Southwest Border in California. Individuals requesting entry into the U.S. must enter at one of the designated Ports of Entry. CBP Officers assess individuals requesting entry into the U.S. and take Law Enforcement action as necessary to include detaining and processing persons of interest.
All records must be retained in accordance with the U.S. National Archives and Records Administration (NARA) General Records Schedule (GRS). To accomplish this, the San Diego Field Office has a continued need for leasing, maintenance, and furnishing supplies for multifunction copiers.
2. SCOPE
It is the intent of SDFO to lease 74 multifunction copiers and throughout SDFO’s Area of Responsibility (AOR) at a flat monthly rate including maintenance and necessary supplies. Copiers shall be delivered and installed at the locations listed in Section 4.B, Locations and Quantities for Copier Delivery. Lease of the copiers shall include all supplies including but not limited to toner, drums, parts, adaptors, staples and cartridges, maintenance, and labor at no additional cost; and copiers shall be Energy Star certified.
Contractor shall provide maintenance and support services throughout the duration of the contract. The contractor shall coordinate and conduct training on the use of copiers for government staff. Prior to the start of the period of performance, the contractor shall deliver, install, train and ensure all 74 multifunction copiers are fully operational to avoid disruption of government operations.
3. APPLICABLE DOCUMENTS
• Section 508 of the Rehabilitation Act of 1973
• Architectural and Transportation Barriers Compliance Board’s Electronic and
Information Technology Accessibility Standards
• Executive Order 13123, Greening the Government through Efficient Energy
Management
• Executive Order 13221, Energy-Efficient Standby power Devices
4. DELIVERABLES
A. Device Requirements Contractor shall provide 74 multifunction copiers, delivering them to the locations as specified in Section 4B, and ensure they are installed and fully operational no later than the start of the period of performance, February 01, 2027.
Copier Specifications:
• 50-69 copies per minute.
• Paper Tray Capacity: 2,000 pages, 8 ½ x 11, 8 ½ x 14 drawer, and 11 x 17 drawers.
Each of the multifunction copiers shall also include the listed features:
• Hole punch, collate, staple, duplex, auto feed, and sort.
• Supports minimum 1,000 user-number authentication on device.
• Network security, printing, and scanning.
• Color and black & white scan capability.
• Scan image formats in TIFF, PDF, JPG; scan resolution up to 600 x 600 DPI.
• Scan speed of 30 images per minute; scan destinations: email, network folder.
• Capability to print transaction and activity reports.
• Hard drive data encryption or automatically erase/overwrite from the hard drive after each job.
• Retain configuration state (passwords service settings, etc.) after power down or reboot; does not reset to default settings.
• Administrative options and device settings shall be password protected.
• Capable of preventing downloads from external websites. Copiers shall utilize only HTTPS for any approved web enabled services. Wireless capabilities shall be disabled on all copiers.
• Vendor verification devices are not dependent on XML PARCER 4 (Prohibited).
• Operating features should conform to the requirements of the American National
Standards Institute (ANSI) and Underwriters Laboratories (UL).
Copier Quantities and Color Specifications:
Type QTY Color - Mid Volume (2,000 – 10,000 Sheets Per Month)
Color - High Volume (10,000 – 70,000 Sheets Per Month)
Black and White - Mid Volume (2,000 – 10,000 Sheets Per Month)
Black and White - High Volume (10,000 – 70,000 Sheets Per Month)
Total 74
B. Locations for Copier Delivery and Requirements
Otay Mesa Cargo- 2500 Paseo Internacional, San Diego, CA 92154.
• Black and white- Mid volume: 4
• Color- Mid volume:1
Otay Mesa FP&F- 9725 Via De La Amistad, San Diego, CA 92154.
• Black and white- Mid volume: 4
• Color- High volume: 1
Otay Mesa Export- 9495 Customhouse Plaza, San Diego, CA 92154.
• Black and white- Mid volume: 3
• Color- Mid volume: 2
Otay Mesa Port of Entry- 9777 Via De La Amistad, San Diego, CA 92154.
• Black and white- Mid volume: 6
• Color- Mid volume: 3
San Ysidro Port of Entry- 720 E. San Ysidro Blvd., San Diego, CA 92173.
• Black and white- Mid volume: 11
• Color- Mid volume: 5
• Color- High volume: 7
K9 Facility- 6651 Gateway Park Dr., San Diego, CA 92154.
• Black and white- Mid volume: 1
Andrade Port of Entry- 235 Andrade Rd., Winterhaven, CA 92283.
Calexico East Port of Entry- 1699 E. Carr Rd., Calexico, CA 92231.
• Black and white- Mid volume: 8
• Color- Mid volume: 1
Calexico Airport- 801 W. Second St., Calexico, CA 92231.
Calexico West- 200 E. First St., Calexico, CA 92231.
• Black and white- Mid volume: 9
Port of San Diego- 3835 N. Harbor Dr., San Diego, CA 92101.
• Black and white- Mid volume: 2
Tecate Port of Entry- 405 Tecate Rd., Tecate, CA 91980.
• Black and white- Mid volume: 3
San Diego Field Office- 880 Front St., San Diego, CA 92101.
• Color- Mid volume: 1
C. Copier Maintenance
The contractor shall provide ongoing maintenance and support services including on-call support for issues that arise, replacement of consumables as needed, repair services for any hardware malfunctions, and software and firmware updates to ensure optimal performance and security.
The contractor shall respond to all maintenance requests within four (4) working hours of initial notification. In the event of a reported equipment malfunction or service request, the Contractor is responsible for sending a qualified technician within two (2) business days of receiving formal notice.
When a copier is malfunctioning and can no longer be repaired, the Contractor shall provide a replacement unit of the exact same make and model within two (2) weeks of that determination. Replacement machine must be delivered and installed at no cost to the government.
Ongoing maintenance and support services for the copiers shall include all labor and supplies including but not limited to toner, drums, parts, adaptors, staples and cartridges, maintenance, and labor at no additional cost. The contractor shall have an adequate inventory of copiers to provide backup support.
D. Copier Supplies
Contractor shall provide consumable supplies (except copy/copier paper and transparency films) to include but not limited to toner, drums, staples, staple cartridges, surge protectors or equivalent, and adaptors. The contractor shall provide an adequate quantity of supplies for each respective facility.
For machines designated as high-volume equipment, the Contractor shall permit and fulfill orders for multiple toner cartridges, drums, waste containers, or other parts and equipment required by the machine. To prevent operational delays and accommodate heavy printing demands, the government will request an appropriate inventory of on-site back up toner supplies to ensure no lapses in machine functionality.
E. Toner Recycling
It is the responsibility of the Contractor to provide a recycling program for all used toner and ink cartridges associated with the copy machines under this contract. Each tone replacement must include a return shipping label for a toner recycling program.
F. Training
Contractor shall provide training to CBP personnel on how to properly operate copiers.
Training shall be up to 30 minutes in length and include, at a minimum:
• The basic operation of the copiers (print, copy, scan).
• Location and procedures for installing consumables such as toner, staples, paper, etc.
• Troubleshooting common issues (i.e., paper jams).
• Use of special features including but not limited to duplexing, enlargements, reductions, etc.
The contractor shall provide access to training materials that meet the initial ordering activity’s key operator training requirements within 30 business days of order award unless otherwise specified by the ordering activity.
G. Billing
The Contractor shall submit proper, itemized invoices on a monthly basis. To ensure timely processing and payment, each invoice must include all required supporting documentation.
H. Data
The contractor shall provide copies of the documents listed below. One copy of the data shall be delivered in paper form and one copy in electronic form. The electronic copy shall be in MS Word or PDF format. The documents are deliverables under the contract and shall be delivered at the time equipment is delivered.
• Operation/Owner’s Manual
• Equipment Specifications
The contractor shall deliver all equipment at the beginning of the period of performance and remove all equipment at the end of the period of performance, at no additional cost to the Government.
5. ANTICIPATED PERIOD OF PERFORMANCE
CBP intends to award a firm-fixed price base period (12 months) plus four 12-months option periods.
Base Year: February 1, 2027 – January 31, 2028 Option Year 1: February 1, 2028 – January 31, 2029 Option Year 2: February 1, 2029 – January 31, 2030 Option Year 3: February 1, 2030 – January 31, 2031 Option Year 4: February 1, 2031 – January 31, 2032
Exercising option years is solely at the discretion of CBP and dependent on ongoing needs and requirements.
6. GOVERNMENT-FURNISHED EQUIPMENT (GFE) AND INFORMATION (GFI)
Not applicable.
7. SECURITY
A. Personnel Security Requirements
Contractor personnel shall comply with all rules and regulations and follow required security procedures at each facility. Contractor personnel shall comply with Homeland Security Presidential Directive 12 (HSPD-12), Policy for a Common Identification Standard for Federal Employees and Contractors.
B. Employee Identification
Contractor personnel shall wear an identification badge that, at a minimum, displays the company’s name, employee’s photo, and employee’s name. Contractor personnel shall comply with all Government rules and regulations while at a CBP facility.
C. IT Security Requirements for Multifunction Copier Devices
• DHS will provide Sensitive Systems Configuration Guidance, which includes multiple documents, to the contractor that is applicable to their copiers operating systems, unless those systems use a proprietary software or operating system that is not familiar to DHS.
• Contractor shall install the most recent version of Firmware, operating system, service, and application security software updates without jeopardizing the security of the device or network it is attached.
• Contractor shall install patches (or document the reason patching is not necessary) and comply with the technical requirements set forth in NIST SP 800-53.
• Contractor shall provide guidance and assist DHS to comply with NIST SP 800-53 managerial and operational requirements with the proposed devices, including documenting the necessity or lack of necessity to install patches.
• All removeable memory chips/cards, removeable hard drives, and optional physical locks to secure internal parts capable of storing DHS information shall be surrendered to an appropriate DHS/CBP security official for destruction. Contractor shall provide guidance on destruction methods.
8. PERFORMANCE REQUIREMENTS
All work shall be completed during normal operating hours of 7:00 AM to 4:00 PM Monday through Friday except for the following legal federal holidays:
• New Year’s Day
• Martin Luther King, Jr Day
• President’s Day
• Memorial Day
• Juneteenth
• Independence Day
• Labor Day
• Columbus Day
• Veterans Day
• Thanksgiving Day
• Christmas Day
A. Environmental Management
To comply with Federally mandated environment preference programs and DHS Green Procurement Program policy, CBP requires the use of environmentally preferable products and services.
These program elements include recovered material products, energy and water efficient products, alternative fuels and fuel efficiency, bio-based products, non-ozone depleting substances, priority chemicals, and environmentally preferred products. These program elements are described on the Office of the Federal Environment Executive website at http://www.ofee.gov.
9. CHANGES TO THE SOW
No changes to this Statement of Work or cost shall be incurred without prior approval of the Contracting Officer (CO) and coordinated by the Contracting Officer’s Representative (COR). The CO is the only individual with the authority to amend this contract. Any changes or cost increases will not take effect until the CO executes a written modification. Only the CO has the authority to represent the Government in cases where the task order requires a change in the terms and conditions, delivery schedule, scope of work and/or price of the products and/or services under this task order.
10. POINTS OF CONTACT (POC)
Contracting Specialist (CO) Jesus Solis Contract Specialist JESUS.SOLIS@cbp.dhs.gov http://www.ofee.gov/
No changes to this Statement of Work or cost shall be incurred without prior approval of the Contracting Officer (CO) and coordinated by the Contracting Officer’s Representative (COR). The CO is the only individual with the authority to amend this con...
File details come from the government source that posted it. Updated .