market survey_RDG.pdf

Design-Build (D/B) of the RDG ATCT project at Reading, PA Market Survey (MS) 1/30/25

1. Introduction/Purpose:

The FAA has a potential upcoming requirement for the Design-Build (D/B) of a new RDG ATCT (Air Traffic Control Tower), in Reading, PA. The FAA is seeking interested sources that are capable of completing this requirement within the estimated cost range of $50,000,000.00 - $75,000,000.00 range, in accordance with the attached Statement of Work (SOW). This market survey is being conducted in accordance with FAA Acquisition Management System (AMS) Policy section 3.2.1.2.1 Market Analysis.

2. Nature of Competition:

The acquisition strategy for the procurement has not yet been determined at this time; but may be chosen based on market research and responses to this market survey.

3. Disclaimer:

(a) This is not a Screening Information Request or Request for Proposals of any kind.

(b) The FAA is not seeking nor accepting unsolicited proposals.

(c) The FAA will not pay for any information received or costs incurred in preparing the response to the market survey.

(d) Any costs associated with the market survey submittal is solely at the interested vendor’s expense.

(e) Any attachments referenced to in the SOW are not available for this MS, any referenced attachments would be made available in any subsequent Solicitation.

4. North American Industry Classification System (NAICS) Code:

The NAICS code projected for the procurement is 236220 – Building Construction

5. Submittal Requirements for Market Survey:

Interested sources must respond with information to confirm evidence of their qualifications and capabilities to meet the requirements as outlined in the attached requirements document.

Response must include the following information:

1. Name of Company (the resultant Prime Contractor that may ultimately be awarded any subsequent contract).

2. Address.

3. Point of contact name, e-mail address and telephone number.

4. Business size status: 8(a) Certified, Large Business, Small Business, SDB, SDVOSB, etc.

5. UEI Number.

6. Any relevant experience on Tower and/or vertical construction projects of similar size and complexity, valued at a minimum of $1,00,000.00, and performed at similar critical facilities (i.e. FAA Air Traffic facilities, hospitals, and data centers, etc.), within the past ten (10) years. (the listed relevant experience MUST describe all this information in order to be reviewed)

7. Number of years in business.

8. Completed Business Declaration form.

9. Current available Bonding available, and name of Bonding Company.

9. Statement from offerer that if ultimately awarded this requirement, that you can and will meet all parameters described in this Market Survey.

***All responses are to be provided on company letterhead (10 pages or less). ANY QUESTIONS MUST BE RECEIVED NO LATER THAN 5:00PM (ET) 2/6/25 TO ALLOW ADEQUATDE TIME FOR RESPONSE. (NO

PHONE CALLS. ALL QUESTIONS MUST BE IN WRITING AND EMAILED TO THE CONTRACTING

OFFICER.)

6. Delivery of Submittals:

Submittals to this Market Survey must be e-mailed to Robert Higgins (Contracting Officer) at robert.higgins@faa.gov no later than 5:00PM (ET) 2/13/25.

mailto:robert.higgins@faa.gov

7. SAM Registration:

An active registration in the System for Award Management (SAM) must be obtained to be considered for government contracts with the FAA.

8. Scope of Work:

a. See attached RDG_SOW, dated 1/30/25.

b. Business Declaration form.

9. Reference Drawings: Not applicable at this time.