Attachment 3 IAH drawings.pdf

This document is a set of technical drawings and specifications for runway and taxiway construction at George Bush Intercontinental Airport (IAH) in Houston, Texas, issued by the Federal Aviation Administration (FAA) under the Department of Transportation.

The project involves construction of access roads for the 8R Midfield Runway Visitor Route (RVR) and 15L Runway Visitor Route (RVR), designated as FA-19200 PC Based RVR System. The drawings include a general plan layout, construction safety and phasing plan, detailed taxiway cross-sections, gravel road cross-sections, and runway access road details. Key specifications address contractor obligations for airport operations coordination, safety procedures during active runway operations, temporary closure requirements, equipment staging areas, utility management, and phasing of work to minimize interference with existing FAA facilities and airport infrastructure. The technical drawings show elevation markers, runway dimensions, existing structures including fire stations, hangars, terminals, and bridges, with coordinate references and access points clearly marked. Construction requirements include provisions for drainage, erosion control, temporary closures with proper signage, and compliance with airport operational procedures. The contractor must coordinate all activities with airport operations and obtain FAA approval for any work affecting air traffic control systems or runway operations.