6991PE24Q000013 RFQ ATTACH-SOW Specs SBRF Shore Power Cables FY24.pdf
PDF 119 KB Posted
- Solicitation number
- 6991PE24Q000013
About this file
This document is a Request for Quotation (RFQ) for Shore Power Cables for the U.S. Maritime Administration's Suisun Bay Reserve Fleet (SBRF) for Fiscal Year 2024. The contractor will be required to provide the following: 3,000 feet of 2 AWG 3/C 15KV type MP-GC power cable, 500 feet of the same 2 AWG 3/C 15KV type cable, three 700-foot lengths of 4/0 Cu MV-105, 15kV, EPR/PVC Power Cable, and one 700-foot length of 2 AWG bare Cu cable. All cables must meet specific technical requirements outlined in the Statement of Work/Specifications. Proposals are due by 5pm PST on 8/23/2024, with a cut-off for questions on 8/20/2024. The primary Contracting Officer Representative is Luis A. Martinez Jr. Vendors must be registered in SAM.gov to be considered for award.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| 6991PE24Q000013 RFQ ATTACH-Contractor Past Performance Experience Sheet.docx | DOCX document | |
| 6991PE24Q000013 RFQ SF1449 Form-SBRF Shore Power Cables FY24.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
BILL OF MATERIALS/STATEMENT OF WORK/SPECIFICATIONS
SUISUN BAY RESERVE FLEET (SBRF) SHORE POWER CABLES
FY2024
1. Provide 3,000 feet of 2 AWG 3/C 15KV type MP-GC power cable with class B copper conductors, Ethylene Propylene Rubber (EPR) 133% insulation level, copper tape shield, with ground and ground check, and mold cured Chlorinated Polyethylene (CPE) jacket (jacket color Orange).
Cable must be MSHA approved and meet the following specifications:
• ASTM B3 Soft or Annealed Copper Wire
• ASTM B8 Concentric-Lay-Stranded Copper Conductors
• ICEA S-75-381/NEMA WC 58 Portable and Power Feeder Cables for use in
Mines and Similar Applications
Prior to receiving a notice to proceed, provide the cable manufacturer’s catalog data and drawing for the cable being offered, for acceptance.
Cable is to be tested in accordance with ICEA S-75-381 section 4.10 and applicable sections of section 6. Provide the manufacturer’s test reports and a certificate of cable testing after the electrical cable is manufactured. The electrical cable will be shipped after acceptance of the testing results.
Cable is intended to be used for underwater service in shallow water (max 36-foot depth).
Cable to be provided as one continuous length on one spool, with an acceptable length variance of +/-2%.
2. Provide 500 feet of 2 AWG 3/C 15KV type MP-GC power cable with class B copper conductors, Ethylene Propylene Rubber (EPR) 133% insulation level, copper tape shield, with ground and ground check, and mold cured Chlorinated Polyethylene (CPE) jacket (jacket color Orange).
Cable must be MSHA approved and meet the following specifications:
• ASTM B3 Soft or Annealed Copper Wire
• ASTM B8 Concentric-Lay-Stranded Copper Conductors
• ICEA S-75-381/NEMA WC 58 Portable and Power Feeder Cables for use in
Mines and Similar Applications
Prior to receiving a notice to proceed, provide the cable manufacturer’s catalog data and drawing for the cable being offered, for acceptance.
Cable is to be tested in accordance with ICEA S-75-381 section 4.10 and applicable sections of section 6. Provide the manufacturer’s test reports and a certificate of cable testing after the electrical cable is manufactured. The electrical cable will be shipped after acceptance of the testing results.
Cable is intended to be used for underwater service in shallow water (max 36-foot depth).
Cable to be provided as one continuous length on one spool, with an acceptable length variance of +/-2%.
3. Provide three (3) each 700-foot lengths of 4/0 Cu MV-105, 15kV, EPR/PVC Power Cable w/ Copper Tape Shield.
Shall be on 3 individual spools 700 feet on each spool.
USDDOT MARAD SBRF requires copper 4/0 conductors. Prior to receiving a notice to proceed, provide the cable manufacturer’s catalog data and drawing for the cable being offered for acceptance.
Each of the three 700-foot continuous cable lengths shall have a variance of +/-2% (+/-14 feet).
4. Provide one (1) each 700-foot length of 2 AWG bare Cu on a spool. Prior to receiving a notice to proceed, provide the cable manufacturer’s catalog data and drawing for the cable being offered for acceptance.
Cable to be provided as one continuous length on one spool, with an acceptable length variance of +/-2% (+/-14 feet)
Deliver to:
US DOT Maritime Administration Suisun Bay Reserve Fleet 2595 Lake Herman Road Benicia, CA 94510
Primary COR POC: Luis A. Martinez Jr., Email: luis.martinez@dot.gov, Ph: (707) 747-7803 Alternate Contracting Officer Representative(s): joe.pecoraro@dot.gov, Ph: (707)747-7801 and justin.legendre@dot.gov, Ph: (707) 747-7802 mailto:luis.martinez@dot.gov mailto:joe.pecoraro@dot.gov mailto:justin.legendre@dot.gov
BILL OF MATERIALS/STATEMENT OF WORK/SPECIFICATIONS
File details come from the government source that posted it. Updated .