AMENDMENT 1 IDAHO FALLS POWER CONTRACTOR MAP.PDF

M

M

P

IDAHO FALLS POWER MUST INSPECT

ALL TRENCHES PRIOR TO BACKFILL.

CONTACT IDAHO FALLS POWER,

GRANT CAMPBELL 220-0486

GENERAL CONSTRUCTION AND ELECTRICAL NOTES:

1. CENTERLINE OF POWER TRENCH AS NOTED ON PLAN.

2. MINIMUM DEPTH OF ALL PRIMARY POWER TRENCHES SHALL BE 54" BELOW FINISHED

GRADE W/ 6" OF SAND BEDDING BELOW AND ABOVE TOP OF CONDUIT. MINIMUM DEPTH OF

ALL SECONDARY AND FIBER OPTIC TRENCHES SHALL BE 30" BELOW FINISHED GRADE.

PRIMARY, SECONDARY, AND FIBER OPTIC CONDUIT DEPTHS CAN BE REDUCED TO 18" OF

COVER BELOW FINISHED GRADE, BUT RIGID GALVANIZED STEEL CONDUIT AND ELBOWS

MUST BE PROVIDED AND INSTALLED BY THE DEVELOPER/CONTRACTOR WHERE THE

TRENCH DEPTH IS LESS THAN 48" DEEP.

3. TRENCH WIDTH SHALL BE 5.0' UNLESS OTHERWISE NOTED. BOTTOM OF TRENCHES

MUST BE LEVEL FOR CONDUIT INSTALLATION.

4. BACK-FILL AND COMPACT ALL TRENCHES TO A MINIMUM OF 95% OF MAXIMUM DENSITY.

5. ALL PRIMARY, SECONDARY, STREET LIGHT, AND FIBER OPTIC CONDUITS INCLUDING

ELBOWS AND FITTINGS SHALL BE SUPPLIED AND INSTALLED BY THE

DEVELOPER/CONTRACTOR UNLESS OTHERWISE NOTED. ALL ELECTRICAL AND FIBER

CONDUIT SHALL BE SCHEDULE 40 PVC. ALL ELBOWS SHALL BE 36" RADIUS SCHEDULE 40

PVC UNLESS OTHERWISE NOTED.

6. THE DEVELOPER/ENGINEER SHALL PROVIDE STAKING AND LAYOUT OF NEW ELECTRICAL

AND FIBER OPTIC FACILITIES.

7. ALL LOT CORNERS ADJACENT TO ALL POWER TRENCHES MUST BE CLEARLY MARKED

FOR INSTALLATION OF ELECTRICAL FACILITIES.

8. THE CONTRACTOR SHALL RETAIN AND PROTECT ALL EXISTING ELECTRICAL AND FIBER

OPTIC FACILITIES DURING CONSTRUCTION. ALSO, REPAIR/REPLACE ALL CONCRETE,

ASPHALT, AND LANDSCAPING THAT IS DISTURBED DURING CONSTRUCTION.

9. ALL NEW ELECTRICAL FACILITIES AND FIBER OPTICS FACILITIES SHALL BE

CONSTRUCTED IN ACCORDANCE WITH THE CURRENT IDAHO FALLS POWER SERVICE

POLICY. COORDINATE WITH IDAHO FALLS POWER.

10. ELECTRICAL SECTIONALIZING CABINETS, SECONDARY BOXES, FIBER BOXES

TRANSFORMER BASES, ETC.(WHEN REQUIRED) WILL BE PROVIDED BY IDAHO FALLS

POWER BUT SHALL BE INSTALLED BY THE DEVELOPER/CONTRACTOR.

11. OWNER SHALL BEAR ALL COSTS TO RELOCATE OR REMOVE EXISTING POWER POLES,

LIGHT POLES, ANCHOR GUYS, AND MISCELLANEOUS ELECTRICAL FACILITIES UNLESS

OTHERWISE NOTED.

12. ALL TRENCHES AND CONDUITS (INCLUDING ROAD CROSSINGS) MUST BE INSPECTED BY

IDAHO FALLS POWER PRIOR TO BACK -FILLING. IDAHO FALLS POWER WILL PROVIDE

GROUND RODS AND CONTRACTOR WILL INSTALL GROUND RODS PRIOR TO INSTALLATION

OF CONDUIT.

13. CONTRACTOR/DEVELOPER TO INSTALL A PULL STRING THROUGH EACH RUN OF FIBER

OPTIC CONDUIT.

14. ALL PRIMARY CONDUIT MUST HAVE A MINIMUM OF ONE (1) FOOT SEPARATION

BETWEEN OTHER CONDUITS IN TRENCH.

15. OWNER/DEVELOPER SHALL PROVIDE ALL TRENCHING, CONDUIT AND CONCRETE LIGHT

POLE FOUNDATIONS FOR STREET ILLUMINATION ALONG ALL PUBLIC RIGHT OF WAYS AS

PER IDAHO FALLS POWER SERVICE POLICY. ADDITION TO, OWNER/DEVLEOPER SHALL

PURCHASE STREET LIGHT ASSEMBLY PROVIDED AND INSTALLED BY IDAHO FALLS POWER.

CITY OF IDAHO FALLS, IDAHO

Date:

Designed By:

CadFile:

140 South Capital Ave.

PO Box 50220

Idaho Falls, ID 83405-0220

Telephone: 208-612-8430

Scale:

Reviewed By:

Work Request No.

Sheet:

REVISION:

REVISION:

REVISION:

REVISION:

GENERAL LAYOUT AND CONSTRUCTION MAP

IDAHO FALLS AIRPORT - ADDITIONAL LIGHTING 2018

T, 2 N., R 37 E., B.M., SECTION 15, Plate 1

1"=50'

6/22/2018

G.C.

Electrical Design - Airport New Lighting 2018

CONTRACTOR'S MAP

J.R./J.M.

30934 1 of 1

N

1 " = 50'

25 10050

LEGEND (NEW CONSTRUCTION)

EXISTING 2" SCHEDULE 40 PVC CONDUIT (FIBER)

INSTALL 2" SCHEDULE 40 PVC CONDUIT (FIBER)

EXISTING 2" SCHEDULE 40 PVC CONDUIT

INSTALL 2" SCHEDULE 40 PVC CONDUIT

EXISTING 2-1/2" SCHEDULE 40 PVC CONDUIT

INSTALL 2-1/2" SCHEDULE 40 PVC CONDUIT

EXISTING 3" SCHEDULE 40 PVC CONDUIT

INSTALL 3" SCHEDULE 40 PVC CONDUIT

EXISTING 4" SCHEDULE 40 PVC CONDUIT

INSTALL 4" SCHEDULE 40 PVC CONDUIT

INSTALL SINGLE PHASE A PRIMARY OVER-HEAD CONDUCTOR

EXISTING SINGLE PHASE A PRIMARY OVER-HEAD CONDUCTOR

INSTALL SINGLE PHASE A PRIMARY UNDERGROUND CONDUCTOR IN 2-1/2" SCHEDULE 40 PVC CONDUIT

EXISTING SINGLE PHASE A PRIMARY UNDERGROUND CONDUCTOR

INSTALL SINGLE PHASE B PRIMARY OVER-HEAD CONDUCTOR

EXISTING SINGLE PHASE B PRIMARY OVER-HEAD CONDUCTOR

INSTALL SINGLE PHASE B PRIMARY UNDERGROUND CONDUCTOR IN 2-1/2" SCHEDULE 40 PVC CONDUIT

EXISTING SINGLE PHASE B PRIMARY UNDERGROUND CONDUCTOR

INSTALL SINGLE PHASE C PRIMARY OVER-HEAD CONDUCTOR

EXISTING SINGLE PHASE C PRIMARY OVER-HEAD CONDUCTOR

INSTALL SINGLE PHASE C PRIMARY UNDERGROUND CONDUCTOR IN 2-1/2" SCHEDULE 40 PVC CONDUIT

EXISTING SINGLE PHASE C PRIMARY UNDERGROUND CONDUCTOR

EXISTING IDAHO FALLS FIBER OPTIC LINE

INSTALL IDAHO FALLS FIBER OPTIC LINE IN 2" SCHEDULE 40 PVC CONDUIT

INSTALL THREE PHASE PRIMARY OVER-HEAD CONDUCTOR

INSTALL THREE PHASE PRIMARY UNDERGROUND CONDUCTOR IN 4" SCHEDULE 40 PVC CONDUIT

EXISTING THREE PHASE PRIMARY OVER-HEAD CONDUCTOR

EXISTING THREE PHASE PRIMARY UNDERGROUND CONDUCTOR

INSTALL SECONDARY OVER-HEAD CONDUCTOR

EXISTING SECONDARY OVER-HEAD CONDUCTOR

INSTALL SECONDARY UNDERGROUND CONDUCTOR

EXISTING SECONDARY UNDERGROUND CONDUCTOR

EXISTING PARCEL LINE

EXISTING EASEMENT LINE

INSTALL THREE PHASE TRANSFORMER PAD (6'X 7' - SMALL OR 7'X8') (BY CONTRACTOR)

INSTALL THREE PHASE TRANSFORMER (BY IDAHO FALLS POWER)

EXISTING THREE PHASE TRANSFORMER (7'X 8')

(PROVIDED BY IDAHO FALLS POWER-INSTALLED BY CONTRACTOR)

INSTALL SINGLE / THREE PHASE SECTIONALIZING CABINET (BY IDAHO FALLS POWER)

EXISTING SINGLE / THREE PHASE SECTIONALIZING CABINET

INSTALL SINGLE PHASE TRANSFORMER BASE (PROVIDED BY IDAHO FALLS POWER-INSTALLED BY CONTRACTOR). INSTALL

ONE -10' LENGTH OF 2-1/2" PVC SECONDARY SERVICE CONDUIT FROM THE CENTER OF EACH TRANSFORMER IN BOTH

DIRECTIONS AT 45° ANGLE INTO EACH LOT. UNLESS OTHERWISE NOTED. CAP END OF CONDUITS AND MARK WITH 2X4).

EXISTING SINGLE PHASE TRANSFORMER

INSTALL POWER POLE / INSTALL POWER POLE WITH ANCHOR GUY

EXISTING POWER POLE / EXISTING POWER POLE WITH ANCHOR GUY

INSTALL POWER POLE WITH OVER-HEAD TRANSFORMER (PHASE NOTED BY COLOR)

EXISTING POWER POLE WITH OVER-HEAD TRANSFORMER TO BE MOVED OR REMOVED

INSTALL CITY OF IDAHO FALLS STANDARD STREET LIGHT

EXISTING CITY OF IDAHO FALLS STANDARD STREET LIGHT

INSTALL SMALL/LARGE FIBER OPTIC JUNCTION BOX

EXISTING SMALL/LARGE FIBER OPTIC JUNCTION BOX

INSTALL SECONDARY PEDESTAL(PROVIDED BY IDAHO FALLS POWER-INSTALLED BY CONTRACTOR). INSTALL ONE -10'

LENGTH OF 2-1/2" PVC SECONDARY SERVICE CONDUIT FROM THE CENTER OF EACH SECONDARY PEDISTAL IN BOTH

DIRECTIONS AT 45° ANGLE INTO EACH LOT. UNLESS OTHERWISE NOTED. CAP END OF CONDUITS AND MARK WITH 2X4).

EXISTING SECONDARY PEDESTAL

EXISTING METER

INSTALL JUNCTION BOX

EXISTING JUNCTION BOX

JB

JB

M

P

P

INSTALL SINGLE / THREE PHASE SECTIONALIZING CABINET BASE

Z P

U B

L I C

W

O R

K S P

A R

K S

P

R O

J E C

T S I d a h o

F a l l s

A i r p o r t n e w l i g h t i n g

D e s i g n M a p s

I F P

E l e c t r i c a l

D e s i g n

A i r p o r t

N e w

L i g h t i n g d w g

A

M g c a m p b e