7.Cherry Point FRP Shop Drawings.pdf
PDF 820 KB Posted
- Attached to
- Hoist Platform Fabrication Federal contract opportunity
- Solicitation number
- N6426724Q0085
About this file
This document is a solicitation for the fabrication of a hoist platform. The Department of the Navy Naval Sea Systems Command is seeking quotes for this noncommercial item requirement. This is an all-or-none solicitation, and partial quotes will be deemed unresponsive. The Government will award a single purchase order to the responsible offeror whose quote conforms to the requirements and is most advantageous based on the stated evaluation criteria. Offerors must be registered in SAM, and quotes are due by the response date in the posting. Responses are to be submitted electronically. Any amendments will be published on the website, and offerors are responsible for checking for updates. The solicitation does not contain a Performance Work Statement or Statement of Objectives, but rather provides detailed technical drawings and specifications for the required hoist platform components.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| Solicitation Amendment N6426724Q0085-0001.pdf | ||
| Question and Answer for Solicitation N6426724Q0085.pdf | ||
| 5. BNJ REDACTED.pdf | ||
| 13. N6426724Q0085_Solicitation.pdf |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
87.75
.0
1.75
89.50
15.25
.0
.3
.0
47.34
53.04 54.76
78.51
.7
.0
80.23
89.50
.8
5 0
67.47
8.00
NOTES:
1. FRP BEAM SHALL BE WIDE FLANGE BEAM BEDFORD REINFORCED PLASTICS PART NUMBER
WFB8X8X1/2GY22-401
2. APPROVED FOR PUBLIC RELEASE; DISTRIBUTION IS UNLMITED
3. QUANTITY TAKE OFF: 1
0.56 THRU
1.50 THRU
0.56 THRU
0.53 THRU
0.40 THRU
0.005
APPLICATION
USED ON
A A
B B
C C
D D
H-201
FRP
MATERIAL
INTERPRET GEOMETRIC Box Hoist Column left
DO NOT SCALE DRAWING
H-201
SHEET 1 OF 1
UNLESS OTHERWISE SPECIFIED:
SCALE: 1:10 WEIGHT:
REVDWG. NO.
D
SIZE
TITLE:
NAME DATE
COMMENTS:
Q.A.
MFG APPR.
ENG APPR.
CHECKED
DRAWN
Length 89.5", HOIST, Control
TOLERANCING PER:
FINISH
DIMENSIONS ARE IN INCHES
TOLERANCES:
FRACTIONAL
ANGULAR: MACH BEND
TWO PLACE DECIMAL 0.01
THREE PLACE DECIMAL
NEXT ASSY
0 0
1.75
87.75 89.50
.0
.3
74.25
.1
9.29 11.01
22.03
34.76 36.48
42.16
45.50 47.50
89.50
.0
.2
.9
7 0
0.56 THRU
1.50 THRU
NOTES:
1. FRP BEAM SHALL BE WIDE FLANGE BEAM BEDFORD REINFORCED PLASTICS PART
NUMBER
WFB8X8X1/2GY22-401
2. APPROVED FOR PUBLIC RELEASE; DISTRIBUTION IS UNLMITED
3. QUANTITY TAKE OFF: 1
0.005
APPLICATION
USED ON
A A
B B
C C
D D
H-202
FRP
TOLERANCING PER:
Length 89.5", HOIST, Right
DO NOT SCALE DRAWING
H-202
SHEET 1 OF 1
UNLESS OTHERWISE SPECIFIED:
SCALE: 1:10 WEIGHT:
REVDWG. NO.
D
SIZE
TITLE:
NAME DATE
COMMENTS:
Q.A.
MFG APPR.
ENG APPR.
CHECKED
DRAWN
MATERIAL
INTERPRET GEOMETRIC
FINISH
Control Box Hoist Column
DIMENSIONS ARE IN INCHES
TOLERANCES:
FRACTIONAL
ANGULAR: MACH BEND
TWO PLACE DECIMAL 0.01
THREE PLACE DECIMAL
NEXT ASSY
0.56 THRU
0.56 THRU
0.40 THRU
35.91 37.84 40.66 42.59
78.50
.0
.0
.0
.0
6.00
18.00
2.00
72.50
76.50 78.50
.0
.3
60.50
0.005
APPLICATION
USED ON
A A
B B
C C
D D
H-203
FRP
TOLERANCING PER:
Length 78.5", HOIST, Support
DO NOT SCALE DRAWING
H-203
SHEET 1 OF 1
UNLESS OTHERWISE SPECIFIED:
SCALE: 1:10 WEIGHT:
REVDWG. NO.
D
SIZE
TITLE:
NAME DATE
COMMENTS:
Q.A.
MFG APPR.
ENG APPR.
CHECKED
DRAWN
MATERIAL
INTERPRET GEOMETRIC
FINISH
Control Box, Hoist Lateral
DIMENSIONS ARE IN INCHES
TOLERANCES:
FRACTIONAL
ANGULAR: MACH BEND
TWO PLACE DECIMAL 0.01
THREE PLACE DECIMAL
NEXT ASSY
0.56 THRU
NOTES:
1. FRP BEAM BASED ON WIDE FLANGE BEAM BEDFORD REINFORCED PLASTICS PART
NUMBER WFB8X8X1/2GY22-401
2. APPROVED FOR PUBLIC RELEASE; DISTRIBUTION IS UNLMITED
3. QUANTITY TAKE OFF: 1
1.50 THRU
1 0
0.53 2.47
3.00
7.
3.
1.
2.00
4.00
6.00
.4
8.
9.
.5
6.00
5.
3.00
2.
6.
2.38
0.005
APPLICATION
USED ON
A A
B B
C C
D D
H-204
FRP
MATERIAL
INTERPRET GEOMETRIC Panel Shelf Long Outer Edge
DO NOT SCALE DRAWING
H-204
SHEET 1 OF 1
UNLESS OTHERWISE SPECIFIED:
SCALE: 1:5 WEIGHT:
REVDWG. NO.
D
SIZE
TITLE:
NAME DATE
COMMENTS:
Q.A.
MFG APPR.
ENG APPR.
CHECKED
DRAWN
Length 76", Hoist Control
TOLERANCING PER:
FINISH
DIMENSIONS ARE IN INCHES
TOLERANCES:
FRACTIONAL
ANGULAR: MACH BEND
TWO PLACE DECIMAL 0.01
THREE PLACE DECIMAL
NEXT ASSY
0.56 THRU
NOTES:
1. FRP BEAM SHALL BE I BEAM BEDFORD REINFORCED PLASTICS PART
NUMBER IB6X3X3/8GY22-401
2. APPROVED FOR PUBLIC RELEASE; DISTRIBUTION IS UNLMITED
3. QUANTITY TAKE OFF: 1
0.27 THRU
.0
.0
3.00
3.88
.5
.4
.3
4.
2.13
4.00
6.00 6.00
0.63
FRP
A A
B B
C C
D D
0.005 H-205
INTERPRET GEOMETRIC Panel Shelf Long, Ledge Side
DO NOT SCALE DRAWING SCALE: 1:5 SHEET 1 OF 1
USED ON
UNLESS OTHERWISE SPECIFIED:
WEIGHT:
REV
H-205D
SIZE
TITLE:
NAME DATE
COMMENTS:
Q.A.
MFG APPR.
ENG APPR.
CHECKED
DRAWN
FINISH
TOLERANCING PER:
Length 76", Hoist Control
MATERIAL DWG. NO.
DIMENSIONS ARE IN INCHES
TOLERANCES:
FRACTIONAL
ANGULAR: MACH BEND
TWO PLACE DECIMAL 0.01
THREE PLACE DECIMAL
NEXT ASSY
0.56 THRU
NOTES:
1. FRP BEAM SHALL BE I BEAM BEDFORD REINFORCED PLASTICS PART
NUMBER IB6X3X3/8GY22-401
2. APPROVED FOR PUBLIC RELEASE; DISTRIBUTION IS UNLMITED
3. QUANTITY TAKE OFF: 1
6.00 6.00
1.75
4.00
3.75
43.50
NOTES:
1. FRP BEAM SHALL BE I BEAM BEDFORD REINFORCED PLASTICS PART NUMBER
IB6X3X3/8GY22-401
2. APPROVED FOR PUBLIC RELEASE; DISTRIBUTION IS UNLMITED
3. QUANTITY TAKE OFF: 3
0.005
APPLICATION
USED ON
A A
B B
C C
D D
H-206
FRP
MATERIAL
INTERPRET GEOMETRIC Panel Legs
DO NOT SCALE DRAWING
H-206
SHEET 1 OF 1
UNLESS OTHERWISE SPECIFIED:
SCALE: 1:5 WEIGHT:
REVDWG. NO.
D
SIZE
TITLE:
NAME DATE
COMMENTS:
Q.A.
MFG APPR.
ENG APPR.
CHECKED
DRAWN
Length 43.125", Control
TOLERANCING PER:
FINISH
DIMENSIONS ARE IN INCHES
TOLERANCES:
FRACTIONAL
ANGULAR: MACH BEND
TWO PLACE DECIMAL 0.01
THREE PLACE DECIMAL
.5
0.38
2.13
3.88 4.00
5.63 6.00
0.005
UNLESS OTHERWISE SPECIFIED:
USED ON
A A
B B
C C
D D
H-207
FRP
APPLICATION
TOLERANCING PER:
Length 12.625", Machined, Short
H-207
REV
SHEET 1 OF 1SCALE: 1:2 WEIGHT: DO NOT SCALE DRAWING
DWG. NO.
D
SIZE
TITLE:
NAME DATE
COMMENTS:
Q.A.
MFG APPR.
ENG APPR.
CHECKED
DRAWN
MATERIAL
INTERPRET GEOMETRIC
FINISH
Hoist Control Panel Shelf, DIMENSIONS ARE IN INCHES
TOLERANCES:
FRACTIONAL
ANGULAR: MACH BEND
TWO PLACE DECIMAL 0.01
THREE PLACE DECIMAL
NEXT ASSY
NOTES:
1. FRP BEAM SHALL BE I BEAM BEDFORD REINFORCED PLASTICS PART NUMBER
IB6X3X3/8GY22-401
2. APPROVED FOR PUBLIC RELEASE; DISTRIBUTION IS UNLMITED
1.88
6.00
.4
.2
.0
.3
.3
.3
.9
.7
.5
.7
.0
2.47 3.00
.3
.3
.3
.3
.3
.0
.7
NOTES:
1. FRP BEAM SHALL BE I BEAM BEDFORD REINFORCED PLASTICS PART
NUMBER IB6X3X3/8GY22-401
2. APPROVED FOR PUBLIC RELEASE; DISTRIBUTION IS UNLMITED
3. QUANTITY TAKE OFF: 1
UNLESS OTHERWISE SPECIFIED:
A A
B B
C C
D D
USED ON
APPLICATION
Mount, I Beam, Left Side
DO NOT SCALE DRAWING
FRP
SHEET 1 OF 1
DWG. NO.
H-208
WEIGHT:
REV
SCALE: 1:20
D
SIZE
TITLE:
NAME DATE
COMMENTS:
Q.A.
MFG APPR.
ENG APPR.
CHECKED
DRAWN
FINISH
MATERIAL
H-208 Hoist, Pulley
TOLERANCING PER:
INTERPRET GEOMETRIC
0.005
DIMENSIONS ARE IN INCHES
TOLERANCES:
FRACTIONAL
ANGULAR: MACH BEND
TWO PLACE DECIMAL 0.01
THREE PLACE DECIMAL
NEXT ASSY
0.56 THRU0.40 THRU
0.81 THRU
6.00
.4
.2
.0
.3
.3
.3
.9
.7
.7
.5
.0
2.38 2.47 3.00
.3
.3
.3
.3
.3
.0
.7
0.40 THRU
0.56 THRU
0.81 THRU
SHEET 1 OF 1
USED ON
A A
B B
C C
D D
DO NOT SCALE DRAWING
0.005
H-209
INTERPRET GEOMETRIC Beam Right Side
APPLICATION
H-209
REV
SCALE: 1:20 WEIGHT:
UNLESS OTHERWISE SPECIFIED:
DWG. NO.
D
SIZE
TITLE:
NAME DATE
COMMENTS:
Q.A.
MFG APPR.
ENG APPR.
CHECKED
DRAWN
FINISH
TOLERANCING PER:
Length 185.75", Hoist Lift
MATERIAL
FRP
DIMENSIONS ARE IN INCHES
TOLERANCES:
FRACTIONAL
ANGULAR: MACH BEND
TWO PLACE DECIMAL 0.01
THREE PLACE DECIMAL
NEXT ASSY
NOTES:
1. FRP BEAM SHALL BE I BEAM BEDFORD REINFORCED PLASTICS PART
NUMBER IB6X3X3/8GY22-401
2. APPROVED FOR PUBLIC RELEASE; DISTRIBUTION IS UNLMITED
40.77
1.25 2.75
.1
40°
43.40 41.87
47.93
.8
.1
.1
3 0
0°
0.56 THRU
0.56 THRU
0.005
APPLICATION
USED ON
A A
B B
C C
D D
H-210
FRP
MATERIAL
INTERPRET GEOMETRIC Support
DO NOT SCALE DRAWING
H-210
SHEET 1 OF 1
UNLESS OTHERWISE SPECIFIED:
SCALE: 1:5 WEIGHT:
REVDWG. NO.
D
SIZE
TITLE:
NAME DATE
COMMENTS:
Q.A.
MFG APPR.
ENG APPR.
CHECKED
DRAWN
Length 48", Short Stair
TOLERANCING PER:
FINISH
DIMENSIONS ARE IN INCHES
TOLERANCES:
FRACTIONAL
ANGULAR: MACH BEND
TWO PLACE DECIMAL 0.01
THREE PLACE DECIMAL
NEXT ASSY
NOTES:
1. FRP BEAM SHALL BE I BEAM BEDFORD REINFORCED PLASTICS PART
NUMBER
IB6X3X3/8GY22-401
3. QUANTITY TAKE OFF: 2
1.25 2.75
82.85 83.94 85.47
90.00
.8
.8
.1
8 0
40°
3.00
0.005
APPLICATION
USED ON
A A
B B
C C
D D
H-211
FRP
MATERIAL
INTERPRET GEOMETRIC Support
DO NOT SCALE DRAWING
H-211
SHEET 1 OF 1
UNLESS OTHERWISE SPECIFIED:
SCALE: 1:10 WEIGHT:
REVDWG. NO.
D
SIZE
TITLE:
NAME DATE
COMMENTS:
Q.A.
MFG APPR.
ENG APPR.
CHECKED
DRAWN
Length 90", Tall Stair
TOLERANCING PER:
FINISH
DIMENSIONS ARE IN INCHES
TOLERANCES:
FRACTIONAL
ANGULAR: MACH BEND
TWO PLACE DECIMAL 0.10
THREE PLACE DECIMAL
NEXT ASSY
0.56 THRU
0.56 THRU
NOTES:
1. FRP BEAM SHALL BE I BEAM BEDFORD REINFORCED PLASTICS PART
NUMBER
IB6X3X3/8GY22-401
140°
50°
.6
0°
0°
40°
2.64 3.42 3.61 3.78 4.18 5.14 5.69 6.35 6.48 6.48 7.04 7.08
8.26 9.13 9.16
11.50
.2
.8
.9
.0
.6
.2 4 0
0.
.5
.3
.5
.1
.3
.8
.8
.0
.6
.9
.4
.8
.3
.9
.5
.1
.8
.0
.2
130°
0.50
3.00
.6
.5
.5
.2
7.95 11.50
.8
.2
5.14
11.50
NOTES:
1. FRP CHANNEL SHALL BE CHANNEL BEDFORD REINFORCED PLASTICS
PART NUMBER CH12X3X1/2GY22‐401
2. APPROVED FOR PUBLIC RELEASE; DISTRIBUTION IS UNLMITED
3. QUANTITY TAKE OFF: 1
0.56
0.005
DO NOT SCALE DRAWING
USED ON
A A
B B
C C
D D
INTERPRET GEOMETRIC
H-212 HOIST,
TOLERANCING PER:
Stairs, Right Side
UNLESS OTHERWISE SPECIFIED:
H-212
REV
SHEET 1 OF 1SCALE: 1:20 WEIGHT: APPLICATION
DWG. NO.
D
SIZE
TITLE:
NAME DATE
COMMENTS:
Q.A.
MFG APPR.
ENG APPR.
CHECKED
DRAWN
FRP
FINISH
MATERIAL
DIMENSIONS ARE IN INCHES
TOLERANCES:
FRACTIONAL
ANGULAR: MACH BEND
TWO PLACE DECIMAL 0.01
THREE PLACE DECIMAL
0.56
.7
3.00
40°
40°
0°
0°
.2
.8
.8
.9
.0
.6
.2
.3
.8
.5
.3
.5
.1
.3
.8
.8
.0
.6
.8
.3
.8
.3
.9
.5
.1
.8
.0
.6
.2
2.64 3.42 3.61 3.78 4.18 5.14 5.69 6.35 6.48 7.05 7.07 8.26 9.14
11.50 50.36°
7.95
11.50
5.14
11.50
2.50
.6
.5
.1
.5
.2
0.53
3.00
APPLICATION
USED ON
A A
B B
C C
D D
0.005
H-213
INTERPRET GEOMETRIC Hoist Stairs Left Side
DO NOT SCALE DRAWING
H-213
SHEET 1 OF 1
UNLESS OTHERWISE SPECIFIED:
SCALE: 1:20 WEIGHT:
REVDWG. NO.
D
SIZE
TITLE:
NAME DATE
COMMENTS:
Q.A.
MFG APPR.
ENG APPR.
CHECKED
DRAWN
FINISH
TOLERANCING PER:
Length 167", Machined, MATERIAL
FRP
DIMENSIONS ARE IN INCHES
TOLERANCES:
FRACTIONAL
ANGULAR: MACH BEND
TWO PLACE DECIMAL 0.01
THREE PLACE DECIMAL
NEXT ASSY
0.56 THRU
NOTES:
1. FRP BEAM SHALL BE WIDE FLANGE BEAM BEADFORD REINFORCED POLIMER PART
NUMBER WFB8X8X1/2GY22‐401
2. APPROVED FOR PUBLIC RELEASE; DISTRIBUTION IS UNLMITED
30.00
1.63
NOTES:
1. FRP GRATING SHALL BE BEDFORD REINFORCED PLASTICS STEP WITH GRIT ON TOP
2. APPROVED FOR PUBLIC RELEASE; DISTRIBUTION IS UNLMITED
3. QUANTITY TAKE OFF: 12
APPLICATION
DWG. NO.
A A
B B
C C
D D
0.005
H-214
INTERPRET GEOMETRIC x 30"
DO NOT SCALE DRAWING SCALE: 1:5 SHEET 1 OF 1
FRP H-214
WEIGHT:
REV
UNLESS OTHERWISE SPECIFIED:
D
SIZE
TITLE:
NAME DATE
COMMENTS:
Q.A.
MFG APPR.
ENG APPR.
CHECKED
DRAWN
FINISH
TOLERANCING PER:
HOIST, Stairs, Step, Length
MATERIAL
USED ON
DIMENSIONS ARE IN INCHES
TOLERANCES:
FRACTIONAL
ANGULAR: MACH BEND
TWO PLACE DECIMAL 0.01
THREE PLACE DECIMAL
TEXTURE THIS FACE
2.13
29.50
47.88
.1
.9
27.75
49.13
29.00
.0
1.50
4.75
48.38 49.13
NOTES:
1. FRP BEAM SHALL BE BEDFORD 2‐1/8 X 2‐1/8 READYRAIL POST
2. APPROVED FOR PUBLIC RELEASE; DISTRIBUTION IS UNLMITED
3. QUANTITY TAKE OFF: 19
0.56 THRU
0.19 THRU
APPLICATION
DWG. NO.
A A
B B
C C
D D
0.005
H-215 INTERPRET GEOMETRIC HOIST, Vertical Railing
DO NOT SCALE DRAWING
USED ON
SHEET 1 OF 1SCALE: 1:5
FRP
WEIGHT:
REV
UNLESS OTHERWISE SPECIFIED:
D
SIZE
TITLE:
NAME DATE
COMMENTS:
Q.A.
MFG APPR.
ENG APPR.
CHECKED
DRAWN
FINISH
TOLERANCING PER:
Length 49", POST
MATERIAL
H-215
DIMENSIONS ARE IN INCHES
TOLERANCES:
FRACTIONAL
ANGULAR: MACH BEND
TWO PLACE DECIMAL 0.01
APPLICATION SCALE: 1:1
A A
B B
C C
D D
TOLERANCING PER:
INTERPRET GEOMETRIC Spacers
DO NOT SCALE DRAWING
USED ON
SHEET 1 OF 1
H-216
DWG. NO.
WEIGHT:
REV
UNLESS OTHERWISE SPECIFIED:
D
SIZE
TITLE:
NAME DATE
COMMENTS:
Q.A.
MFG APPR.
ENG APPR.
CHECKED
DRAWN
FINISH
H-216 Post Hoist, Step Down Stairs, Rails, Square
MATERIAL
DIMENSIONS ARE IN INCHES
TOLERANCES:
FRACTIONAL
ANGULAR: MACH BEND
TWO PLACE DECIMAL
THREE PLACE DECIMAL
NEXT ASSY
NOTES:
1. SHALL BE BEDFORD 2‐1/8" X 2‐1/8" READYRAIL POST
3. QUANTITY TAKE OFF: 16
45°
0.005
APPLICATION
USED ON
A A
B B
C C
D D
H-217
FRP
MATERIAL
INTERPRET GEOMETRIC Platform, Toe Kick
DO NOT SCALE DRAWING
H-217
SHEET 1 OF 1
UNLESS OTHERWISE SPECIFIED:
SCALE: 1:5 WEIGHT:
REVDWG. NO.
D
SIZE
TITLE:
NAME DATE
COMMENTS:
Q.A.
MFG APPR.
ENG APPR.
CHECKED
DRAWN
Length 87.5", POST, TOLERANCING PER:
FINISH
DIMENSIONS ARE IN INCHES
TOLERANCES:
FRACTIONAL
ANGULAR: MACH BEND
TWO PLACE DECIMAL 0.01
THREE PLACE DECIMAL
NEXT ASSY
NOTES:
1. FRP TOE PLATE SHALL BE TOE PLATE BEDFORD REINFORCED
PLASTICS PART NUMBER TOE4X5/8X1/8XYE22‐401
2. APPROVED FOR PUBLIC RELEASE; DISTRIBUTION IS UNLMITED
0.19 THRU
45°
45°
0°
1.75
.7
.2
16.25
50.81
84.75
101.00
NOTES:
1. FRP SQUARE TUBE SHALL BE SQUARE TUBE BEDFORD REINFORCED
PLASTICS PART NUMBER SQTB1_3/4X1_3/4/YE22‐401
2. APPROVED FOR PUBLIC RELEASE; DISTRIBUTION IS UNLMITED
3. QUANTITY TAKE OFF: 1
0.005
APPLICATION
USED ON
A A
B B
C C
D D
H-218
FRP
MATERIAL
INTERPRET GEOMETRIC Platform, Railing
DO NOT SCALE DRAWING
H-218
SHEET 1 OF 1
UNLESS OTHERWISE SPECIFIED:
SCALE: 1:10 WEIGHT:
REVDWG. NO.
D
SIZE
TITLE:
NAME DATE
COMMENTS:
Q.A.
MFG APPR.
ENG APPR.
CHECKED
DRAWN
Length 94", HOIST, TOLERANCING PER:
FINISH
DIMENSIONS ARE IN INCHES
TOLERANCES:
FRACTIONAL
ANGULAR: MACH BEND
TWO PLACE DECIMAL 0.01
THREE PLACE DECIMAL
NEXT ASSY
0.19 THRU
1.75 0.88
1.75
0.88
APPLICATION
H-219
A A
B B
C C
D D
0.005
H-219
INTERPRET GEOMETRIC Platform, Railing
DO NOT SCALE DRAWING
DWG. NO.
SHEET 1 OF 1SCALE: 1:5
FRP
WEIGHT:
REV
UNLESS OTHERWISE SPECIFIED:
D
SIZE
TITLE:
NAME DATE
COMMENTS:
Q.A.
MFG APPR.
ENG APPR.
CHECKED
DRAWN
FINISH
TOLERANCING PER:
Length 71.375", HOIST, MATERIAL
USED ON
DIMENSIONS ARE IN INCHES
TOLERANCES:
FRACTIONAL
ANGULAR: MACH BEND
TWO PLACE DECIMAL 0.01
THREE PLACE DECIMAL
NEXT ASSY
NOTES:
1. FRP SQUARE TUBE SHALL BE SQUARE TUBE BEDFORD REINFORCED
PLASTICS PART NUMBER SQTB1_3/4X1_3/4/YE22‐401
34.50
45°
50.56
.8
.7
16.25
.7
16.25
34.50
49.13 50.56
.5
.8
.7
NOTES:
1. FRP SQUARE TUBE SHALL BE SQUARE TUBE BEDFORD REINFORCED
PLASTICS PART NUMBER SQTB1_3/4X1_3/4/YE22‐401
2. APPROVED FOR PUBLIC RELEASE; DISTRIBUTION IS UNLMITED
3. QUANTITY TAKE OFF: 1
DWG. NO.
A A
B B
C C
D D
USED ON
APPLICATION
0.005
Platform, Railing
DO NOT SCALE DRAWING
FRP
SHEET 1 OF 1SCALE: 1:5
H-220
WEIGHT:
REV
UNLESS OTHERWISE SPECIFIED:
D
SIZE
TITLE:
NAME DATE
COMMENTS:
Q.A.
MFG APPR.
ENG APPR.
CHECKED
DRAWN
FINISH
MATERIAL
Length 44.375", HOIST, TOLERANCING PER:
INTERPRET GEOMETRIC
H-220
DIMENSIONS ARE IN INCHES
TOLERANCES:
FRACTIONAL
ANGULAR: MACH BEND
TWO PLACE DECIMAL 0.01
THREE PLACE DECIMAL
NEXT ASSY
0.75 THRU
0.75 THRU0.19 THRU
.7
16.06
34.31
50.56
.8
.7
45°
1.44
16.06
34.31
50.56
.5
.8
.7
SCALE: 1:5
A A
B B
C C
D D
H-221
APPLICATION
0.005
Platform, Railing
DO NOT SCALE DRAWING
USED ON
SHEET 1 OF 1
FRP DWG. NO.
WEIGHT:
REV
UNLESS OTHERWISE SPECIFIED:
D
SIZE
TITLE:
NAME DATE
COMMENTS:
Q.A.
MFG APPR.
ENG APPR.
CHECKED
DRAWN
FINISH
MATERIAL
Length 44.375", HOIST, TOLERANCING PER:
INTERPRET GEOMETRIC
H-221
DIMENSIONS ARE IN INCHES
TOLERANCES:
FRACTIONAL
ANGULAR: MACH BEND
TWO PLACE DECIMAL 0.01
THREE PLACE DECIMAL
NEXT ASSY
0.75 THRU
0.75 THRU
0.19 THRU
0.56 THRU
0.19 THRU
NOTES:
1. FRP SQUARE TUBE SHALL BE SQUARE TUBE BEDFORD REINFORCED
PLASTICS PART NUMBER SQTB1_3/4X1_3/4/YE22-401
13.75
23.13
36.88
.5
.7
0°
35.13
36.88
.8
.7
45°
23.13
1.75
NOTES:
1. FRP SQUARE TUBE SHALL BE SQUARE TUBE BEDFORD REINFORCED
PLASTICS PART NUMBER SQTB1_3/4X1_3/4/YE22-401
2. APPROVED FOR PUBLIC RELEASE; DISTRIBUTION IS UNLMITED
3. QUANTITY TAKE OFF: 1
0.75 THRU
0.75 THRU
0.19 THRU
0.19 THRU
DWG. NO.
A A
B B
C C
D D
USED ON
APPLICATION
0.005
Platform, Railing
DO NOT SCALE DRAWING
FRP
SHEET 1 OF 1
H-222
UNLESS OTHERWISE SPECIFIED:
WEIGHT:
REV
SCALE: 1:5
D
SIZE
TITLE:
NAME DATE
COMMENTS:
Q.A.
MFG APPR.
ENG APPR.
CHECKED
DRAWN
FINISH
MATERIAL
Length 30.5", HOIST, TOLERANCING PER:
INTERPRET GEOMETRIC
H-222
DIMENSIONS ARE IN INCHES
TOLERANCES:
FRACTIONAL
ANGULAR: MACH BEND
TWO PLACE DECIMAL 0.01
0° 45°
16.25
43.63
53.60
45°
.2
1.75
16.25
43.63
51.85 52.37 53.60
NOTES:
1. FRP SQUARE TUBE SHALL BE SQUARE TUBE BEDFORD REINFORCED
PLASTICS PART NUMBER SQTB1_3/4X1_3/4/YE22-401
2. APPROVED FOR PUBLIC RELEASE; DISTRIBUTION IS UNLMITED
3. QUANTITY TAKE OFF: 1
0.005
APPLICATION
USED ON
A A
B B
C C
D D
H-223
FRP
MATERIAL
INTERPRET GEOMETRIC Horizontal Rail, x55.25
DO NOT SCALE DRAWING
H-223
SHEET 1 OF 1
UNLESS OTHERWISE SPECIFIED:
SCALE: 1:5 WEIGHT:
REVDWG. NO.
D
SIZE
TITLE:
NAME DATE
COMMENTS:
Q.A.
MFG APPR.
ENG APPR.
CHECKED
DRAWN
Hoist, Platform, Rails, TOLERANCING PER:
FINISH
DIMENSIONS ARE IN INCHES
TOLERANCES:
FRACTIONAL
ANGULAR: MACH BEND
TWO PLACE DECIMAL 0.01
THREE PLACE DECIMAL
NEXT ASSY
0.75 THRU
0.75 THRU
0.19 THRU
2.00
0.19 THRU
NOTES:
1. FRP TOE PLATE SHALL BE TOE PLATE BEDFORD REINFORCED
PLASTICS PART NUMBER TOE4X5/8X1/8XYE22‐401
2. APPROVED FOR PUBLIC RELEASE; DISTRIBUTION IS UNLMITED
3. QUANTITY TAKE OFF: 1
0.005
APPLICATION
USED ON
A A
B B
C C
D D
H-224
FRP
MATERIAL
INTERPRET GEOMETRIC Plate x55.25
DO NOT SCALE DRAWING
H-224
SHEET 1 OF 1
UNLESS OTHERWISE SPECIFIED:
SCALE: 1:5 WEIGHT:
REVDWG. NO.
D
SIZE
TITLE:
NAME DATE
COMMENTS:
Q.A.
MFG APPR.
ENG APPR.
CHECKED
DRAWN
Post Hoist, Platform, Toe
TOLERANCING PER:
FINISH
DIMENSIONS ARE IN INCHES
TOLERANCES:
FRACTIONAL
ANGULAR: MACH BEND
TWO PLACE DECIMAL 0.01
18.38
.7
19.88
21.88
.1
3.50
.6
2.75
19.13
21.88
.7
.5
1.23
20.13 20.65
21.88
.8
.7
0°
DWG. NO.
A A
B B
C C
D D
USED ON
APPLICATION
0.005
Platform, Vertical Railing End
DO NOT SCALE DRAWING
FRP
SHEET 1 OF 1
H-225
UNLESS OTHERWISE SPECIFIED:
WEIGHT:
REV
SCALE: 1:2
D
SIZE
TITLE:
NAME DATE
COMMENTS:
Q.A.
MFG APPR.
ENG APPR.
CHECKED
DRAWN
FINISH
MATERIAL
Length 21.875", POST HOIST, TOLERANCING PER:
INTERPRET GEOMETRIC
H-225
DIMENSIONS ARE IN INCHES
TOLERANCES:
FRACTIONAL
ANGULAR: MACH BEND
TWO PLACE DECIMAL 0.01
THREE PLACE DECIMAL
NEXT ASSY
0.19 THRU
NOTES:
1. FRP SQUARE TUBE SHALL BE SQUARE TUBE BEDFORD REINFORCED
PLASTICS PART NUMBER SQTB1_3/4X1_3/4/YE22-401
2. APPROVED FOR PUBLIC RELEASE; DISTRIBUTION IS UNLMITED
0° 40°
42.62
21.33
24.13
40.08
44.96
26.67
42.62
.1
.9
23.87
44.96 44.84
.1
0°
.0
1.50
3.13
4.75
24.00
42.75
APPLICATION SCALE: 1:5
A A
B B
C C
D D
0.005 H-226
INTERPRET GEOMETRIC Main Stairs, Vertical Railing
DO NOT SCALE DRAWING
DWG. NO.
SHEET 1 OF 1
H-226
UNLESS OTHERWISE SPECIFIED:
WEIGHT:
REVFRP D
SIZE
TITLE:
NAME DATE
COMMENTS:
Q.A.
MFG APPR.
ENG APPR.
CHECKED
DRAWN
FINISH
TOLERANCING PER:
Length 45.625", POST HOIST, MATERIAL
USED ON
DIMENSIONS ARE IN INCHES
TOLERANCES:
FRACTIONAL
ANGULAR: MACH BEND
TWO PLACE DECIMAL 0.01
THREE PLACE DECIMAL
NEXT ASSY
NOTES:
SHALL BE BEDFORD READYRAIL POST 2-1/8 X 2-1/81.
APPROVED FOR PUBLIC RELEASE; DISTRIBUTION IS UNLMITED2.
QUANTITY TAKE OFF: 83.
SECTION A-A
A
A
0.56 THRU
0.25 THRU
0.19 THRU
2.63
SCALE: 2:1
INTERPRET GEOMETRIC
0.005
APPLICATION
DWG. NO.
A A
B B
C C
D D
MATERIAL
FINISH
USED ON
TOLERANCING PER:
DO NOT SCALE DRAWING
H-227 Post Hoist, Stairs, FRP
SHEET 1 OF 1
Rails, Square Spacers
H-227
WEIGHT:
REV
UNLESS OTHERWISE SPECIFIED:
D
SIZE
TITLE:
NAME DATE
COMMENTS:
Q.A.
MFG APPR.
ENG APPR.
CHECKED
DRAWNDIMENSIONS ARE IN INCHES
TOLERANCES:
FRACTIONAL
ANGULAR: MACH BEND
TWO PLACE DECIMAL 0.01
THREE PLACE DECIMAL
NEXT ASSY
NOTES:
1. SHALL BE BEDFORD READYRAIL POST
3. QUANTITY TAKE OFF: 40
0.58 0.64
70°
18.37
21.50
16.69
.7
20°
.8
.7
DWG. NO.
A A
B B
C C
D D
USED ON
APPLICATION
0.005
Main Stairs, Vertical Rail End
DO NOT SCALE DRAWING SCALE: 1:2 SHEET 1 OF 1
H-228FRP
WEIGHT:
REV
UNLESS OTHERWISE SPECIFIED:
D
SIZE
TITLE:
NAME DATE
COMMENTS:
Q.A.
MFG APPR.
ENG APPR.
CHECKED
DRAWN
FINISH
MATERIAL
Length 21.5", POST HOIST, TOLERANCING PER:
INTERPRET GEOMETRIC
H-228
DIMENSIONS ARE IN INCHES
TOLERANCES:
FRACTIONAL
ANGULAR: MACH BEND
TWO PLACE DECIMAL 0.01
THREE PLACE DECIMAL
NEXT ASSY
NOTES:
1. FRP SQUARE TUBE SHALL BE SQUARE TUBE BEDFORD REINFORCED
PLASTICS PART NUMBER SQTB1_3/4X1_3/4/YE22-401
2. APPROVED FOR PUBLIC RELEASE; DISTRIBUTION IS UNLMITED
.7
0.58 0.64
16.17
63.03
110.36
157.23
170.69 172.37 175.50
.8
.7
0°
0°
20°
H-229
A A
B B
C C
D D
DWG. NO.
APPLICATION
0.005
Stairs, Railing
DO NOT SCALE DRAWING
FRP
SHEET 1 OF 1
USED ON
UNLESS OTHERWISE SPECIFIED:
WEIGHT:
REV
SCALE: 1:20
D
SIZE
TITLE:
NAME DATE
COMMENTS:
Q.A.
MFG APPR.
ENG APPR.
CHECKED
DRAWN
FINISH
MATERIAL
Length 148", HOIST, Main
TOLERANCING PER:
INTERPRET GEOMETRIC
H-229
DIMENSIONS ARE IN INCHES
TOLERANCES:
FRACTIONAL
ANGULAR: MACH BEND
TWO PLACE DECIMAL 0.01
THREE PLACE DECIMAL
NEXT ASSY
NOTES:
1. FRP SQUARE TUBE SHALL BE SQUARE TUBE BEDFORD REINFORCED
PLASTICS PART NUMBER SQTB1_3/4X1_3/4/YE22-401
2. APPROVED FOR PUBLIC RELEASE; DISTRIBUTION IS UNLMITED
3. QUANTITY TAKE OFF: 2
0.19 THRU
0.19 THRU
0.19 THRU
35.88
35.88
2.13
33.75
45° 0°
0°
45°
2.13
0.005
APPLICATION
USED ON
A A
B B
C C
D D
H-230
FRP
TOLERANCING PER:
Length 17.875", HOIST, Fall
Rail
DO NOT SCALE DRAWING
H-230
SHEET 1 OF 1
UNLESS OTHERWISE SPECIFIED:
SCALE: 1:5 WEIGHT:
REVDWG. NO.
D
SIZE
TITLE:
NAME DATE
COMMENTS:
Q.A.
MFG APPR.
ENG APPR.
CHECKED
DRAWN
MATERIAL
INTERPRET GEOMETRIC
FINISH
Protection Gate, Horizontal
DIMENSIONS ARE IN INCHES
TOLERANCES:
FRACTIONAL
ANGULAR: MACH BEND
TWO PLACE DECIMAL 0.01
THREE PLACE DECIMAL
NEXT ASSY
NOTES:
SHALL USE BEDFORD READYRAIL POST 2 1/8 X 2 1/81.
APPROVED FOR PUBLIC RELEASE; DISTRIBUTION IS UNLMITED2.
QUANTITY TAKE OFF: 23.
0.75
34.50 35.25
35.25
35.25
1.75
0.19 THRU
0.19 THRU
1. FRP SQUARE TUBE, SHALL USE SQUARE TUBE BEDFORD REINFORCED
PLASTICS PART NUMBER SQTB1_3/4X1_3/4/YE22-401
2. APPROVED FOR PUBLIC RELEASE; DISTRIBUTION IS UNLMITED
3. QUANTITY TAKE OFF: 1
0.005
APPLICATION
USED ON
A A
B B
C C
D D
H-231
FRP
TOLERANCING PER:
Length 17.875", HOIST, Fall
Rail
DO NOT SCALE DRAWING
H-231
SHEET 1 OF 1
UNLESS OTHERWISE SPECIFIED:
SCALE: 1:5 WEIGHT:
REVDWG. NO.
D
SIZE
TITLE:
NAME DATE
COMMENTS:
Q.A.
MFG APPR.
ENG APPR.
CHECKED
DRAWN
MATERIAL
INTERPRET GEOMETRIC
FINISH
Protection Gate, Horizontal
DIMENSIONS ARE IN INCHES
TOLERANCES:
FRACTIONAL
ANGULAR: MACH BEND
TWO PLACE DECIMAL 0.01
25.25
0.75
24.50 25.25
.0
1.75
25.25
0.19 THRU
0.19 THRU
NOTE
1. FRP SQUARE TUBE, SHALL USE SQUARE TUBE BEDFORD REINFORCED
PLASTICS PART NUMBER SQTB1_3/4X1_3/4/YE22-401
2. APPROVED FOR PUBLIC RELEASE; DISTRIBUTION IS UNLMITED
3. QUANTITY TAKE OFF: 1
0.005
APPLICATION
USED ON
A A
B B
C C
D D
H- 232
FRP
TOLERANCING PER:
Length 17.875", HOIST, Fall
Rail
DO NOT SCALE DRAWING
H-232
SHEET 1 OF 1
UNLESS OTHERWISE SPECIFIED:
SCALE: 1:5 WEIGHT:
REVDWG. NO.
D
SIZE
TITLE:
NAME DATE
COMMENTS:
Q.A.
MFG APPR.
ENG APPR.
CHECKED
DRAWN
MATERIAL
INTERPRET GEOMETRIC
FINISH
Protection Gate, Horizontal
DIMENSIONS ARE IN INCHES
TOLERANCES:
FRACTIONAL
ANGULAR: MACH BEND
TWO PLACE DECIMAL 0.01
1.75 4.25
87.01
114.00 115.75
.0
.0
.3
19.06
29.20
111.25
115.75
.6
.0
0.56 THRU
0.56 THRU
NOTES:
1. FRP BEAM SHALL BE WIDE FLANGE BEAM BEDFORD REINFORCED
PLASTICS PART NUMBER WFB8X8X1/2GY22-401
2. APPROVED FOR PUBLIC RELEASE; DISTRIBUTION IS UNLMITED
3. QUANTITY TAKE OFF: 1
0.005
APPLICATION
USED ON
A A
B B
C C
D D
H-233
FRP
MATERIAL
INTERPRET GEOMETRIC Column Center Right
DO NOT SCALE DRAWING
H-233
SHEET 1 OF 1
UNLESS OTHERWISE SPECIFIED:
SCALE: 1:20 WEIGHT:
REVDWG. NO.
D
SIZE
TITLE:
NAME DATE
COMMENTS:
Q.A.
MFG APPR.
ENG APPR.
CHECKED
DRAWN
Length 116", HOIST
TOLERANCING PER:
FINISH
DIMENSIONS ARE IN INCHES
TOLERANCES:
FRACTIONAL
ANGULAR: MACH BEND
TWO PLACE DECIMAL 0.01
THREE PLACE DECIMAL
NEXT ASSY
19.06
29.20
111.25
115.75
.6
.0
.0
1.75 4.25
87.01
114.00 115.75
.0
.0
0.56 THRU
0.27 THRU
NOTES:
1. FRP BEAM BASED ON WIDE FLANGE BEAM BEDFORD REINFORCED
PLASTICS PART NUMBER WFB8X8X1/2GY22-401
2. APPROVED FOR PUBLIC RELEASE; DISTRIBUTION IS UNLMITED
3. QUANTITY TAKE OFF: 1
APPLICATION
USED ON
A A
B B
C C
D D
TOLERANCING PER:
Length 116", HOIST
MATERIAL
INTERPRET GEOMETRIC Column Center Left
DO NOT SCALE DRAWING
H-234
SHEET 1 OF 1
UNLESS OTHERWISE SPECIFIED:
SCALE: 1:20 WEIGHT:
REVDWG. NO.
D
SIZE
TITLE:
NAME DATE
COMMENTS:
Q.A.
MFG APPR.
ENG APPR.
CHECKED
DRAWN
H-234
FINISH
DIMENSIONS ARE IN INCHES
TOLERANCES:
FRACTIONAL
ANGULAR: MACH BEND
TWO PLACE DECIMAL
THREE PLACE DECIMAL
NEXT ASSY
4.50
87.13
115.75
9 0
.0
94.54
1.75
98.54
111.50 114.00 115.75
.0
.3
4.50
87.86
.6
94.92
.0
.9
115.75
NOTES:
1. FRP BEAM BASED ON WIDE FLANGE BEAM BEDFORD REINFORCED
PLASTICS PART NUMBER WFB8X8X1/2GY22-401
2. APPROVED FOR PUBLIC RELEASE; DISTRIBUTION IS UNLMITED
3. QUANTITY TAKE OFF: 1
0.27 THRU
0.27 THRU
0.005
APPLICATION
USED ON
A A
B B
C C
D D
H-235
FRP
MATERIAL
INTERPRET GEOMETRIC Front Middle Right
DO NOT SCALE DRAWING
H-235
SHEET 1 OF 1
UNLESS OTHERWISE SPECIFIED:
SCALE: 1:20 WEIGHT:
REVDWG. NO.
D
SIZE
TITLE:
NAME DATE
COMMENTS:
Q.A.
MFG APPR.
ENG APPR.
CHECKED
DRAWN
Length 116", HOIST Column
TOLERANCING PER:
FINISH
DIMENSIONS ARE IN INCHES
TOLERANCES:
FRACTIONAL
ANGULAR: MACH BEND
TWO PLACE DECIMAL 0.01
THREE PLACE DECIMAL
NEXT ASSY
0.56 THRU
0.56 THRU
0.56 THRU
19.06
28.16
111.25
115.75
.6
.0
8.00
.0
1.75 4.25
15.75 17.75
87.01
114.00 115.75
.9
.0
.0
0.005
APPLICATION
USED ON
A A
B B
C C
D D
H-236
FRP
MATERIAL
INTERPRET GEOMETRIC Column Rear Right
DO NOT SCALE DRAWING
H-236
SHEET 1 OF 1
UNLESS OTHERWISE SPECIFIED:
SCALE: 1:20 WEIGHT:
REVDWG. NO.
D
SIZE
TITLE:
NAME DATE
COMMENTS:
Q.A.
MFG APPR.
ENG APPR.
CHECKED
DRAWN
Length 116", HOIST
TOLERANCING PER:
FINISH
DIMENSIONS ARE IN INCHES
TOLERANCES:
FRACTIONAL
ANGULAR: MACH BEND
TWO PLACE DECIMAL 0.01
THREE PLACE DECIMAL
NEXT ASSY
0.56 THRU
0.27 THRU
0.27 THRU
NOTES:
1. FRP BEAM BASED ON WIDE FLANGE BEAM BEDFORD REINFORCED
PLASTICS PART NUMBER WFB8X8X1/2GY22-401
2. APPROVED FOR PUBLIC RELEASE; DISTRIBUTION IS UNLMITED
3. QUANTITY TAKE OFF: 1
0.56 THRU
0.56 THRU
94.54
1.75
98.54
111.50 114.00 115.75
.0
8.00
4.50
87.86
115.75
9 0
.0
.3
4.00
87.13
94.92
115.75
.6
.0
0.56 THRU
NOTES:
1. FRP BEAM SHALL BE WIDE FLANGE BEAM BEDFORD REINFORCED
PLASTICS PART NUMBER WFB8X8X1/2GY22-401
2. APPROVED FOR PUBLIC RELEASE; DISTRIBUTION IS UNLMITED
3. QUANTITY TAKE OFF: 1
0.005
APPLICATION
USED ON
A A
B B
C C
D D
H-237
FRP
MATERIAL
INTERPRET GEOMETRIC Column Front Middle Left
DO NOT SCALE DRAWING
H-237
SHEET 1 OF 1
UNLESS OTHERWISE SPECIFIED:
SCALE: 1:20 WEIGHT:
REVDWG. NO.
D
SIZE
TITLE:
NAME DATE
COMMENTS:
Q.A.
MFG APPR.
ENG APPR.
CHECKED
DRAWN
Length 116", HOIST
TOLERANCING PER:
FINISH
DIMENSIONS ARE IN INCHES
TOLERANCES:
FRACTIONAL
ANGULAR: MACH BEND
TWO PLACE DECIMAL 0.01
THREE PLACE DECIMAL
NEXT ASSY
0.27 THRU
1.75
21.21
4.25
87.01
114.00 115.75
.0
.0
.9
19.06
28.16
87.01
111.25
115.75
.6
6 0
28.39
.0
.3
115.75
8.00
0.56 THRU
0.56 THRU
0.27 THRU
0.56 THRU
0.27 THRU
NOTES:
1. FRP BEAM BASED ON WIDE FLANGE BEAM BEDFORD REINFORCED
PLASTICS PART NUMBER WFB8X8X1/2GY22-401
2. APPROVED FOR PUBLIC RELEASE; DISTRIBUTION IS UNLMITED
3. QUANTITY TAKE OFF: 1
0.005
APPLICATION
USED ON
A A
B B
C C
D D
INTERPRET GEOMETRIC
H-238 Length 116", HOIST
TOLERANCING PER:
Column Front Left
DO NOT SCALE DRAWING
H-238
SHEET 1 OF 1
UNLESS OTHERWISE SPECIFIED:
SCALE: 1:20 WEIGHT:
REVDWG. NO.
D
SIZE
TITLE:
NAME DATE
COMMENTS:
Q.A.
MFG APPR.
ENG APPR.
CHECKED
DRAWN
FRP
FINISH
MATERIAL
DIMENSIONS ARE IN INCHES
TOLERANCES:
FRACTIONAL
ANGULAR: MACH BEND
TWO PLACE DECIMAL 0.01
THREE PLACE DECIMAL
.6
.0
87.01
.0
.0
.9
.0
.0
1.75 4.25
15.75 17.75
114.00 115.75
NOTES:
1. FRP BEAM BASED ON WIDE FLANGE BEAM BEDFORD REINFORCED
PLASTICS PART NUMBER WFB8X8X1/2GY22-401
2. APPROVED FOR PUBLIC RELEASE; DISTRIBUTION IS UNLMITED
3. QUANTITY TAKE OFF: 1
APPLICATION
USED ON
A A
B B
C C
D D
TOLERANCING PER:
MATERIAL
INTERPRET GEOMETRIC
Column Rear Left
DO NOT SCALE DRAWING
H-239
SHEET 1 OF 1
UNLESS OTHERWISE SPECIFIED:
SCALE: 1:20 WEIGHT:
REVDWG. NO.
D
SIZE
TITLE:
NAME DATE
COMMENTS:
Q.A.
MFG APPR.
ENG APPR.
CHECKED
DRAWN
FINISH
H-239 Length 116", HOIST
DIMENSIONS ARE IN INCHES
TOLERANCES:
FRACTIONAL
ANGULAR: MACH BEND
TWO PLACE DECIMAL
THREE PLACE DECIMAL
NEXT ASSY
0.27 THRU
.7
2.00 2.88 6.00 6.13 8.00
.0
.6
.0
.6
.7
.7
.7
1.25 2.00 6.00 8.00
.0
.6
.7
.1
.7
.7
.7
2.00 2.06 5.94 6.00 8.00
.0
.7
.7
.7
0.56 THRU
0.56 THRU
0.56 THRU
0.005
APPLICATION
USED ON
A A
B B
C C
D D
H-240
FRP
MATERIAL
INTERPRET GEOMETRIC Platform Beam, Back
DO NOT SCALE DRAWING
H-240
SHEET 1 OF 1
UNLESS OTHERWISE SPECIFIED:
SCALE: 1:10 WEIGHT:
REVDWG. NO.
D
SIZE
TITLE:
NAME DATE
COMMENTS:
Q.A.
MFG APPR.
ENG APPR.
CHECKED
DRAWN
Length 148.75", HOIST, TOLERANCING PER:
FINISH
DIMENSIONS ARE IN INCHES
TOLERANCES:
FRACTIONAL
ANGULAR: MACH BEND
TWO PLACE DECIMAL 0.01
THREE PLACE DECIMAL
NEXT ASSY
NOTES:
1. FRP BEAM BASED ON WIDE FLANGE BEAM BEDFORD REINFORCED
PLASTICS PART NUMBER WFB8X8X1/2GY22-401
2. APPROVED FOR PUBLIC RELEASE; DISTRIBUTION IS UNLMITED
3. QUANTITY TAKE OFF: 1
0.56 THRU
0.27 THRU
.6
.7
.0
.7
.7
.7
2.00 2.06 5.94
8.00
6.13
.6
.6
.6
.8
.1
.0
.7
.7
.7
2.00 2.50 2.88 5.50 6.00
8.00
5.25
.7
.8
.6
.5
.1
.6
.5
.5
.7
1.25 2.75 2.94 4.94
8.00
NOTES:
1. FRP BEAM SHALL BE WIDE FLANGE BEAM BEDFORD REINFORCED
PLASTICS PART NUMBER WFB8X8X1/2GY22-401
2. APPROVED FOR PUBLIC RELEASE; DISTRIBUTION IS UNLMITED
3. QUANTITY TAKE OFF: 1
0.56 THRU
0.56 THRU
0.005
APPLICATION
USED ON
A A
B B
C C
D D
H-241
FRP
MATERIAL
INTERPRET GEOMETRIC Platform Beam, Front
DO NOT SCALE DRAWING
H-241
SHEET 1 OF 1
UNLESS OTHERWISE SPECIFIED:
SCALE: 1:10 WEIGHT:
REVDWG. NO.
D
SIZE
TITLE:
NAME DATE
COMMENTS:
Q.A.
MFG APPR.
ENG APPR.
CHECKED
DRAWN
Length 148.75", HOIST, TOLERANCING PER:
FINISH
DIMENSIONS ARE IN INCHES
TOLERANCES:
FRACTIONAL
ANGULAR: MACH BEND
TWO PLACE DECIMAL 0.01
THREE PLACE DECIMAL
NEXT ASSY
7.13 8.00
2.88 6.00 6.13
2.00
6.75 8.00
.7
5.94
2.06
8.00
0.56 THRU
NOTES:
1. FRP BEAM BASED ON WIDE FLANGE BEAM BEDFORD REINFORCED
PLASTICS PART NUMBER WFB8X8X1/2GY22-401
2. APPROVED FOR PUBLIC RELEASE; DISTRIBUTION IS UNLMITED
3. QUANTITY TAKE OFF: 1
0.005
APPLICATION
USED ON
A A
B B
C C
D D
H-242
FRP
MATERIAL
INTERPRET GEOMETRIC Platform Beam Right Side
DO NOT SCALE DRAWING
H-242
SHEET 1 OF 1
UNLESS OTHERWISE SPECIFIED:
SCALE: 1:10 WEIGHT:
REVDWG. NO.
D
SIZE
TITLE:
NAME DATE
COMMENTS:
Q.A.
MFG APPR.
ENG APPR.
CHECKED
DRAWN
Length 87.5, HOIST, TOLERANCING PER:
FINISH
DIMENSIONS ARE IN INCHES
TOLERANCES:
FRACTIONAL
ANGULAR: MACH BEND
TWO PLACE DECIMAL 0.01
THREE PLACE DECIMAL
NEXT ASSY
7.13 8.00
.7
.7
.7
.7
2.88
.0
.7
.3
1.25
5.94
0.27 THRU
APPLICATION
UNLESS OTHERWISE SPECIFIED:
A A
B B
C C
D D
TOLERANCING PER:
INTERPRET GEOMETRIC Platform Beam, Stair Side
DO NOT SCALE DRAWING
SHEET 1 OF 1
DWG. NO.
H-243
WEIGHT:
REV
SCALE: 1:10
D
SIZE
TITLE:
NAME DATE
COMMENTS:
Q.A.
MFG APPR.
ENG APPR.
CHECKED
DRAWN
FINISH
H-243 Length 87.5, HOIST, MATERIAL
USED ON
DIMENSIONS ARE IN INCHES
TOLERANCES:
FRACTIONAL
ANGULAR: MACH BEND
TWO PLACE DECIMAL
THREE PLACE DECIMAL
NEXT ASSY
0.56 THRU
NOTES:
1. FRP BEAM BASED ON WIDE FLANGE BEAM BEDFORD REINFORCED
PLASTICS PART NUMBER WFB8X8X1/2GY22-401
2. APPROVED FOR PUBLIC RELEASE; DISTRIBUTION IS UNLMITED
6.00
8.00
.7
.7
2.06
5.94 6.00 8.00
6.13
8.00
.7
0.56 THRU
NOTES:
1. FRP BEAM SHALL BE WIDE FLANGE BEAM BEDFORD REINFORCED
PLASTICS PART NUMBER WFB8X8X1/2GY22-401
2. APPROVED FOR PUBLIC RELEASE; DISTRIBUTION IS UNLMITED
3. QUANTITY TAKE OFF: 1
0.56 THRU
0.005
APPLICATION
USED ON
A A
B B
C C
D D
H-244
FRP
MATERIAL
INTERPRET GEOMETRIC Platform Beam
DO NOT SCALE DRAWING
H-244
SHEET 1 OF 1
UNLESS OTHERWISE SPECIFIED:
SCALE: 1:10 WEIGHT:
REVDWG. NO.
D
SIZE
TITLE:
NAME DATE
COMMENTS:
Q.A.
MFG APPR.
ENG APPR.
CHECKED
DRAWN
Length 87.5, HOIST, TOLERANCING PER:
FINISH
DIMENSIONS ARE IN INCHES
TOLERANCES:
FRACTIONAL
ANGULAR: MACH BEND
TWO PLACE DECIMAL 0.01
THREE PLACE DECIMAL
38.88
40.88
.8
.0
.0
.0
1.75
3.75
42.63
38.88
.0
3.75
21.31
42.63
NOTES:
1. FRP BEAM SHALL BE WIDE FLANGE BEAM BEDFORD REINFORCED
PLASTICS PART NUMBER WFB8X8X1/2GY22-401
2. APPROVED FOR PUBLIC RELEASE; DISTRIBUTION IS UNLMITED
3. QUANTITY TAKE OFF: 4
0.005
APPLICATION
USED ON
A A
B B
C C
D D
H-245
FRP
TOLERANCING PER:
Length 42.625", HOIST, Lateral Supports
DO NOT SCALE DRAWING
H-245
SHEET 1 OF 1
UNLESS OTHERWISE SPECIFIED:
SCALE: 1:5 WEIGHT:
REVDWG. NO.
D
SIZE
TITLE:
NAME DATE
COMMENTS:
Q.A.
MFG APPR.
ENG APPR.
CHECKED
DRAWN
MATERIAL
INTERPRET GEOMETRIC
FINISH
Platform Beam Left and Right
DIMENSIONS ARE IN INCHES
TOLERANCES:
FRACTIONAL
ANGULAR: MACH BEND
TWO PLACE DECIMAL 0.01
THREE PLACE DECIMAL
NEXT ASSY
5.50
.7
7.13 8.00
8.00
NOTES:
1. FRP BEAM SHALL BE WIDE FLANGE BEAM BEDFORD REINFORCED
PLASTICS PART NUMBER WFB8X8X1/2GY22-401
2. APPROVED FOR PUBLIC RELEASE; DISTRIBUTION IS UNLMITED
3. QUANTITY TAKE OFF: 1
0.005
APPLICATION
USED ON
A A
B B
C C
D D
H-246
FRP
MATERIAL
INTERPRET GEOMETRIC Beam Ledge Middle
DO NOT SCALE DRAWING
H-246
SHEET 1 OF 1
UNLESS OTHERWISE SPECIFIED:
SCALE: 1:5 WEIGHT:
REVDWG. NO.
D
SIZE
TITLE:
NAME DATE
COMMENTS:
Q.A.
MFG APPR.
ENG APPR.
CHECKED
DRAWN
Length 55.5", HOIST, Platform
TOLERANCING PER:
FINISH
DIMENSIONS ARE IN INCHES
TOLERANCES:
FRACTIONAL
ANGULAR: MACH BEND
TWO PLACE DECIMAL 0.01
THREE PLACE DECIMAL
NEXT ASSY
.7
8.00
2.88
.7
6.75 8.00
.7
1. FRP BEAM SHALL BE WIDE FLANGE BEAM BEDFORD REINFORCED
PLASTICS PART NUMBER WFB8X8X1/2GY22-401
2. APPROVED FOR PUBLIC RELEASE; DISTRIBUTION IS UNLMITED
3. QUANTITY TAKE OFF: 1
0.53 THRU
APPLICATION
DWG. NO.
A A
B B
C C
D D
0.005 H-247
INTERPRET GEOMETRIC Beam Ledge Left Side
DO NOT SCALE DRAWING SCALE: 1:5 SHEET 1 OF 1
FRP
USED ON
WEIGHT:
REV
UNLESS OTHERWISE SPECIFIED:
D
SIZE
TITLE:
NAME DATE
COMMENTS:
Q.A.
MFG APPR.
ENG APPR.
CHECKED
DRAWN
FINISH
TOLERANCING PER:
Length 55.5", HOIST, Platform
MATERIAL
H-247
DIMENSIONS ARE IN INCHES
TOLERANCES:
FRACTIONAL
ANGULAR: MACH BEND
TWO PLACE DECIMAL 0.01
THREE PLACE DECIMAL
2.97
.7
8.00
1.03
.7
.7
2.50 2.88 5.50 6.00 6.13
APPLICATION
DWG. NO.
A A
B B
C C
D D
0.005
H-248
INTERPRET GEOMETRIC
Beam Ledge Right Side
DO NOT SCALE DRAWING
FRP
SHEET 1 OF 1
USED ON H-248
WEIGHT:
REV
SCALE: 1:5
D
SIZE
TITLE:
NAME DATE
COMMENTS:
Q.A.
MFG APPR.
ENG APPR.
CHECKED
DRAWN
FINISH
TOLERANCING PER:
Length 55.5", HOIST, Platform
MATERIAL
UNLESS OTHERWISE SPECIFIED:
DIMENSIONS ARE IN INCHES
TOLERANCES:
FRACTIONAL
ANGULAR: MACH BEND
TWO PLACE DECIMAL 0.01
THREE PLACE DECIMAL
NEXT ASSY
0.27 THRU
0.53 THRU
NOTES:
1. FRP BEAM SHALL BE WIDE FLANGE BEAM BEDFORD REINFORCED
PLASTICS PART NUMBER WFB8X8X1/2GY22-401
2. APPROVED FOR PUBLIC RELEASE; DISTRIBUTION IS UNLMITED
5.50
.0
.0
.0
.0
.3
3.13
8.00
NOTES:
1. FRP BEAM SHALL BE WIDE FLANGE BEAM BEDFORD REINFORCED
PLASTICS PART NUMBER WFB8X8X1/2GY22-401
2. APPROVED FOR PUBLIC RELEASE; DISTRIBUTION IS UNLMITED
3. QUANTITY TAKE OFF: 1
0.56 THRU
0.27 THRU
0.56 THRU
0.005
APPLICATION
USED ON
A A
B B
C C
D D
H-249
FRP
MATERIAL
INTERPRET GEOMETRIC Platform Beam
DO NOT SCALE DRAWING
H-249
SHEET 1 OF 1
UNLESS OTHERWISE SPECIFIED:
SCALE: 1:5 WEIGHT:
REVDWG. NO.
D
SIZE
TITLE:
NAME DATE
COMMENTS:
Q.A.
MFG APPR.
ENG APPR.
CHECKED
DRAWN
Length 78.5", HOIST, TOLERANCING PER:
FINISH
DIMENSIONS ARE IN INCHES
TOLERANCES:
FRACTIONAL
ANGULAR: MACH BEND
TWO PLACE DECIMAL 0.01
THREE PLACE DECIMAL
0.53 THRU
.0
28°
0 0
2.52 2.66 6.00
.1
.8
.2
118°
NOTES:
1. FRP BEAM SHALL BE I BEAM BEDFORD REINFORCED PLASTICS PART NUMBER IB6X3X3/8GY22-
2. APPROVED FOR PUBLIC RELEASE; DISTRIBUTION IS UNLMITED
3. QUANTITY TAKE OFF: 2
0.56 THRU
0.005
APPLICATION
USED ON
A A
B B
C C
D D
H-250
FRP
MATERIAL
INTERPRET GEOMETRIC Angle Support
DO NOT SCALE DRAWING
H-250
SHEET 1 OF 1
UNLESS OTHERWISE SPECIFIED:
SCALE: 1:10 WEIGHT:
REVDWG. NO.
D
SIZE
TITLE:
NAME DATE
COMMENTS:
Q.A.
MFG APPR.
ENG APPR.
CHECKED
DRAWN
Length 119", Hoist Ledge
TOLERANCING PER:
FINISH
DIMENSIONS ARE IN INCHES
TOLERANCES:
FRACTIONAL
ANGULAR: MACH BEND
TWO PLACE DECIMAL 0.01
3.56
6.00
.9
.0
1. FRP BEAM SHALL BE I BEAM BEDFORD REINFORCED PLASTICS PART NUMBER IB6X3X3/8GY22-401
2. APPROVED FOR PUBLIC RELEASE; DISTRIBUTION IS UNLMITED
3. QUANTITY TAKE OFF: 14
0.005
APPLICATION
USED ON
A A
B B
C C
D D
INTERPRET GEOMETRIC
H-251 Length 48", Angle
TOLERANCING PER:
Bracket Support
DO NOT SCALE DRAWING
H-251
SHEET 1 OF 1
UNLESS OTHERWISE SPECIFIED:
SCALE: 1:5 WEIGHT:
REVDWG. NO.
D
SIZE
TITLE:
NAME DATE
COMMENTS:
Q.A.
MFG APPR.
ENG APPR.
CHECKED
DRAWN
FRP
FINISH
MATERIAL
DIMENSIONS ARE IN INCHES
TOLERANCES:
FRACTIONAL
ANGULAR: MACH BEND
TWO PLACE DECIMAL 0.01
THREE PLACE DECIMAL
.7
6.00
7.13 8.00
2.06
5.94 6.00 8.00
8.00
0.56 THRU
NOTES:
1. FRP BEAM SHALL BE WIDE FLANGE BEAM BEDFORD REINFORCED
PLASTICS PART NUMBER WFB8X8X1/2GY22-401
2. APPROVED FOR PUBLIC RELEASE; DISTRIBUTION IS UNLMITED
3. QUANTITY TAKE OFF: 1
0.005
APPLICATION
USED ON
A A
B B
C C
D D
H-252
FRP
TOLERANCING PER:
Post Hoist, Platform, WF I
Lateral
DO NOT SCALE DRAWING
H-252
SHEET 1 OF 1
UNLESS OTHERWISE SPECIFIED:
SCALE: 1:10 WEIGHT:
REVDWG. NO.
D
SIZE
TITLE:
NAME DATE
COMMENTS:
Q.A.
MFG APPR.
ENG APPR.
CHECKED
DRAWN
MATERIAL
INTERPRET GEOMETRIC
FINISH
Beam, x 87.5 Long Right
DIMENSIONS ARE IN INCHES
TOLERANCES:
FRACTIONAL
ANGULAR: MACH BEND
TWO PLACE DECIMAL 0.01
THREE PLACE DECIMAL
NEXT ASSY
.7
.7
2.00
7.50 6.00
0.56 THRU
NOTES:
1. FRP BEAM SHALL BE WIDE FLANGE BEAM BEDFORD REINFORCED
PLASTICS PART NUMBER WFB8X8X1/2GY22-401
2. APPROVED FOR PUBLIC RELEASE; DISTRIBUTION IS UNLMITED
3. QUANTITY TAKE OFF: 2
APPLICATION
DWG. NO.
A A
B B
C C
D D
0.005
SHEET 1 OF 1
H-253
0.01
DO NOT SCALE DRAWING
USED ONNEXT ASSY
FRP
UNLESS OTHERWISE SPECIFIED:
SCALE: 1:5
REV
Supports
WEIGHT:
SIZE
TITLE:
NAME DATE
COMMENTS:
Q.A.
MFG APPR.
ENG APPR.
CHECKED
DRAWN
FINISH
INTERPRET GEOMETRIC
THREE PLACE DECIMAL
MATERIAL
TOLERANCING PER:
DIMENSIONS ARE IN INCHES
TOLERANCES:
FRACTIONAL
ANGULAR: MACH BEND
TWO PLACE DECIMAL
H-253 Length 54", HOIST, Platform
Beam Middle Lateral
D
0.50
.7
7.50
5.63
NOTES:
1. FRP BEAM SHALL BE WIDE FLANGE BEAM BEDFORD REINFORCED
PLASTICS PART NUMBER WFB8X8X1/2GY22-401
2. APPROVED FOR PUBLIC RELEASE; DISTRIBUTION IS UNLMITED
3. QUANTITY TAKE OFF: 1
APPLICATION
DWG. NO.
A A
B B
C C
D D
TOLERANCING PER:
USED ON
HOIST, Platform, WF I Beam, Ledge Support
DO NOT SCALE DRAWING SCALE: 1:5 SHEET 1 OF 1
H-254
WEIGHT:
REV
UNLESS OTHERWISE SPECIFIED:
D
SIZE
TITLE:
NAME DATE
COMMENTS:
Q.A.
MFG APPR.
ENG APPR.
CHECKED
DRAWN
FINISH
INTERPRET GEOMETRIC
Middle Section, Bottom
MATERIAL
H-254
DIMENSIONS ARE IN INCHES
TOLERANCES:
FRACTIONAL
ANGULAR: MACH BEND
TWO PLACE DECIMAL
THREE PLACE DECIMAL
NEXT ASSY
° 2.52
2.66 3.76 6.00
.1
.7
.0
.2
.8
.0
62°
28°
62°
6.00
0.56 THRU
NOTES:
1. FRP BEAM SHALL BE I BEAM BEDFORD REINFORCED PLASTICS PART NUMBER
IB6X3X3/8GY22-401
2. APPROVED FOR PUBLIC RELEASE; DISTRIBUTION IS UNLMITED
3. QUANTITY TAKE OFF: 1
APPLICATION SCALE: 1:10
A A
B B
C C
D D
0.005
H-255
INTERPRET GEOMETRIC Angle Support
DO NOT SCALE DRAWING
USED ON
SHEET 1 OF 1
FRP
UNLESS OTHERWISE SPECIFIED:
WEIGHT:
REV
H-255D
SIZE
TITLE:
NAME DATE
COMMENTS:
Q.A.
MFG APPR.
ENG APPR.
CHECKED
DRAWN
FINISH
TOLERANCING PER:
Length 119", Hoist Ledge
MATERIAL DWG. NO.
DIMENSIONS ARE IN INCHES
TOLERANCES:
FRACTIONAL
ANGULAR: MACH BEND
TWO PLACE DECIMAL 0.01
5.25
8.00
.7
NOTES:
1. FRP BEAM SHALL BE WIDE FLANGE BEAM BEDFORD REINFORCED
PLASTICS PART NUMBER WFB8X8X1/2GY22-401
2. APPROVED FOR PUBLIC RELEASE; DISTRIBUTION IS UNLMITED
3. QUANTITY TAKE OFF: 2
0.005
APPLICATION
USED ON
A A
B B
C C
D D
H-256
FRP
MATERIAL
INTERPRET GEOMETRIC Upper Hoist Support
DO NOT SCALE DRAWING
H-256
SHEET 1 OF 1
UNLESS OTHERWISE SPECIFIED:
SCALE: 1:10 WEIGHT:
REVDWG. NO.
D
SIZE
TITLE:
NAME DATE
COMMENTS:
Q.A.
MFG APPR.
ENG APPR.
CHECKED
DRAWN
Length 89.5", HOIST, Rear
TOLERANCING PER:
FINISH
DIMENSIONS ARE IN INCHES
TOLERANCES:
FRACTIONAL
ANGULAR: MACH BEND
TWO PLACE DECIMAL 0.01
THREE PLACE DECIMAL
.7
2.00 2.75 5.25 6.00 8.00
.0
.7
.7
.7
5.00 8.00
.7
NOTES:
1. FRP BEAM SHALL BE WIDE FLANGE BEAM BEDFORD REINFORCED
PLASTICS PART NUMBER WFB8X8X1/2GY22-401
2. APPROVED FOR PUBLIC RELEASE; DISTRIBUTION IS UNLMITED
3. QUANTITY TAKE OFF: 1
0.005
APPLICATION
USED ON
A A
B B
C C
D D
H-257
FRP
TOLERANCING PER:
Length 148.75", HOIST, Beam Hoist Support
DO NOT SCALE DRAWING
H-257
SHEET 1 OF 1
UNLESS OTHERWISE SPECIFIED:
SCALE: 1:10 WEIGHT:
REVDWG. NO.
D
SIZE
TITLE:
NAME DATE
COMMENTS:
Q.A.
MFG APPR.
ENG APPR.
CHECKED
DRAWN
MATERIAL
INTERPRET GEOMETRIC
FINISH
Platform Beam, Rear Upper
DIMENSIONS ARE IN INCHES
TOLERANCES:
FRACTIONAL
ANGULAR: MACH BEND
TWO PLACE DECIMAL 0.01
1.22 2.00
.0
6.00
.3
4.78
.5
6.00
.5
APPLICATION
DWG. NO.
A A
B B
C C
D D
0.005
H-258
UNLESS OTHERWISE SPECIFIED:
Length 133.5", Rectangular
Cable Housing
DO NOT SCALE DRAWING
FRP
SHEET 1 OF 1SCALE: 1:10
USED ON
WEIGHT:
REV
H-258D
SIZE
TITLE:
NAME DATE
COMMENTS:
Q.A.
MFG APPR.
ENG APPR.
CHECKED
DRAWN
FINISH
INTERPRET GEOMETRIC
Tubing, HOIST, Hoist Motor
MATERIAL
TOLERANCING PER:
DIMENSIONS ARE IN INCHES
TOLERANCES:
FRACTIONAL
ANGULAR: MACH BEND
TWO PLACE DECIMAL 0.01
THREE PLACE DECIMAL
NEXT ASSY
NOTES:
1. FRP RECTANGULAR TUBING SHALL BE RECTANGLE BEDFORD
REINFORCED PLASTICS PART NUMBER REC 6X4X1/4-2GY22-401
2. APPROVED FOR PUBLIC RELEASE; DISTRIBUTION IS UNLMITED
3. QUANTITY TAKE OFF: 1
0.81 THRU
0.40 THRU
6.00 8.00 10.00
.5
.7
.2
10.00
1.28
.2
NOTES:
1. FRP CHANNEL SHALL BE CHANNEL BEDFORD REINFORCED
PLASTICS PART NUMBER CH10X2_3/4X1/2GY-401
2. APPROVED FOR PUBLIC RELEASE; DISTRIBUTION IS UNLMITED
3. QUANTITY TAKE OFF: 1
0.005
APPLICATION
USED ON
A A
B B
C C
D D
H-259
FRP
MATERIAL
INTERPRET GEOMETRIC Motor Support Channel
DO NOT SCALE DRAWING
H-259
SHEET 1 OF 1
UNLESS OTHERWISE SPECIFIED:
SCALE: 1:10 WEIGHT:
REVDWG. NO.
D
SIZE
TITLE:
NAME DATE
COMMENTS:
Q.A.
MFG APPR.
ENG APPR.
CHECKED
DRAWN
Length 140.25", Hoist
TOLERANCING PER:
FINISH
DIMENSIONS ARE IN INCHES
TOLERANCES:
FRACTIONAL
ANGULAR: MACH BEND
TWO PLACE DECIMAL 0.01
.0
5.63
NOTES:
1. FRP BEAM SHALL BE I BEAM BEDFORD REINFORCED PLASTICS PART NUMBER
IB6X3X3/8GY22-401
2. APPROVED FOR PUBLIC RELEASE; DISTRIBUTION IS UNLMITED
3. QUANTITY TAKE OFF: 2
0.56 THRU
0.005
DO NOT SCALE DRAWING
USED ON
A A
B B
C C
D D
H-260
FRP
SHEET 1 OF 1
TOLERANCING PER:
Length 42.625", Hoist Front
Support
H-260
UNLESS OTHERWISE SPECIFIED:
REV
SCALE: 1:5 WEIGHT: APPLICATION
DWG. NO.
D
SIZE
TITLE:
NAME DATE
COMMENTS:
Q.A.
MFG APPR.
ENG APPR.
CHECKED
DRAWN
MATERIAL
INTERPRET GEOMETRIC
FINISH
Bottom Left and Right
DIMENSIONS ARE IN INCHES
TOLERANCES:
FRACTIONAL
ANGULAR: MACH BEND
TWO PLACE DECIMAL 0.01
6.00
0.005
UNLESS OTHERWISE SPECIFIED:
USED ON
A A
B B
C C
D D
H-261
FRP
MATERIAL
INTERPRET GEOMETRIC and Right Support
SHEET 1 OF 1
H-261
REV
DO NOT SCALE DRAWING SCALE: 1:5 WEIGHT:
DWG. NO.
D
SIZE
TITLE:
NAME DATE
COMMENTS:
Q.A.
MFG APPR.
ENG APPR.
CHECKED
DRAWN
Length 80", Hoist Bottom Left
TOLERANCING PER:
FINISH
APPLICATION
DIMENSIONS ARE IN INCHES
TOLERANCES:
FRACTIONAL
ANGULAR: MACH BEND
TWO PLACE DECIMAL 0.01
THREE PLACE DECIMAL
NEXT ASSY
NOTES:
1. FRP BEAM SHALL BE I BEAM BEDFORD REINFORCED PLASTICS PART NUMBER IB6X3X3/8GY22-401
2. APPROVED FOR PUBLIC RELEASE; DISTRIBUTION IS UNLMITED
.0
NOTES:
1. FRP BEAM SHALL BE I BEAM BEDFORD REINFORCED PLASTICS PART NUMBER
IB6X3X3/8GY22-401
2. APPROVED FOR PUBLIC RELEASE; DISTRIBUTION IS UNLMITED
3. QUANTITY TAKE OFF: 1
0.56 THRU
UNLESS OTHERWISE SPECIFIED:
USED ON
A A
B B
C C
D D
DO NOT SCALE DRAWING
0.005
H-262
INTERPRET GEOMETRIC Middle Bottom Support
APPLICATION
H-262
REV
SCALE: 1:5 WEIGHT: SHEET 1 OF 1
DWG. NO.
D
SIZE
TITLE:
NAME DATE
COMMENTS:
Q.A.
MFG APPR.
ENG APPR.
CHECKED
DRAWN
FINISH
TOLERANCING PER:
Length 46.5", Hoist
MATERIAL
FRP
DIMENSIONS ARE IN INCHES
TOLERANCES:
FRACTIONAL
ANGULAR: MACH BEND
TWO PLACE DECIMAL 0.01
8.13
39.25
1.50
0.005
APPLICATION
USED ON
A A
B B
C C
D D
H-263
FRP
TOLERANCING PER:
Hoist, 60x39.25, 1 1/2"x 3/4" x
Grating w/ Grit
DO NOT SCALE DRAWING
H-263
SHEET 1 OF 1
UNLESS OTHERWISE SPECIFIED:
SCALE: 1:5 WEIGHT:
REVDWG. NO.
D
SIZE
TITLE:
NAME DATE
COMMENTS:
Q.A.
MFG APPR.
ENG APPR.
CHECKED
DRAWN
MATERIAL
INTERPRET GEOMETRIC
FINISH
3/4" Square Grid Yellow
DIMENSIONS ARE IN INCHES
TOLERANCES:
FRACTIONAL
ANGULAR: MACH BEND
TWO PLACE DECIMAL 0.01
THREE PLACE DECIMAL
NEXT ASSY
NOTES:
1. FRP GRATING SHALL BE BEDFORD REINFORCED PLASTICS PRO GRID
PART NUMBER GP15-Y-G32
2. GRATING SIMPLIFIED FOR MODEL. GRATING IS SQUARE GRID 1-1/2"X1-
1/2"X1-1/2" WITH GRIT
3. APPROVED FOR PUBLIC RELEASE; DISTRIBUTION IS UNLMITED
4. QUANTITY TAKE OFF: 1
1.50
3.50
39.25
.1
3.63
1. FRP GRATING SHALL BE BEDFORD REINFORCED PLASTICS PRO GRID
PART NUMBER GP15-Y-G32
2. GRATING SIMPLIFIED FOR MODEL. GRATING IS SQUARE GRID 1-1/2"X1-
1/2"X1-1/2" WITH GRIT
3. APPROVED FOR PUBLIC RELEASE; DISTRIBUTION IS UNLMITED
4. QUANTITY TAKE OFF: 1
0.005
APPLICATION
USED ON
A A
B B
C C
D D
H-264
FRP
TOLERANCING PER:
Hoist, 60x39.25 w/Controls Cutout, Yellow Grating w/ Grit
DO NOT SCALE DRAWING
H-264
SHEET 1 OF 1
UNLESS OTHERWISE SPECIFIED:
SCALE: 1:5 WEIGHT:
REVDWG. NO.
D
SIZE
TITLE:
NAME DATE
COMMENTS:
Q.A.
MFG APPR.
ENG APPR.
CHECKED
DRAWN
MATERIAL
INTERPRET GEOMETRIC
FINISH
1 1/2"x 3/4" x 3/4" Square Grid
DIMENSIONS ARE IN INCHES
TOLERANCES:
FRACTIONAL
ANGULAR: MACH BEND
TWO PLACE DECIMAL 0.01
THREE PLACE DECIMAL
TEXTURE THIS FACAE
52.75
1.50
NOTES:
1. FRP GRATING SHALL BE BEDFORD REINFORCED PLASTICS PRO GRID
PART NUMBER GP15-Y-G32
2. GRATING SIMPLIFIED FOR MODEL. GRATING IS SQUARE GRID 1-1/2"X1-
1/2"X1-1/2" WITH GRIT
3. APPROVED FOR PUBLIC RELEASE; DISTRIBUTION IS UNLMITED
4. QUANTITY TAKE OFF: 1
TEXTURE THIS FACE
DWG. NO.
A A
B B
C C
D D
USED ON
APPLICATION
0.005
H-265
Grit
DO NOT SCALE DRAWING
FRP
SHEET 1 OF 1
H-265
UNLESS OTHERWISE SPECIFIED:
WEIGHT:
REV
SCALE: 1:5
D
SIZE
TITLE:
NAME DATE
COMMENTS:
Q.A.
MFG APPR.
ENG APPR.
CHECKED
DRAWN
FINISH
MATERIAL
Square Grid Yellow Grating w/
TOLERANCING PER:
INTERPRET GEOMETRIC
Hoist, 52.75x33, 1 1/2"x 3/4" x 3/4"
DIMENSIONS ARE IN INCHES
TOLERANCES:
FRACTIONAL
ANGULAR: MACH BEND
TWO PLACE DECIMAL 0.01
39.88
12.88
48.00
1.50
TEXTURE THIS FACE
NOTES:
1. FRP GRATING SHALL BE BEDFORD REINFORCED PLASTICS PRO GRID
PART NUMBER GP15-Y-G32
2. GRATING SIMPLIFIED FOR MODEL. GRATING IS SQUARE GRID 1-1/2"X1-
1/2"X1-1/2" WITH GRIT
3. APPROVED FOR PUBLIC RELEASE; DISTRIBUTION IS UNLMITED
4. QUANTITY TAKE OFF: 1
0.005
APPLICATION
USED ON
A A
B B
C C
D D
H-266
FRP
TOLERANCING PER:
Hoist, 48x96, 1 1/2"x 3/4" x 3/4"
Grit
DO NOT SCALE DRAWING
H-266
SHEET 1 OF 1
UNLESS OTHERWISE SPECIFIED:
SCALE: 1:10 WEIGHT:
REVDWG. NO.
D
SIZE
TITLE:
NAME DATE
COMMENTS:
Q.A.
MFG APPR.
ENG APPR.
CHECKED
DRAWN
MATERIAL
INTERPRET GEOMETRIC
FINISH
Square Grid Yellow Grating w/
DIMENSIONS ARE IN INCHES
TOLERANCES:
FRACTIONAL
ANGULAR: MACH BEND
TWO PLACE DECIMAL 0.01
38.75
.3
22.50
25.75
35.13
48.00
NOTES:
1. FRP GRATING SHALL BE BEDFORD REINFORCED PLASTICS PRO GRID
PART NUMBER GP15-Y-G32
2. GRATING SIMPLIFIED FOR MODEL. GRATING IS SQUARE GRID 1-1/2"X1-
1/2"X1-1/2" WITH GRIT
3. APPROVED FOR PUBLIC RELEASE; DISTRIBUTION IS UNLMITED
4. QUANTITY TAKE OFF: 1
TEXTURE THIS FACE
0.005
UNLESS OTHERWISE SPECIFIED:
USED ON
A A
B B
C C
D D
Hoist, 48x96 W/Controls
TOLERANCING PER: Square Grid Yellow Grating
APPLICATION
MATERIAL
INTERPRET GEOMETRIC
w/ Grit REV
H-267
DO NOT SCALE DRAWING SCALE: 1:10 WEIGHT: SHEET 1 OF 1
DWG. NO.
D
SIZE
TITLE:
NAME DATE
COMMENTS:
Q.A.
MFG APPR.
ENG APPR.
CHECKED
DRAWN
H-267
Cutout,1 1/2"x 3/4" x 3/4"
FINISH
FRP
DIMENSIONS ARE IN INCHES
TOLERANCES:
FRACTIONAL
ANGULAR: MACH BEND
TWO PLACE DECIMAL 0.01
NOTES:
1. FRP GRATING SHALL BE BEDFORD REINFORCED PLASTICS PRO GRID
PART NUMBER GP15-Y-G32
2. GRATING SIMPLIFIED FOR MODEL. GRATING IS SQUARE GRID 1-1/2"X1-
1/2"X1-1/2" WITH GRIT
3. APPROVED FOR PUBLIC RELEASE; DISTRIBUTION IS UNLMITED
4. QUANTITY TAKE OFF: 1
DWG. NO.
A A
B B
C C
D D
USED ON
APPLICATION
H-268
Grit
DO NOT SCALE DRAWING
SHEET 1 OF 1
H-268
UNLESS OTHERWISE SPECIFIED:
WEIGHT:
REV
SCALE: 1:5
D
SIZE
TITLE:
NAME DATE
COMMENTS:
Q.A.
MFG APPR.
ENG APPR.
CHECKED
DRAWN
FINISH
MATERIAL
Square Grid Yellow Grating w/
TOLERANCING PER:
INTERPRET GEOMETRIC
Hoist, 52.75x33, 1 1/2"x 3/4" x 3/4"
DIMENSIONS ARE IN INCHES
TOLERANCES:
FRACTIONAL
ANGULAR: MACH BEND
TWO PLACE DECIMAL
THREE PLACE DECIMAL
NOTES:
1. FRP GRATING SHALL BE BEDFORD REINFORCED PLASTICS PRO GRID
PART NUMBER GP15-Y-G32
2. GRATING SIMPLIFIED FOR MODEL. GRATING IS SQUARE GRID 1-1/2"X1-
1/2"X1-1/2" WITH GRIT
3. APPROVED FOR PUBLIC RELEASE; DISTRIBUTION IS UNLMITED
4. QUANTITY TAKE OFF: 1
0.005
APPLICATION
USED ON
A A
B B
C C
D D
H-269
FRP
TOLERANCING PER:
Hoist, 52.75x26, 1 1/2"x 3/4" x 3/4"
Grit
DO NOT SCALE DRAWING
H-269
SHEET 1 OF 1
UNLESS OTHERWISE SPECIFIED:
SCALE: 1:5 WEIGHT:
REVDWG. NO.
D
SIZE
TITLE:
NAME DATE
COMMENTS:
Q.A.
MFG APPR.
ENG APPR.
CHECKED
DRAWN
MATERIAL
INTERPRET GEOMETRIC
FINISH
Square Grid Yellow Grating w/
DIMENSIONS ARE IN INCHES
TOLERANCES:
FRACTIONAL
ANGULAR: MACH BEND
TWO PLACE DECIMAL 0.01
THREE PLACE DECIMAL
13.06
35.69
58.31
66.88
0.005
APPLICATION
USED ON
A A
B B
C C
D D
H-270
FRP
MATERIAL
INTERPRET GEOMETRIC Platform, Toe Kick
DO NOT SCALE DRAWING
H-270
SHEET 1 OF 1
UNLESS OTHERWISE SPECIFIED:
SCALE: 1:10 WEIGHT:
REVDWG. NO.
D
SIZE
TITLE:
NAME DATE
COMMENTS:
Q.A.
MFG APPR.
ENG APPR.
CHECKED
DRAWN
Length 63.875", POST, TOLERANCING PER:
FINISH
DIMENSIONS ARE IN INCHES
TOLERANCES:
FRACTIONAL
ANGULAR: MACH BEND
TWO PLACE DECIMAL 0.01
THREE PLACE DECIMAL
NEXT ASSY
NOTES:
1. FRP TOE PLATE SHALL BE TOE PLATE BEDFORD REINFORCED
PLASTICS PART NUMBER TOE4X5/8X1/8XYE22-401
2. APPROVED FOR PUBLIC RELEASE; DISTRIBUTION IS UNLMITED
45°
.0
16.06
34.31
51.50
NOTES:
1. FRP TOE PLATE SHALL BE TOE PLATE BEDFORD REINFORCED
PLASTICS PART NUMBER TOE4X5/8X1/8XYE22-401
2. APPROVED FOR PUBLIC RELEASE; DISTRIBUTION IS UNLMITED
3. QUANTITY TAKE OFF: 2
0.005
APPLICATION
USED ON
A A
B B
C C
D D
H-271
FRP
MATERIAL
INTERPRET GEOMETRIC Platform, Toe Kick
DO NOT SCALE DRAWING
H-271
SHEET 1 OF 1
UNLESS OTHERWISE SPECIFIED:
SCALE: 1:5 WEIGHT:
REVDWG. NO.
D
SIZE
TITLE:
NAME DATE
COMMENTS:
Q.A.
MFG APPR.
ENG APPR.
CHECKED
DRAWN
Length 47.75", POST, TOLERANCING PER:
FINISH
DIMENSIONS ARE IN INCHES
TOLERANCES:
FRACTIONAL
ANGULAR: MACH BEND
TWO PLACE DECIMAL 0.01
THREE PLACE DECIMAL
5°
5°
11.81
21.19
35.88
NOTES:
1. FRP TOE PLATE SHALL BE TOE PLATE BEDFORD REINFORCED
PLASTICS PART NUMBER TOE4X5/8X1/8XYE22-401
2. APPROVED FOR PUBLIC RELEASE; DISTRIBUTION IS UNLMITED
3. QUANTITY TAKE OFF: 2
0.005
APPLICATION
USED ON
A A
B B
C C
D D
H-272
FRP
MATERIAL
INTERPRET GEOMETRIC Platform, Toe Kick
DO NOT SCALE DRAWING
H-272
SHEET 1 OF 1
UNLESS OTHERWISE SPECIFIED:
SCALE: 1:5 WEIGHT:
REVDWG. NO.
D
SIZE
TITLE:
NAME DATE
COMMENTS:
Q.A.
MFG APPR.
ENG APPR.
CHECKED
DRAWN
Length 34.375", POST, TOLERANCING PER:
FINISH
DIMENSIONS ARE IN INCHES
TOLERANCES:
FRACTIONAL
ANGULAR: MACH BEND
TWO PLACE DECIMAL 0.01
THREE PLACE DECIMAL
1.13 2.00
.7
.5 0 0
.2
0.25
0.27 THRU
NOTES:
1. FRP ANGLE ON ANGLE BEDFORD REINFORCED PLASTICS PART NUMBER
ANG2X1/4GY22-401
2. APPROVED FOR PUBLIC RELEASE; DISTRIBUTION IS UNLMITED
3. QUANTITY TAKE OFF: 4
0.005
APPLICATION
USED ON
A A
B B
C C
D D
INTERPRET GEOMETRIC
H-273 ANG2x1_4 TOLERANCING PER: x 118.5
DO NOT SCALE DRAWING
H-273
SHEET 1 OF 1
UNLESS OTHERWISE SPECIFIED:
SCALE: 1:10 WEIGHT:
REVDWG. NO.
D
SIZE
TITLE:
NAME DATE
COMMENTS:
Q.A.
MFG APPR.
ENG APPR.
CHECKED
DRAWN
FRP
FINISH
MATERIAL
DIMENSIONS ARE IN INCHES
TOLERANCES:
FRACTIONAL
ANGULAR: MACH BEND
TWO PLACE DECIMAL 0.01
1.13
0.25
.0
2.00
NOTES:
1. FRP ANGLE ON ANGLE BEDFORD REINFORCED PLASTICS PART NUMBER
ANG2X1/4GY22-401
2. APPROVED FOR PUBLIC RELEASE; DISTRIBUTION IS UNLMITED
3. QUANTITY TAKE OFF: 4
0.005
APPLICATION
USED ON
A A
B B
C C
D D
INTERPRET GEOMETRIC
H-274 ANG2x1_4 TOLERANCING PER: x 90
DO NOT SCALE DRAWING
H-274
SHEET 1 OF 1
UNLESS OTHERWISE SPECIFIED:
SCALE: 1:10 WEIGHT:
REVDWG. NO.
D
SIZE
TITLE:
NAME DATE
COMMENTS:
Q.A.
MFG APPR.
ENG APPR.
CHECKED
DRAWN
FRP
FINISH
MATERIAL
DIMENSIONS ARE IN INCHES
TOLERANCES:
FRACTIONAL
ANGULAR: MACH BEND
TWO PLACE DECIMAL 0.01
0.25
1.13 2.00
1. FRP ANGLE ON ANGLE BEDFORD REINFORCED PLASTICS PART NUMBER
ANG2X1/4GY22-401
2. APPROVED FOR PUBLIC RELEASE; DISTRIBUTION IS UNLMITED
3. QUANTITY TAKE OFF: 4
0.005
APPLICATION
USED ON
A A
B B
C C
D D
INTERPRET GEOMETRIC
H-275 ANG2x1_4 TOLERANCING PER: x 97.ipt
DO NOT SCALE DRAWING
H-275
SHEET 1 OF 1
UNLESS OTHERWISE SPECIFIED:
SCALE: 1:10 WEIGHT:
REVDWG. NO.
D
SIZE
TITLE:
NAME DATE
COMMENTS:
Q.A.
MFG APPR.
ENG APPR.
CHECKED
DRAWN
FRP
FINISH
MATERIAL
DIMENSIONS ARE IN INCHES
TOLERANCES:
FRACTIONAL
ANGULAR: MACH BEND
TWO PLACE DECIMAL 0.01
THREE PLACE DECIMAL
° 0
20°
70°
40°
.1
.8
.4
.3
.8
.9
.5
0.88
.5
.3
.8
0.88 1.75
.8
.7
1.75
SECTION A-A
DRILL 3/4 HOLES AT 40 DEGREES
NOTES:
1. FRP SQUARE TUBE SHALL BE SQUARE TUBE BEDFORD REINFORCED
PLASTICS PART NUMBER SQTB1_3/4X1_3/4/YE22-401
2. APPROVED FOR PUBLIC RELEASE; DISTRIBUTION IS UNLMITED
3. QUANTITY TAKE OFF: 2
0.19 THRU
0.75 THRU AT 40
AA
UNLESS OTHERWISE SPECIFIED:
A A
B B
C C
D D
USED ON
APPLICATION
0.005
Bottom
DO NOT SCALE DRAWING
FRP
SHEET 1 OF 1
DWG. NO.
H-276
WEIGHT:
REV
SCALE: 1:10
D
SIZE
TITLE:
NAME DATE
COMMENTS:
Q.A.
MFG APPR.
ENG APPR.
CHECKED
DRAWN
FINISH
MATERIAL
2x2, Horizontal Rail, TOLERANCING PER:
INTERPRET GEOMETRIC
H-276 Hoist, Stairs, Rails, DIMENSIONS ARE IN INCHES
TOLERANCES:
FRACTIONAL
ANGULAR: MACH BEND
TWO PLACE DECIMAL 0.01
0.13
.1
.6
.6
DWG. NO.
A A
B B
C C
D D
FRP
APPLICATION
Kick Corner
DO NOT SCALE DRAWING
USED ON
SHEET 1 OF 1SCALE: 2:1
H-277
WEIGHT:
REV
UNLESS OTHERWISE SPECIFIED:
D
SIZE
TITLE:
NAME DATE
COMMENTS:
Q.A.
MFG APPR.
ENG APPR.
CHECKED
DRAWN
FINISH
MATERIAL
H-277 POST Hoist, Toe
TOLERANCING PER:
INTERPRET GEOMETRIC
0.005
DIMENSIONS ARE IN INCHES
TOLERANCES:
FRACTIONAL
ANGULAR: MACH BEND
TWO PLACE DECIMAL 0.01
THREE PLACE DECIMAL
NEXT ASSY
NOTE:
1. FRP SQUARE TUBE, SHALL USE SQUARE TUBE BEDFORD REINFORCED
PLASTICS PART NUMBER SQTB1_3/4X1_3/4/YE22-401
3. QUANTITY TAKE OFF: 4
0.38
2.00
4.00
5.63 6.00
.3
.6
3.00
.3
.3
1 0
0.005
USED ON
A A
B B
C C
D D
H-279 HOIST, I Beam, Hoist
FRP
MATERIAL
INTERPRET GEOMETRIC Support
DO NOT SCALE DRAWING
H-279
SHEET 1 OF 1
UNLESS OTHERWISE SPECIFIED:
SCALE: 1:1 WEIGHT:
REVDWG. NO.
D
SIZE
TITLE:
NAME DATE
COMMENTS:
Q.A.
MFG APPR.
ENG APPR.
CHECKED
DRAWN
Support to Control Box Lower
TOLERANCING PER:
FINISH
DIMENSIONS ARE IN INCHES
TOLERANCES:
FRACTIONAL
ANGULAR: MACH BEND
TWO PLACE DECIMAL 0.01
THREE PLACE DECIMAL
NEXT ASSY
NOTES:
1. FRP BEAM SHALL BE I BEAM BEDFORD REINFORCED PLASTICS PART
NUMBER IB6X3X3/8GY22-401
2. APPROVED FOR PUBLIC RELEASE; DISTRIBUTION IS UNLMITED
3. QUANTITY TAKE OFF: 2
0.53 THRU
2.06 5.94 6.00 8.00
.0
.7
0.69
5.94 7.31
.5
8.00
.7
NOTES:
1. FRP BEAM SHALL BE WIDE FLANGE BEAM BEDFORD REINFORCED
PLASTICS PART NUMBER WFB8X8X1/2GY22-401
2. APPROVED FOR PUBLIC RELEASE; DISTRIBUTION IS UNLMITED
3. QUANTITY TAKE OFF: 1
0.005
APPLICATION
USED ON
A A
B B
C C
D D
H-281
FRP
MATERIAL
INTERPRET GEOMETRIC Front Middle Left
DO NOT SCALE DRAWING
H-281
SHEET 1 OF 1
UNLESS OTHERWISE SPECIFIED:
SCALE: 1:10 WEIGHT:
REVDWG. NO.
D
SIZE
TITLE:
NAME DATE
COMMENTS:
Q.A.
MFG APPR.
ENG APPR.
CHECKED
DRAWN
Length 116", HOIST Column
TOLERANCING PER:
FINISH
DIMENSIONS ARE IN INCHES
TOLERANCES:
FRACTIONAL
ANGULAR: MACH BEND
TWO PLACE DECIMAL 0.01
THREE PLACE DECIMAL
NEXT ASSY
0.56 THRU
0°
45°
23.75
2.13
25.88 25.88
2.13
H-282
A A
B B
C C
D D
INTERPRET GEOMETRIC
BEND
NEXT ASSY
THREE PLACE DECIMAL
TWO PLACE DECIMAL
Horizontal Rail
DO NOT SCALE DRAWING
H-282
SHEET 1 OF 1
UNLESS OTHERWISE SPECIFIED:
SCALE: 1:5 WEIGHT:
REVDWG. NO.
D
SIZE
TITLE:
NAME DATE
COMMENTS:
Q.A.
MFG APPR.
ENG APPR.
CHECKED
DRAWN
Length 17.875", HOIST, FINISH
TOLERANCING PER:
MATERIAL
Fall Protection Gate, USED ON
APPLICATION
This is the start of the file's text. The full file is on GovTribe.
File details come from the government source that posted it. Updated .