7-B32 Existing Floor Box Power.pdf

Wiremold® Evolution™ Series Floor Boxes are the latest advancement in the most complete and innovative line of floor solutions in the industry.

In addition to a unique design that allows the same floor box to be used in multiple floor applications, high capacity and multi-functional capabilities make Evolution Series Floor Boxes ideal for areas where large capacity audio/video, power and communication services are needed. Ranging in size from 6- to 10-gangs of capacity, these boxes have completely finished interiors with removable modules that provide easy access for reconfiguring services. Evolution Series Floor Boxes are an ideal option for installations where services are constantly evolving, such as commercial offices, conference rooms, stages, and entertainment venues.

Evolution™ Series Floor Boxes

F E A T U R E S & B E N E F I T S

ED1662R1 – Updated August 2011 – For latest specs visit www.legrand.us/wiremold

Evolution™ Series – The Next Generation of Floor Boxes n One box many applications.

Evolution Series Floor Boxes are designed to work in concrete, raised and wood floor applications and are fully adjustable both pre- and post-concrete pour. A single box can be specified for multiple floor types without having to order additional components or accessories.

New Evolution Series Floor Boxes provide increased capacity options and a variety of innovations not available in any other floor boxes.

n Configurable with removable modules.

In addition to having removable dividers and a tunnel feature that allows all compartments to be connected, the modules are removable through the top or back of the floor box. This allows for easier installations and facilitates moves, adds and changes without having to disconnect services, saving time and money.

Raised Floors Concrete Floors Wood Floors n Durable 180° articulating hinge.

Hinge design enables covers to open a full 180° and lie flat on the floor surface with the durability to support a large cover. Provides easy access to all interior modules and activations while reducing tripping hazards.

n Audio/Video Design.

Evolution Series Floor Boxes have been developed specifically with the A/V industry in mind. With 3 1/2" - 3 7/8" [89mm x 98mm] of wiring capacity behind each device plate, these boxes will accept devices from leading A/V manufacturers including Extron® Electronics and Crestron®.

F E A T U R E S & B E N E F I T S (continued) n Multiple size knockouts.

All Evolution Series Floor Boxes are available with multiple trade size knockouts ranging in size from 3/4" to 2" allowing for multiple activations and wiring configurations.

n Die cast aluminum cover assemblies.

Evolution Series Floor Box Covers have been designed to work on multiple floor surfaces and are manufactured from die cast aluminum to provide strength and style. Decorative powder coat colors (black, brass, bronze, gray and nickel) will complement any room décor.

n Cable Management.

Allows multiple cables to be organized and controlled for easier cable egress.

n Large capacity.

6- to 10-gangs of capacity to accommodate power, communications, and A/V devices.

A minimum of 5" [127mm] of space between devices providing ample space for hand access when plugging and unplugging into the devices.

n Furniture Feed.

Designed to be installed in concrete, raised and wood floors. Provides large capacity feeds (up to 2").

Trade size knockouts for power, communications and A/V devices.

n Finished interior.

Fully finished interior removes the unfinished industrial look while increasing visibility, making it easier to see where to plug in devices.

n Accepts standard size wall plates.

Evolution Series Floor Boxes accept industry standard single-, double- and triple-gang wall plates from industry leading manufacturers.

n Auto-close egress doors.

Cable egress doors lock in position when open, and automatically closees around wires to protect cabling and reduce trip hazards.

n Fire Classified.

Evolution Floor Box has been designed to maintain the fire rating of the floor for up to 2 hours.

n Bare (polished) concrete and terrazzo applications.

Evolution Series Floor Box has been designed to be installed into bare (polished) concrete and terrazzo floors.

n Suitable for use in air handling spaces.

In accordance with Sec 300-22(c) of the National Electric Code.

n Meets ADA Accessibility Guidelines.

Trim flange is designed to meet the ADA Accessibility Guidelines as it pertains to ADA Standard 4.5, which addresses the change in floor and ground surface levels.

n TopGuardTM Protection.

Evolution Series Floor Box covers meet and exceed UL scrub water exclusion requirements for tile, carpet, wood, bare concrete and terrazzo floor coverings.

n UL Listed and Fire Classified to U.S. and Canadian safety standards.

UL Classified to maintain the integrity of 2-hour fire rated floor structures.

Evolution Series Floor Box Components

EFB6S

Evolution Series Floor Box Model Selection Guide

EVOLUTION

FLOOR BOX MODEL

INSTALL FLOOR TYPE:

BOX TYPE:

DEPTH BEHIND

PLATES:

COVERS:

KO SIZE RANGE:

(Trade Size)

FIRE RATING:

(Hours)

NOTES:

EFB6S-OG EFB6S-FC EFB8S EFB8S-OG EFB8S-FC EFB10S EFB10S-OG EFB10S-FC EFBFF EFBFF-OG

Concrete Floor Raised Floor Wood Floor

YES YES YES YES YES YES YES YES YES YES YES

YES YES YES YES

YES YES YES YES

Standard On-Grade Fire Classified

Standard On-Grade Fire Classified

Standard On-Grade Fire Classified

Furniture Feed

Furniture Feed

BOX CAPACITY: 6-Gangs 6-Gangs 6-Gangs 8-Gangs 8-Gangs 8-Gangs 10-Gangs 10-Gangs 10-Gangs 2-Gangs 2-Gangs

3 7/8" [98mm]

3 7/8" [98mm]

3 7/8" [98mm]

3 1/2" [89mm]

3 1/2" [89mm]

3 1/2" [89mm]

3 1/4" [81mm]

3 1/4" [81mm]

3 1/4" [81mm]

N/A N/A

REMOVABLE

MODULES:

YES YES YES YES YES YES YES YES YES

EFB610CTC Series, EFB610BTC Series, EFB610CT Series, EFB610BT Series Black, Gray, Brass, Nickel, Bronze

FPFFTC Series Black, Gray, Brass, Nickel, Bronze, Brushed Aluminum

COLORS:

FLOOR SURFACE: Carpet, Tile, Wood, Bare (Polished) Concrete & Terrazzo Carpet, Tile & Wood

3/4" to 2" 3/4" to 1 1/4" 1 1/4" 3/4" to 2" 3/4" to 2" 1 1/4" 3/4" to 2" 1" to 2" 1 1/4" 1/2" to 2" 1/2" to 2"

Up to 2 Hours

Up to 2 Hours

Up to 2 Hours

Covers open full 180°, Slide cable egress doors, Painted interior

Evolution Series Floor Box Compartment Volumes

EFB6 Series

MODEL OUTER COMPARTMENTS (Each) CENTER COMPARTMENTS (Each)

32 in.3 [524ml] 38.5 in.3 [630ml]

EFB8 Series 27.5 in.3 [450ml] 34 in.3 [557ml]

EFB10 Series 23.5 in.3 [385ml] 27.5 in.3 [450ml]

EFBFF Series 64.5 in.3 [1056ml] 64.5 in.3 [1056ml]

DEVICE PLATE SIZE: Uses Standard Size Device Plates:

Single-Gang (2 3/4" x 4 1/2")

[70mm x 114mm]

Uses Standard Size Device Plates:

Single-Gang (2 3/4" x 4 1/2") Double-Gang (4 9/16" x 4 1/2") Triple-Gang (6 3/8" x 4 1/2")

Uses non-standard size Device Plates (4.652" x 2.302") [117mm x 58mm]

Removable Module

Mud Cap (Temporary Construction Cover)

Tunnel

Cable Guide

Box

Mounting Bracket

Divider (Removable/Repositionable)

Back Knockout Plate

Toggle Clamp

End Cap Concrete Level Leg

Catalog No./Item Description/Specifications

EFB6S 6-Gang Floor Box – has been designed to be installed in concrete floors, raised floors, & wood floor applications. Box has a fully finished interior to assist plugging and unplugging of devices. Designed to work with standard size wall plates.

Included with the box: Protective/Disposable cover, tunnel system for connecting the two modules of compartments, two (2) removable modules, two (2) toggle clamps to secure box to raised and wood floors, two (2) cable management guides, two (2) leveling support legs for concrete applications and trade size knockouts ranging in size from 3/4" to 2" trade size. Box is compatible with Wiremold® Walkerflex Modular Wiring System. Custom options are available upon request.

EFB6S-OG 6-Gang Floor Box – has been designed to be installed in both on-grade and above grade concrete floor applications. Box has an epoxy coating that allows the box to be placed in on-grade applications without the need for additional vapor barriers.

Designed to work with standard size wall plates. Included with the box:

protective/disposable cover, tunnel system for connecting the two modules of compartments, two (2) removable modules, two (2) cable management guides, two (2) leveling support legs for concrete applications and trade size knockouts ranging in size from 3/4" to 1 1/4". Custom options are available upon request.

Evolution Series EFB6 Floor Box Ordering Information

Three (3) KOs:

Outer: 1 1/4" Trade Size KO Inner: 3/4" Trade Size KO

Two (2) KOs:

Outer: 2" Trade Size KO Inner: 1" Trade Size KO

Two (2) KOs:

1" Trade Size KO

Two (2) KOs:

1" Trade Size KO

Four (4) 1" Trade Size KOs

Three (3) KOs:

Outer: 1 1/4" Trade Size KO Inner: 3/4" Trade Size KO

Three (3) KOs:

Outer: 1 1/4" Trade Size KO Inner: 3/4" Trade Size KO

Two (2) KOs:

1" Trade Size KO

Two (2) KOs:

1" Trade Size KO

Six (6) KOs:

1" Trade Size KO

Three (3) KOs:

Outer: 1 1/4" Trade Size KO Inner: 3/4" Trade Size KO

3.7/8" [99mm]

EFB6 Depth Behind Plates

3 7/8" [99mm]

EFB6-OG Depth Behind Plates

NOTE: For use on bare (polished) concrete or terrazzo floors EFB610-CTR must be used. (Sold separately.)

NOTE: For use on bare (polished) concrete or terrazzo floors EFB610-CTR must be used. (Sold separately.)

11 3/16" [284mm]15 1/8"

[384mm]

4 1/16" [103mm]

11 3/16" [284mm]15 1/8"

[384mm]

4 1/16" [103mm]

EFB6S-FC 6-Gang Fire Classified Floor Box – has been designed to be installed in above grade concrete floors while maintaining the fire classification of the floor. This box is classified to be used in 2-hour fire rated floors. Designed to accept standard size wall plates. Included with the box: protective/disposable cover, tunnel system for connecting the two modules of compartments, fire classified pan, two (2) removable modules, four (4) 1 1/4 intumescent conduit feeds and two (2) cable management guides.

Evolution Series EFB6 Floor Box Ordering Information (continued)

NOTE: For use on bare (polished) concrete or terrazzo floors EFB610-CTR must be used. (Sold separately.)

11 3/16" [284mm]15 1/8"

[384mm]

7 1/2" [191mm]

21 3/4" [552mm]17 1/4"

[438mm]

Fire Classified Pan (Insures 3 1/4" [83mm] of concrete around box at all times)

NOTE: Designed for new construction applications.

1 1/4" [35] Intumescent Service Feed (Four (4) per box)

3 7/8" [98mm] Depth Behind Device Plate Outlet Boxes and Fittings Classified for

Fire Resistance Legrand/Wiremold (R8209) Type EFB6S-FC, EFB8S-FC and EFB10S-FC preset electrical insert for use in 2-hour fire rated D900 Series Floor-Ceiling designs constructed with nominal 2" or 3" deep fluted steel floor units having a nominal 5" wide valley and crests spaced 12" OC, with a minimum 3 1/4" [83mm] thickness of structural concrete topping. The assembly preset electrical insert with floor plate kit and service activations fitting will not reduce the 2-hour fire rating of the floor assembly when installed in accordance with the installation instructions accompanying the preset electrical insert and when the preset electrical insert are spaced 2' [0.61m] OC with not more than one unit per 4 square feet [0.37m2] of floor area in each span.

EFB6-11/4 Knockout Plate – Has one (1) 1 1/4" trade size knockout.

EFB6S-TUN Tunnel – 6 gang tunnel allows for cables to be wrapped around box from one module to the other.

EFB6S-DIV Relocatable Divider – Provides separation of services. Includes one (1) divider plate.

EFBCLL Concrete Leveling Legs – Provide floor box adjustment up or down to match the desired pour height of the concrete.

Included two (2) leveling legs, threaded rod not supplied.

EFBCMG Cable Management Guides – Guides help organize and maintain cable position when opening and closing the cover.

Catalog No./Item Description/Specifications

EFB6SM Module – Bank of three (3) compartments that accept power, communications and audio/video devices. Accepts standard size (2 3/4" x 4 1/2" [70mm x 114mm]) device plates. Includes device bracket, back plate, three (3) knockout plates (3/4"/1 1/4" concentric), two (2) end caps and one (1) divider.

EFB6S-MB Mounting Bracket – hold up to three (3) devices of power, communications or audio/video devices. Bracket accepts standard size (2 3/4" x 4 1/2" [70mm x 114mm]) device plates sold separately by others.

EFB-AAP Device Plate – holds 2 Extron® Electronics AAP devices. Device plate dimensions: 2 3/4" x 4 1/2" [69mm x 114mm].

EFB-MAAP Device Plate – holds 4 Extron® Electronics MAAP devices. Device plate dimensions: 2 3/4" x 4 1/2" [69mm x 114mm].

EFB-MOS Device Plate – European device plate acceptes up to [45mm x 67.5mm] Arteor device. Device plate dimensions: 2 3/4" x 4 1/2" [69mm x 114mm].

EFB6-3/4 Knockout Plate – Has one (1) 3/4" trade size knockout.

Evolution Series 6-Gang Floor Box Accessories Ordering Information

NOTE: Module will fit on either side of the floor box.

EFB8S 8-Gang Floor Box – has been designed to be installed in concrete floors, raised floors, & wood floor applications. Box has a fully finished interior to assist plugging and unplugging of devices. Designed to work with standard size wall plates.

Included with the box: protective/disposable cover, tunnel system for connecting the two modules of compartments, two (2) removable modules, two (2) toggle clamps to secure box to raised and wood floors, two (2) cable management guides, two (2) leveling support legs for concrete applications and trade size knockouts ranging in size from 3/4" to 2". Box is compatible with Wiremold® Walkerflex Modular Wiring System. Custom options are available upon request.

EFB8S-OG 8-Gang Floor Box – has been designed to be installed in both on-grade and above grade concrete floor applications. Box has an epoxy coating that allows the box to be placed in on-grade applications without the need for additional vapor barriers.

Designed to work with standard size wall plates. Included with the box: protective/ disposable cover, tunnel system for connecting the two modules of compartments, two (2) removable modules, two (2) cable management guides, two (2) leveling support legs for concrete applications, trade size knockouts ranging in size from 3/4" to 2". Custom options are available upon request.

Evolution Series EFB8 Floor Box Ordering Information

Each Side:

Outer: 1 1/4" Trade Size KO Inner: 3/4" Trade Size KO

Two (2) KOs:

1" Trade Size KO

Two (2) KOs:

1 1/4" Trade Size KO Eight (8) KOs:

1" Trade Size KO

Each Side:

2" Trade Size KO

3 1/2" [89mm]

EFB8 Depth Behind Plates Each Side:

3/4" Trade Size KO

Each Side:

Outer: 2" Trade Size KO Inner: 1" Trade Size KO

Two (2) KOs:

1 1/4" Trade Size KO

Two (2) KOs:

1 1/4" Trade Size KO

Eight (8) KOs:

1" Trade Size KO

Each Side:

1 1/4" Trade Size KO

3 1/2" [89mm]

EFB8-OG Depth Behind Plates

Each Side:

Outer: 2" Trade Size KO Inner: 1" Trade Size KO

NOTE: For use on bare (polished) concrete or terrazzo floors EFB610-CTR must be used. (Sold separately.)

NOTE: For use on bare (polished) concrete or terrazzo floors EFB610-CTR must be used. (Sold separately.)

11 3/16" [284mm]15 1/8"

[384mm]

6" [152mm]

11 3/16" [284mm]15 1/8"

[384mm]

6" [152mm]

EFB8S-22GMB Mounting Bracket – Equipped with two (2) 2-gang standard size device openings for a standard 2-gang (4 9/16" x 4 1/2" [116mm x 114mm]). Ideal for 2-gang A/V devices such as Crestron® 2-gang digital media devices. Device plates and devices supplied by others.

EFB8S-23GMB Mounting Bracket – Equipped with one 2-gang standard size device opening and one 3-gang standard size device opening.

Accepts a standard 2-gang (4 9/16" x 4 1/2" [116mm x 114mm]) and a 3-gang (6 3/8" x 4 1/2" [162mm x 114mm]) device plate. Ideal for 2-gang A/V devices such as Crestron® 2-gang and 3-gang digital media devices.

Device plates and devices supplied by others.

Catalog No./Item Description/Specifications

EFB8SM Module – Bank of four (4) compartments that accept power, communications and audio/video devices. Accepts standard size (2 3/4" x 4 1/2") [70mm x 114mm] device plates. Includes one device bracket, one back plate, two (2) knockout plates, two (2) end caps and one divider.

EFB8S-MB Mounting Bracket – holds up to four (4) devices for power, communications or audio/video.

Bracket accepts standard size (2 3/4" x 4 1/2" [70mm x 114mm]) device plates sold separately by others.

Catalog No./Item Description/Specifications

EFB8S-FC 8-Gang Fire Classified Floor Box – has been designed to be installed in above grade concrete floors while maintaining the fire classification of the floor. This box is classified for use in 2-hour fire rated floors. Designed to work with standard size wall plates. Included with the box: protective/disposable cover, tunnel system for connecting the two modules of compartments, fire classified pan, two (2) removable modules, four (4) 1 1/4 intumescent conduit feeds and two (2) cable management guides.

Evolution Series EFB8 Floor Box Ordering Information (continued)

NOTE: For use on bare (polished) concrete or terrazzo floors EFB610-CTR must be used. (Sold separately.)

11 3/16" [284mm]15 1/8"

[384mm]

7 1/2" [191mm]

21 3/4" [552mm]17 1/4"

[438mm]

Fire Classified Pan (Insures 3 1/4" [83mm] of concrete around box at all times)

1 1/4" [35] Intumescent Service Feed (Four (4) per box)

3 1/2" [89mm] Depth Behind Device Plate

Outlet Boxes and Fittings Classified for Fire Resistance Legrand/Wiremold (R8209) Type EFB6S-FC, EFB8S-FC and EFB10S-FC preset electrical insert for use in 2-hour fire rated D900 Series Floor-Ceiling designs constructed with nominal 2" or 3" deep fluted steel floor units having a nominal 5" wide valley and crests spaced 12" OC, with a minimum 3 1/4" [83mm] thickness of structural concrete topping. The assembly preset electrical insert with floor plate kit and service activations fitting will not reduce the 2-hour fire rating of the floor assembly when installed in accordance with the installation instructions accompanying the preset electrical insert and when the preset electrical insert are spaced 2' [0.61m] OC with not more than one unit per 4 square feet [0.37m2] of floor area in each span.

Evolution Series 8-Gang Floor Box Accessories Ordering Information

NOTE: Module will fit on either side of the floor box.

EFB810S-TUN Tunnel – For EFB8 Series and EFB10 Series boxes. Tunnel allows cables to be wrapped around box from one module to the other.

EFB8S-DIV Relocatable Divider – Provides separation of services. Includes one divider plate.

EFBCLL Concrete Leveling Legs – Legs allow floor box to be adjusted up or down to match the desired pour height of the concrete.

Includes two (2) leveling legs.

Threaded rod not supplied.

EFBCMG Cable Management Guides – Guides help organize and maintain cable position when opening and closing the cover.

EFBS-50A 50A Adapter – Allows for a 50A device to be installed on the 8-gang and 10-gang series boxes.

Catalog No./Item Description/Specifications

EFB-AAP Device Plate – holds two (2) Extron® Electronics AAP devices.

Device plate dimensions: 2 3/4" x 4 1/2" [69mm x 114mm].

EFB-MAAP Device Plate – holds four (4) Extron® Electronics MAAP devices.

Device plate dimensions: 2 3/4" x 4 1/2" [69mm x 114mm].

EFB-MOS Device Plate – European device plate acceptes up to [45mm x 67.5mm] Arteor device. Device plate dimensions: 2 3/4" x 4 1/2" [69mm x 114mm].

EFB810-3/4-3/4 Knockout Plate – Has two (2) 3/4" trade size knockouts.

EFB810-3/4-11/4 Knockout Plate – Has one 3/4" and one 3/4"/1 1/4" concentric trade size knockout.

EFB810-2 Knockout Plate – Has one 2" trade size knockout.

Evolution Series 8-Gang Floor Box Accessories Ordering Information

NOTE: Only fits on othe side of the floor box where the device is facing the tunnel.

50A Device

Tunnel

EFB10S 10-Gang Floor Box – has been designed to be installed in concrete floors, raised floors, & wood floor applications. Box has a fully finished interior to assist plugging and unplugging of devices. Included with the box: protective/disposable cover, tunnel system for connecting the two modules of compartments, two (2) removable modules, two (2) toggle clamps to secure box to raised and wood floors, two (2) cable management guides, two (2) leveling support legs for concrete applications, trade size knockouts ranging in size from 3/4" to 2". Box is compatible with Wiremold® Walkerflex Modular Wiring System. Custom options are available upon request.

EFB10S-OG 10-Gang Floor Box – has been designed to be installed in both on-grade and above grade concrete floor applications. Box has an epoxy coating that allows the box to be placed in on-grade applications without the need for additional vapor barriers.

Included with the box: protective/disposable cover, tunnel system for connecting the two modules of compartments, two (2) removable modules, two (2) cable management guides, two (2) leveling support legs for concrete applications and trade size knockouts ranging in size from 3/4" to 1 1/4". Custom options are available upon request.

Evolution Series EFB10 Floor Box Ordering Information

Each Side:

Outer: 1 1/4" Trade Size KO Inner: 3/4" Trade Size KO

Two (2) KOs:

1 1/4" Trade Size KO

Two (2) KOs:

1 1/4" Trade Size KO

Ten (10) KOs:

1" Trade Size KO

Each Side:

1 1/4" Trade Size KO

3 1/2" [89mm]

EFB10 Depth Behind Plates

Each Side:

3/4" Trade Size KO

Each Side:

2" Trade Size KO

3 1/2" [89mm]

EFB10 Depth Behind Plates

Each Side:

Outer: 2" Trade Size KO Inner: 1" Trade Size KO

Two (2) KOs:

1 1/4" Trade Size KO

Two (2) KOs:

1 1/4" Trade Size KO

Ten (10) KOs:

1" Trade Size KO

Each Side:

1 1/4" Trade Size KO

Each Side:

Outer: 2" Trade Size KO Inner: 1" Trade Size KO

NOTE: For use on bare (polished) concrete or terrazzo floors EFB610-CTR must be used. (Sold separately.)

NOTE: For use on bare (polished) concrete or terrazzo floors EFB610-CTR must be used. (Sold separately.)

11 3/16" [284mm]15 1/8"

[384mm]

6" [152mm]

11 3/16" [284mm]15 1/8"

[384mm]

6" [152mm] bwombold Highlight

EFB10S-FC 10-Gang Fire Classified Floor Box – has been designed to be installed in above grade concrete floors while maintaining the fire classification of the floor. This box is classified for use in 2-hour fire rated floors. Included with the box: protective/ disposable cover, tunnel system for connecting the two modules of compartments, fire classified pan, two (2) removable modules, four (4) 1 1/4" trade size intumescent conduit feeds and two (2) cable management guides.

Evolution Series EFB10 Floor Box Ordering Information (continued)

NOTE: For use on bare (polished) concrete or terrazzo floors EFB610-CTR must be used. (Sold separately.)

11 3/16" [284mm]15 1/8"

[384mm]

7 1/2" [191mm]

21 3/4" [552mm]17 1/4"

[438mm]

Fire Classified Pan (Insures 3 1/4" [83mm] of concrete around box at all times)

1 1/4" [35] Intumescent Service Feed (Four (4) per box)

3 1/2" [89mm] Depth Behind Device Plate

Outlet Boxes and Fittings Classified for Fire Resistance Legrand/Wiremold (R8209) Type EFB6S-FC, EFB8S-FC and EFB10S-FC preset electrical insert for use in 2-hour fire rated D900 Series Floor-Ceiling designs constructed with nominal 2" or 3" deep fluted steel floor units having a nominal 5" wide valley and crests spaced 12" OC, with a minimum 3 1/4" [83mm] thickness of structural concrete topping. The assembly preset electrical insert with floor plate kit and service activations fitting will not reduce the 2-hour fire rating of the floor assembly when installed in accordance with the installation instructions accompanying the preset electrical insert and when the preset electrical insert are spaced 2' [0.61m] OC with not more than one unit per 4 square feet [0.37m2] of floor area in each span.

Catalog No./Item Description/Specifications

EFB10SM Module – Bank of five (5) compartments that accept power, communications and audio/video devices. Accepts EFB10 Series device plates (2 1/32" x 4 5/8") [58mm x 117mm]. Includes one mounting bracket, one back plate, one divider, two (2) end caps and two (2) knockout plates. Device plates sold separately.

EFB10S-MB Mounting Bracket – hold up to five (5) devices for power, communications or audio/video.

Bracket accepts EFB10 Series device plates (2 1/32" x 4 5/8") [58mm x 117mm] device plates sold separately.

Catalog No./Item Description/Specifications

EFB10-B Device Plate – Blank device plate. Device plate dimensions: 2.3" x 4.652" [58mm x 118mm].

EFB10-DP Device Plate – Duplex device plate. Device plate dimensions: 2.3" x 4.652" [58mm x 118mm].

EFB10-DEC Device Plate – Decorator style device plate. For use with decorator style receptacles, GFCI receptacle, and decorator style audio/video devices. Device plate dimensions: 2.3" x 4.652" [58mm x 118mm].

Evolution Series 10-Gang Floor Box Accessories Ordering Information

NOTE: Module will fit on either side of the floor box.

bwombold Highlight bwombold Highlight

EFB10-MAAP Device Plate – holds four (4) Extron® Electronics MAAP devices.

Device plate dimensions: 2.3" x 4.652" [58mm x 118mm].

EFB10-MOS Device Plate – [45mm x 67.5mm] device plate. Device plate dimensions: 2.3" x 4.652" [58mm x 118mm].

EFB810-3/4-3/4 Knockout Plate – Has two (2) 3/4" trade size knockouts.

EFB810-3/4-11/4 Knockout Plate – Has one 3/4" and one 3/4"/1 1/4" concentric trade size knockout.

EFB810-2 Knockout Plate – Has one 2" trade size knockout.

EFB810S-TUN Tunnel – For EFB8 Series and EFB10 Series boxes. Tunnel allows cables to be wrapped around box from one module to the other.

Catalog No./Item Description/Specifications

EFB10-S1 Knockout Plate – Single receptacle 1.39" [35mm].

diameter. Device plate dimensions: 2.3" x 4.652" [58mm x 118mm].

EFB10-S2 Knockout Plate – Single receptacle 1.59" [40mm].

diameter. Device plate dimensions: 2.3" x 4.652" [58mm x 118mm].

EFB10-6AB Device Plate – Accepts up to three (3) dual Wiremold Open System communication adapters.

Adapters sold separately. Device plate dimensions: 2.3" x 4.652" [58mm x 118mm].

EFB10-3S2 Device Plate – Accepts up to three (3) Ortronics® Series II devices. Ortronics® devices sold separately. Device plate dimensions: 2.3" x 4.652" [58mm x 118mm].

EFB10-2C Device Plate – Accepts one dual Wiremold Open System adapter, or one Ortronics® Series II adapter, or one Ortronics®

TracJack adapter. Adapters sold separately. Device plate dimensions: 2.3" x 4.652" [58mm x 118mm].

EFB10-AAP Device Plate – holds two (2) Extron® Electronics AAP devices.

Device plate dimensions: 2.3" x 4.652" [58mm x 118mm].

Evolution Series 10 Gang Floor Box Accessories Ordering Information

EFBCMG Cable Management Guides – Guides help organize and maintain cable position when opening and closing the cover.

EFBS-50A 50A Adapter – Allows for a 50A device to be installed on the 8 gang and 10 gang series boxes.

Catalog No./Item Description/Specifications

EFB10S-DIV Relocatable Divider – Provides separation of services. Includes one divider plate.

EFBCLL Concrete Leveling Legs – Legs allow floor box to be adjusted up or down to match the desired pour height of the concrete.

Includes two (2) leveling legs.

Threaded rod not supplied.

Evolution Series 10 Gang Floor Box Accessories Ordering Information

NOTE: Only fits on othe side of the floor box where the device is facing the tunnel.

50A Device

Tunnel

EFB610BTBK Flush Style Cover with EFB610BTGY Solid Lid – Die cast aluminum EFB610BTBS cover assembly designed to be EFB610BTNK used on top of floor covering.

EFB610BTBZ Available in the following powder coated finishes: black (BK), gray (GY), brass (BS), nickel (NK) and bronze (BZ). For use on Evolution Series 6-, 8- and 10-gang floor boxes (EFB6, EFB8 and EFB10).

EFB610CTR Bare Concrete/Terrazzo Trim Ring – Nonmetallic ring for use with bare concrete and terrazzo floor applications.

EFB610-TS Tile Shim – Used for floor coverings greater than 3/16" [4.7mm]. The EFB610-TS allows the finished cover assembly to be flush with the finished floor.

Includes one (1) 1/16" [1.6mm], one (1) 1/8" [3.2mm] and one 1/4" [6.4mm] tile shims for 9/16" [14.3mm] of upward adjustment.

Catalog No./Item Description/Specifications

EFB610CTCBK Surface Style Cover with EFB610CTCGY Carpet Insert – Die cast aluminum EFB610CTCBS cover assembly designed to be EFB610CTCNK used on top of the floor covering.

EFB610CTCBZ Available in the following powder coated finishes: black (BK), gray (GY), brass (BS), nickel (NK) and bronze (BZ). For use on Evolution Series 6-, 8- and 10-gang floor boxes (EFB6, EFB8 and EFB10).

EFB610CTBK Flush Style Cover with EFB610CTGY Carpet Insert – Die cast aluminum EFB610CTBS cover assembly designed to be EFB610CTNK used level (flush) with finish floor EFB610CTBZ covering. Available in the following powder coated finishes: black (BK), gray (GY), brass (BS), nickel (NK) and bronze (BZ). For use on Evolution Series 6-, 8- and 10-gang floor boxes (EFB6, EFB8 and EFB10).

EFB610BTCBK Surface Style Cover with EFB610BTCGY Solid Lid – Die cast aluminum EFB610BTCBS cover assembly designed to be EFB610BTCNK used on top of floor covering.

EFB610BTCBZ Available in the following powder coated finishes: black (BK), gray (GY), brass (BS), nickel (NK) and bronze (BZ). For use on Evolution Series 6-, 8- and 10-gang floor boxes (EFB6, EFB8 and EFB10).

Evolution Series Floor Box Accessories Ordering Information

NOTE: Depth of recess area in plate is 1/4" [6.35mm].

NOTE: Depth of recess area in plate is 1/4" [6.35mm].

16 3/8" [416mm] 12 1/2"

[318mm]

16 3/8" [416mm] 12 1/2"

[318mm]

16 3/8" [416mm] 12 1/2"

[318mm]

16 3/8" [416mm] 12 1/2"

[318mm]

16 3/8" [416mm]

12 1/2" [318mm]

Evolution Series Floor Box Covers are available in powder coated finishes of: (L to R) gray, nickel, bronze, brass and black.

CATALOG MAXIMUM LOAD

NUMBERS IN POUNDS

EFB610BTC Series 1800 EFB610CTC Series 1800

EFB610BT Series 1800

EFB610CT Series 1800

Load Capacities for Evolution Series Floor Box Cover Assemblies

NOTE: Load applied through a 3" [76mm] mandrel in center of the cover.

Loads above are static loads only and do not pertain to rolling loads.

EFBFF Furniture Feed Floor Box Assembly – For carpet, tile and wood covered floors.

For use in concrete, raised and wood floor applications. Box is provided with a protective, disposable cover that allows the box to be installed at any point in the construction process. Box is available in a standard version for use in above grade concrete, raised, and wood floor applications. Boxes are also compatible with Wiremold® Walkerflex Modular Wiring System. Custom options are available upon request.

EFBFF-OG Furniture Feed Floor Box Assembly – For carpet, tile and wood covered floors. For use in on-grade and above grade concrete floor applications. Box is provided with a protective, disposable cover that allows the box to be installed at any point in the construction process. Box is available with an epoxy coating for on-grade applications. Custom options are available upon request.

EFBFF-DIV Divider – Provides separation of services.

FPFFTCBK Furniture Feed Cover Assembly – Flanged cover for use in tile or carpet or wood FPFFTCBZ floor installations. Die-cast aluminum assembly available in powder coat finishes of FPFFTCBS black (BK), bronze (BZ), brass (BS), nickel (NK), gray (GY), or brushed aluminum (AL).

FPFFTCGY Provided with one 1" trade size screw plug for power or communication type cabling FPFFTCNK and one combination 1 1/4" and 2" trade size screw plug for communication and FPFFTCAL A/V type cabling. Allows for feeding both power and communication cabling.

Evolution Series EFBFF Furniture Feed Floor Box Ordering Information

Outer: 1 1/2" Trade Size KO Inner: 1" Trade Size KO

Two (2) KOs:

Outer: 2" Trade Size KO Inner: 1/2" Trade Size KO

Two (2) KOs:

Outer: 1 1/4" Trade Size KO Inner: 1/2" Trade Size KO

Each Side, Two KOs:

Outer: 3/4" Trade Size KO Inner: 1/4" Trade Size KO

Outer: 1 1/2" Trade Size KO Inner: 1" Trade Size KO

NOTE: Not designed for use with bare concrete or terrazzo floors.

NOTE: Not designed for use with bare concrete or terrazzo floors.

Two (2) KOs:

Outer: 1 1/4" Trade Size KO Inner: 1/2" Trade Size KO

Two (2) KOs:

Outer: 2" Trade Size KO Inner: 1/2" Trade Size KO

Each Side, Two KOs:

Outer: 3/4" Trade Size KO Inner: 1/4" Trade Size KO

7 1/16" [179mm]

6 5/8" [168mm]

4 1/8" [105mm]

7 1/16" [179mm]

6 5/8" [168mm]

4 1/8" [105mm]

7 3/4" [197mm]

6 1/2" [165mm]

NOTE: Flangeless FloorPort Series (FPFFT) covers are not designed to work with Evolution Series Furniture Feed Floor Boxes.

WIREMOLD

U.S. and International:

60 Woodlawn Street • West Hartford, CT 06110 1-800-621-0049 • FAX 860-232-2062 • Outside U.S. 860-233-6251 Canada:

570 Applewood Crescent • Vaughan, Ontario L4K 4B4

1-800-723-5175 • FAX 905-738-9721

ED1662R1 - Updated August 2011 - For latest specs visit www.legrand.us/wiremold© Copyright 2011 Legrand All Rights Reserved

N O T E S